REPAIR MAINT UPKEEP OF EM WATER SUPPLY INSTALLATIONS AT AIR FORCE STATION CHAKERI KANPUR

Amount

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m depth in soft / loose soil and getting out for removing / laying of pipe /cable complete all as specified and directed.

Returning and filling inclcluding spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

M&L for bricks protection cover to under ground cable (with old size sub class ‘B’ bricks kiln burnt) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm complete all as specified and directed.

M&L for dry river sand for cushiononing for laying cable (8cm thick before laying of cable and 15 cm over the cable) in trenches complete all as specified and directed. Note: Punned thickness will be measured.

M&L for boring under road/pavement/ hard standing by mechanical method 1.00m below the top surface of road/pavement/ hard standing complete for passing through cable including 50mm bore dia GI pipe medium grade complete all as specified and directed. NOTE :- Cable will be measured and paid for separately. Any damage to existing cables of any type will made good by the tenderer without any extra payment.

M&L for construction of valve chamber in replacement 1200mm x 1200mm x 1200mm (internal dimensions), 6mm thick MS sheet cover with 2 Nos MS hinges welded to MS angle iron frame of 40mmx40mmx6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:6) 230 mm thick, 150 mm thick PCC bed (1:4:8) type D2, 15mm thick cement plastering in cement mortar (1:4), finishing complete and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit chamber complete all as specified and directed.

All as per item No. 7.00 above but of size 1000mmx1000mmx1000mm

All as per item No. 7.00 above but of size 900mmx900mmx900mm

All as per item No. 7.00 above but of size 600mmx600mmx600mm

M&L for repairing, servicing and maintenance of sluice valve of size 150 mm by means of carrying out proper inspection and replacement of defective parts which required at site including necessary gland after complete all as specified and directed. Note:- Spare parts (Item No 12 to 28) required for repair shall be measured and paid separately under respective item.

Supply only body complete all as specified and directed.

Supply only Bonnet complete all as specified and directed.

Supply only Solid wedge complete all as specified and directed.

Supply only Body seats complete all as specified and directed.

Supply only stem complete set all as specified and directed.

Supply only Back seats complete set all as specified and directed.

Supply only gland follower complete set all as specified and directed.

Supply only Gland flange complete all as specified and directed.

Supply only stem nut complete all as specified and directed.

Supply only hand wheel complete all as specified and directed.

Supply only hand wheel nut complete all as specified and directed.

Supply only stud bolts complete all as specified and directed.

Supply only stud nut complete all as specified and directed.

Supply only bonnet gasket complete all as specified and directed.

Supply only lubricator complete all as specified and directed.

Supply only packing complete all as specified and directed.

Supply only yoke nut complete set all as specified and directed.

M&L for repairing, servicing and maintenance of sluice valve of size 100 mm by means of carrying out proper inspection and replacement of defective parts which required at site including necessary gland after complete all as specified and directed. Note:- Spare parts (Item No 30 to 46) required for repair shall be measured and paid separately under respective item .

Supply only body complete all as specified and directed.

Supply only Bonnet complete all as specified and directed.

Supply only Solid wedge complete all as specified and directed.

Supply only Body seats complete all as specified and directed.

Supply only stem complete set all as specified and directed.

Supply only Back seats complete set all as specified and directed.

Supply only gland follower complete set all as specified and directed.

Supply only Gland flange complete all as specified and directed.

Supply only stem nut complete all as specified and directed.

Supply only hand wheel complete all as specified and directed.

Supply only hand wheel nut complete all as specified and directed.

Supply only stud bolts complete all as specified and directed.

Supply only stud nut complete all as specified and directed.

Supply only bonnet gasket complete all as specified and directed.

Supply only lubricator complete all as specified and directed.

Supply only packing complete all as specified and directed.

Supply only yoke nut complete set all as specified and directed.

M&L for repairing, servicing and maintenance of sluice valve of size 200 mm by means of carrying out proper inspection and replacement of defective parts which required at site including necessary gland after complete all as specified and directed. Note:- Spare parts (Item No 48 to 64) required for repair shall be measured and paid seprately under respective item.

Supply only body complete all as specified and directed.

Supply only Bonnet complete all as specified and directed.

Supply only Solid wedge complete all as specified and directed.

Supply only Body seats complete all as specified and directed.

Supply only stem complete set all as specified and directed.

Supply only Back seats complete set all as specified and directed.

Supply only gland follower complete set all as specified and directed.

Supply only Gland flange complete all as specified and directed.

Supply only stem nut complete all as specified and directed.

Supply only hand wheel complete all as specified and directed.

Supply only hand wheel nut complete all as specified and directed.

Supply only stud bolts complete all as specified and directed.

Supply only stud nut complete all as specified and directed.

Supply only bonnet gasket complete all as specified and directed.

Supply only lubricator complete all as specified and directed.

Supply only packing complete all as specified and directed.

Supply only yoke nut complete set all as specified and directed.

M&L for earthing complete (in replacement) with galvanised MS earth plate of size 600mm x 600mm x 6mm thick burried directly in ground not less than 2.25 m below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers, connected by GI earth strip of size 32mm x 6mm thick, soldered and revetted to earth plate. GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess including necessary earth work and disposal of surplus soil to a distance not less than 50 m etc complete all as specified and shown in electrical plate No 3 of SSR Part-I.

M&L for testing of old earthing using calibrated earth tester & submitting result to Engr -in -Charge. Earthing which showing much more results as specified in IS rule and disconnetivity should be replaced with new earthing items are considered as below. Note : (i) Watering of earthing with 2 Buckets (30Ltrs) water mixed with salt (total 5Kg) shall be carried out one day before the testing & the cost of the same shall deemed included in unit quoted rate.

S&F in replacement GI strip 32mmx6mm on wall/batten or recessed or buried in ground complete all as specified and directed.

Supply, laying, jointing, testing and commissioning LT XLPE insulated armoured LT 1100 volt grades heavy duty with aluminium stranded conductor of size 95 sqmm 3.5 core cable passing through pipes/ in duct/ on poles/in trenches etc complete including taking down old unserviceable cable complete all as specified & directed Make:- Havells/Polycab/Gloster Note:- The rate of termination and connecting of cable including provinding suitable size and nos of lugs by crimping as directed and specified shall be deemed to be included in quoted this item rate.

All as per item No 68.00 above but size 50 Sqmm, 3.5 core complete all as specified and directed.

Supply & filling of transformer oil in voltage stabliser in situ/at site for toping up the level of oil having dielectric strength 40 - 60 KV during filling after initial filtration conforming to IS-335. Transformer oil shall be supplied in sealed container and empty barrel of transformer oil will be deposited by contractor in E/M store yard complete all as specified and directed. Make :- HP/BPL/ IOC.

Dehydration/ filtration of transformer oil of existing voltage stabliser installed at site with portable plant to improve the dielectric strength 40 to 60 KV during filling after initial filtration including testing of dielectric strength after dihydration at site.

M&L for cutting of worn out aluminium cable terminal lugs from the LT cable, crimping of new aluminium cable core, lugs suitable size and fixing with stabilizer, terminal stud including cutting/dressing of cable, excavation surface after providing redressing of excavated surface after providing sand cushioning and brick protection complete all as specified and directed.

S&F in replacement fully automatic star delta starter for submerssible pump set including connecting all incoming and outgoing copper wire complete all as specified and directed . Make- L&T cat part No-MU-G 30/Siemens/ABB

S&F in replacement fully automatic star delta starter for submerssible pump set including connecting all incoming and outgoing copper wire complete all as specified and directed . Make- L&T cat part No-MU-G 50/Siemens/ABB

S&F in replacement LED type integral LED Aviation light Beacon 300 LED’s 12 Watt comprising of aluminium housing with polycarbonate enclosure with all necessary connection complete all as specified and directed. Make-Bajaj/Crompton/Philips

S&F in replacement 2.5 sqmm 2 core copper flexible cable with suitable clamps complete all as specified and directed . Make-Havells/Finolex/Polycab

S&F in replacement MCCB TP, 415V, 100 Amps with breaking capacity 10 KA complete all as specified and directed . Make- L&T/Legrand/Siemens

S&F in replacement MCCB TP, 415V, 200 Amps with breaking capacity 25 KA complete all as specified and directed . Make- L&T/Legrand/Siemens

S&F in replacement sheet metal enclosure factory fabricated for MCB distribution board Single pole and neutral 240 Volts, 8 way with neutral and earth bus bar having IP-42 protection and double metal door concealed/flush to wall surface including making connections with thimbles as required complete all as specified and directed.

All as per item No. 79.00 above but Single pole and neutral 240 Volts, 4 way.

S&F in replacement MCB Single pole and neutral, 63 Amps, 10 KA, 'C' curve, 240 Volts complete all as specified and directed.

S&F in replacement MCB Single pole and neutral, 40 Amps, 10 KA, 'C' curve, 240 Volts complete all as specjfied and directed.

S&F in replacement MCB single pole, 6 to 20 Amps, 240 Volts, 'C' curve 10 KA complete all as specified and directed.

S&F in replacement Pressure gauge size 100 mm dia round,range 0-10 Kg/cm2 complete with air cock for 15 mm dia GI pipe complete all as specified and directed . Make- H guru/Japson

Supply, install and testing of high pressure single head gear motored dozing pump of suitable for 20000 to 25000 GPH discharge capacity, line pressure of 3 Kg/cm2 and chlorination requirement from 0.5PPM to 5 PPM with accessories including lead, connecting nuts, injection check valve, clay weight, ferrules, dozing system consisting of 50 to 100 litres PE/FRE tank with lid, level gauge, single phase electric motor and agitator with shaft and blade mounted on tank. Lid must have port hole for pouring grannular chlorination chemical and water when necessary. Lid must have provision for mounting dozing pump on the lid/wall complete all as specified and directed. ( Note:- Liquid end of the dozing pump including accessories shall be of non metallic). Make:- Declibac Technologies (P) Ltd. / Shree Rayalaseema Hi Strength Hypo Ltd. as approved by GE

S&F in replacement LED tube light fitting box type alongwith LED tube rod 20 watts and fix with ceiling rose complete all as specified and directed. Make: Havells Cat No LHEWEBP71N1WO20 or equivalent in Bajaj/ Philips as approved by GE.

S&F in replacement sluice valves 200 mm dia class PN-1.6 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as specified and directed. Make Kirloskar /Upadhaya /GDPA/Kartar

All as per item No. 87.00 above but 150mm bore

All as per item No. 87.00 above but 100mm bore

S&F in replacement water heater storage type, 25 litre capacity suitable for high pressure up to 8 bar (G+18 Floor) of wattage 2 kw, single phase 230 volt, 50 Hz of BEE 5 star rated complete all as specified and directed. Make-Racold/Jaguar/Bajaj/Havells Note:- Old water heater deposited to store yard of AGE(E/M)-II.

Supply, installation, commissioning & testing (in replacement) of LT Bus Bar Panel of size 650mmX600mmX300mm ,made out by CPRI approved panel manufacturer 415 volts, TPN wall / floor mounted on suitable angle iron frame outdoor type cubical made out of 2 mm thick CRCA sheet weather, dust & vermin proof with rubber gasket with high class powder coating internally & externally fixing in position by provision of nut and bolts & addition/ alteration required for fixing existing cables and connecting the all incoming/outgoing cables by suitable size of aluminium lugs stands nuts, bolts & washers including to accommodate properly following control switches:- (a) Aluminium bus bar TPN 200 Amps rating made of high conductivity aluminium strip of suitable length with sleeves.- 01 Set

keerti trading corporation

NEW TECH ELCTRICALS

PAWAN COOL CORPORATION