61/2025-26 Various Type Of Fabrication Work Under Sub. Div. Ramgarh Pachwara

Turning of various sizes of CID Joints Class - 10/15 Complete set (Labour charges), The Joints will be supplied by Junior Engineer Concern Of Department and carting to workshop and after turning of these joins, firm liable to transport upto Junior Engineer Concerns store own his Cost.

80 mm Dia

100 mm Dia

125 mm Dia

150 mm Dia

200 mm Dia

Threading on GI Pipes different Diameter as Below ( Rate Per Mouth Threading). The Pipe will be supplied by Junior Engineer Concern Of Department and carting to workshop and after turning of these pipes, firm liable to transport upto Junior Engineer Concerns store own his Cost.

Cutting Of GI/MS/CI Pipes of any class as below (Rate per Mouth - one cutting only making two pieces). The pipes Will be supplied by the Department.

Welding on MS/GI/CI Pipes and other material by Electric welding, this includes all the material like welding rods/ equipment like welding machine / generater, if required fir Job.

At workshop

On site

Providing, Fabrication of Mild steel, Plane Ended / Flanged Spacials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipe, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site Conditions and as directed by the EIC complete in all respect.

Making Hole (Only Labour Charges) by drill machine in MS/CI/DI pipes and Specials. Per Hole rate

Up to 12 mm Dia Hole

Making of GI Assembly pipe for various sizes including threading, tightening,welding of flange and welding with MS patti, holes and cable grove making as per required length of 3.00 M/6.00 M ( pipes and Flangse shall be provided and carting these to workshop by the Department). Length of MS strip will be 100 mm, width -20 mm and thickness - 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standrad size and above 12 mm dia. in size. After tightening the pipe and flanged,welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly pipes, the firm is liable to transport these to concerns divisional store own his cost.

Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes.

Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Chuck Nut including material for the following sizes.

Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Providing of U plate ( U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate Including material for the following sizes.

Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Supplying of MS Rods and Chuck Nut ( Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes.

Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Making Direct pump piece with heavy duty pipes ( Class- B) and flanges (as per table - D) including cutting of pipe, threading welding and MS strip for length - 100 mm, width -20 mm and thickness - 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at juction of flange and pipe complete in all respect including cost of material. The Length of Direct pump piece will be 30 cm ( 300 mm).

2´´ dia. Size (50 mm)

Making Reducer pump piece with heavy duty pipes ( Class- B) and flanges (as per table - D) including cutting of pipe, threading welding and MS strip for length - 100 mm, width -20 mm and thickness - 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at juction of flange and pipe complete in all respect including cost of material. The Length of Direct pump piece will be 30 cm ( 300 mm).

2´´ x 2´´ ½dia. Size (50 x 65 mm)

Please Enable Macros to View BoQ information