Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Package Name Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation

Specification No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864)

1 Fill up only green shaded cells in Sch-1, Sch-2, Sch-3, Sch-4, Sch-7 and Bid Form 2nd Envelope.

2 All the cells in Sch-5 & Sch-6 are auto filled, therefore no cell is required to be filled up there.

3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.

4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

II This Workbook consists of following worksheets :

Opening page of the workbook.

Names of Bidder :

● Select Sole Bidder or JV (Joint Venture) from the pull down menu. Do not leave this cell blank.

● Select nos. of the JV Partners other than the Lead Partner from drop down menu.

● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.

● Fill up names and address of the Sole Bidder and /or Joint Venture.

● Fill up date in dd-mmm-yyyy format from drop down menu.

● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.

Sch-1 (Ex-works Prices) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.

● Select either Direct or Bought-out from the drop down menu. Do not leave the cell blank the same shall be deemed to be Bought-out if the cell is left blank.

● Total amount shall get calculated automatically.

● Type Test charges shall appear automatically after filling up Sch-7 appropriately.

Sch-2 (Freight & Insurance Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-3 (Erection Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-4 (Training Charges) :

● Not applicable, hence no cell is required to be filled up.

Sch-4b (Maintenance Charges during and after Defect Liability Period) :

● Not applicable, hence no cell is required to be filled up.

Sch-5 (Summary of Taxes and Duties applicable on the Goods) :

● No cell is required to be filled in by the bidder in this worksheet.

● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.

● No cell is required to be filled in by the bidder in this worksheet.

Sch-7 (Type Test Charges) :

● Fill up the rates & location where type tests are proposed.

● Total of this Sch-7 shall automatically appear in Sch-1.

Bid from 2nd Envelope :

● Fill up ref. no. as bidder's ref no. of this letter.

● This letter shall consider the net price as per Sch-6 (After Discount).

● Fill up names & Designation of the representatives of other JV partner(s) if the bidder is JV (Joint Venture) .

● Fill up additional information as required.

Happy Bidding !

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Sole Bidder 1 Sole Bidder 1

Joint Venture 2 or More JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 1 0 Sole Bidder 1 0

Name of Sole Bidder …….. …….. …….. …….. …….. ……..

Address of Sole Bidder …….. …….. …….. …….. …….. ……..

Name of other Partner - 1

Address of other Partner - 1

Name of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

Address of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

email ID of Bid Signatory

Mobile No. of Bid Signatory

Tel No. of Bid Signatory

Fax No. of Bid Signatory

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 1 Schedule - 1 Direct Total 0 Sole Bidder `

BO Total #REF! 0

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

PLANT AND EQUIPMENT (INCLUDING MANDATORY SPARES PARTS) TO BE SUPPLIED, INCLUDING TYPE TEST CHARGES FOR TESTS TO BE CONDUCTED Direct

All Prices are in Indian Rupees. Bought-Out

SI. No. PR No PR Line Item No Activity Description Material Code HSN Code/ MATERIAL CODE Whether HSN in column ‘ 6 ’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable (in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Item Description Unit Qty. Unit Ex-works price (excluding GST) Total Ex-works price (excluding GST) GST Tax as confirmed by Bidder

PART A (Substation Portion)

I SUPPLY ITEMS Revaluation of J column Tax Calculation

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

NOT APPLICABLE Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

Included 0.00 0 0.00

48 1000003409 18 Included

49 1000006285 18 Included

50 1000017518 18 Included

51 1000022512 18 Included

52 1000071061 18 Included

53 1000071062 18 Included

54 1000022487 18 Included

Total Ex-works Price 0.00 0.00

Total Type Test charges as per Schedule-7 0.00

Total Ex-works Price including Type Test charges 0.00

Total GST Tax as confirmed by Bidder 0.00

Note : Specify amount of GST on the transaction between the Contractor and the Employer.

* In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Place : Printed Name :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 1 Direct Total 0 Sole Bidder `

BO Total #REF! 0

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(SCHEDULE OF RATES AND PRICES : EX-WORKS PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2

Plant and Equipment (including Mandatory Spares Parts) to be supplied, including Type Test Charges for Tests to be conducted. Direct

All Prices are in Indian Rupees. Bought-Out

SI. No. Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct / Bought-out)

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

Total Ex-Works Price Direct 0.00 Direct

Total Ex-Works Price Bought Out 0.00

Total Ex-Works Price 0.00

Total Type Test charges as per Schedule-7 #REF! #REF! #REF!

Total Ex-works Price including Type Test charges #REF! #REF! #REF!

Discount Sch-1 #REF! MPD Sch-1 #REF!

Dis Alert #REF!

Note : Specify amount of Excise Duty, Sales Tax/'VAT and other taxes payable on the transaction between the Contractor and the Employer and octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items (to be identified in the Contract), which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit), separately in Schedule-5. Excise Duty, Sales tax and other levies for all the bought-out items are to be included in the EXW Price (Col. No. 5) only and not to be indicated in Schedule-5.

Place : Printed Name :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 2

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

LOCAL TRANSPORTATION, IN-TRANSIT INSURANCE, LOADING AND UNLOADING

All Prices are in Indian Rupees.

SI. No. PR No PR Line Item No Activity Description Material Code Description Unit Quantity Unit Freight, In-transit Insurance, loading & unloading Charges Total Freight, In-transit Insurance, loading & unloading Charges

PART A (Substation Portion)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

1 420kV, 3150A, 63kA Circuit Breaker (3-Phase) without closing resistor and with Support Structure Included

2 420 kV, 3000A, 63KA, 1-Phase Current Transformer with 120% extended current rating Included

3 420kV, 3150A, 63KA, Isolator (3-phase)(Double Break) with one E/S Included

4 336kV Surge Arrester (1-phase) Included

5 420 kV, 1 phase Bus Post Insulator (except for Line Traps) NOT APPLICABLE Included

6 Controlled Switching Device for 420 kV, 3-ph Circuit Breaker Included

7 245kV, 1600A, 50KA Circuit Breaker(3-Phase) with support structure Included

8 245 kV, 1600A, 50KA, 1-Phase Current Transformer with 120% extended current rating Included

9 245kV, 1600A, 50 KA, 3-phase DoubleBreak Isolator with one E/S Included

10 245kV, 1600A, 50 KA, 3-phase DoubleBreak Isolator with two E/S Included

11 245KV, 1600 A, 50KA, 3-PHASE, DOUBLE BREAK TANDEM ISOLATOR WITHOUT E/S Included

12 216kV Surge Arrester (1-phase) Included

13 245 kV, 1 phase Bus Post Insulator (except for Line Traps) Included

14 Erection Hardware for 220kV layout (Double Main and Transfer Scheme)-Transformer Bay as per technical specification Included

15 400kV Circuit Breaker Relay Panel without Auto Reclose (with Automation) Included

16 400kV Transformer Protection Panel (For both HV & MV side)-(with Automation) Included

17 Augmentation of existing 400kV bus bar protection scheme Included

18 220kV Circuit Breaker Relay Panel without Auto Reclose (withAutomation) Included

19 Augmentation of existing 220kV bus bar protection scheme Included

20 1.1KV GRADE 3.5CX300 SQMM (XLPE) POWER CABLE Included

21 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE Included

22 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE Included

23 1.1KV GRADE 4CX6 SQMM (PVC) POWER CABLE Included

24 1.1KV GRADE 2CX6 SQMM (PVC) POWER CABLE Included

25 1.1KV GRADE 3CX2.5 SQMM CONTROL CABLE Included

26 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE Included

27 1.1KV GRADE 7CX2.5 SQMM CONTROL CABLE Included

28 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE Included

29 1.1KV GRADE 14CX2.5 SQMM CONTROL CABLE Included

30 1.1KV GRADE 19CX1.5 SQMM CONTROL CABLE Included

31 1.1KV GRADE 27CX1.5 SQMM CONTROL CABLE Included

32 4PAIR, 0.5SQMM SCREENED CABLE Included

33 HVW spray system, Hydrant system and complete U/G & O/G piping andaccessories etc. out side the pump house for 500MVA , 400KV/220/33kV, 3-phase Autotransformer Included

34 4.5 kg CO2 type Portable Fire extinguisher Included

35 Fire Detection and Alarm System for Switchyard Panel Room of 9 mlength Included

36 Lighting Panel type ACP-2 as per technical specification Included

37 63A, 415V : Interlocked switch socket outdoor Receptacle (type RP) asper technical specifications Included

38 Outdoor Power Receptacle for oilfiltration unit (250A) Included

39 LED FLOOD LIGHT LUMINARIESTYPE FL-1 (150W) AS PER TECHNICALSPECIFICATION Included

40 LIGHTING FIXTURE LED LUMINAIRES TYPE FL2 AS PER TECH. SPECIFICATIONS Included

41 Illumination System for switchyard panel room of 9 m length Included

42 DIGITAL RTCC PANEL Included

43 Erection Hardware for 400kV D type layout-Spare bay of half dia. asper technical specification Included

44 Erection Hardware for 400kV D type layout-Transformer bay as per technical specification Included

45 Erection Hardware for 400kV D type layout-Bus Work (For one diameter)as per technical specification Included

46 Augmentation of Substation automation System for 220kV bay as perTechnical Specification Included

47 Augmentation of Substation automation System for 400kV Tie bay as perTechnical Specification Included

48 Augmentation of Substation automation System for 400kV Main bay as perTechnical Specification Included

49 Air conditioning system for Switchyard Panel Room of 9m length Included

50 PMU with GPS Clock (clock can be either internal or external) Included

51 WAMS Hardware - Time System (GPS receiver) Included

52 SUBSTATION GRADE LAYER 2 LAN SWITCH Included

53 SUBSTATION GRADE LAYER 3 LAN SWITCH Included

54 WAMS Miscellaneous - Armored Fibre Optic Cable and associatedtermination (e.g. L2 Switch) for connecting PMU panels located indifferent control room of a station Included

55 LIU - FO PATCH PANEL-12 PORT Included

56 Fabrication, galvanising and supply of Lattice Structures (MS Steel),to be designed during detailed engineering, for towers, beams andequipment support structure including pack plates / packwashers andgusset plates excluding fasteners and foundation bolts Included

57 Fabrication, galvanising and supply of fasteners ( nuts, bolts andwashers ) including step bolts for lattice and pipe structures to bedesigned during detailed engineering Included

58 Fabrication, galvanising and supply of foundation bolts including nuts,checknut and washers for lattice and pipe structures to be designedduring detailed engineering Included

Total F&I Price 0.00

Place: Printed Name :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 2 Dis

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation As per Lum-sum 0

(SCHEDULE OF RATES AND PRICES : FREIGHT & INSURANCE CHARGES) AS per Percent #REF!

As per lum-sum on Sch-2 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-2 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002 Multipackage Discount 0.00%

All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

SI. No. Description Unit Quantity Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

Total F&I Price #REF!

Place : Printed Name :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 3

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!

As per lum-sum on Sch-3 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002 Multipackage lum-sum 0.00%

INSTALLATION CHARGES Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

All Prices are in Indian Rupees.

SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Erection Charges Total Erection Charges Total GST as confirmed by Bidder Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges

PART A (Substation Portion)

I INSTALLATION Revaluation of J column Tax Calculation

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

1 Carriage of materials by mechanical transport including loading, unloading and stacking, lead up to 1KM: Earth 18 Carriage of materials by mechanical transport including loading, unloading and stacking, lead up to 1KM: Earth cum 100 Included 0.00 0 0

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed: All kinds of soil 18 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed: All kinds of soil cum 575 Included 0.00 0 0

3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.: All kind of soil 18 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.: All kind of soil cum 336 Included 0.00 0 0

4 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil : Pipes, cables etc. not exceeding 80 mm dia. 18 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil : Pipes, cables etc. not exceeding 80 mm dia. mtr 200 Included 0.00 0 0

5 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: All kind of soil: Pipes, cables etc. exceeding 80mm dia. but not exceeding 300mm dia. 18 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: All kind of soil: Pipes, cables etc. exceeding 80mm dia. but not exceeding 300mm dia. mtr 120 Included 0.00 0 0

6 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m. 18 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m. cum 911 Included 0.00 0 0

7 Supplying and filling in plinth with Jamuna/fine sand under floors including watering, ramming consolidating and dressing complete. 18 Supplying and filling in plinth with Jamuna/fine sand under floors including watering, ramming consolidating and dressing complete. cum 36 Included 0.00 0 0

8 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m: All kind of soil. 18 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m: All kind of soil. sqm 294 Included 0.00 0 0

9 Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos emulsifiable concentrate of 20 percent 18 Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos emulsifiable concentrate of 20 percent ltr. 147 Included 0.00 0 0

10 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration 18 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration mtr 70 Included 0.00 0 0

11 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1: 2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 18 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1: 2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 251 Included 0.00 0 0

12 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). 18 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). cum 2 Included 0.00 0 0

13 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size). 18 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size). cum 60 Included 0.00 0 0

14 Centring and shuttering including strutting, propping etc and removal of formwork for: Foundations, footings, bases of columns 18 Centring and shuttering including strutting, propping etc and removal of formwork for: Foundations, footings, bases of columns sqm 65 Included 0.00 0 0

15 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size). 18 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size). sqm 38 Included 0.00 0 0

16 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 18 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. sqm 56 Included 0.00 0 0

17 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 18 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. sqm 110 Included 0.00 0 0

18 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access 18 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access sqm 350 Included 0.00 0 0

19 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cast in Situ) 18 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cast in Situ) sqm 40 Included 0.00 0 0

20 Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beam, plinth beams, girders, bressumers and cantilevers. 18 Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beam, plinth beams, girders, bressumers and cantilevers. sqm 120 Included 0.00 0 0

21 Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts. 18 Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts. sqm 120 Included 0.00 0 0

22 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc including edges. 18 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc including edges. sqm 60 Included 0.00 0 0

23 Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured): Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 18 Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured): Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm 485 Included 0.00 0 0

24 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete( for upto plinth/above plinth) : Thermo- Mechanically Treated bars. 18 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete( for upto plinth/above plinth) : Thermo- Mechanically Treated bars. kg 15510 Included 0.00 0 0

25 Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 18 Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. mtr 74 Included 0.00 0 0

26 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum 18 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum cum 51 Included 0.00 0 0

27 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level, Concrete of M25 grade with minimum cement content of 330 kg /cum 18 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level, Concrete of M25 grade with minimum cement content of 330 kg /cum cum 90 Included 0.00 0 0

28 Add for using extra cement in the items of design mix over and above the specified cement content therein. 18 Add for using extra cement in the items of design mix over and above the specified cement content therein. Quintal 100 Included 0.00 0 0

29 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 18 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) cum 79 Included 0.00 0 0

30 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 18 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) cum 80 Included 0.00 0 0

31 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 18 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 29 Included 0.00 0 0

32 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 300 x 16mm 18 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 300 x 16mm each 3 Included 0.00 0 0

33 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 250 x 16mm 18 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 250 x 16mm each 3 Included 0.00 0 0

34 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 250 x 10mm 18 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 250 x 10mm each 10 Included 0.00 0 0

35 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete : 150x10 MM 18 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete : 150x10 MM each 10 Included 0.00 0 0

36 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size: 125mm 18 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size: 125mm each 6 Included 0.00 0 0

37 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper 18 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper each 4 Included 0.00 0 0

38 Providing & fixing aluminium casement stays ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete 18 Providing & fixing aluminium casement stays ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete each 6 Included 0.00 0 0

39 Structural Steel work riveted, bolted or welded in built up sections, trusses & framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 18 Structural Steel work riveted, bolted or welded in built up sections, trusses & framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete kg 3000 Included 0.00 0 0

40 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No. 2 and M.S. top cover of required thickness for rolling shutters: 80 x 1.25mm M.S. laths with 1.25mm thick top cover 18 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No. 2 and M.S. top cover of required thickness for rolling shutters: 80 x 1.25mm M.S. laths with 1.25mm thick top cover sqm 16 Included 0.00 0 0

41 Providing and fixing ball bearing for rolling shutters. 18 Providing and fixing ball bearing for rolling shutters. each 2 Included 0.00 0 0

42 Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area 18 Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area sqm 2 Included 0.00 0 0

43 Providing and fixing MS fan clamp type I of 16mm dia MS bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete 18 Providing and fixing MS fan clamp type I of 16mm dia MS bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete each 6 Included 0.00 0 0

44 Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. 18 Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. kg 200 Included 0.00 0 0

45 52mm thick cement concrete flooring with "Hardcrete" concrete hardener topping under layer 40mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick Hardcrete concrete hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6mm nominal size) by volume with which Hardcrete hardening compound of Snowcem India Ltd. or equivalent is mixed @ 2 litre Hardcrete per 50kg of cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 18 52mm thick cement concrete flooring with "Hardcrete" concrete hardener topping under layer 40mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick Hardcrete concrete hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6mm nominal size) by volume with which Hardcrete hardening compound of Snowcem India Ltd. or equivalent is mixed @ 2 litre Hardcrete per 50kg of cement including cement slurry, but excluding the cost of nosing of steps etc. complete. sqm 230 Included 0.00 0 0

46 Cement plaster skirting (up to 30cm height) with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement: 18mm thick 18 Cement plaster skirting (up to 30cm height) with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement: 18mm thick sqm 60 Included 0.00 0 0

47 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 18 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. sqm 240 Included 0.00 0 0

48 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 5 Included 0.00 0 0

49 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, Size of Tile 600x600 mm 18 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, Size of Tile 600x600 mm sqm 10 Included 0.00 0 0

50 Providing gola 75x75 mm in cement concrete 1:2:4(1 cement : 2 coarse sand : 4 stone aggregate 10mm anddown) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75mm deep chase. 18 Providing gola 75x75 mm in cement concrete 1:2:4(1 cement : 2 coarse sand : 4 stone aggregate 10mm anddown) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75mm deep chase. mtr 106.4 Included 0.00 0 0

51 Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over PVC sheet 1m x 1m x 400 micron finished with 12mm cement plaster 1:3 (1 cement : 3 corase sand) and a coat of neat cement rounding the edges and making and finishing outlet complete. 18 Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over PVC sheet 1m x 1m x 400 micron finished with 12mm cement plaster 1:3 (1 cement : 3 corase sand) and a coat of neat cement rounding the edges and making and finishing outlet complete. each 6 Included 0.00 0 0

52 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes :110 mm diameter 18 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes :110 mm diameter mtr 50 Included 0.00 0 0

53 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion : Single tee with door 110x110x110 mm 18 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion : Single tee with door 110x110x110 mm each 12 Included 0.00 0 0

54 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion: 110mm bend 18 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion: 110mm bend each 10 Included 0.00 0 0

55 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion: 110mm shoe 18 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion: 110mm shoe each 10 Included 0.00 0 0

56 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brickwork & fixing in cement mortar 1:4 ( 1 cement 4 coarse sand ) and making good the wall etc. complete. : 110mm 18 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brickwork & fixing in cement mortar 1:4 ( 1 cement 4 coarse sand ) and making good the wall etc. complete. : 110mm each 30 Included 0.00 0 0

57 12mm cement plaster of mix: 1:6 (1 cement: 6 fine sand) 18 12mm cement plaster of mix: 1:6 (1 cement: 6 fine sand) sqm 440 Included 0.00 0 0

58 15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) 18 15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) sqm 440 Included 0.00 0 0

59 6mm cement plaster to ceiling of mix: 1:3 (1 cement: 3 find sand) 18 6mm cement plaster to ceiling of mix: 1:3 (1 cement: 3 find sand) sqm 210 Included 0.00 0 0

60 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including priming coat with cement primer. 18 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including priming coat with cement primer. sqm 350 Included 0.00 0 0

61 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm) 18 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm) sqm 350 Included 0.00 0 0

62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 18 Painting with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 65 Included 0.00 0 0

63 Providing and fixing white vitreous china pedestal type water closet (European type WC pan) with seat & lid,10 litre low level white PVC flushing cistern with manually controlled device (handle liver) confirming to IS 7231, with all fitting and fixture complete including cuttings and making good the walls and floor wherever required: 18 Providing and fixing white vitreous china pedestal type water closet (European type WC pan) with seat & lid,10 litre low level white PVC flushing cistern with manually controlled device (handle liver) confirming to IS 7231, with all fitting and fixture complete including cuttings and making good the walls and floor wherever required: each 1 Included 0.00 0 0

64 Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, Kingston/ Gem/ Techno/ Parko, 32mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required: White Vitreous China: Flat back wash basin size 550x400mm with a single 15mm C.P. brass pillar tap. 18 Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, Kingston/ Gem/ Techno/ Parko, 32mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required: White Vitreous China: Flat back wash basin size 550x400mm with a single 15mm C.P. brass pillar tap. each 1 Included 0.00 0 0

65 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: Semi rigid pipe: 32mm dia 18 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: Semi rigid pipe: 32mm dia each 1 Included 0.00 0 0

66 Providing and fixing 100 mm sand cast Iron grating for gully trap. 18 Providing and fixing 100 mm sand cast Iron grating for gully trap. each 1 Included 0.00 0 0

67 Providing and fixing mirror of superior quality thickness of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm 18 Providing and fixing mirror of superior quality thickness of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm each 1 Included 0.00 0 0

68 Providing and fixing toilet paper holder: C.P. brass 18 Providing and fixing toilet paper holder: C.P. brass each 1 Included 0.00 0 0

69 Providing and fixing soil, waste and vent pipes: 100mm dia: Sand cast iron S&S pipe as per IS: 1729 18 Providing and fixing soil, waste and vent pipes: 100mm dia: Sand cast iron S&S pipe as per IS: 1729 mtr 12 Included 0.00 0 0

70 Providing and fixing soil, waste and vent pipes: 75mm dia: Sand cast iron S&S pipe as per IS: 1729 18 Providing and fixing soil, waste and vent pipes: 75mm dia: Sand cast iron S&S pipe as per IS: 1729 mtr 10 Included 0.00 0 0

71 Providing and filling the joints with spun yard cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I. / C.I. pipes: 75mm dia pipe 18 Providing and filling the joints with spun yard cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I. / C.I. pipes: 75mm dia pipe each 10 Included 0.00 0 0

72 Providing and filling the joints with spun yard cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I. / C.I. pipes: 100mm dia pipe 18 Providing and filling the joints with spun yard cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I. / C.I. pipes: 100mm dia pipe each 6 Included 0.00 0 0

73 Providing and fixing plain bend of required degree: 75mm dia: Centrifugally cast (spun) iron S&S pipe 18 Providing and fixing plain bend of required degree: 75mm dia: Centrifugally cast (spun) iron S&S pipe each 6 Included 0.00 0 0

74 Providing and fixing terminal guard: 100mm: Sand cast iron S and S as per IS-3989 18 Providing and fixing terminal guard: 100mm: Sand cast iron S and S as per IS-3989 each 1 Included 0.00 0 0

75 Providing and fixing collar: 75mm: Centrifugally cast (spun) iron S&S pipe 18 Providing and fixing collar: 75mm: Centrifugally cast (spun) iron S&S pipe each 4 Included 0.00 0 0

76 Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter: 75mm 18 Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter: 75mm each 4 Included 0.00 0 0

77 Providing and fixing cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 75mm outlet: Sand Cast Iron S and S.as per IS-3989 18 Providing and fixing cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 75mm outlet: Sand Cast Iron S and S.as per IS-3989 each 1 Included 0.00 0 0

78 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) exposed on wall 25mm dia. nominal bore. 18 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) exposed on wall 25mm dia. nominal bore. mtr 20 Included 0.00 0 0

79 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work): Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 15mm dia. nominal bore. 18 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work): Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 15mm dia. nominal bore. mtr 8 Included 0.00 0 0

80 Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. (external work): 25mm dia. nominal bore 18 Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. (external work): 25mm dia. nominal bore mtr 15 Included 0.00 0 0

81 Making connection of G.I. distribution branch with G.I. main of sizes by providing and fixing tee including cutting and threading the pipe etc. complete: 25 to 40mm dia. nominal bore 18 Making connection of G.I. distribution branch with G.I. main of sizes by providing and fixing tee including cutting and threading the pipe etc. complete: 25 to 40mm dia. nominal bore each 2 Included 0.00 0 0

82 Providing and fixing brass bib cock of approved quality: 15mm nominal bore 18 Providing and fixing brass bib cock of approved quality: 15mm nominal bore each 1 Included 0.00 0 0

83 Providing and fixing brass stop cock of approved quality.: 20 mm nominal bore 18 Providing and fixing brass stop cock of approved quality.: 20 mm nominal bore each 3 Included 0.00 0 0

84 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25mm nominal bore 18 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25mm nominal bore each 1 Included 0.00 0 0

85 Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats: 25mm nominal bore 18 Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats: 25mm nominal bore each 1 Included 0.00 0 0

86 Providing and fixing unplasticised PVC connection pipe with brass unions. 45cm length. 15mm nominal bore 18 Providing and fixing unplasticised PVC connection pipe with brass unions. 45cm length. 15mm nominal bore each 2 Included 0.00 0 0

87 Constructing masonry chamber 30x30x50cm inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4coarse sand) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. 18 Constructing masonry chamber 30x30x50cm inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4coarse sand) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. each 1 Included 0.00 0 0

88 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 20mm dia. Pipe 18 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 20mm dia. Pipe mtr 10 Included 0.00 0 0

89 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 25mm dia. Pipe 18 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 25mm dia. Pipe mtr 10 Included 0.00 0 0

90 Providing and filling sand of grading zone V or coarser grade alround the GI pipe in Extenal work - 25 mm diameter pipe 18 Providing and filling sand of grading zone V or coarser grade alround the GI pipe in Extenal work - 25 mm diameter pipe mtr 5 Included 0.00 0 0

91 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 15mm nominal bore 18 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 15mm nominal bore each 1 Included 0.00 0 0

92 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 20 mm nominal bore 18 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 20 mm nominal bore each 5 Included 0.00 0 0

93 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 25mm nominal bore 18 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 25mm nominal bore each 5 Included 0.00 0 0

94 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 18 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per ltr. 500 Included 0.00 0 0

95 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approve make conforming to IS:8931: 15mm nominal bore 18 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approve make conforming to IS:8931: 15mm nominal bore each 3 Included 0.00 0 0

96 Providing laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete: 150mm dia. 18 Providing laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete: 150mm dia. mtr 20 Included 0.00 0 0

97 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) alround S.W. pipes including bed concrete as per standard design: 150mm dia S.W. pipe 18 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) alround S.W. pipes including bed concrete as per standard design: 150mm dia S.W. pipe mtr 5 Included 0.00 0 0

98 Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design: 100x100mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 18 Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design: 100x100mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 5 Included 0.00 0 0

99 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slabs with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) finished with a floating coat of neat cement as per standard design: Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 18 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slabs with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) finished with a floating coat of neat cement as per standard design: Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1 Included 0.00 0 0

100 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 18 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1 Included 0.00 0 0

101 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 18 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 505 Included 0.00 0 0

102 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge.(Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 18 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge.(Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 150 Included 0.00 0 0

103 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 18 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 30 Included 0.00 0 0

104 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in-charge complete: Upto 5mm depth and 5 mm width 18 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in-charge complete: Upto 5mm depth and 5 mm width mtr 85 Included 0.00 0 0

105 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc to the side hung windows as per direction of Engineer- in-charge complete. 205 X 19 mm 18 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc to the side hung windows as per direction of Engineer- in-charge complete. 205 X 19 mm each 50 Included 0.00 0 0

106 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1: 5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1: 5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slopeand treating similarly the adjoining walls upto 300mm height including rounding of junctions adjoining walls upto 300mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20mm thick jointless cement mortar of mix 1: 4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge: With average thickness of 120mm and minimum thickness at khurra as 65mm. 18 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1: 5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1: 5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slopeand treating similarly the adjoining walls upto 300mm height including rounding of junctions adjoining walls upto 300mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20mm thick jointless cement mortar of mix 1: 4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge: With average thickness of 120mm and minimum thickness at khurra as 65mm. sqm 296.96 Included 0.00 0 0

107 Providing and laying Polythylene Sheet 125 micron over PCC (1:4:8) for road work complete in all respects at all levels 18 Providing and laying Polythylene Sheet 125 micron over PCC (1:4:8) for road work complete in all respects at all levels Sqm 937.5 Included 0.00 0 0

108 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) Cum 108.75 Included 0.00 0 0

109 Centering and shuttering including strutting, propping etc. and removalof form for : Foundations, footings, bases of columns, etc. for mass concrete 18 Centering and shuttering including strutting, propping etc. and removalof form for : Foundations, footings, bases of columns, etc. for mass concrete Sqm 100 Included 0.00 0 0

110 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 18 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 2544.197531 Included 0.00 0 0

111 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 18 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. Sqm 1087.5 Included 0.00 0 0

112 Supplying and stacking at site. 90 mm to 45 mm size stone aggregate 18 Supplying and stacking at site. 90 mm to 45 mm size stone aggregate Cum 139.2 Included 0.00 0 0

113 63 mm to 45 mm size stone aggregate 18 63 mm to 45 mm size stone aggregate Cum 99.6 Included 0.00 0 0

114 53 mm to 22.4 mm size stone aggregate 18 53 mm to 22.4 mm size stone aggregate Cum 92.331 Included 0.00 0 0

115 Stone screening 13.2 mm nominal size (Type A) 18 Stone screening 13.2 mm nominal size (Type A) Cum 72.038 Included 0.00 0 0

116 Moorum 18 Moorum Cum 28.013 Included 0.00 0 0

117 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . 18 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . Cum 311.25 Included 0.00 0 0

118 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavementsm all complete as per direction of the Engineer-in-Charge. 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. 18 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavementsm all complete as per direction of the Engineer-in-Charge. 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. Per cm width per cm depth per m length 120 Included 0.00 0 0

119 Providing and laying C.C. pavement with reinforced cement concrete, excluding the cost of centering, shuttering and reinforcement - All work up to plinth level. The concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 18 Providing and laying C.C. pavement with reinforced cement concrete, excluding the cost of centering, shuttering and reinforcement - All work up to plinth level. The concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 93.75 Included 0.00 0 0

120 Providing and laying Polythylene Sheet 125 micron over PCC (1:4:8) for road work complete in all respects at all levels 18 Providing and laying Polythylene Sheet 125 micron over PCC (1:4:8) for road work complete in all respects at all levels Sqm 1500 Included 0.00 0 0

121 CARRIAGE OF MATERIALS : By Mechanical Transport including loading,unloading and stacking Earth lead upto 1km 18 CARRIAGE OF MATERIALS : By Mechanical Transport including loading,unloading and stacking Earth lead upto 1km Cum 189.643 Included 0.00 0 0

122 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m 18 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 189.643 Included 0.00 0 0

123 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 18 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Sqm 1777.5927 Included 0.00 0 0

124 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 18 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 284.961 Included 0.00 0 0

125 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) Cum 150 Included 0.00 0 0

126 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) Cum 132.299 Included 0.00 0 0

127 Centering and shuttering including strutting, propping etc. and removalof form for : Foundations, footings, bases of columns, etc. for mass concrete 18 Centering and shuttering including strutting, propping etc. and removalof form for : Foundations, footings, bases of columns, etc. for mass concrete Sqm 152.658 Included 0.00 0 0

128 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 18 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 94.15 Included 0.00 0 0

129 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 18 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. Sqm 1500 Included 0.00 0 0

130 Supplying and stacking at site. 90 mm to 45 mm size stone aggregate 18 Supplying and stacking at site. 90 mm to 45 mm size stone aggregate Cum 192 Included 0.00 0 0

131 63 mm to 45 mm size stone aggregate 18 63 mm to 45 mm size stone aggregate Cum 144 Included 0.00 0 0

132 Stone screening 13.2 mm nominal size (Type A) 18 Stone screening 13.2 mm nominal size (Type A) Cum 39 Included 0.00 0 0

133 Moorum 18 Moorum Cum 48 Included 0.00 0 0

134 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . 18 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . Cum 300 Included 0.00 0 0

135 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavementsm all complete as per direction of the Engineer-in-Charge. 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. 18 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavementsm all complete as per direction of the Engineer-in-Charge. 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. Per cm width per cm depth per m length 405 Included 0.00 0 0

136 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 18 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Included 0.00 0 0

137 5/6 A switch 18 5/6 A switch Nos 3 Included 0.00 0 0

138 3 pin 5/6 A socket outlet 18 3 pin 5/6 A socket outlet Nos 3 Included 0.00 0 0

139 Supplying and fixing following size/module, GI box,along with modular base & cover plate for modular switches in recess etc. as required. 18 Supplying and fixing following size/module, GI box,along with modular base & cover plate for modular switches in recess etc. as required. Included 0.00 0 0

140 6 Module (200mm*75mm) 18 6 Module (200mm*75mm) Nos 3 Included 0.00 0 0

141 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 18 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Included 0.00 0 0

142 4 way (4 + 12), Double door 18 4 way (4 + 12), Double door EACH 1 Included 0.00 0 0

143 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and neutral 18 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and neutral EACH 6 Included 0.00 0 0

144 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.d.63 A 18 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.d.63 A EACH 1 Included 0.00 0 0

145 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 18 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. Included 0.00 0 0

146 1*1.5 sq.mm 18 1*1.5 sq.mm Meter 75 Included 0.00 0 0

147 2*4 sq.mm 18 2*4 sq.mm Meter 50 Included 0.00 0 0

148 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20mm 18 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20mm Meter 75 Included 0.00 0 0

149 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group A 18 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group A POINT 8 Included 0.00 0 0

150 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. GROUP A 18 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. GROUP A METER 40 Included 0.00 0 0

151 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 18 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required Included 0.00 0 0

152 2 X4sq. mm + 1 X 4sq. mm earth wire 18 2 X4sq. mm + 1 X 4sq. mm earth wire METER 30 Included 0.00 0 0

153 EARTHING WITH G.I EARTH PLATE 600X600X6MM THICK , INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSURE WITH COVER PLATE HAVING LOCKING ARRANGEMENT AND WATERING PIPE OF 2.7m long ETC WITH CHARCOAL /COKE AND SALT AS REQUIRED. 18 EARTHING WITH G.I EARTH PLATE 600X600X6MM THICK , INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSURE WITH COVER PLATE HAVING LOCKING ARRANGEMENT AND WATERING PIPE OF 2.7m long ETC WITH CHARCOAL /COKE AND SALT AS REQUIRED. EACH 1 Included 0.00 0 0

154 Supplying and laying 25mm X 5mm G.I strip at 0.50m below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required (jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 18 Supplying and laying 25mm X 5mm G.I strip at 0.50m below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required (jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) EACH 20 Included 0.00 0 0

155 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 18 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. EACH 4 Included 0.00 0 0

156 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 18 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. EACH 6 Included 0.00 0 0

157 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 18 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. EACH 4 Included 0.00 0 0

158 Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 18 Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. EACH 3 Included 0.00 0 0

159 Total 18 Total Included 0.00 0 0

160 Total DSR item (including 18% GST) 18 Total DSR item (including 18% GST) Included 0.00 0 0

161 Add escalation@ 5.66% as per latest price index 18 Add escalation@ 5.66% as per latest price index Included 0.00 0 0

162 Sub Total 1 ( DSR ITEM) Rs. 18 Sub Total 1 ( DSR ITEM) Rs. Included 0.00 0 0

163 supply of ceiling fan 1400mm (Havells make Pearl White Silver FHCSS1SPWS56 or euivalents) as per technical specification and as per direction of Engineer-In-charge 18 supply of ceiling fan 1400mm (Havells make Pearl White Silver FHCSS1SPWS56 or euivalents) as per technical specification and as per direction of Engineer-In-charge EACH 4 Included 0.00 0 0

164 Supply of LED Luminary type (Bajaj High Bay ) catalogue reference-BIHNK 100W WH NB TG SD-100W or equivalent as per technical specification and as per direction of Engineer-In-charge 18 Supply of LED Luminary type (Bajaj High Bay ) catalogue reference-BIHNK 100W WH NB TG SD-100W or equivalent as per technical specification and as per direction of Engineer-In-charge NOS 6 Included 0.00 0 0

165 Supply, laying and installation of 4CX16sqmm PVC insulated cable armoured from nearby source of Power as per GTP and as per direction of Engineer -In-Charge 18 Supply, laying and installation of 4CX16sqmm PVC insulated cable armoured from nearby source of Power as per GTP and as per direction of Engineer -In-Charge KM 0.5 Included 0.00 0 0

166 18 Included 0.00 0 0

167 18 Included 0.00 0 0

168 18 Included 0.00 0 0

169 18 Included 0.00 0 0

170 18 Included 0.00 0 0

171 18 Included 0.00 0 0

172 18 Included 0.00 0 0

173 18 Included 0.00 0 0

174 18 Included 0.00 0 0

175 18 Included 0.00 0 0

176 18 Included 0.00 0 0

177 18 Included 0.00 0 0

178 18 Included 0.00 0 0

179 18 Included 0.00 0 0

180 18 Included 0.00 0 0

181 18 Included 0.00 0 0

182 18 Included 0.00 0 0

183 18 Included 0.00 0 0

184 18 Included 0.00 0 0

185 18 Included 0.00 0 0

186 18 Included 0.00 0 0

187 18 Included 0.00 0 0

188 18 Included 0.00 0 0

189 18 Included 0.00 0 0

190 18 Included 0.00 0 0

191 18 Included 0.00 0 0

192 18 Included 0.00 0 0

193 18 Included 0.00 0 0

194 18 Included 0.00 0 0

195 18 Included 0.00 0 0

196 18 Included 0.00 0 0

197 18 Included 0.00 0 0

198 18 Included 0.00 0 0

199 18 Included 0.00 0 0

200 18 Included 0.00 0 0

201 18 Included 0.00 0 0

202 18 Included 0.00 0 0

203 18 Included 0.00 0 0

204 18 Included 0.00 0 0

205 18 Included 0.00 0 0

206 18 Included 0.00 0 0

207 18 Included 0.00 0 0

208 18 Included 0.00 0 0

209 18 Included 0.00 0 0

210 18 Included 0.00 0 0

211 18 Included 0.00 0 0

212 18 Included 0.00 0 0

213 18 Included 0.00 0 0

214 18 Included 0.00 0 0

215 18 Included 0.00 0 0

216 18 Included 0.00 0 0

217 18 Included 0.00 0 0

218 18 Included 0.00 0 0

219 18 Included 0.00 0 0

98 18 Included 0.00 0 0

Total Installation Charges 0.00 0 0

Total GST as confirmed by Bidder 0.00

* In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Place : Printed Name :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 3

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES : ERECTION CHARGES) AS per Percent #REF!

As per lum-sum on Sch-3 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002 Multipackage lum-sum 0.00%

All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

SI. No. Description Unit Quantity Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! (a) Detailed Soil Investigation

#REF! #REF! #REF! #REF! #REF! (b) All kinds of soil except fissured rock & hard rock

#REF! #REF! #REF! #REF! #REF! (e) River Crossing Location

#REF! #REF! #REF! #REF! #REF! (f)

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

Total Erection Price (A+B) #REF!

Place : Printed Name :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 4

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(SCHEDULE OF RATES AND PRICES )

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

Training Charges for Training to be imparted

SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Training Charges excluding GST Total Training Charges excluding GST Total GST as confirmed by Bidder

Revaluation of J column Tax Calculation

NOT APPLICABLE Revaluation of J column Tax Calculation

Included 0.00 0 0

Total Training Charges 0.00 0

Total GST as confirmed by Bidder 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 4b

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(SCHEDULE OF RATES AND PRICES )

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

Maintenance Charges during & after Defect Laibility Period

SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Maintenance Charges excluding GST Total Maintenance Charges excluding GST Total GST as confirmed by Bidder

0 Revaluation of P column Tax Calculation

A. #REF! Revaluation of P column Tax Calculation

1 Included 0.00 0 0

2 Included 0.00 0 0

3 Included 0.00 0 0

4 Included 0.00 0 0

B. #REF! Revaluation of P column Tax Calculation

1 Included 0.00 0 0

2 Included 0.00 0 0

3 Included 0.00 0 0

4 Included 0.00 0 0

Total Maintenance Charges during and after Defect Liabilty Period 0.00 0

Total GST as confirmed by Bidder 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 5

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(SUMMARY OF TAXES & DUTIES APPLICABLE ON PLANT & EQUIPMENT)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount

1 TOTAL GST ON GOODS Excise Duty #REF! Excise Duty #REF!

Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable. 0.00

2 TOTAL GST ON SERVICES Sales Tax 0.00 Sales Tax 0.00

Total GST on Installation Services (Schedule-3), Training to be imparted in India (Schedule-4) 0.00 #REF! 0 #REF! 0

GRAND TOTAL [1+2] 0.00 Grand Total after Discount #REF! Grand Total after MPD #REF!

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 5

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

SUMMARY OF TAXES & DUTIES APPLICABLE ON GOODS

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

Sl. No. Item Nos. Total Price (INR)

1 TOTAL GST ON GOODS 0.00

Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.

2 TOTAL GST ON SERVICES 0.00

Total GST on Installation Services (Schedule-3), Training to be imparted in India (Schedule-4a) and Maintenance Charges during and after Defect Liabilty Period (Schedule-4b)

GRAND TOTAL [1+2] 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 6

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

Sl. No. Description Total Price (INR)

1 TOTAL SCHEDULE NO. 1 0.00

Ex-works price of Plant and Equipment including Type Test Charges

2 TOTAL SCHEDULE NO. 2 0.00

Local Transportation, In-transit Insurance, loading & unloading

3 TOTAL SCHEDULE NO. 3 0.00

Installation Charges

4 TOTAL SCHEDULE NO. 4 0.00

Training Charges

4b TOTAL SCHEDULE NO. 4b 0.00

Maintenance Charges during & after Defect Laibility Period

5 TOTAL SCHEDULE NO. 5 0.00

Taxes and Duties

6 TOTAL SCHEDULE NO. 7 0.00

Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]

GRAND TOTAL [1+2+3+4+5] 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule - 6 After Discount

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002

Sl. No. Description Total Price (INR)

1 TOTAL SCHEDULE NO. 1 0.00

Ex-works price of Plant and Equipment including Type Test Charges

2 TOTAL SCHEDULE NO. 2 0.00

Local Transportation, In-transit Insurance, loading & unloading

3 TOTAL SCHEDULE NO. 3 0.00

Installation Charges

4 TOTAL SCHEDULE NO. 4 0.00

Training Charges

4b TOTAL SCHEDULE NO. 4b 0.00

Maintenance Charges during & after Defect Laibility Period

5 TOTAL SCHEDULE NO. 5 0.00

Taxes and Duties

6 TOTAL SCHEDULE NO. 7 0.00

Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]

GRAND TOTAL [1+2+3+4+5] 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Schedule 7

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!

As per lum-sum on Sch-7 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002 Multipackage Discount 0.0000%

Type tests on Earthwire, Hardwar Fittings & accessories of conductor & earthwire:

SL. NO. PR No Line Item No Code HSN Code Whether HSN in column ‘2’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total GST as confirmed by Bidder Revaluation of M column Tax Calculation Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)

1 Included 0.00 0 0.00

2 Included 0.00 0 0.00

TOTAL TYPE TEST CHARGES 0.00

Total GST as confirmed by Bidder 0.00

Date : -- Printed Name :

Place : Designation :

Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation 0 0

(SCHEDULE OF RATES AND PRICES ) 0 0

Bidder’s Name and Address (Sole Bidder) :

SL. NO. Description of Test #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) AS per Percent #REF!

As per lum-sum on Sch-7 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control

…….. …….. …….. …….. …….. …….. board Office, Sector 16A, Faridabad, Haryana 121002 Multipackage Discount 0.0000%

Type Tests on Earthwire

SL. NO. Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)

(a) #REF! #REF! #REF! #REF! #REF!

(b) #REF! #REF! #REF! #REF! #REF!

Sub-Total (I) #REF!

TOTAL TEST CHARGES (I) #REF!

Discount Sche-7 #REF! MPD Sche-7 #REF!

Dis Alert #REF!

Date : -- Printed Name :

Place : Designation :

Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation 0 0 0

(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) 0 0 0

Bidder’s Name and Address (Sole Bidder) : 0

SL. NO. Description of Test 0

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Letter of Discount

LETTER OF DISCOUNT

Contract Services

Power Grid Corporation of India Ltd.,

Rajasthan Projects Office, 4th Floor, REIL House,

Shipra Path, Mansarovar, Jaipur-302020 Rajasthan

Subject : Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

With reference to the subject tender, we hereby offer unconditional discount on the prices quoted by us as per details given here below : Eq Weightage of Rs/ % Final Discount Factor

1 Discount on lum-sum basis on total price quoted by us without Taxes & Duties. [The discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2, Sch-3, Sch-4a, Sch-4b & Sch-7] In Rs. 0.00 0.0000000000%

2 Discount on percent basis on total price quoted by us without Taxes & Duties. [The discount shall be applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2 , Sch-3, Sch-4a, Sch-4b & Sch-7] In Percent (%) 0.00 0.00%

3 Discount on lum-sum basis on the Schedules as given below : [The discount shall be proportionately applicable on all the relevent items of the respective Schdules.] In Rs.

Schedule-1 : Ex works prices In Rs. 0.00 0.0000000000% Schedule-1 : Ex-Works Price 0.0000000000%

Schedule-2 : Freight & Insurance In Rs. 0.00 0.0000000000% Schedule-2 : Freight & Insurance 0.0000000000%

Schedule-3 : Erection Charges In Rs. 0.00 0.0000000000% Schedule-3 : Erection Charges 0.0000000000%

Schedule-4a : Training Charges In Rs. 0.00 0.0000000000% Schedule-4a : Training Charges 0.0000000000%

Schedule-4b : Maintenance Charges during and after DLP In Rs. 0.00 0.0000000000% Schedule-4b : Maintenance Charges 0.0000000000%

Schedule-7 : Type Test Charges In Rs. 0.00 0.0000000000% Schedule-7 : Type Test Charges 0.0000000000%

4 Discount on percent basis on the Schedules as given below : [The discount shall be applicable on all the relevent items of the respective Schdules.] In Percent (%)

Schedule-1 : Ex works prices In Percent (%) 0.00 0.00%

Schedule-2 : Freight & Insurance In Percent (%) 0.00 0.00%

Schedule-3 : Erection Charges In Percent (%) 0.00 0.00%

Schedule-4a : Training Charges In Percent (%) 0.00 0.00%

Schedule-4b : Maintenance Charges during and after DLP In Percent (%) 0.00 0.00%

Schedule-7 : Type Test Charges In Percent (%) 0.00 0.00%

Discount(s) offered at sl. No. 1 to 4 will get displayed and accounted for automatically in the respective items of the Schedules.

5 We hereby offer Multi-package discount as given below:

Multi-Package Discount(s) offered at sl. No. 5 will not get automatically accounted for in the respective items of the Schedules. The same shall be worked out saparately for evaluation.

Please consider this letter of discount as the integral part of our price bid.

Thanking you, we remain,

Yours faithfully,

For and on behalf of …….. …….. …….. …….. …….. ……..

Date : -- Printed Name :

Place : Designation :

Details of Octroi

Sl No. Description of Items Amount on which Octroi is applicable Rate of Octroi Octroi

Details of Entry Tax

Sl No. Description of Items Amount on which Entry Tax is applicable Rate of Entry Tax Entry Tax

Details of Other Taxes & Duties

Sl No. Description of Items Amount on which Other Taxes & Duties are applicable Description of Taxes & Duties Rate of Taxes & Duties Amount of Taxes & Duties

Tender Enquiry No.:NR1/NT/W-CIVIL/DOM/I00/25/14315; (RFX- 5002004864) Bid Form 2nd Envelope Sole Bidder 1 st 1 January

0 2 nd 2 February

BID FORM (Second Envelope) 3 rd 3 March

Bid Proposal Ref. No. 5 th 5 May

Date : -- 6 th #VALUE! 6 June

7 th #VALUE! 7 July

To: 8 th #VALUE! 8 August

Contracts Services, 3rd Floor 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 th 10 October

SCO Bay 5-10, near Haryana Pollution Control 11 th 11 November

board Office, Sector 16A, Faridabad, Haryana 121002 12 th 12 December

Name of Contract : Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation 15 th

Dear Ladies and/or Gentlemen, 16 th

Schedule 1 Plant and Equipment (Including Mandatory Spare Parts) to be supplied, including Type Test Charges. 21 st

Schedule 2 Local Transportation, In-transit Insurance, loading and unloading 22 th

Schedule 3 Installation Charges. 23 th

Schedule 4 Training charges for training to be imparted. 24 th

Schedule 4b Maintenance Charges during & after Defect Laibility Period.

Schedule 5 Taxes and Duties not included in Schedule 1 25 th

Schedule 6 Grand Summary [Schedule 1to 5] 26 th

Schedule 7 Break-up of Type Test Charges for Type Tests to be conducted 27 th

2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 1

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of …….. …….. …….. …….. …….. ……..

Date : -- Printed Name :

Place : Designation :

In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him.

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

STATEMENT OF QUOTED / CORRECTED PRICES

All Figures are in Rupees

Sl. No. Price Component Quoted Price Corrected Price

1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00

2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00

3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00

4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable

5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00

6 DISCOUNT #REF! #REF! #REF!

7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!

8 TAXES & DUTIES PAYABLE ADDITIONALLY

A) EXCISE DUTY 0 0.00

B) CENTRAL SALES TAX 0 0.00

C) VAT #REF! 0.00

D) ENTRY TAX / OCTROI #REF! 0.00

F) TOTAL TAXES & DUTIES #REF! 0.00

8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! 0.00

9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00

I) Bidder has indicated the following taxes and duties additionally applicable for their bid:

Excise Duty % as Excise Duty

#REF! VAT #REF! #REF!

#REF! Entry Tax/ Octroi #REF! #REF!

Others as Others

II) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 2% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated :

a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0

b) Excise Duty, as applicable on (a) above at the rate : 10.00% Rs. 0

c) Amount on which Sales Tax is applicable 0.00 0

d) CST, as applicable on (a) + ED (b) above at the rate : 2.00% Rs. 0

e) VAT, as applicable on (a) + ED (b) above at the rate : 1.00% 0

g) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. 0

h) Entry Tax, as applicable on (e) above at the rate : Rs. 0.00

Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation Statement of Quoted / Corrected Prices Page

Spec. No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)

STATEMENT OF QUOTED / CORRECTED PRICES

All Figures are in Rupees

Sl. No. Price Component Quoted Price Corrected Price

1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00

2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00

3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00

4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable

5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00

6 DISCOUNT #REF! #REF!

7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!

8 TAXES & DUTIES PAYABLE ADDITIONALLY

A) EXCISE DUTY #REF! 0.00

B) CENTRAL SALES TAX /VAT #REF! #REF!

C) ENTRY TAX / OCTROI #REF! #REF!

D) OTHERS #REF! 0.00

E) TOTAL TAXES & DUTIES #REF! #REF!

8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! #REF!

9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00

I) Bidder has indicated the following taxes and duties additionally applicable for their bid:

a) Excise Duty Rs. #REF!

b) CST /VAT Rs. #REF!

c) Entry Tax / Octroi Rs. #REF!

d) Others Rs. #REF!

II) Bidder has offered following discount(s)

III) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 1% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated : Details of dicounts

a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0 Gross LS #REF! #REF! #REF! Gross % #REF! #REF! #REF!

b) Excise Duty @ 10.3% of (a) above Rs. 0 #REF! #REF!

c) CST / VAT @ 2% of Ex-Works of Direct Supplies (a) + ED (b) above Rs. #REF! Sch-1 Direct LS #REF! #REF! #REF! Sch-1 Direct % #REF! #REF! #REF!

d) Others Rs. Sch-1 BO LS #REF! #REF! #REF! Sch-1 BO % #REF! #REF! #REF!

e) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. #REF! Sch-2 LS #REF! #REF! #REF! Sch-2 % #REF! #REF! #REF!

f) Entry Tax @ 1% of (e) above Rs. #REF! Sch-3 LS #REF! #REF! #REF! Sch-3 % #REF! #REF! #REF!

Sch-7 LS #REF! #REF! #REF! Sch-7 % #REF! #REF! #REF!

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation Statement of Quoted / Corrected Prices Page Different Manner #REF!

Text for Discount #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Summary Sheet for Open Platform, RCC Road and Closed Store at Bikaner S/s PR value

Sr. No. Description Amount

1 03 Nos. open Platform #REF! #REF!

2 250 Rm RCC Road #REF! #REF!

3 01 No. Closed store with Septic tank

a) Civil works #REF! #REF!

b) Electrical work #REF! #REF!

Total for store work #REF!

Sub - Total(incl. GST) #REF!

Excluding GST #REF!

Sr. No. Description Amount

1 03 Nos. open Platform #REF!

2 250 Rm RCC Road #REF!

3 01 No. Closed store with Septic tank

a) Civil works #REF!

Total Including GST @ 18 % #REF!

Excl. GST Amount #REF!

BOQ of 03 Nos. open Platform (Dimension 25m x 20m each) at Biakner S/s

SR. NO. DSR 2023 ITEM NO. ITEM DESCRIPTION UNIT Qty Rate Estimated Amount(Rs.) Remarks.

1 0323 DSR rate calculation Providing and laying Polythylene Sheet 125 micron over PCC (1:4:8) for road work complete in all respects at all levels Sqm 1500.000 #REF! #REF!

2 1.1.2 CARRIAGE OF MATERIALS : By Mechanical Transport including loading,unloading and stacking Earth lead upto 1km Cum 189.643 #REF! #REF!

3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 189.643 #REF! #REF!

4 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Sqm 1777.593 #REF! #REF!

5 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Cum 284.961 #REF! #REF!

6 4.1.4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) Cum 150.000 #REF! #REF!

7 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) Cum 132.299 #REF! #REF!

8 5.9.1 Centering and shuttering including strutting, propping etc. and removalof form for : Foundations, footings, bases of columns, etc. for mass concrete Sqm 152.658 #REF! #REF!

9 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 94.150 #REF! #REF!

10 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. Sqm 1500.000 #REF! #REF!

11 16.3.1 Supplying and stacking at site. 90 mm to 45 mm size stone aggregate Cum 192.000 #REF! #REF!

12 16.3.2 63 mm to 45 mm size stone aggregate Cum 144.000 #REF! #REF!

13 16.3.6 Stone screening 13.2 mm nominal size (Type A) Cum 39.000 #REF! #REF!

14 16.3.10 Moorum Cum 48.000 #REF! #REF!

15 16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . Cum 300.000 #REF! #REF!

16 16.46.1 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavementsm all complete as per direction of the Engineer-in-Charge. 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. Per cm width per cm depth per m length 405.000 #REF! #REF!

BOQ of RCC Road ( 250 M )for access upto new proposed store at Bikaner S/s

SR. NO. DSR 2023 ITEM NO. ITEM DESCRIPTION UNIT Qty rate Estimated Amount(Rs.)

1 0323 DSR rate calculation Providing and laying Polythylene Sheet 125 micron over PCC (1:4:8) for road work complete in all respects at all levels Sqm 937.500 #REF! #REF!

2 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) Cum 108.750 #REF! #REF!

3 5.9.1 Centering and shuttering including strutting, propping etc. and removalof form for : Foundations, footings, bases of columns, etc. for mass concrete Sqm 100.000 #REF! #REF!

4 5.22.6/ 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 2544.198 #REF! #REF!

6 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. Sqm 1087.500 #REF! #REF!

7 16.3.1 Supplying and stacking at site. 90 mm to 45 mm size stone aggregate Cum 139.200 #REF! #REF!

8 16.3.2 63 mm to 45 mm size stone aggregate Cum 99.600 #REF! #REF!

9 16.3.3 53 mm to 22.4 mm size stone aggregate Cum 92.331 #REF! #REF!

10 16.3.6 Stone screening 13.2 mm nominal size (Type A) Cum 72.038 #REF! #REF!

11 16.3.10 Moorum Cum 28.013 #REF! #REF!

12 16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . Cum 311.250 #REF! #REF!

13 16.46.1 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavementsm all complete as per direction of the Engineer-in-Charge. 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. Per cm width per cm depth per m length 120.000 #REF! #REF!

14 16.75 (modified) Providing and laying C.C. pavement with reinforced cement concrete, excluding the cost of centering, shuttering and reinforcement - All work up to plinth level. The concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 93.750 #REF! #REF!

BOQ of Closed Store at Bikaner S/s

Sl. No. DSR 2023 ITEM NO. Item Description Units Quantity Rate Amount in Rs.

Annexure - 2A Civil

1 1.1.2 Carriage of materials by mechanical transport including loading, unloading and stacking, lead up to 1KM: Earth cum 100.00 #REF! #REF!

2 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed: All kinds of soil cum 575.00 #REF! #REF!

3 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.: All kind of soil cum 336.00 #REF! #REF!

4 2.10.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil : Pipes, cables etc. not exceeding 80 mm dia. mtr 200.00 #REF! #REF!

5 2.10.1.2 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: All kind of soil: Pipes, cables etc. exceeding 80mm dia. but not exceeding 300mm dia. mtr 120.00 #REF! #REF!

6 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m. cum 911.00 #REF! #REF!

7 2.27 Supplying and filling in plinth with Jamuna/fine sand under floors including watering, ramming consolidating and dressing complete. cum 36.00 #REF! #REF!

8 2.28.1 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m: All kind of soil. sqm 294.00 #REF! #REF!

9 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos emulsifiable concentrate of 20 percent ltr. 147.00 #REF! #REF!

10 2.35.2.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration mtr 70.00 #REF! #REF!

11 2.35.3.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1: 2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 251.00 #REF! #REF!

12 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). cum 2.00 #REF! #REF!

13 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size). cum 60.00 #REF! #REF!

14 4.3.1 Centring and shuttering including strutting, propping etc and removal of formwork for: Foundations, footings, bases of columns sqm 65.00 #REF! #REF!

15 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size). sqm 38.00 #REF! #REF!

16 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. sqm 56.00 #REF! #REF!

17 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. sqm 110.00 #REF! #REF!

18 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access sqm 350.00 #REF! #REF!

19 5.9.4 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cast in Situ) sqm 40.00 #REF! #REF!

20 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beam, plinth beams, girders, bressumers and cantilevers. sqm 120.00 #REF! #REF!

21 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts. sqm 120.00 #REF! #REF!

22 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc including edges. sqm 60.00 #REF! #REF!

23 5.11.1 Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured): Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm 485.00 #REF! #REF!

24 5.22.6/5.22A.6 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete( for upto plinth/above plinth) : Thermo- Mechanically Treated bars. kg 15510.00 #REF! #REF!

25 5.30 Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. mtr 74.00 #REF! #REF!

26 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum cum 51.00 #REF! #REF!

27 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete:Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level, Concrete of M25 grade with minimum cement content of 330 kg /cum cum 90.00 #REF! #REF!

28 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. Quintal 100.00 #REF! #REF!

29 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) cum 79.00 #REF! #REF!

30 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) cum 80.00 #REF! #REF!

31 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 29.00 #REF! #REF!

32 9.96.1 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 300 x 16mm each 3.00 #REF! #REF!

33 9.96.2 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 250 x 16mm each 3.00 #REF! #REF!

34 9.97.2 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 250 x 10mm each 10.00 #REF! #REF!

35 9.97.4 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete : 150x10 MM each 10.00 #REF! #REF!

36 9.100.1 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size: 125mm each 6.00 #REF! #REF!

37 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper each 4.00 #REF! #REF!

38 9.102 Providing & fixing aluminium casement stays ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete each 6.00 #REF! #REF!

39 10.2 Structural Steel work riveted, bolted or welded in built up sections, trusses & framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete kg 3000.00 #REF! #REF!

40 10.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No. 2 and M.S. top cover of required thickness for rolling shutters: 80 x 1.25mm M.S. laths with 1.25mm thick top cover sqm 16.00 #REF! #REF!

41 10.7 Providing and fixing ball bearing for rolling shutters. each 2.00 #REF! #REF!

42 10.8.2 Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area sqm 2.00 #REF! #REF!

43 10.17 Providing and fixing MS fan clamp type I of 16mm dia MS bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete each 6.00 #REF! #REF!

44 10.25.2 Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. kg 200.00 #REF! #REF!

45 11.4 52mm thick cement concrete flooring with "Hardcrete" concrete hardener topping under layer 40mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick Hardcrete concrete hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6mm nominal size) by volume with which Hardcrete hardening compound of Snowcem India Ltd. or equivalent is mixed @ 2 litre Hardcrete per 50kg of cement including cement slurry, but excluding the cost of nosing of steps etc. complete. sqm 230.00 #REF! #REF!

46 11.6.1 Cement plaster skirting (up to 30cm height) with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement: 18mm thick sqm 60.00 #REF! #REF!

47 11.8 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. sqm 240.00 #REF! #REF!

48 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 5.00 #REF! #REF!

49 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, Size of Tile 600x600 mm sqm 10.00 #REF! #REF!

50 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4(1 cement : 2 coarse sand : 4 stone aggregate 10mm anddown) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75mm deep chase. mtr 106.40 #REF! #REF!

51 12.22 Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over PVC sheet 1m x 1m x 400 micron finished with 12mm cement plaster 1:3 (1 cement : 3 corase sand) and a coat of neat cement rounding the edges and making and finishing outlet complete. each 6.00 #REF! #REF!

52 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes :110 mm diameter mtr 50.00 #REF! #REF!

53 12.42.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion : Single tee with door 110x110x110 mm each 12.00 #REF! #REF!

54 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion: 110mm bend each 10.00 #REF! #REF!

55 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion: 110mm shoe each 10.00 #REF! #REF!

56 12.43.2 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brickwork & fixing in cement mortar 1:4 ( 1 cement 4 coarse sand ) and making good the wall etc. complete. : 110mm each 30.00 #REF! #REF!

57 13.1.2 12mm cement plaster of mix: 1:6 (1 cement: 6 fine sand) sqm 440.00 #REF! #REF!

58 13.2.2 15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) sqm 440.00 #REF! #REF!

59 13.16.1 6mm cement plaster to ceiling of mix: 1:3 (1 cement: 3 find sand) sqm 210.00 #REF! #REF!

60 13.41.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including priming coat with cement primer. sqm 350.00 #REF! #REF!

61 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm) sqm 350.00 #REF! #REF!

62 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm 65.00 #REF! #REF!

63 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type WC pan) with seat & lid,10 litre low level white PVC flushing cistern with manually controlled device (handle liver) confirming to IS 7231, with all fitting and fixture complete including cuttings and making good the walls and floor wherever required: each 1.00 #REF! #REF!

64 17.7.3 Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, Kingston/ Gem/ Techno/ Parko, 32mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required: White Vitreous China: Flat back wash basin size 550x400mm with a single 15mm C.P. brass pillar tap. each 1.00 #REF! #REF!

65 17.28.1.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: Semi rigid pipe: 32mm dia each 1.00 #REF! #REF!

66 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. each 1.00 #REF! #REF!

67 17.32.2 Providing and fixing mirror of superior quality thickness of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm each 1.00 #REF! #REF!

68 17.34.1 Providing and fixing toilet paper holder: C.P. brass each 1.00 #REF! #REF!

69 17.35.1.1 Providing and fixing soil, waste and vent pipes: 100mm dia: Sand cast iron S&S pipe as per IS: 1729 mtr 12.00 #REF! #REF!

70 17.35.2.1 Providing and fixing soil, waste and vent pipes: 75mm dia: Sand cast iron S&S pipe as per IS: 1729 mtr 10.00 #REF! #REF!

71 17.36.1 Providing and filling the joints with spun yard cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I. / C.I. pipes: 75mm dia pipe each 10.00 #REF! #REF!

72 17.36.2 Providing and filling the joints with spun yard cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I. / C.I. pipes: 100mm dia pipe each 6.00 #REF! #REF!

73 17.39.2.2 Providing and fixing plain bend of required degree: 75mm dia: Centrifugally cast (spun) iron S&S pipe each 6.00 #REF! #REF!

74 17.56.1.2 Providing and fixing terminal guard: 100mm: Sand cast iron S and S as per IS-3989 each 1.00 #REF! #REF!

75 17.57.2.2 Providing and fixing collar: 75mm: Centrifugally cast (spun) iron S&S pipe each 4.00 #REF! #REF!

76 17.59.2 Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter: 75mm each 4.00 #REF! #REF!

77 17.60.2.1 Providing and fixing cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 75mm outlet: Sand Cast Iron S and S.as per IS-3989 each 1.00 #REF! #REF!

78 18.10.3 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) exposed on wall 25mm dia. nominal bore. mtr 20.00 #REF! #REF!

79 18.11.1 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work): Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 15mm dia. nominal bore. mtr 8.00 #REF! #REF!

80 18.12.3 Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. (external work): 25mm dia. nominal bore mtr 15.00 #REF! #REF!

81 18.13.1 Making connection of G.I. distribution branch with G.I. main of sizes by providing and fixing tee including cutting and threading the pipe etc. complete: 25 to 40mm dia. nominal bore each 2.00 #REF! #REF!

82 18.15.1 Providing and fixing brass bib cock of approved quality: 15mm nominal bore each 1.00 #REF! #REF!

83 18.16.2 Providing and fixing brass stop cock of approved quality.: 20 mm nominal bore each 3.00 #REF! #REF!

84 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25mm nominal bore each 1.00 #REF! #REF!

85 18.18.3 Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats: 25mm nominal bore each 1.00 #REF! #REF!

86 18.21.2.1 Providing and fixing unplasticised PVC connection pipe with brass unions. 45cm length. 15mm nominal bore each 2.00 #REF! #REF!

87 18.32.1 Constructing masonry chamber 30x30x50cm inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4coarse sand) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. each 1.00 #REF! #REF!

88 18.38.2 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 20mm dia. Pipe mtr 10.00 #REF! #REF!

89 18.38.3 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work: 25mm dia. Pipe mtr 10.00 #REF! #REF!

90 18.41.3 Providing and filling sand of grading zone V or coarser grade alround the GI pipe in Extenal work - 25 mm diameter pipe mtr 5.00 #REF! #REF!

91 18.46.1 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 15mm nominal bore each 1.00 #REF! #REF!

92 18.46.2 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 20 mm nominal bore each 5.00 #REF! #REF!

93 18.46.3 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 25mm nominal bore each 5.00 #REF! #REF!

94 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per ltr. 500.00 #REF! #REF!

95 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approve make conforming to IS:8931: 15mm nominal bore each 3.00 #REF! #REF!

96 19.1.2 Providing laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete: 150mm dia. mtr 20.00 #REF! #REF!

97 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) alround S.W. pipes including bed concrete as per standard design: 150mm dia S.W. pipe mtr 5.00 #REF! #REF!

98 19.4.1.1 Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design: 100x100mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 5.00 #REF! #REF!

99 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slabs with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) finished with a floating coat of neat cement as per standard design: Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1.00 #REF! #REF!

100 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1.00 #REF! #REF!

101 21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 505.00 #REF! #REF!

102 21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge.(Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 150.00 #REF! #REF!

103 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 30.00 #REF! #REF!

104 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in-charge complete: Upto 5mm depth and 5 mm width mtr 85.00 #REF! #REF!

105 21.11.1 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc to the side hung windows as per direction of Engineer- in-charge complete. 205 X 19 mm each 50.00 #REF! #REF!

106 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1: 5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1: 5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slopeand treating similarly the adjoining walls upto 300mm height including rounding of junctions adjoining walls upto 300mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20mm thick jointless cement mortar of mix 1: 4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge: With average thickness of 120mm and minimum thickness at khurra as 65mm. sqm 296.96 #REF! #REF!

Schedule 2B Electrical work Rate as per DSR 2022

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.1 5/6 A switch Nos 3

1.24.4 3 pin 5/6 A socket outlet Nos 3

1.27 Supplying and fixing following size/module, GI box,along with modular base & cover plate for modular switches in recess etc. as required.

2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.4.1 4 way (4 + 12), Double door EACH 1

2.10.2 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and neutral EACH 6

2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.d.63 A EACH 1

1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

(1.17.1) 1*1.5 sq.mm Meter 75

(1.17.20) 2*4 sq.mm Meter 50

1.20.1 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20mm Meter 75

1.3.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group A POINT 8

1.5 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. GROUP A METER 40

1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

1.7.3 2 X4sq. mm + 1 X 4sq. mm earth wire METER 30

5.4 EARTHING WITH G.I EARTH PLATE 600X600X6MM THICK , INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSURE WITH COVER PLATE HAVING LOCKING ARRANGEMENT AND WATERING PIPE OF 2.7m long ETC WITH CHARCOAL /COKE AND SALT AS REQUIRED. EACH 1

5.9 Supplying and laying 25mm X 5mm G.I strip at 0.50m below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required (jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) EACH 20

1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. EACH 4

1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. EACH 6

1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. EACH 4

1.32 Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. EACH 3

Total DSR item (including 18% GST)

Add escalation@ 5.66% as per latest price index

Sub Total 1 ( DSR ITEM) Rs. 9048682.00

Havells Fan Latest available price supply of ceiling fan 1400mm (Havells make Pearl White Silver FHCSS1SPWS56 or euivalents) as per technical specification and as per direction of Engineer-In-charge EACH 4 Rate Revised

Bajaj Illumination price list Supply of LED Luminary type (Bajaj High Bay ) catalogue reference-BIHNK 100W WH NB TG SD-100W or equivalent as per technical specification and as per direction of Engineer-In-charge NOS 6 Rate Revised

SOR'March 2025(1000031976) Supply, laying and installation of 4CX16sqmm PVC insulated cable armoured from nearby source of Power as per GTP and as per direction of Engineer -In-Charge KM 0.5 Rate Revised

MEASUREMENT SHEET

ITEM NO. DESCRIPTION Unit NO. LENGTH (M) BREADTH(M) DEPTH (M) QUANTITY( CUM)

1 Carriage of Material Cum

2 2.6.1 Excavation in all kind of soil , F1 foundation Cum 4 4.4 4.1 1.6 115.46

F2 foundation 6 5.1 4.9 1.6 239.90

F3 foundation 4 4.5 4.3 1.6 123.84

F4 foundation 2 2.9 2.9 1.6 26.91

3 2.8.1 Excavation in all kind of soil , for office room and Toilet Foundation Cum 1 11.23 2.11 1.05 24.88

for lighting pole 30 1.35 1.35 1 54.68

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth Sqm 1 911.00

5 2.27 Sand filling Cum 1 24 10 0.15 36

6 2.28.1 Surface Dressing, for closed store Sqm 1 25.5 11.5 293.25

7 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos emulsifiable concentrate of 20 percent, for Linear length Ltr. 155.7 7.785 7.785

For 300 mm apart whole area 2781 139.05 139.05

8 2.35.2.1 chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment Metre 1 69.2 69.2

9 2.35.3 chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment Sqm 1 24.3 10.3 250.29

10 4.1.3 PCC 1:2:4, floor finishing Cum

INVERT LEVEL OF DRAIN FINISHING 1 150 0.45 0.025 1.6875

11 4.1.8 PCC 1:4:8, F1 foundation for closed store Cum 4 2.3 2 0.1 1.8

F2 foundation 6 2.8 2.6 0.1 4.4

F3 foundation 4 3 2.8 0.1 3.4

F4 foundation 2 1.4 1.4 0.1 0.4

Septic Tank 1 5.66 2.26 0.1 1.3

for lighting pole 30 0.95 0.95 0.1 2.7

for office room and Toilet Foundation 1 11.23 1.205 0.1 1.4

Floor slab in Closed store 1 24 10 0.1 24.0

12 4.3.1 Centring and shuttering including strutting, propping etc and removal of formwork for: Foundations, footings, bases of columns Sqm

F1 Foundation 4 8.6 0.1 3.44

F2 foundation 6 10.8 0.1 6.48

F3 foundation 4 11.6 0.1 4.64

F4 foundation 2 5.6 0.1 1.12

Septic Tank 1 15.84 0.1 1.584

for lighting pole 30 3 0.1 9

Drain Sec B-B 2 150 0.075 22.5

for office room and Toilet Foundation 2 11.23 0.1 2.246

Floor slab in Closed store 1 68 0.1 6.8

Parapet Wall 2 25.5 0.23 11.73

14 4.17 Plinth Protection Sqm 1 74 0.75 55.5

15 5.9.1 Shuttering for raft, F1 foundation Sqm 4 7.8 0.175 5.46

Septic Tank 1 15.04 0.15 2.256

Lighting Pole 30 3 0.75 67.5

16 5.9.3 Shuttering for roof Sqm 1 25.8 11.8 304.44

roof for office and toilet 1 5.23 4 20.92

for Septic tank cover 1 5.46 2.06 11.2476

Partition Wall in Septic Tank 2 1.6 1.3 4.16

17 5.9.5 Shuttering for PB and LB Sqm

LB1 Main door 1 4.3 0.9 3.87

LB2 Office entrance 2 1.3 0.45 1.17

LB3 Washroom 1 1.05 0.45 0.4725

Roof Beam B1 2 10.3 1.05 21.63

roof Beam B2 2 24.3 1.05 51.03

18 5.9.6 Shuttering For Column Sqm

5.11.1 Extra for additional height Sqm

20 5.33.1 RCC M-25 Upto Plinth Beam Cum

Septic Tank raft 1 6.36 2.96 0.15 2.82384

Septic tank partition wall 1 1.3 1.6 0.15 0.312

21 5.33.2 M-25 RCC Above PB

LB2 Office entrance 2 1.3 0.25 0.3 0.195

roof slab of office and toilet 1 5.23 4 0.125 2.615

22 5.35 Add Extra Cement Quintal 1 0.7 141 98.7

23 6.1.2 Brickwork upto Plinth Cum

Foundation for office and toilet 1 11.3 0.23 0.3 0.7797

for septic tank 2 5.92 0.46 0.65 3.54016

Total 78.673025

24 6.4.2 Brickwork above plinth upto floor Cum

Wall for store 2 24 0.23 5 55.2

wall for office and bathroom 1 11.3 0.23 2.5 6.4975

Parapet wall 2 25.6 0.23 0.45 5.2992

Deduct for Door opening -1 3.4 4 0.23 -3.128

for office and toilet entrance -3 1 0.23 2.55 -1.7595 -0.69 75 -51.75

25 6.4.2 Half Brick work SQm 1 11.5 2.5 28.75

MEASUREMENT SHEET

ITEM NO. DESCRIPTION Unit NO. LENGTH (M) BREADTH(M) DEPTH (M) QUANTITY( CUM)

0323 Plastic Sheet Sqm 3 25 20 1500.000

1.1.2 Carriage of Material Cum 189.643

2.25 Filling Cum 189.643

2.31 Clearing of Jungle Sqm 3 26.97 21.97 1777.593

2.8.1 Excavation in Soil. CUM 3 94.28 1.3 0.775 284.961

4.1.8 PCC 1:4:8, For Foundation Cum 3 94.28 0.7 0.1 19.799

4.1.4 PCC 1:2:4, for platform Cum 3 25 20 0.1 150.000

5.9.1 Shuttering, for Foundation of Platform Sqm 12 25.67 0.1 30.804

for Slab PCC of Platform 3 90 0.075 20.250

for Slab RCC of Platform (25*20/8*8) 24 32 0.1 76.800

6.1.2 Brick work Upto Plinth level, for 1st layer of Long Wall Cum 6 25.345 0.46 0.375 26.232

for 1st layer of Short Wall 6 20.345 0.46 0.375 21.057

for 2nd layer of Long Wall 6 25.23 0.345 0.3 15.668

for 2nd layer of ShortWall 6 20.23 0.345 0.3 12.563

for 3rd layer of Long Wall 6 25 0.23 0.3 10.350

for 3rd layer of Short Wall 6 20 0.23 0.3 8.280

13.1.2 Plaster 12 mm, for long wall Sqm 6 25 0.475 71.250

for Short Wall 6 20 0.475 57.000

16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity for Base of Platform Sqm 3 25 20 1500.000

16.3.6 Stone screening for 1st layer Cum 0.27 25 20 0.1 13.500

Stone Screening for 2nd layer 0.51 25 20 0.1 25.500

16.3.10 Moorum for 1st layer Cum 0.6 25 20 0.1 30.000

Moorum for 2nd layer 0.36 25 20 0.1 18.000

16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity , for 1st Layer WBM Cum 3 25 20 0.1 150.000

for 2nd Layer WBM 3 25 20 0.1 150.000

16.46.1 Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound. For Longitudinal section ( 25/8, 3 grid) per cm depth per cm width per metre length 9 25 225.000

For Transverse Section 9 20 180.000

MEASUREMENT SHEET FOR RCC ROAD

ITEM NO. DESCRIPTION Unit NO. LENGTH (M) BREADTH(M) DEPTH (M) QUANTITY( CUM)

0323 Plastic Sheet Sqm 1 250 3.75 937.500

4.1.8 PCC 1:4:8, For Foundation Cum 1 250 3.75 0.1 93.750

For Shoulder of Road one side 1 250 0.6 0.1 15.000

5.9.1 Shuttering, for PCC Sqm 2 250 0.1 50.000

5.22.6 Reinforcement Steel, fe 500 D or more, Transverse Kg 32 3.65 27 0.3950617284 1245.867

16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity for base Sqm 1 250 4.35 1087.500

16.3.3 53 mm to 22.4 mm size stone aggregate Cum 0.935 250 3.95 0.1 92.331

16.3.6 Stone screening for 1st layer Cum 0.285 250 4.35 0.1 30.994

Stone Screening for 2nd layer 0.21 250 4.15 0.1 21.788

Stone Screening for 3rd layer 0.195 250 3.95 0.1 19.256

16.3.10 Moorum for 1st layer Cum 0.09 250 4.35 0.1 9.788

Moorum for 2nd layer 0.09 250 4.15 0.1 9.338

Moorum for 3rd layer 0.09 250 3.95 0.1 8.888

16.4 Laying, spreading and compacting stone aggregate of specified sizesto WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity, for 1st layer Cum 1 250 4.35 0.1 108.750

16.46.1 Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound. For for RCC Slab 32 grid per cm depth per cm width per metre length 32 3.75 120.000

16.75 Providing and laying C.C. pavement with reinforced cement concrete, excluding the cost of centering, shuttering and reinforcement - All work up to plinth level Cum 1 250 3.75 0.1 93.750

Sl No Code No Description Unit Qty Rate Amount

1 16.75 (Modified) Providing and laying C.C. pavement with reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. The concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) Cum 1 9045.75 9045.75 A

9999 Operational charges for vacuum dewatering system i/c screed vibration , placing of filter mat , top mat, vacuum process, floating , troweling, Brooming etc. LS 57.2 2.27 129.844

9999 T& P charges i/c consumable power charges, loading , unloading and hire charges of equipments LS 41.6 2.27 94.432

Total 9270.026 W

Add 1 % Water charges on "W-A" 2.09

Total 9272.116 X

Add GST on "X-A" (multiplying factor 0.2127) 48.18

Total 9320.296 Z

Add 15% CPOH on "Y-A" 41.2

Add Cess @ 1% on "Z-A" 3.16

Cost for 1 cum 9364.656

2 Supplying and laying plastic sheeting 125 micron thick

0323 Separation Membrane of impermeable plastic sheeting 125 micron thick Sqm 1 15 15

Add F&I 1% 0.15

Add labour charge @ 15 % of material cost 2.25

Add 1 % Water charges on W 0.17

Add GST on "X" (multiplying factor 0.2127) 3.74

Add 15% CPOH on "Y-A" 3.20

Add Cess @ 1% on "Z-A" 0.25

Cost for 1 Sqm 24.75

Name of Package : Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Specification No. : NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864)

Completion Period 12 Months

: Attachments : General guidelines for filling up the Attachments Construction of Residential Complex: - :

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Specification No.: NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864)

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(JV), 3(QR), Attach QR, 4, 4(A), 4(B), 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as perproforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. Not included here.

6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.

7 Attachment 18 Safety Pact : To be submitted as per ITB Clause No. 9.3(r) and as per remarks in the Attach 18.

8 Attachment 20: Declaration of Key Managerial Person jointly with Power of Attorney holder

9 Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, if applicable

10 Attachment 22: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable

11 Attachment 23: Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Sole Bidder 1

Yes JV (Joint Venture) 2 or More

Enter following details of the bidder No

Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 2 0

Address of Bidder

Whether the bidder is an MSE (Micro & Small Enterprise) Yes Yes 2 2 0

Enter the Name of Registration Authority

Whether the bidder meets Minimum Local Content in line with PPP-MII order, 2017 0 2 2 0

e-mail ID of Bid Signatory

Mobile No. of Bid Signatory

Tel No. of Bid Signatory

Fax No. of Bid Signatory MSE Yes

Name of other Partner Ram Lal

Address of other Partner G5

Name of other Partner - 2 (more, if any)

Address of other Partner - 2 (more, if any)

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-3(JV) Sole Bidder

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address To:

Contract & Materials & Ram Lal

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

0 Faridabad-121002

This Attachment is Not Applicable

Name(s) and Addresse(s) of other partner(s)

The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith Sole Bidder

Date : -- Printed Name : 0

Place : Designation : 12

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-3(QR)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Qualifying Requirement Data)

Bidder’s Name and Address (Lead Partner of) : To:

Contract & Materials

Name: 0 Power Grid Corporation of India Ltd.,

Address: 0 Northern Region –I, Regional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

Faridabad-121002

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).

* We have submitted bid as individual firm.

* We have submitted bid as joint venture of following firms :

(ii) #REF! 2 or more

(* Strike-off whichever is not applicable)

[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status;

b) The principal place of business;

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

b) Joint Venture Agreement.

GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].

S No. Particulars Name of the Bidder

1 Name of the Firm 0

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Date of Commercial production

9 Nationality of

10 Whether the bidder is an MSE (Micro & Small Enterprise). If Yes, attach Documentary Evidence with the Bid.

11 Whether the Bidder is a Start-Ups Company (as defined by DIPP). If Yes, attach Documentary evidence with the Bid.

1.0 TECHNICAL REQUIREMENTS {Reference para 1.0 of Annexure-A (BDS)}

1.1 1.0 Technical Experience: Bidder should have successfully# completed any type of civil works except furnishing/renovation of building during the last seven (7) years as on the originally scheduled date of bid submission as per following: (i) Under one contract of value of not less than Rs. 118.79 Lakh (excl. GST) OR (ii) Under two contracts each of value not less than Rs. 74.25 Lakh (excl. GST) OR (iii) Under three contracts each of value of not less than Rs. 59.4 Lakh (excl. GST)

1.2 Route-2: The bidder(s) who have established production line and testing facilities in India for 715kV or above class Reactor based on Technological Support of the Collaborator(s) for the equipment(s) can also be considered qualified provided, The bidder must have manufactured in India, type tested 715kV or higher voltage class either One (1) no. 1-phase Reactor of at least 80 MVAR capacity or One (1) no. 1-phase Transformer of at least 166 MVA capacity and the same should have been supplied as on the date of bid opening as mentioned above based on Technological Support of Collaborator(s) provided that:- (a) Collaborator(s) meets the Technical Experience criteria stipulated in Route-1. (b) A legally enforceable undertaking jointly by Bidder and the Collaborator(s) (as per enclosed format in Section-VI of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for five(5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the Collaborator(s) along with the bid stating that Collaborator(s) shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder.

1.3 Route-3: In case, the bidder is an Indian Entity established as Subsidiary/JVC/Group company by its parent/principal, who have established production line and testing facilities in India for 715kV or above class Reactor based on Technological Support of the parent/principal for the equipment(s) can also be considered qualified provided, The bidder must have manufactured in India, type tested 715kV or higher voltage class either One (1) no. 1-phase Reactor of at least 80 MVAR capacity or One (1) no. 1-phase Transformer of at least 166 MVA capacity and the same should have been supplied as on the date of bid opening as mentioned above based on Technological Support of Parent/ Principal company provided that:- (a) Parent/ Principal company meets the Technical Experience criteria stipulated in Route-1. (b) A legally enforceable undertaking jointly by Bidder and the Parent/ Principal company (as per enclosed format in Section-VI of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for five(5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the Parent/ Principal company along with the bid stating that Parent/ Principal company shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder.

In case bidder is a holding company, the technical experience referred to in para 1.1 above shall be of that holding company only (i.e. excluding its subsidiary/group companies). In case bidder is a subsidiary of a holding company, the technical experience referred to in para 1.1 above shall be of that subsidiary company only (i.e. excluding its holding company).

Using the following formats, each Bidder is requested to list the experience as detailed above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each experience of the Bidder

(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).

Format-A: (ROUTE-1)

Format for the Bidder/ Collaborator/ Parent/Principal Company of the bidder who must have designed, manufactured, tested & supplied 715kV or Higher Voltage class Reactor in support of meeting the Technical experience requirement of 1.1 of Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Bidder’s Name : 0 0

Single Firm : 0

1 Name of Contract Undertaken 0

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm

4(a)(i) Voltage Level of Reactors supplied under the Contract (Indicate 715kV or above class only)

No. of Reactor(s) under the contract

(Indicate nos. of 1 phase Reactors with rating not less than 110 MVAR OR no. of Reactors in Banks of 3 single phase units of at least 36.7 MVAR each)

MVAR capacity of the above mentioned three phase/single phase units

Name of the substation or switchyard

(a)(ii) No. of years, the above Reactor(s) are in operation as on the date of bid opening.

Type of cooling in the above Reactor

Scope of work involved under the Contract executed by Bidder

(Tick whichever is/are applicable)

of Reactors of Reactors

of Reactors of Reactors

Details of documents uploaded in support of the above stated experience

4(b)(i) Voltage Level of Transformers supplied under the Contract (Indicate 715kV or above class only)

No. of Transformer(s) under the contract

(Indicate nos. of 1 phase Transformer with rating not less than 500 MVA OR no. of Transformer in Banks of 3 single phase units of at least 166 MVA each)

MVA capacity of the above mentioned three phase/single phase units

Name of the substation or switchyard

Type of cooling in the above Transformer

Scope of work involved under the Contract executed by Bidder

(Tick whichever is/are applicable)

of Transformers of Transformers

of Transformers of Transformers

Details of documents uploaded in support of the above stated experience

4(b)(ii) Voltage Level of Reactors supplied under the Contract (Indicate 345kV or above class only)

No. of Reactor(s) under the contract

(Indicate nos. of 3 phase Reactors with rating not less than 50 MVAR OR no. of Reactor(s) in Banks of 3 single phase units of at least 16.7 MVAR each)

MVAR capacity of the above mentioned three phase/single phase units

Name of the substation or switchyard

Type of cooling in the above Reactor

Scope of work involved under the Contract executed by Bidder

(Tick whichever is/are applicable)

of Reactors of Reactors

of Reactors of Reactors

Details of documents uploaded in support of the above stated experience

4(b)(iii) No. of years, the above transformer(s) and reactor(s) indicated at 4(b)(i) & 4(b)(ii) respctively, are in operation as on the date of bid opening.

Details of documents uploaded in support of the above stated experience

Format-B: (ROUTE-2)

Format for Bidder(s) [who have established production line and testing facilities in India for 715kV or above class Reactor based on Technology Support of Collaborator(s)], in support of meeting the requirement of 1.2 (Route-2), Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents

Name of the Reactor Manufacturer 0 0

1 Name of Contract Undertaken 0

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm

4 Voltage Level of Reactors manufactured under the Contract (Indicate 715kV or above class only)

No. of Reactor(s) under the contract

(Indicate nos. of 1 phase Reactors with rating not less than 80 MVAR)

MVAR capacity of the above mentioned three phase/single phase units

Name of the substation or switchyard

whether the above Reactors are in operation as on the date of bid opening.(Yes/No)

No. of years, the above Reactors are in operation as on the date of bid opening.

Scope of work involved under the Contract

(Tick whichever is/are applicable)

Voltage Level of Transformer supplied under the Contract

No. of Transformer(s) under the contract

(Indicate nos. of 1 phase Transformer with rating not less than 166 MVA)

MVA capacity of the above mentioned three phase/single phase units

Name of the substation or switchyard

Whether the above Transformer are in operation as on the date of bid opening.

No. of years, the above Transformer are in operation as on the date of bid opening.

Scope of work involved under the Contract

(Tick whichever is/are applicable)

Details of documents uploaded in support of the above stated experience

Format-C: (ROUTE-3)

Format for Bidder (Indian entity) established as Subsidiary/ JVC/ Group Company by its Parent/ Principal, who have established production line and testing facilities in India for 715kV or above class Reactor, in support of meeting the requirement of 1.3 (Route-3), Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Bidder 0

Name of the Parent Company/Collaborator/Subsidiary for the 765kV Reactor {The qualifying data for the parent company or collaborator for the equipment is furnished in Format-A above) 0

1 Name of Contract Undertaken

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the Bidder

4 Voltage Level of Reactor supplied under the Contract (Indicate 715kV or above class only)

No. of Reactor(s) under the contract

(Indicate nos. of 1 phase Reactor with rating not less than 80 MVAR)

MVAR capacity of the above mentioned three phase/single phase units

Name of the substation or switchyard

Date as on which the above mentioned Reactors are supplied based on technological support of parent company / collaborator(s) / subsidiary.

Type of cooling in the above Reactor

Scope of work involved under the Contract executed by bidder

(Tick whichever is/are applicable)

Voltage Level of Transformer supplied under the Contract

No. of Transformer(s) under the contract

(Indicate nos. of 1 phase Transformer with rating not less than 166 MVA)

Name of the substation or switchyard

(b)(ii) Whether the above Transformer are in operation as on the date of bid opening.

No. of years, the above Transformer are in operation as on the date of bid opening.

Scope of work involved under the Contract

(Tick whichever is/are applicable)

5 Whether Parent/Principal company(s) meets the technical experience criteria stipulated at 2.1.1 above, and the details of which is mentioned at Format-A above. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-3 of Annexure-A(BDS))

6 Whether legally enforceable undertaking jointly by Bidder and the Parent/Pricipal company(s) (as per enclosed format in Section-VI: Sample Forms and Procedures of bidding document) is furnished along with the bid. (Applicable for the Bidder/Manufacturer(s) wish/proposes to qualify through Route-3 of Annexure-A(BDS))

7 Confirmation letter from the Parent/Principal Company along with the bid stating that Parent/Principal Company shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s) to be manufactured and supplied from the works in India. (Applicable for the Bidder wish/proposes to qualify through Route-3 of Annexure-A(BDS))

8 Details of documents uploaded in support of the above stated experience Annex-XXX Annex-YYY Annex-ZZZ

2.0 FINANCIAL REQUIREMENTS :

Financial Position {Reference para 1.2 of Annexure-A (BDS)} For the purpose of this particular bid, bidders shall meet the following minimum criteria:

(a)Minimum Average Annual Turnover @ (MAAT) for best 3 financial years out of last 5 financial years of the bidder should not be less than INR 222.74 Lakh (excl. GST)

b Minimum Average Annual Turnover^ (MAAT) for best three (3) years i.e. 36 months out of last five (5) financial years of the bidder should be Rs. 1233.18 million or equivalent for Reactor Package RT-08 ^ Annual gross revenue from operations/gross operating income as incorporated in the profit & loss account excluding other income.

c Bidder shall have liquid assets (L.A.) or/and evidence of access to or availability of credit facilities of not less than Rs. 205.53 million or equivalent for Reactor Package RT-08

Note: (i) In case bidder is a holding company, the Financial Position criteria referred to in para 2.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in para 2.0 above shall be that of subsidiary company only (i.e. excluding its holding company). (ii) In case bidder has established manufacturing facility in India and yet to complete three (3) financial years, the Net Worth and average of the turnover as per financial statement for completed financial years shall be considered for the purpose of compliance to the specified Net Worth and MAAT requirements. (iii) In case of bidder qualifying through Route-3 but not meeting the Financial Position requirement as per note (i) read along with note (ii) above, the following shall be applicable: In case bidder is yet to complete five (5) years from the date of commercial production of such equipment(s) but no later than seven (7) years from the date of incorporation of the said company as on the originally scheduled date of bid opening as above, the financial position requirement as per para 2.0 (b) & (c) of parent/principal company providing collaboration for technological support shall be considered. However, once he meets the turnover requirement on their own or completes five (5) years from the date of commercial production of such equipment(s) in India but no later than seven (7) years from the date of incorporation as on the originally scheduled date of bid opening as above, the financial position requirements as specified at 2.0 (b) and (c) above shall also be required to be met by such bidder on their own as per note (i) above and not based on their parent/principal company. Further, in case the bidder is yet to complete one (1) financial year, the Net worth requirement as per para 2.0 (a) above of parent/principal shall be considered.

(iv) Relaxation for Start-Ups^/ MSEs Start-Ups^/MSEs, meeting the specified requirements at Para 2 (a) above in Financial Position shall also be considered qualified if they meet Eighty (80) % of the requirement specified at Para 2 (b) & 2 (c) above in Financial Position. ^ Start-Ups as defined by DIPP, applicable as on the originally scheduled date of bid opening.

Note: For MSME registered firm, relaxation of 20% on financial aspects i.e MAAT requirement will be considered

{In support of its ‘Financial Position’, in line with the above, the Bidder (in case of bidding by single firm ) or Company/Constituents must provide the relevant information in support of the same, along with documentary evidence, in the following format}

4.0 Financial Qualification Data for Bidder: 2 or more

Name of the Bidder

Whether the complete Annual Reports together with Audited Financial Statement of accounts/equivalent documents of the company for the FY of immediately preceding the date of submission of bid are available?

Financial year Networth (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

A Turnover details:

Sl No Financial year Turnover (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

5.0 Financial Qualification Data for Parent/Principal Company/Collabrator (If Applicable): 0

Name of Parent/Principal Company/Collabrator

Whether the complete Annual Reports together with Audited Financial Statement of accounts/equivalent documents of the company for the FY of immediately preceding the date of submission of bid are available?

Financial year Networth (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

B Turnover details:

Sl No Financial year Turnover (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

6 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}

6.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.

Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.

II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.

6.2 Technical Credentials: List of work regarding past experience indicating the execution of similar work successfully, schedule time of completion and actual time of completion, the present status of projects in hand along with presently envisaged completion dates, qualification and experience of key personnel proposed for carrying out the subject work. List of available T & P and Manpower available with the bidder is also to be enclosed. Litigation History: The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder may result in rejection of Bid.

6.3 The Bidder should accordingly also provide the following information/documents

Audited balance sheet and income statements for the last five years as per the following:

A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-3(QR)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Qualifying Requirement Data)

Bidder’s Name and Address (Lead Partner of) : To:

Contract Services

Address: 0 "Saudamini", Plot No. 2, Sector 29

0 Gurgaon (Haryana) - 122001

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).

* We have submitted bid as individual firm.

* We have submitted bid as joint venture of following firms :

(ii) 0 2 or more

(* Strike-off whichever is not applicable)

[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status;

b) The principal place of business;

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

b) Joint Venture Agreement.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].

S No. Particulars Name of the Bidder

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of

9 Whether the bidder is an MSE (Micro & Small Enterprise). If Yes, attach Documentary Evidence with the Bid.

10 Whether the Bidder is a Start-Ups Company (as defined by DIPP). If Yes, attach Documentary evidence with the Bid.

2.0 TECHNICAL REQUIREMENTS {Reference para 1.0 of Annexure-A (BDS)}

2.1 TECHNICAL EXPERIENCE

2.1.1 The bidder must have designed, manufactured, tested, supplied, installed and commissioned 345kV or above class 3-phase transformers of at least 200 MVA or at least three (3) nos. 1-phase Transformers each having capacity of at least 66.7 MVA and the same Transformer(s) must have been in satisfactory operation* for atleast two (2) years on the originally scheduled date of bid opening i.e. 19.02.2019.

*Satisfactory operation means certificate issued by the Employer certifying the operation without any adverse remark.

2.1.2 The 345 kV or above class transformer manufacturer(s) who have established production line in India for these equipment(s) based on technological support of a parent company or collaborator for the respective equipment(s) can also be considered provided i) such manufacturer has designed, manufactured, tested, supplied, installed and commissioned 220KV or above class transformers. ii) the parent company (Principals) or collaborator meets qualifying requirements stipulated at para 2.1.1 above; and iii) The 345 kV or above class transformer manufacturer(s) furnishes a) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and b) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10 % of the cost of such equipment (s). This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder. Note-1: In case bidder is a holding company, the technical experience referred to in clause 2.1.1 and 2.1.2 above as the case may be shall be of that holding company only (i.e. excluding its subsidiary/group companies). In case bidder is a subsidiary of a holding company, the technical experience referred to in clause 2.1.1 and 2.1.2 above as the case may be shall be of that subsidiary company only (i.e. excluding its holding company).

2.1.3 Using the following format, each Bidder (individual firms or partners of a joint venture) is requested to list the experience as detailed above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each experience of the Bidder

(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).

Format for the Bidder OR Parent Company / Collaborator(s)/ Subsidiary (meeting para 1.1.1, Annexure-A to BDS) in support of meeting the requirement of para 1.1.1, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Bidder’s Name : 0 0

1 Name of Contract Undertaken (for 345kV or above class Transformers) 0

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm

4 Voltage Level of Transformer erected under the Contract (Indicate 345kV or above class only)

5 No. of Transformer (s) under the contract (Indicate nos. of 345kV or above voltage class Transformer not less than 200MVA or equivalent capacity in banks of 3 single phase units each having capacity of at least 66.7 MVA, during the last Two (2) years)

6 MVA capacity of above mentioned 3-phase/1-phase units

7 Name of the substation or switchyard

8 No. of years, the above Transformer are in operation as on the date of bid opening. (Originally Scheduled)

9 Scope of work involved under the Contract

(Tick whichever is/are applicable)

of Transformer of Transformer of Transformer

10 Details of documents uploaded in support of the above stated experience

Format for the Bidder in support of meeting the requirement of para 1.1.2, Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

a Name of the Bidder

b Whether Bidder/Manufaturer established production line in India for 345kV or above class transformer

c Name of the Parent Company/Collaborator for the 345kV Transformer {The qualifying data for the parent company or collaborator for the equipment is furnished in Format-A above)

1 Name of Contract Undertaken

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the Bidder

4 Indicate details below in case Contract executed for Transformer

(i) Voltage Level of Transformer erected under the Contract (Indicate 220kV or above class only)

(ii) No. of Transformer (s) under the contract (Indicate nos. of 220kV or above voltage class Transformer only)

(iii) Name of the substation or switchyard

(iv) No. of years, the above Transformer are in operation as on the date of bid opening.

(v) Scope of work involved under the Contract

(Tick whichever is/are applicable)

of Transformer of Transformer of Transformer

5 Whether parent company / collaborator(s) meets the technical experience criteria stipulated at 2.1.1 , and the details of which is mentioned at Format-A above. (Choose whichever is applicable from the drop down menu) Yes

6 Whether legally enforceable undertaking jointly by Bidder and the parent company / collaborator(s) (as per enclosed format in Section-VI: Sample forms and Procedures of the bidding documents) is furnished along with the bid. (Choose whichever is applicable from the drop down menu)

7 Confirmation letter from the Parent Company / Collaborator along with the bid stating that Parent Company / Collaborator shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s). (Choose whichever is applicable from the drop down menu)

8 Details of documents uploaded in support of the above stated experience

3.0 FINANCIAL REQUIREMENTS :

Financial Position {Reference para 1.2 of Annexure-A (BDS)} For the purpose of this particular bid, bidders shall meet the following minimum criteria:

a) Net Worth for last 3 financial years should be positive b) Minimum Average Annual Turnover* (MAAT) for best three years i.e. 36 months out of last five financial years of the bidder should be INR 1075.90 million. * Note- “Annual gross revenue from operations/gross operating income as incorporated in the profit & loss account excluding other income”. c) Bidder shall have Liquid Assets (LA) and/or evidence of access to or availability of credit facilities of not less than INR 179.32 million. Note 1:- In case bidder is a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of subsidiary company only (i.e. excluding its holding company).

Note 2:- Relaxation for Start-Ups^/ MSEs Start-Ups^/MSEs, meeting the specified requirements at Para 3.0 (a) above in Financial Position shall also be considered qualified if they meet Eighty (80) % of the requirement specified at Para 3.0 (b) & 3.0 (c) above in Financial Position. ^ Start-Ups as defined by DIPP, applicable as on the originally scheduled date of bid opening.

{In support of its ‘Financial Position’, in line with the above, the Bidder (in case of bidding by single firm ) or Company/Constituents must provide the relevant information in support of the same, along with documentary evidence, in the following format}

4.0 Financial Qualification Data: 2 or more

Name of the Bidder 0

Details of documentary evidence submitted in support of Qualification Data

Networth (in Rs. Millions)

Sl No Financial year

For the FY of immediately preceding the date of submission of bid.

B Turnover details:

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Rs. Millions)

Sl No Financial year

For the FY of immediately preceding the date of submission of bid.

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Millions) Details of documentary evidence submitted in support of Qualification Data

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

Name of Other Partner-1 of JV 0

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Networth (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

B Turnover details:

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Turnover (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

C Liquid Assets

LA Equivalent US$ (in Million)

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

Name of Other Partner-2 of JV 0

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Networth (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

B Turnover details:

Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data

Turnover (in Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

Average Annual Turnover for best Three Years is

*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)

C Liquid Assets

LA Equivalent US$ (in Million)

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

4.0 Joint Venture (JV) Firms {Reference para 3.0 of Annexure-A (BDS)}

In case a bid is submitted by a Joint Venture (JV) of two or more firms as partners, all the partners of Joint Venture shall meet collectively requirements stipulated at clauses 3.0 (b) & 3.0 (c) above. The figure of average annual turnover and liquid assets/credit facilities for each of the partners of the JV shall be added together to determine the JV’s compliance with the minimum qualifying criteria set out in Para 3.0 (b) & (c) above.

However, for a JV to be qualified, the partner(s) of JV must also meet the following minimum criteria: i. All the partners of the JV shall meet individually the Financial Position criteria given at 3.0 (a) above. ii. The Lead Partner shall meet, not less than 40% of the minimum criteria given at clause 3.0 (b) & (c) and 100 % of the criteria given above at clause 2.1 iii. The other partner(s) shall meet not less than 25% of the criteria given at clause 3.0 (b) & (c) above and 100 % of the criteria given above at clause 2.1 or 2.2 Failure to comply with this requirement will result in rejection of the joint venture’s bid.

In case of Joint venture, the following conditions shall also apply:

(a) the bid, and in case of successful bid, the specified Form of Agreement shall be signed so as to be legally binding on all partners (as per enclosed format in Section-VI, Vol.-I of bidding document).

(b) one of the partners shall be nominated as Lead Partner, and the Lead Partner shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the Joint Venture, and the entire execution of the Contract shall be done with the Lead Partner and payment under the contract shall be received by the Lead Partner on behalf of the Joint Venture as per power conferred to him in the Power of Attorney. The authorization shall be evidenced by submitting a Power of Attorney signed by legally authorized signatory of all the partners as per Performa in in Section-VI, Vol.-I of bidding documents. The payment under the Contract can also be received by other partner(s) based on authorization of Lead Partner.

(c) All partners of the joint venture shall be liable jointly and severally for the execution of the Contract in accordance with the Contract terms and a statement to this effect shall be included in the authorisation mentioned under (b) above as well as in the Bid Form and in the Contract Form (in case of a successful bid);

(d) Agreement entered into by the Joint Venture partners shall be submitted with the bid.

The bidder shall furnish documentary evidence in support of the qualifying requirement stipulated as above.

4.1 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the documents are submitted alongwith the bid. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents furnished are to be indicated below :

A For Name of the Bidder

B For Name of Other Partner-1 of JV

C For Name of Other Partner-2 of JV

5.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}

5.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.

Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.

II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.

5.2 The Bidder should accordingly also provide the following information/documents

Audited balance sheet and income statements for the last five years as per the following:

A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-3(QR)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Qualifying Requirement Data)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

For our Qualifying Requirements Data, please refer Schedule-QR of this volume.

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-4

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

We hereby certify that equipment and materials to be supplied are produced in [Name of Countries], eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]

We hereby certify that our company is incorporated and registered in [Name of Countries], eligible source country. [Name of Countries] [Name of Countries] [Name of Countries], [Name of Countries],

Date : -- Printed Name :

Place : Designation :

country. country. [Name of Countries], [Name of Countries],

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-4(A)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

0 Faridabad-121002

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

S.No. For Equipment Item Description Unit Quantity

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-4(B)

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-5

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Bought-out & Sub-contracted Items)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of furnishing and installation of the subject Package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

We hereby declare that, we would not subcontract the erection portion of the contract without the prior approval of Employer.

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Annexure I to Attachment-5

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Annexure I to Attachment-5

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Details of the proposed sub-contractor/sub-vendor Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-5A

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)

Bidder's Name and Address: To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 B9, Qutab Institutional Area, Katwaria Sarai

0 New Delhi-110016

1 We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

2 2. The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-5A

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-6

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Annexure I toAttachment-6

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-7

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Details of Alternative Bid)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

No Alternative Bid

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-9

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Work Completion Schedule)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 B9, Qutab Institutional Area, Katwaria Sarai

0 New Delhi-110016

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and completion of works i.e., Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work- Activity Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Breakup of Completion Schedule in Months (Bidder must fill break-up Schedule)

1 Handing over of site to agency/ Mobilization at site

a Establishment of site office

b Kick off meeting

2 Completing statuory requirement of contract such as labour license, Insurance policies- Workmen Compensation Insurance Policy, Contractor All Risk Insurance Policy, etc

3 Sampling and source approval of construction materials including design mix for RCC concrete or as per BPS

4 Excavation of basement

5 RCC structure work below Plinth level

6 RCC structure work above Plinth level

7 All ancillary Civil works including Brick Work, Plaster, Painting, Doors, Windows, Flooring, Water Proofing, Building. Septic tank/ Soak pit, etc

8 Internal & External electrification

10 Fire Fighting work

11 Plumbing & Sewerage work

12 Road, drain, water harvesting, swimming pool work, etc

13 Development of Horticulture work

14 Balance- Internal, external finishing as per requirement of site

15 Handing/ taking over of facilities including submission of "As BUILT DRAWING" and relevant NOCs (if required)

Date : -- Printed Name :

Place : Designation :

Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-10

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Guarantee Declaration)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

Dear Sir, We declare that the ratings, performance figures and availability of the system furnished by us for subject Package covered under this specification are guaranteed by us. We further declare that in the event of any deficiencies in meeting the guarantees in respect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion, reject or accept the equipment after assessing the liquidated damages as specified in the relevant clauses of Bid document. We note that in case we take any deviation regarding the maximum losses, as mentioned above, anywhere in the bid including Attachment-6 (Alternative, Deviations and Exceptions to Provisions), our bid shall be considered non –responsive in line with ITB clause 24.1(b) as modified in Section BDS.

Date -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-11

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel”1 and “Code of Business Conduct and Ethics for Board Members”1 of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority. Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation*

*In case the date of joining in the bidder’s organization of such ex-employee is within 1 year from the date of retirement/resignation from POWERGRID, No Objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard. We further declare that any misrepresentation or submission of false/forged documents/information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.

Date : -- Printed Name :

Place : Designation :

Note: 1. “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergridindia.com. 2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid. 3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-11

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract & Materials

Name : Ram Lal Power Grid Corporation of India Ltd.,

Address : G5 Northern Region-I, Reagional Headquarter

Gurgaon SCO Bay No. 5 to 10, Sector- 16 A

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-11

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract & Materials

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region-I, Reagional Headquarter

SCO Bay No. 5 to 10, Sector- 16 A

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) ATTACHMENT-12

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder) : To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

0 Faridabad-121002

We hereby furnish the relevant details pertaining to the price adjustment provisions for your specifications and documents . The necessary documentary evidence is enclosed.

Sl. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index as 30 days prior to date set for opening of bids

In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I

PV Price Component

I. Supply and Placement of Reinforcement Steel:

i) A- WPI-HSD 0.10 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

ii) B-WPI-Baic Metals 0.65 Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

iii) LabourL= 0.05 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

i) A- WPI-HSD 0.20 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

ii) B-WPI-Cement,Lime and Plaster 0.3 Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in

C-WPI-Cutting ,Shaping and finishing Stone 0.2 Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

iii) LabourL= 0.1 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.

Prices are firm & Fixed

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-13

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Declaration regarding Social Accountability)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-14

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

Integrity Pact is annexed herewith this Volume.

Date : -- Printed Name :

Place : Designation :

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (o).

Power Grid Corporation of India Limited

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai,New Delhi – 110016 hereinafter referred to as

having its Registered Office at

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 1 of 8

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation Package and Specification Number NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as unde r:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles during his participation in the tender process and during the contract execution :

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 2 of 8

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-15

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

I We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made 0

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment. Yes

3. (c ) If 3(b) is ‘Yes’ please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs

3. (d ) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment order 2018 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached.

4. Permanent Account (PAN) No.

5. GSTIN Numbers

I. GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

6 PF Registration No. of the Company

7 PF Regional Office covered (with Address)

8 Name of Contact Person

9 Contact Details

10 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account:

Type of Account: Current Account

11 9 digit MICR code printed at bottom in middle, next to cheque no.

12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

*The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC /ST.

b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited companies, at least 51% share shall be held by SC/ST promoters.

Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-16

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Additional Information)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder (Sole Bidder) 0

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

2.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.

3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years

Year Name of client Details of Transgression of Integrity Pact by the bidder

4.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

5.0 Details of Provident Fund Code Number of the Bidder [ref. ITB9.3(q)]

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-17

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Declaration for tax exemptions, reductions, allowances or benefits)

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 B9, Qutab Institutional Area, Katwaria Sarai

0 New Delhi-110016

1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.

2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):

Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any

(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-17

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract & Materials

Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,

Address : …… ……. …….. …… ……. …….. B9, Qutab Institutional Area, Katwaria Sarai

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-17

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract & Materials

Name : Power Grid Corporation of India Ltd.,

Address : B9, Qutab Institutional Area, Katwaria Sarai

New Delhi-110016

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-18

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

Safety Pact is attached herewith this Volume

Date : -- Printed Name :

Place : Designation :

Instruction for printing & submitting Safety Pact

1. The requisite format of Safety Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other six pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Safety Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (s).

Between #REF! #REF!

Power Grid Corporation of India Limited #REF! #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 1 having its Registered Office at ,

having its Registered Office at ,, 1 AND

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation Specification Number:NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864)

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Safety Pact Page 1 of 6

POWERGRID values full compliance with all relevant laws and regulations and the principles of Safety, Health& Environment in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder / Contractor enter into this agreement called “Safety Pact” which will form part of the Bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

POWERGRID commits itself to take all measures necessary to prevent accidents duringConstruction and Operation of the Transmission Assets and to observe the following:

1. POWERGRID recognizes and accepts its statutory responsibilities for ensuring construction, operation and maintenance of equipments and for the provision of safe methods of work and safe working conditions.

2. POWERGRID recognizes and accepts its statutory responsibilities for ensuring safety of not only its employees but also that of the Contracting Agencies as Principal Employer.

3. POWERGRID shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction as well as Operation & Maintenance of the Transmission Assets.

4. POWERGRID shall conduct necessary awareness and training programmes to its Employees to augment the various safety requirements to be followed during Construction and Operation & Maintenance of the Transmission Assets from time to time.

5. POWERGRID shall, from time to time, issue necessary guidelines,instructions and deterrents to its employees as well as to the Contracting Agencies, to update them to take necessary preventive measures to avoid repetition of similar accident attributes.

6. POWERGRID shall review and provide necessary guidanceto the Contracting Agencies, as and when, any abnormality / special situations are brought to its notice by the Contracting Agencies during execution of the Transmission Projects being executed by them.

7. POWERGRID shall conduct periodical surveillance site inspections / audits to identify the unsafe conditions and unsafe actions, and bring them to the knowledge of the Contracting Agencies for taking timely corrective actions.

8. POWERGRIDshall investigate all accidents, fatal as well as non-fatal, to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents, and fix responsibility for the lapses leading to the accident.

9. POWERGRID shall augment the training to the workers and supervising personnel of the Contracting Agencies, as per schedules, upon nomination by the Contracting Agencies in reasonable time frame.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Safety Pact Page 2 of 6

10. POWERGRID shall exercise the right to claim and recover compensation from the Contracting Agencies in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the applicable Laws and contractual specifications / guidelines in vogue / issued by POWERGRID from time to time.

Section II – Commitments of the Bidder / Contractor:

The Bidder / Contractor commits himself to take all measures necessary to prevent / minimise accidents at their construction / erection sites and to observe the following:

1. The Bidder / Contractor recognizes and acceptsthe statutory and comprehensive responsibility for ensuring safe construction and Testing & Commissioning in the Transmission Projects being executed by thembyproviding safe methods of work, working conditions and Tools & Plants for human safety.

2. The Bidder / Contractor recognizes and accepts the responsibilities for ensuring safety of not only their employees but also that of the Sub-contractors, Principal Employer and the general public during execution of the Transmission Projects / works.

3. The Bidder / Contractor shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction of the Transmission Assets.

4. The Bidder / Contractor shall endeavour continuous development of safe methods of work to ensure that the effect of risks and perils are minimised to the extent possible and implement the same at their worksites.

5. The Bidder / Contractor shall conduct periodical Training to their Employees as well as to that of theirSub-contractors for safety awareness during construction works being executed by them.

6. The Bidder / Contractor shall provide all requisite Tools & Plants required for the work and ensure their healthiness by periodical inspections / testing as required. Unhealthy and sub-standard Tools & Plants will be immediately removed from site as and when they are identified.

7. The Bidder / Contractor shall,at their cost, provide all necessary Personal Protective Equipments such as Double Lanyard Safety Belts, Appropriate Fall Arrest Systems, Safety Helmets, Foot Wear, Hand Gloves, etc., as required for various activities pertaining to execution of the Projects / works, confirming to relevant Indian Standards.

8. The Bidder / Contractor shall ensure that dedicated qualified Safety Officers are posted in the construction projects being executed by them and ensure that the Safety Officer visits each and every gang periodically and conducts audits / inspections to identify the unsafe conditions and unsafe actions, to be rectified by the site supervising personnel promptly.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Safety Pact Page 3 of 6

9. The Bidder / Contractor shall conduct appropriate medical checks-up for the workers before deploying them at their construction sites to ensure that only those who are medically fit are deployed in the Projects / works to be executed by them. The copy of the Medical Reports shall be provided by the Bidder / Contractor to POWERGRID, whenever requested by POWERGRID.

10. The Bidder / Contractor shall screen the workers before deploying them at their construction sites to ensure that only those with the skills, experience and competence to work at heightand also medically fitfor work at height are deployed for work at height in the Projects executed by them.

11. The Bidder / Contractor shall ensure daily before starting the work thattheir site Supervising Personnel / Safety Officer briefs the workers about the work for the day and the safety measures / precautions required to be taken by them.

12. The Bidder / Contractor shall investigate all the accidents at their working sites to ascertain the lapses leading to the incident and the precautionary / corrective measures required to be taken to avoid recurrence of such accidents. These accidents will be reviewed at the Board Management level of the Agencies and the findings / recommendations will be put up to POWERGRID Apex Safety Board within the stipulated period.

13. The Bidder / Contractor shall ensure that all accidents, whether fatal or non-fatal in nature, will be informed to POWERGRID, in writing, immediately on the occurrence of the same,and in any case, within not more than 24 hours of occurrence of the same.

14. The Bidder / Contractor shall ensure that in case of any accident, all necessary medical help / supportshall be provided to the victims / injured till they are completely fit to return to work.

15. The Bidder / Contractorshall ensure that in case of fatal accidents, all statutory Authorities, including Police, concerned Labour Dept. Officials, concerned Workmen Compensation Commissioner, etc., will be intimated in writing as required by the statutory Law, and followed up for compliance of all statutory obligations. The Bidder / Contractor shall own full responsibility of timely accident reporting to various authorities, including POWERGRID.

16. The Bidder / Contractor shall ensure that in case of fatality or serious injury leading to permanent disablement of the victims, the compensation amount will be deposited with the concerned authorities, as required by the Laws, and followed up for early disbursement to the beneficiaries of the victims.

17. The Bidder / Contractor assures that they shall co-operate to the fullest extent for carrying out any investigation of the accidents at their work sites by POWERGRID to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents. All factual details of the occurrence of the accident will be provided to POWERGRID, as and when required.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Safety Pact Page 4 of 6

18. The Bidder / Contractor assures that they take full responsibility of meeting the statutory obligations in case of accidents, and in case of any reference by any Statutory Body at a later date also, they shall provide all information to POWERGRID and meet all the statutory obligations, including payment of additional compensation, if any.

19. The Bidder / Contractor assures that in case of any inspection of their work site or Notice by any Statutory Authority, they shall comply promptly and inform POWERGRID Site Officials of the same, and also provide all necessary information and assistance for smooth compliance of the observations / instructions of such Authorities.

20. The Bidder / Contractor accepts the provisions regarding safety, including payment of compensation to POWERGRID, in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the Contractual Conditions, Safety Planand the Safety Pact, and confirm to abide by the same.

Section III – Equal treatment to all Bidders / Contractors:

1. POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

2. POWERGRID will disqualify, from the tender process, any bidder/ take punitive actions on the bidder, who does not sign this Pact or violate its provisions.

Section IV – Pact Duration:

This Pact begins when both parties have legally signed it. It expires for the successful Bidder / Contractor after closure of the contract and, for all other Bidders, after the contract has been awarded.

Section V – Other Provisions:

1. This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under the Safety Pact.

2. Changes and supplements need to be made in writing, which shall come into force only upon mutual agreement / acceptance.

3. If the Contractor is a partnership firm or consortium of Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venue partners, as applicable as per the Tender Specifications.

4. Nothing in this agreement shall affect the rights of the parties available under General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

5. Should one or several provisions of this agreement turn out to be invalid, the reminder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

Safety Pact Page 5 of 6

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Safety Pact Page 6 of 6

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Attachment-19

Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation

Bidder’s Name and Address To:

Contract & Materials

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Northern Region-I, Reagional Headquarter

0 SCO Bay No. 5 to 10, Sector- 16 A

Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :

Date : -- Printed Name :

Place : Designation :

Specification No. :NR1/NT/W-CIVIL/DOM/I00/25/14315 (RFX- 5002004864) Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No. 5 five 5 th 5 May

Date : -- 6 six 6 th #VALUE! 6 June

7 seven 7 th #VALUE! 7 July

To: 8 eight 8 th #VALUE! 8 August

Contract & Materials 9 nine 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 ten 10 th 10 October

Northern Region-I, Reagional Headquarter 11 eleven 11 th 11 November

SCO Bay No. 5 to 10, Sector- 16 A 12 twelve 12 th 12 December

13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Construction of (i) 03 Open Platforms (25m x 20m each), (ii) 01 Nos. of closed store (24m x 10m) with septic tank and (iii) construction of 250 RM RCC Road at Bikaner substation 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

1.0 Having examined the Bidding Documents, including Amendment Nos. ...[Enter the Amendment]… dated …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). ...[Enter the Amendment]… …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th

1.1 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.

2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

or documentary evidence in support of exemption of Bid Security, in separate envelope in accordance with clause 21 of ITB, Section-II." Please note that if bid validity is less than 06 (six) months, your bid may be rejected

(b) Attachment 2() : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Bank Guarantee (0) 21 st

*Further the requisite deed of Joint Undertaking as per stipulated qualification requirement in Annexure-A (BDS) has also been furnished as per your format.

* Delete if not applicable

(c) Attachment 3() : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents [Attachment – 3(QR)]. 22 th

Further, the required Joint Venture Agreement signed by us and our Partners has also been furnished as per your format Attachment-3(JV). #REF! Applicable 23 th

Further the required deed of Joint Undertaking signed by us and Tower Manufacturer has also been furnished as per your format. 0 #REF! Not Applicable 24 th

(d) Attachment 4() : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B. 25 th

(e) Attachment 5() : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th

(f) Attachment 5A() : Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises. 26 th

(g) Attachment 6() : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th

(h) Attachment 7() : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. (Not Applicable) 28 th

(i) Attachment 8() : Manufacturer’s Authorisation Forms. 29 th

(j) Attachment 9() : Work Completion Schedule. 30 th

(k) Attachment 10() : Guarantee Declaration. 31 st

(l) Attachment 11() : Information regarding ex-employees of Employer in our firm.

(m) Attachment 12() : Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.

(n) Attachment 13() : Declaration regarding Social Accountability.

(o) Attachment 14() : Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.

(p) Attachment 15() : Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(q) Attachment 16() : Additional Information.

(r) Attachment 17() : Declaration for tax exemptions, reductions, allowances or benefits

(s) Attachment 18() : Safety Pact

(t) Attachment 19() : Declaration.

(u) Attachment 20() : Declaration of Key Managerial Person jointly with Power of Attorney holder

(v) Attachment 21() : Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order December 2018, if applicable

(w) Attachment 22() : Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, and MoP Order December 2018, if applicable

(x) Attachment 23() : Declaration by the bidder regarding events encountered pursuant to ITB Clause 2.1

3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) ITB 13 Bid Security

(b) GCC 2.14 Governing Law

(d) GCC 55 Terms of Payment

(e) GCC 8.3 Performance Security

(f) GCC 6 Taxes and Duties

(g) GCC 38 Liquidated Damages for Delay by Contractor

(h) GCC 40 Defect Liability

(i) GCC 39 Guarantee

(j) GCC 20.5 Patent & Royalties

(k) GCC 61 Limitation of Liability

(l) GCC 57 Settlement of Disputes

(m) GCC 59 Arbitration

(n) Appendix 2 to Form of Contract Agreement Price Adjustment

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 2

13.0 We are a Micro and Small Enterprise (MSE) registered with , a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012. 2

14.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of 0

Date : -- Printed Name :

Place : Designation :

In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him

#REF! Printed Name :

#REF! Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred