Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹39.8 L+₹14,698 (0.37%)Rejected-Finance B BLOCK 2 3 RAM BACHAN V B NAGAR PIPE ROAD KURLA W MUMBAI 400070 | MUMBAI SUBURBAN | MAHARASHTRA | 400070 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹40.0 L+₹33,765.40 (0.85%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹40.0 L+₹35,615 (0.90%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹40.5 L+₹85,920 (2.17%)Rejected-Finance 15 281 CHHILI INT ROAD GHATIYA AZAM KHAN AGRA UTTAR PRADESH 282003 | AGRA | UTTAR PRADESH | 282003 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
2 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
PERIODICAL SERVICES TO CERTAIN BLDGS UNDER AGE BR II UNDER GE NW KUNJALI COLABA MUMBAI
2022_MES_559975_1
8532/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.4 L
Yes
18 Jan 2023
27 Oct 2022
5 Dec 2022
27 Oct 2022
2 Dec 2022
17 Nov 2022
27 Oct 2022 - 15 Nov 2022
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and directed by Engineer-in-Charge
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and directed by Engineer-in-Charge
Material and Labour Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and directed by Engineer-in-Charge
Rendering 20mm thick in two coats(15mm inner coat 5mm finishingcoat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions including necessary scaffolding for high rise bldgs etc complete all as specified and directed by Engineer-in-Charge(Water proofing compound to be measured and paid for separately).
Material and Labour Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and directed by Engineer-in-Charge
Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge
Material and Labour brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge
Material and Labour for brick work with sub class 'B' bricks straight or curved on plans to any radius in half brick thick walls built in cm (1:4) complete all as specified and directed by Engineer-in-Charge
Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of plastered /unplastered surfaces of ceiling surfaces and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scaffolding for high rise bldgs etc complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat Chalk whiting, on plastered surfaces, complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge
Material and Labour for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and directed by Engineer-in-Charge by the Engineer-in-Charge.
Material and Labour for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water etc and applying two coats of plastic paint over a coat of primer complete all as specified and directed by Engineer-in-Charge
All as per item No 18.00 above but one coat complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc complete all as specified and directed by Engineer-in-Charge
Material and Labour Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scafolding for high rise bldgs. etc complete all as specified and directed by Engineer-in-Charge
Material and Labour preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scaffolding for high rise bldgs complete all as specified and directed by Engineer-in-Charge
Grinding and polishing existing floor of any type (kota stone/mossaic/cuddpah stone floor) complete all as specified and directed by Engineer-in-Charge
Material and Labour preparation of old decorated surfaces of cement concrete tiles ,floor (paver block/chequered tiles) and applying one coat of floor paint in proportion as per manufacturers instructionscomplete all as specified and directed by Engineer-in-Charge
French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparing old treated surface applying one coat of varnishing over a coat of woodfiller transparant complete all as specified and directed by Engineer-in-Charge by Engr-in-Charge.
Taking down chowkats or frames n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge
Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified and directed by Engineer-in-Charge
Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge
Supply and Fixing factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed by Engineer-in-Charge
Supply and Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and directed by Engineer-in-Charge
Supply and Fixing factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partion/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc all as specified and as directed by Engr- in- charge.
Supply and Fixing in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.
Supply and Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs 18/19 mm thick prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete complete all as specified and directed by Engineer-in-Charge
All as per item No 45.00 above but 9 mm thick pre-laminated partical board fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 12mm thick prelaminated medium density fibre board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed by Engineer-in-Charge
Supply and Fixing for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed by Engineer-in-Charge
Supply and Fixing butt hinges 100 mm mild steel hinges medium weight and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing butt hinges 100 mm stainless steel hinges medium weight and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed by Engineer-in-Charge
Material and Labour for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165 complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs 125 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge
Material and Labour for gently cleaning the surface of the stone masonary/ stone chips and piers with specialized eater misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting followed up by gentle brushing with soft nylon brushes as specified and milded. Gentle surface cleaning may include using water misting and PH balanced surfactants as specified for indicated areas to remove surface dirt grit surface accretions, lime wash painting etc by means of water misiting and PH balanced surfactants and cleaning complete all as specified and directed by Engineer-in-ChargeNote : Quoted rate shall be inclusive of removing vegetation on wall surfaces.
Material and Labour for applying 4mm thick finished texture mortar in CM 1:2 (Mix one part of white cement & two parts of Dholpuri clear quarts powder of 1 to 2 mm grading) incl texture finish shall be achieved with the help of hand driven machine incld preparation of old painted surface & newly plastered surfaces and making plain surface of stone masonary pattern incld irrection & dismantling of scaffolding to carrying out works upto triple stories Bldg complete all as per manufactures instructions complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with fixing brackets, Knobs rollers etc.complete all as specified and directed by Engineer-in-Charge
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing complete all as specified and directed by Engineer-in-Charge
Supply and Fixing PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge
Material and Labour for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and directed by Engineer-in-Charge
Material and Labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable flase ceiling, complete complete all as specified and directed by Engineer-in-Charge
Supply and Fixing roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed by Engineer-in-Charge
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge
Supply and Fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engineer-in-Charge
Material and Labour for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base complete all as specified and directed by Engineer-in-Charge
Material and Labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined with grey cement and pigment complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
Material and Labour plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge
Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed by Engineer-in-Charge
Material and Labour 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge
Material and Labour for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge
Material and Labour for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge
Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete complete all as specified and directed by Engineer-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified and directed by Engineer-in-Charge
Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.
Material and Labour for coloured glazed ceramic tiles 450x300x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3 complete all as specified and directed by Engineer-in-Charge
Material and Labour double charge premium quality virified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed by Engineer-in-Charge
Material and Labour double charge premium quality virified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge
Material and Labour double charge premium quality vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm),but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge
Material and Labour in repairs Cast iron nahani trap with grating including jointing to waste pipe run lead 100 mm complete all as specified and directed by Engineer-in-Charge
Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with ms clamps complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 160mm dia bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 75 mmbore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge
Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and directed by Engineer-in-Charge
Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified and directed by Engineer-in-Charge
Supply and Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge .
Supply and Fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge .
Material and Labour Apply evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface complete complete all as specified and directed by Engineer-in-Charge
Material and Labour lime concrete in lime morter 1:2 (40mm graded aggregate) with brick aggregate complete all as specified and directed by Engineer-in-Charge
M/L PCC 1:3:6 type C-2, 100 mm thick as in sub base for sunken slab/floor complete all as specified mixed with WPC 3% by weight of cement, finished even and smooth without using extra cement. (WPC shall be measured and paid separately) complete all as specified and directed by Engineer-in-Charge
Material and Labour for 20 mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130 ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for sunken slab/floor complete all as specified and directed by Engineer-in-Charge ( liquid water proofing Compound are measure separately)
Supply and Fixing in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge
Supply and fixing cast iron 'P' trap 100mm dia complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs fancy type angle valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed by Engineer-in-Charge
Supply and Fixing PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge
Supply and Fixing vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and directed by Engineer-in-Charge
Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs complete all as specified and directed by Engineer-in-Charge
Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs complete all as specified and directed by Engineer-in-Charge
Dismantling water tank of capacity exc. 1000 Ltrs but n.exc. 2000 ltrs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing rotational moulded polythylene water storage tank of 500 ltr capacity (Cylindrical vertical with closed top) hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge
Supply and Fixing rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge
Supply and Fixing rotational moulded polythylene water storage tank of 1000 ltr capacity (Cylindrical vertical with closed top) hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge
Supply and Fixing rotational moulded polythylene water storage tank of 2000 ltr capacity (Cylindrical vertical with closed top) hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Corner glass shelf with brackets complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and directed by Engineer-in-Charge
Supply and Fixing under counter wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as specified and directed by Engineer-in-Charge Make - Jaquar CAT PART NO- CNS-WHT-705.
Supply and Fixing single piece WC with UF soft close seat cover, hinges, fixing accessories set and accessories set, cistern fittings incl trap/connecting piece complete complete all as specified and directed by Engineer-in-Charge (Make - Jaquar)or as approved by GE
Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing where complete all as specified and directed by Engineer-in-Charge
Supply and Fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge
Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 3mm thick sheet glass frosted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge .
Genius Construction Co.
MADHU ENTERPRIZES
SHRI SAI ENTERPRISES
Garima Construction Co
Anil Industrial Corporation
PRABHU ASSOCIATES
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .