Delhi

Financial BO

Works

Electrical Works

MOEI and Fans and Pump Sets i/c Compound lights at various VREC Center, New Delhi during the year 2026-27

Public Works Department

New Delhi | South Delhi, Delhi

Amount: ₹4.6 LCloses: 2 Jun 2026Closed

Timeline

Published26 May 2026
Closed2 Jun 2026
Financial Evaluation4 Jun 2026
Award—

Bids

Percentage

4 Bids4 Jun 2026

#	Company	Quoted %	Amount	Rank	Status
1	tej Enterprises L1₹4.0 LAdmitted-Finance	-13.50%	₹4.0 L	L1	Admitted-Finance
2	RAJA ELECTRICAL ENGINEERING WORKS L2₹4.2 L+₹16,681.25 (4.16%)Admitted-Finance 15 119 DAKHINPURI NEW DELHI 110062 \| SOUTH \| DELHI \| 110062	-9.90%	₹4.2 L+₹16,681.25 (4.16%)	L2	Admitted-Finance
3	Anand Electricals L3₹4.4 L+₹38,876.58 (9.70%)Admitted-Finance 0 DOGRA CHOWK JEWEL JAMMU JAMMU JAMMU KASHMIR 180011 \| JAMMU \| JAMMU AND KASHMIR \| 180011	-5.11%	₹4.4 L+₹38,876.58 (9.70%)	L3	Admitted-Finance
4	D K Gupta Electrical Works L4₹4.8 L+₹76,919.09 (19.2%)Admitted-Finance H 123 GYAN MANDIR ROAD GALI NO 3 JAITPUR EXTENSION BADARPUR NEW DELHI 110044 \| NEW DELHI \| SOUTH EAST DELHI \| DELHI \| 110044	+3.10%	₹4.8 L+₹76,919.09 (19.2%)	L4	Admitted-Finance

Tender Value

₹4.6 L

EMD Value

₹9,267

Closing Date

2 Jun 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Assistant Engineer (E) SD-II

Address

O/o The Assistant Engineer(E), PWD EMSD II M SOUTH, Hauz Khas, New Delhi

Work Description

Misc. Electrical work and Air Conditioners in various location at VREC Centers and Employment office, New Delhi

Tender Information

Tender ID

2026_PWD_292026_1

Reference Number

23/EE(E)/PWD EMD SOUTH/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

30 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

16 documents required · 16 mandatory

Fee/PreQual/Technical

RequiredEarnest Money as per NIT (.pdf)

Requiredii) CPWD registered contractor shall upload the enlistment order. (.pdf)

Requirediii) Certificate of registration of GST (.pdf)

Requirediv) GST Registration Certificate of the State in which the work is to be taken up, if al (.pdf)

Requiredv) Copy of receipt for deposition of original EMD to division office of any Executive Engineer (.pdf)

Requiredvi) Valid Electrical License or undertaking regarding that work shall be carried out through ele (.pdf)

Requiredvii) Scanned copy of PAN Card (.pdf)

Requiredviii) If the bidder has not obtained GST registration in the State in which the work is to be taken (.pdf)

Requiredix) Affidavit on Non Judicial Stamp Paper of Rs. 100 as per Form-E (Required from both CPWD (.pdf)

Requiredx) Contractor shall provide the communication details on letter head like communication address and (.pdf)

RequiredCertificates of Work Experience for Non-CPWD Registered contractor (.pdf)

Requirediii) Affidavit as per clause 1.2.2 of CPWD 6. (.pdf)

Requirediv) Should have average annual financial turnover of at least Rs. 1.39 Lakh (30 of Estimated cost) (.pdf)

Requiredv) Should not have incurred any loss(profit after tax should be positive) in more than 2 years durin (.pdf)

Requiredvi) Should have a Solvency of Rs. 1,85,347/- from the bank as prescribed (40 of Estimated cost). (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹9,267

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

4 Jun 2026

Published

26 May 2026

Bid Opening

2 Jun 2026

Download Starts

26 May 2026

Download Ends

2 Jun 2026

Submission Starts

26 May 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (19 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).
1.01	2.0 TR with 5 Star BEE Rating	2	Nos.	57,396	₹1,14,792
1.02	1.5 TR with 5 Star BEE Rating	1	No.	43,539	₹43,539
2Supplying , Installation, Testing and Commissioning of Window type Air conditioners complete with copper power cable upto 3 Mtr, wireless Remote, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing, cooling, dehumidification, air circulation, R-32/R-410A /R-407B Green Refrigerant with Scroll / rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P & labour etc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-I 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 0C. The system shall be able to operate up to 50 0C (out door ambient temperature).
2.01	1.5 TR with Inverter 5 Star BEE rating	2	Nos.	40,074	₹80,148
3	Supply , Installation, Testing and Commissioning of Automatic Line voltage correctors and wall mounted type for domestic use, copper wound complete with the voltmeter to indicate input voltage rating with auto cut off and time delay relay complete as required a) Capacity 5.0 KVA.	5	Nos.	3,488	₹17,440
4	Providing and fixing of refrigerant copper pipe of (5/8" & 1/4" size) suitable for 2 TR capacity split type AC unit i/c installation of refrigerant pipe with 1/2" thick (N.S) nylon insulation pipe covered with 50mm dia PVC flexible pipe etc. complete as required.	20	Mts.	1,151	₹23,020
5	Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.	5	Nos.	807	₹4,035
6	Providing and fixing MS angle iron frame made out of 35mm X 35mm X 5mm (N.S) of size 900mm X 300mm X 150mm(N.S) i/c painting suitable for mounting of 2.0 Ton capacity split AC out door unit complete etc. as reqd.	2	Nos.	1,088	₹2,176
7Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.52 MB

Work Item Documents

BOQ_387643.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

tej Enterprises

L1₹4.0 LAdmitted-Finance

RAJA ELECTRICAL ENGINEERING WORKS

L2₹4.2 L+₹16,681.25 (4.16%)Admitted-Finance

15 119 DAKHINPURI NEW DELHI 110062 | SOUTH | DELHI | 110062

Anand Electricals

L3₹4.4 L+₹38,876.58 (9.70%)Admitted-Finance

0 DOGRA CHOWK JEWEL JAMMU JAMMU JAMMU KASHMIR 180011 | JAMMU | JAMMU AND KASHMIR | 180011

D K Gupta Electrical Works

L4₹4.8 L+₹76,919.09 (19.2%)Admitted-Finance

H 123 GYAN MANDIR ROAD GALI NO 3 JAITPUR EXTENSION BADARPUR NEW DELHI 110044 | NEW DELHI | SOUTH EAST DELHI | DELHI | 110044

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).
1.01	2.0 TR with 5 Star BEE Rating	2	Nos.	57,396	₹1,14,792
1.02	1.5 TR with 5 Star BEE Rating	1	No.	43,539	₹43,539
2Supplying , Installation, Testing and Commissioning of Window type Air conditioners complete with copper power cable upto 3 Mtr, wireless Remote, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing, cooling, dehumidification, air circulation, R-32/R-410A /R-407B Green Refrigerant with Scroll / rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P & labour etc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-I 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 0C. The system shall be able to operate up to 50 0C (out door ambient temperature).
2.01	1.5 TR with Inverter 5 Star BEE rating	2	Nos.	40,074	₹80,148
3	Supply , Installation, Testing and Commissioning of Automatic Line voltage correctors and wall mounted type for domestic use, copper wound complete with the voltmeter to indicate input voltage rating with auto cut off and time delay relay complete as required a) Capacity 5.0 KVA.	5	Nos.	3,488	₹17,440
4	Providing and fixing of refrigerant copper pipe of (5/8" & 1/4" size) suitable for 2 TR capacity split type AC unit i/c installation of refrigerant pipe with 1/2" thick (N.S) nylon insulation pipe covered with 50mm dia PVC flexible pipe etc. complete as required.	20	Mts.	1,151	₹23,020
5	Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.	5	Nos.	807	₹4,035
6	Providing and fixing MS angle iron frame made out of 35mm X 35mm X 5mm (N.S) of size 900mm X 300mm X 150mm(N.S) i/c painting suitable for mounting of 2.0 Ton capacity split AC out door unit complete etc. as reqd.	2	Nos.	1,088	₹2,176
7Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).

1.01

2.0 TR with 5 Star BEE Rating

Nos.

57,396

₹1,14,792

1.02

1.5 TR with 5 Star BEE Rating

No.

43,539

₹43,539

2Supplying , Installation, Testing and Commissioning of Window type Air conditioners complete with copper power cable upto 3 Mtr, wireless Remote, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing, cooling, dehumidification, air circulation, R-32/R-410A /R-407B Green Refrigerant with Scroll / rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P & labour etc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-I 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 0C. The system shall be able to operate up to 50 0C (out door ambient temperature).

2.01

1.5 TR with Inverter 5 Star BEE rating

Nos.

40,074

₹80,148

Supply , Installation, Testing and Commissioning of Automatic Line voltage correctors and wall mounted type for domestic use, copper wound complete with the voltmeter to indicate input voltage rating with auto cut off and time delay relay complete as required a) Capacity 5.0 KVA.

Nos.

3,488

₹17,440

Providing and fixing of refrigerant copper pipe of (5/8" & 1/4" size) suitable for 2 TR capacity split type AC unit i/c installation of refrigerant pipe with 1/2" thick (N.S) nylon insulation pipe covered with 50mm dia PVC flexible pipe etc. complete as required.

Mts.

1,151

₹23,020

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.

Nos.

807

₹4,035

Providing and fixing MS angle iron frame made out of 35mm X 35mm X 5mm (N.S) of size 900mm X 300mm X 150mm(N.S) i/c painting suitable for mounting of 2.0 Ton capacity split AC out door unit complete etc. as reqd.

Nos.

1,088

₹2,176

7Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).