Repairing work of left side hall of 1st and 2nd floor of CTO Building for accommodation of staff of Term Cell Jharkhand Circle Ranchi

Amount

SH: WOOD WORK

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to steel windows by welding

SH: STEEL WORK

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

SH: FINISING

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:

Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

One or more coats on old work

SH: REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

SH: DISMANTLING & DEMOLISHING

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

SH: SANITARY INSTALLATION

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

15 mm nominal bore

SH: WATER SUPPLY

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour .

15 mm nominal bore, 107 mm long, weighing not less than 110 gms

SH: MISCE WORK

Removing wall paper from wall surface of 1st & 2nd floor of CTO Building as per direction and satisfaction of Engineer-in-charge.

Cleaning of toilet (W C pan, urinal, wash basin, walls etc) with Harpic, detergent, brush, brooms etc. and disinfecting the same as per direction and satisfaction of Engineer-in-charge.

Providing services for repair of cub-board and cleaning of fixed glass in windows after removing and fixing the same after cleaning etc. All T & P has to be arranged by the contractor. Consumable material like fittings etc will be paid separately.

Carpenter 1st class

Beldar

Providing and fixing wall paper of approved quality to close the open space in false ceiling as per direction and satisfaction of Engineer-in-charge.

Easing and adjusting steel windows by cutting and welding etc. With full satisfaction of Engineer-in-charge.

Providing and fixing BWP Grade plywood of Greenply (Gold) or equivalent make for furniture, modesty panel for counters / cup board shutters including necessary nails and adhesive etc. complete as per drawing supplied by the department and as directed by Engineer in charge.

9 mm thick

6 mm thick

Providing and fixing screen classic 3% roller blind of D-décor / Vista make of approved quality and colour as per direction and satisfaction of Engineer-in-charge.

DINESH KUMAR SINGH