Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹47.2 L+₹4.1 L (9.57%)Rejected-Finance N A | NA | NA | 121004 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹48.7 L+₹5.6 L (12.9%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest |
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
15 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
SPL REPAIR TO ATTACHED TOILETS (24 NOs GIRL BARRACK), APPROACH SEWAGE LINE (BOYS BLDG NO P-01 TO P-11 AND 24 GIRL BARRACK) DGNCC CAMP AND 3 NOS MINOR WORK AT BLDG NO P-21B, P-21A URBAN VILLAGE AND P-19 MALL ROAD UNDER GE (EAST) DELHI CANTT-10
2022_MES_546184_1
GE/DE/37/2022-23
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹96,600
Yes
7 Oct 2022
18 Aug 2022
17 Sept 2022
18 Aug 2022
15 Sept 2022
1 Sept 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.
S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.
S & F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.
S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.
S & F Aluminium alloy powder coated standard hollow section for ventilator as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.
S & F 125mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.
S & F 100mm size stainless steel butt hinges to PVC frames with reqd nos of screws complete all as specified and as directed.
S & F Aluminum Anodised 150mm size barrel tower bolt with complete all as specified and as directed.
S & F 150mm size aluminum adodised handles complete all as specified and as directed.
S & F 150mm size Mild steel oval shape handles complete all as specified and as directed.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
Taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.
M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed.
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing tiles of any type complete all as specified and as directed.
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)
S & F in repairs cast copper alloy Chromium plated Angle valve 15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)
S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in repairs 75mm dia brass chromium plated shower rose with neck and swivel joints fancy type with shower arm of 450mm long suitable for 15mm bore GI pipe all as specified and directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.(Make: Jaquar/Marc/Kohler)
S & F in repairs 20mm dia Chromium plated towel rail 60cm long fixed to wall including all fittings for fixing complete all as specified and directed.
S & F in repairs 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.
S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.
S & F Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with 32mm dia CP waste fitting, fixed in repair, complete all as specified and as directed. (Make: Cera/Parryware/Hindware)
S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe, antisyphonage pipe including trap set in, and including concrete etc complete including making good to floor all as specified and dirtected. (Make: Cera/Parryware/Hindware)
S & F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed
S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S & F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete.
M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.
M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.
M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M & L for RCC M25 Nominal Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 25mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F in repairs 100mm dia Cast iron soil (Sand cast), waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.
S & F in repairs 100mm dia Cast iro Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S & F in repairs 100mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
S & F in repairs 100mm dia cast iron cowls complete all as specified and as directed.
S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down, eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, complete all as specified and directed.
S & F in repairs 110mm bore PVC (SWR) bends any radius complete
S & F in repairs 100mm dia Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
M & L 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .
M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.
M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1mm thick wall care putty over new surfaces complete all as specified and as directed.
M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings over 1mm thick Birla White/J K White wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper over a coat of primer ,complete all as specified and directed.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
Taking out exisitng roof treatment with any type of membrane, wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out grass roots/vegetation etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped and drying the cleaned surface for further treatment, complete all as specified and as directed.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement including a mix of water proofing compound @ 200ml/50Kg Cement Bag (Smartcare vitalia of Asian Paint product or equivalent of Berger and Nerolac), complete all as specified and as directed. (Note : Cost of water proofing compound shall deemed to include in the quoted rate).
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. (Notes: The work shall be executed through authorised applicator of manufacturer only). (Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer).
M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, etc., and similar type of works including weathering, slightly rounded or chamfered angles, including demolition of existing PCC of any type complete all as specified and as directed.
Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.
Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.
Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.
M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.
Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.
M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.
M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.
M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed.
S & F factory made Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing manhole covers complete all as specified and as directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor.
M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid over and incl 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding/path including demolition/dismantling of existing tiles of any type complete all as specified and as directed.
M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and incl 15mm thick screed bed in CM 1:6 including demolition of existing flooring or tiles of any type and size complete all as specified and as directed (Note: Colour of chequered tiles shallbe approved by Engr-in-Charge or by GE as per site requirement).
S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm (Double rebated) for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc
S & F for flush shutters 40 mm thick solid core constructions with block boardcore , ply wood face panels commercial type on both side complete all as specified and as directed.
S & F 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. devided into squres with sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S & F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary iron flats of suitable sizes with welding and including dismantling of old wire cloth complete all as specified and directed.
M & L for preparation of new wooden surfaces & applying 2 coats of synthetic enemel paint over a coat of wood primer complete all as specified.
M & L Vetrified tiles (square/ rectangular) of size 600 x 600 x 10 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including cement screed bed 15mm thick in cement mortar 1:6, after scarifying the existing surface complete all as specified and directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x450x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).
S & F in repairs Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed.
S & F in repairs Sinks with drainage board made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx 160mm all as specified and directed.
S & F in repairs Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction complete all as specified and directed.
Water proofing treatment comprising of the following, using APP membrane polymer based to ptrpared roof surface complete all as specified and as directed:- (a) Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. (b) Applying APP based polymeric membrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (c) Over the APP membrane after laying apply a coat of solar reflective aluminum paint @ 0.15Kg/Sqm.
S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
Fabrication & fixing of Modular wardrobe/ cupboard made out of 18-20 mm thick WPC boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ drawers etc. complete all as specified and as directed. (Design and pattern as approved by GE). (Make : Rajshree or equivalent)
S & F for 18-20mm thick WPC boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected. (Make : Rajshree or equivalent)
S & F for Continuous piano type hinges, stainless steel with width of flaps 30mm, complete all as specified and as directed.
S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.
S & F 50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.
S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed.
S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed
Stainless Steel (SS-304) perforated Cutlary basket (6161/6160) product code made of min 4mm dia stainless steel wire and bottom of S S perforated sheet (sheet grade 304) approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godreg Cat Part No 6132 or IPSA/ Hettich as approved by Engr-in-Charge.
Stainless Steel basket (plain) of product code (6120/6121) made of min 4mm dia stainless steel wire (sheet grade 304) approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godreg Cat Part No 6121 or IPSA/ Hettich as approved by Engr-in-Charge.
Supply only Stainless steel bottle full out of size 500mm x 400mm x 160mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.
S & F full pedestal pattern wash hand basin, size of basin 630x510 mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting taking down existing wash hand basin of any type and size complete all as specified and as directed.
M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete all as specified and directed.
M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed.
All as per item No 42 above but bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.
M & L for RCC 1:1.5:3 Nominal Mix using 20mm graded agg as in footings, plinth beam and bases of columns complete all as specified and as directed.
M & L for RCC 1:1.5:3 Nominal Mix using 20mm graded agg as in columns , piers posts and struts complete all as specified and as directed.
S & F for Mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed
S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed
S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (Curved shape) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) complete all as specified and as directed.
M & L for rubber moulded glossy finished Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 80 mm thick, M-40 Grade, laid over and incl 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding complete all as specified and as directed.
S & F for 1st class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S & F for Factory made 35mm thick 1st class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
Preparation of new wooden surface and applying polish for a glossy finish over 10cm width or girth, complete all as specified and as directed.
S & F 150mm size brass butt hinges complete all as specified.
S & F 150 mm long brass barrel tower bolt, fixed complete all as specified and directed.
S&F 300 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified.
S & F 150 mm long brass handle oval type, complete all as specified and as directed.
S & F 35mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. devided into squres with sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
Taking down carefully old unserviceable copper/aluminium point wiring From PVC existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed ISI marked of size 20 mm dia medium grade and fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl MS box and 3mm thick plastic laminated sheet of suitable sizes for mounting switches/ sockets/ fan regulator etc, and making good surface as original complete all as directed for the following :-
One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.
One socket outlet point 5 amps on the same board.
S & F for switch piano, flush type single pole, one way 5 Amp complete all as directed.
S & F for of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.
M&L of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.
Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.
Supply and fixing in replacement of LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.
M&L in replacement Plastic body ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.
Vipul Construction
garnet engineers contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .