Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.2 LAdmitted-Finance | ₹10.2 L | L1 | Admitted-Finance |
| 2 | L2₹10.4 L+₹22,169.34 (2.18%)Admitted-Finance | ₹10.4 L+₹22,169.34 (2.18%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Md Shahadat Hussain L2 | MS POPY CONSTRUCTION L1 |
|---|---|---|---|---|---|
| 1.00Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 1.10 | Hot finished welded type tubes | 1,513.16 | KG | 159 ₹2,40,592.44 | 150 ₹2,26,974 Lowest |
| 2.00GYPSUM CEILING | |||||
| 2.1012.45 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm cic, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | |||||
| 2.20 | 12.5 mm thick tapered edge gypsum plain board conforming
to IS: 2095- (Part |) :2011 (Board with BIS certification marks) | 40.11 | Sq.M. | 1,100 ₹44,121 Lowest | 1,140 ₹45,725.4 |
| 3.00Providing and fixing factory made uPVC white colour fixed glazed Partition wall/windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. | |||||
| 3.10 | Partition walls/Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area upto 0.75 sqm.) | 2.7 | sqm | 6,500 ₹17,550 Lowest | 6,530 ₹17,631 |
| 4.00 | Providing & fixing Acoustical sound reducing Doors: The acoustic wooden door is made up of an acoustic sandwich panel core, hardwood or marine plywood structure with stripping in the recesses and on the bottom, surfaced on both sides with 1mm thick laminate / desired veneer over MDF board. The door to be fabricated with 12mm thick commercial ply (Green/so near or equivalent make) veneer facing and finished with varnish on both sides. wooden framework filled with Insulation wool with one layer of 75mm thick. 24.Kg.Cu.M density insulation wool. The insulation should be supported with wooden batten of Teakwood framework minimum 610mm x 610mm to avoid sagging. The door leaf will be fabricated using 90mm X 70mm thick. Teakwood frame. The door will have a hydraulic door closer, door handle and relevant hardware for fabrication and fixing. Complete with the requisite door frame and magnetic and rubberized door seals all around of the door frame or as per specification, drawing, and as per the instructions of Engineer-in-Charge. The doors on the auditorium side to be finished using non-light reflective media. Work complete in all respects to the satisfaction of the Department | 10.98 | Sq.M. | 23,200 ₹2,54,736 | 23,100 ₹2,53,638 Lowest |
| 5.00 | Providing and laying loop pile plain carpet rolls made of solution dyed polypropylene fibre. The carpet shall have a loop pile construction with a gauge of 1/10 .The primary backing shall be woven polypropylene and the secondary backing shall be action back, ensuring dimensional stability and durability. The carpet shall have permanent anti-static properties and must comply with flammability standards by passing the Pill Test | 272.77 | Sq.M. | 1,050 ₹2,86,404.3 | 1,000 ₹2,72,766 Lowest |
| 6.00Providing, fitting in position Office Desk made of 19 mm BWR grade Ply panel on frame made of BWR grade ply board, Top of the Table finished with Hanex 6mm S008 N white (Merino make) and other exposed surfaces finished with High Gloss Decorative laminate sheet confirming to IS 2046, fitted with all necessary fittings & accessories complete in all respect as Architect’s design & specification. | |||||
Tender Value
₹10.5 L
EMD Value
₹24,788
Closing Date
15 Oct 2025, 5:00 pmClosed
OIC Engg Dept for and on behalf of Director BBCI
Engineering Department, OPD building 2nd floor, Dr BBCI
Renovation and upgradation of BBCI Auditorium at 2nd floor OPD Building of Dr B Borooah Cancer Institute Guwahati 16
2025_TMC_878824_1
BBCI Auditorium Renovation works
Open Tender
Civil Works - Buildings
Item Rate
60 days
Dr B Borooah Cancer Institute
As per tender
5 documents required · 5 mandatory
₹0
₹24,788
Dr B Borooah Cancer Institute
24 Oct 2025
30 Sept 2025
17 Oct 2025
30 Sept 2025
15 Oct 2025
7 Oct 2025
30 Sept 2025 - 4 Oct 2025
6 Oct 2025
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .