ADDN ALTN TO CONF ROOM, PASSAGE AND INTERNAL WIRING WITH ALLIED ITEMS AT BLDG NO P-85 OF HQ CECC AND OTHER SANCTIONED WORKS OF AGE BR-I UNDER GE (EAST) LUCKNOW

Amount

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard complete all as specified and directed.

Taking down cement plaster on brick walls / ceiling including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified and directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4.00 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm ,complete all as specified and directed.

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey and cutting holes for hold fasts & making good complete all as specified & directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/ Rectangular) area of each tiles exc 0.18 sqm but n exc 0.36 Sqm in floor including screed bed 15mm thick or bedding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 300x600 x7 to 8mm thick/300x450x7 to 8 mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick rendering in cement & sand mortar 1:4 complete all as specified and directed.

S&F 2nd class hardwood (SAL), plain, solid, straight chowkats and frames of , wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

S&F, 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood, plain framed panelled shutter(two panel) with lock rail and panel of 9mm BWP commercially ply or 12mm veneered patical board with comercial vineering on both faces.The size of rail and as per IS 1003(Part1),kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick door shutter made with 20mm thick plywood grade BWR type BB both sides covered with 6mm thick veneered decorative plywood, grade 1 (with BWR resin) on one faces, fixed with screws/ adhesive with 1.5 mm thick decorative laminate type-1 both sides of surface finish, colour and pattern as approved incl beading necessary adhesive, brass mortice lock to timber frame work, complete all as specified and directed.

S&F powder coated aluminium window glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings and glazing with 5mm thick plain sheet glass complete all as specified and directed.

S&F powder coated aluminium grill (opening of gril not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed.

S&F powder coated aluminium frame/chowkat of aluminium door section of 100x44x1.60 to1.8 mm thick fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed. Make Jindal/Hindalco

Providing and fixing powder coated aluminium partly glazesd and partly paneled door shutter side hung type using 1.50mm thick standered door section having size of styles, top rails 83x44mm x 1.6 to 1.8mm thick where as bottom rails will be made up of 100x44mm including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancy type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass and pannelling shall be provided with 12mm thick exterior grade prelaiminated partical board with both side choice laminations, complete all as specified & directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Refixing of shutters in same opening of size exc. 1.00 sqm but not exc. 2.00 sqm complete all as specified and directed.

S&F vitrified ceramic tiles dark shade 8-10 mm thick (Square/rectangular) polished, area of each tiles exc.1.28 Sqm but not exc. 2.88 Sqm in floor etc and over 20 mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white /coloured cement to match complete all as specified and directed.

S&F vitrified ceramic tiles dark shade 8-10 mm thick (Square/rectangular) polished, area of each tiles exc.0.42 Sqm but not exc.1.00 Sqm in floor etc over and including 20 mm thick screed bed in cm 1:4, set and jointed in neat cement slurry and pointed in white /coloured cement to match complete all as specified and directed.

S&F ACP cladding 3mm thick (overall) with top sheet 0.25mm thick as in wall/ceiling with superior finish, colour and pattern as aproved by GE incliding aluminium framing making grid of size 600mm X 600 mm with aluminium member of size 40mm X 20mm X 1.5mm thick with all fixing arrangement complete all as specified and directed.

M&L for 12 mm thick plywood grade BWR type BB, fixed with screw to timber frame work block board grade 2 quality interior grade having both sides commercial faces fixed with screws to timber frame work complete all as specified and directed.

M&L for 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with resin/screwds to timber frame work, complete all as specified & directed.

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, fixed with screws, sectional area exc 13 sqcm and not exc 25 sqcm . complete all as specified & directed.

M&L for applying two coat of melamine wood polish on new wooden surface including preparation and applying sealer/filler etc to have smooth and glossy finish surface complete all as specified & directed.

M&L for 1st class hard wood beading sectional area not exc 6 sqcm fixing with nails complete all as specified and directed.

M&L for 1st class hard wood moulding as in cornices, sectional area exc 6 sqcm but not exc 13 sqcm, fixing with nails complete all as specified and directed.

M&L for applying two coats of plastic emulsion paint old surfaces in ceiling complete all as specified and directed.

M&L for 20mm thick granite stone work any type machine cut and polished wall cladding/dado and like laid over screed backing of CM 1:4 and jointed with grey cement slurry and pointed with white granite stone incl grinding and polishing complete all as specified and directed.

S&F butt hinges of size 100 mm medium weight, cold rolled mild steel ISI marked complete all as specified and directed.

S&F 150 mm size Stainless Steel handles, fabricated type, extruded section complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for stainless steel handles of size 150mm polished bright and smooth surface free from any defects,complete all as specified and directed.

S&F for stainless steel barrel type tower bolt of size 200 mm polished bright and smooth surface free from any defects conforming to IS 15833:2009,complete all as specified and directed.

S&F for clip type sliding door bolt of stainless steel size 300 mm polished bright and smooth surface free from any defects conforming to IS 15834:2009,complete all as specified and directed.

S&F 150 mm size brass handles cast type polished bright ,complete all as specified and directed.

M&L for brass sliding door bolt with cast or sheet of length 300 mm with hasp, staple (bolt type) and fixing bolts with rolled or drawn brass bolt complete all as specified and directed.

M&L for brass tower bolt with sand or die with cast or sheet of length 200 mm with hasp, staple (bolt type) and fixing bolts with rolled or drawn brass bolt complete all as specified and directed.

S&F curtain rods, coloured, standrad quality,stainless steel not less than 25mm dia with heads at both ends and middle support, rings etc. complete all as specified and directed.

Dismantling ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified and directed.

S&F GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled webof 50mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediatechannel at457mm centre to centre and hangers6mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means ofceiling cleats made out of GI flat40 x 3mm size 60min long complete all as specified including 10mm thick POP (Gypsum anhydrous) to flat surface over metal frame work and reinforced with GI wire mesh, at different height or level, to provide seamless finish complete all as specified and directed

S&F power coated (min 50 micron coating) aluminium section as in door/partition fully glazed/gauzed/panelled incl shutters and panels with one or more rebate & jointing cleat of fixing etc including handle, tower bolts, hinges, rubber gasket & all necessary accesories complete all as specified and directed.

S&F 12 mm thick toughened glass cabin with corner/middle entry door including necessary hinges/hardware of chrome finish incl 2/3 portion of glass etched/frosted as per manufacturer instruction and complete all as specified and directed.

S&F plain sheet glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares not exc 0.5 sqm in each pane complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed and specified.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick rendering with CM 1:4 and jointed with complete all as specified and directed.

M&L for Bees-wax polishing on kota stone surfaces any width or girth including cleaning and preparing the previosly polished old surface complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on brick or concrete surfaces on wall and finished surface even and smooth witout using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surfaces on wall and finished surface even and smooth witout using extra cement complete all as specified and directed

M&L for preparation of untreated wooden surface of any description, not other wise described over 10 cm width or girth, applying two coat of synthetic enamel paint on newly prepared surfaces over a coat of pink primer,complete all as specified and directed.

M&L for applying two coats of plastic emulsion paint over a coat of primer on new / old plastered surface of wall including preparation of surfaces,complete all as specified and directed

M&L preparation of newl/old surface of ceiling and applying two coats of plastic emulsion paint over 1.5 mm thick wall care putty ,complete all as specified and directed.

Cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus wastage from site complete all as specified and directed.

M&L for exterior finish coloured tiles of size 300 mm x 300 mm x10mm thick ,heavy duty factory made, set jointed and pointed in neat cement slurry as in floors with grey cement and pigemetns laid over and incl 20 mm thick screed bed in CM 1:4 finsihed even and fair to receive tiles complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in PCC Kerb complete including weathering slightly rounded or chamfered complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even without using extra cement, complete, all as specified & directed.

M&L for 75 mm thick PCC 1:3:6 typeC2 using 40mm graded stone aggregate as in sub base/ plinth protection,finished even and smooth without using extra complete all as specified and directed.

M&L for 18 mm to 20mm thick green (Udaypur) colour marble work any type ( machine cut /table rubbed and polished) as in treads ding/dado and likein CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shed , complete all as specified and directed.

M&L for 18 mm to 20mm thick Yellow (Jaisalmer ) colour marble work any type ( machine cut /table rubbed and polished) as in resers of staircase,verical wall cladding and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shed , complete all as specified and directed.

M&L for brick work with using sub class `B 'old sie bricks straight or curved on plan exceeding 6.0mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for 100 to 150mm wide POP moulds/ cornices in required pattern/ design as in ceiling/ wall complete all as specified and directed.

M&L for complete removal of existing surface treatment and applying POP wall punning ,shining smooth surface ,complete all specified and directed.

S&F ceiling composite paper decorative /kraft type having water proof ,tamper proof and durable caating properties, width not less than 1.2 m incl nessary fixtures and adhesive for pasting below POP fale ceiling,complete all specified and directed.

S&F CP Brass /stainless steel/cast brass letter or figure not less than 2.5 mm thick (Block,Roman ,italic or indian ) hight between 250mm to 300 mm of suitable width, fixed on any type of surface with eraldite or any other equivalent adhesive complete all as specified and directed.

Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single core aluminium conductor cable of size upto 16 Sqmm on wooden batten/PVC conduits, complete with battens/conduits and remove from site and make good disturbed surfaces of wall complete all as specified and directed.

Disconnecting/dismantling of old existing unserviceable DB's any way 240 Volts with their unserviceable burnt MCB's/Isolators complete all as specified and directed.

S&F in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed. Make- Legrand /ABB/Havells

S&F in repair MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wal lcomplete all as specified and directed. Make- Legrand /Havells/ABB

S&F in replacement MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed. Make- Legrand /Havells/ABB

S&F in repair MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as specified and directed. Make- Legrand /Havells/ABB

S&F in repair MCB 100 Amps, TPN, 415 volts , breaking capacity 10KA complete all as specified and directed. Make- Legrand /Havells/ABB

S&F DLP Plastic trunking 150 mm& 50 mm size for cable tray riser to DB and DB to sub DB for sub main wiring including making good to disturbed wall surfaces complete all as specified and directed. Make: Legrand Cat No 010432 or equivalent as approved by GE.

S&F DLP plastic flexible cover 85 mm width for trunking complete all as specified and directed. Make: Legrand Cat No 010522 or equivalent as approved by GE.

S&F DLP plastic adjustable internal angle 80 degree to 100 degree for trunking complete all as specified and directed. Make: Legrand Cat No 010602 or equivalent as approved by GE.

S&F DLP plastic adjustable external angle 60 degree to 120 degree for trunking complete all as specified and directed. Make: Legrand Cat No 010622 or equivalent as approved by GE.

S&F DLP plastic end caps for trunking complete all as specified and directed. Make: Legrand Cat No 010702 or equivalent as approved by GE.

S&F DLP plastic flat junction for trunking complete all as specified and directed. Make: Legrand Cat No 010732 or equivalent as approved by GE.

S&F DLP plastic flat angle for trunking complete all as specified and directed. Make: Legrand Cat No 010804 or equivalent as approved by GE.

S&F DLP plastic clips for trunking complete all as specified and directed. Make: Legrand Cat No 010682 or equivalent as approved by GE.

S&F DLP plastic cover joint for trunking complete all as specified and directed. Make: Legrand Cat No 010802 or equivalent as approved by GE.

S&F DLP plastic base joint for trunking complete all as specified and directed. Make: Legrand Cat No 010691 or equivalent as approved by GE.

S&F DLP Plastic trunking 80 mm& 50 mm size for cable tray riser to DB and DB to sub DB for sub main wiring including making good to disturbed wall surfaces complete all as sepcified and directed. Note: Accessories such as elbow , bend tee , socket,junctions and flexible cover will be measured and paid seperatly complete all as specified and directed. Make Legrand Cat No 010412 or equivalent as approved by GE.

S&F DLP plastic fexible cover 65 mm width for trunking complete all as specified and directed. Make: Legrand, Cat No 010521 or equivalent as approved by GE.

S&F DLP plastic flat angle for trunking complete all as specified and directed. Make: Legrand, Cat No 010802 or equivalent as approved by GE.

S&F DLP plastic cover Joint for trunking complete all as specified and directed. Make: Legrand, Cat No 010801 or equivalent as approved by GE.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of modular inner plates of thickness 1.6mm thick terminal boxes concealed on wall/fllor/ceiling, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash complete all as specified and directed.

S&F switch piano flush type 5 Amp one way, single pole, 240 volts complete all as specified and directed.

S&F in repair LED tube light along with fixture including one number of 20 watt 4' LED tube complete all as specified and directed. Make-CG Cat part No-LCTLN-20-CDL or equivalent Model of Havells/Philips.

S&F sub main wiring in existing conduit for main DBs to Sub DBs with PVC insulated & unshaethed four runs of 16 sqmm single core multistrand copper conductor cable, 1100 Volts grade alongwith two run of 16 sqmm PVC insulated & unshaethed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuity conductor, Note : (a) six runs of 16 sqmm cable shall be constitute one unit. Make of cable: Havells/ polycab/RR Cable

S&F sub main wiring in existing conduit for main DBs to Sub DBs with PVC insulated & unshaethed two runs of 10 sqmm single core multistrand copper conductor cable, 1100 Volts grade alongwith one run of 10 sqmm PVC insulated & unshaethed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuity conductor, . Note : (a) three runs of 10 sqmm cable shall be constitute one unit. Make of cable: Havells/ polycab/RR Cable

S&F sub main wiring in existing conduit for main DBs to Sub DBs with PVC insulated & unshaethed two runs of 6 sqmm single core multistrand copper conductor cable, 1100 Volts grade alongwith one run of 6 sqmm PVC insulated & unshaethed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuity conductor, complete all as specified and directed. Note : (a) Three runs of 6 sqmm cable shall be constitute one unit. Make of cable: Havells/ polycab/RR Cable

S&F PVC casing & caping ISI marked of size 20mm complete all as specified and directed.

S&F PVC casing & caping ISI marked of size 25mm complete all as specified and directed.

S&F flexible conduit of size 20mm ISI marked complete all as specified and directed.

S&F flexible conduit of size 25 mm ISI marked complete all as specified and directed.

S&F ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified and directed. Make-SSK /Anchor/ Havells

S&F wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified and directed. Make : Havells Model-D'zire or equivalent Model of CG/Khaitan.

S&F exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 900 RPM including suitable louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and directed. Make:- Havells model No- Turbo force SP or equivalent Model of orient/CG.

S&F exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 450 mm sweep 900 RPM including suitable louvers and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed. Make:- Havells model No- Turbo force SP or equivalent Model of orient/CG.

Cutting walls any typefor making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.

S&F LED focus light 4/5 Watt with the required electrical wiring complete all as specified and directed. Make:- Havells/CG/Philips.

S&F LED strip light with the required electrical wiring complete all as specified and directed. Make:- Havells/CG/Philips.

S&F LED ceiling light 2X2 feet abstract shapes slim width of the tile seamlessly blend in with the ceiling space with geometric and aligned desine in the symetric and abstract way with the required electrical wiring complete all as specified and directed.Make- CG cat pat No- LCTLRF4-36-CDL or equivalent model of Havells/ Philips.

suniltraders