C/o New Forest Guard hut at Janahan

Amount

cutting in Earth work and disposal of excavated earth upto a lead of 20 meters:- Levelling The Plot

Excavtion in foudation, trenches etc, in earth work, lift upto 1.50 Meters stacking the eacavated soil not more then 3 meters clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers,when required in to plinth sides of foundations etc., consolidating each deposited layer by ramming and watering and then diposing of all surplus excavated earth as directed with in a lead of 20 meters

Rcc work 1:1.5:3 complete curing but excluding cost of form work and reinforcement

providing from work of ordinary timber plan - king so as to give finish i/c centering & shutering strutting and propping and cement bellow supporting floor to colling not exceeding 4mtrs. And remooval of tha same for in -beams.centilevers, lintels etc.not exceeding 1mtrs. in denth

Stone soling properly hand-packed filling interstices with spalls and consolidating with power road roller to the requested gradiant and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour)

Providing and laying cement concrete 1:5:10 (1 cement:5 sand : 10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand)

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement.50mm thick

Providing from work of ordinary timber plankings so as to give a rough finish including centring,shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceililng not exceeding 4 metres and removal of the same for insitu reinforced concrete and plain concrete work in:Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters,buttresses,plinth and string courses and the like. vertical surface etc.Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters,buttresses,plinth and string courses and the like.

kitchen cooking shelves ex/c sink

Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses,plinth and string courses etc. suspended floor roof landing

suspended floor roof landing etc kitchen cooking shelves ex/c sink

Providing mild steel tor steel etc . For rcc work including bending binding and placing in position complete etc.

Brick masonry using common burent clay building bricks in cement mortar 1:6(1cement :6 sand ). 2nd class bricks.

Half brick masonry usinbg common burent clay building bricks in cement mortar 1:4(1 cement :4 sand) 2nd class bricks

Providing wood work in frames of false celling partitions etc. sawn and put-up in position 2nd class deodar wood

Providing and fixing wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) 1st class deodar wood. 20 mm thick

Providing and fixing plain lining with tongued and groved jointing and screws (frame work and cover fillets to be measured and paid for separately with.1st class deodar wood.12mm thick

Providing eaves board 200mmx25mm thick including fixing in position.1st class deodar wood.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing valleys 90 cm over all in plain G.I. sheets fixed with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.80 mm thick sheet.

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position. 1st class Deodar wood

Providing and fixing panellewd glazed panelled or glazed shutter for door and window cleastorey window etc.2nd class d/wood

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws .S FLAT/BAR ANGLE /SQURE IRON AND ROUND M.S Pipe @ 12kg/m2

Proviiding and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. 300x16mm

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 250x10

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc.125mm

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:5 cement 5 sand.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.

Providing and laying Duro stone vetrified tiles (600x600mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.Readymixed paint brushing with Readymixed paint brushing wood primer pink

Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matte sand papering and stopping:-Readymixed paint other then white

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour two coats

Excavation in soil in hilly area by manual means including cutting and trimming of side slope and disposing of excavated earth with in all leads and lifts as per drawing and technical specification clause 1603.1 with in all leads and lift as per the diraction of engineer in charg.

Earth work in excavation for structure as per drawing & technical specification clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deleterious material and disposal upto a lead of 50 m dressing of sides and bottom and back filling in trenches with suitable material including all leads and lifts or as per the direction of Engineer - in Charge ( ordinary soil )

Providing and laying concrete for plain / reinforced concrete in open foundations complete as per drawing & technical specification clause 802 , 803 , 1202 and 1203 . (1:4:8:)

Add 7.5% wood carriage $ convertion on 1114206

Add 15% Electricity, water supply and sanitary on 1048184

Sandeep Thakur

SUNIL KUMAR VERMA

MUKESH KUMAR

SHALENDER CHANDEL

Brij Lal Bhardwaj

Kuldeep Bhandari