REPAIR OF TOILET FLOORING, TRAPS AND CONNECTING FITTINGS IN BILLETS AND OTHER AREA UNDER GE (AF) SRINAGAR

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-In-Charge.

M&L Coloured Glazed ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed by Engineer-In-Charge.

M&L Coloured Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed by Engineer-In-Charge.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed by Engineer-In-Charge.

Taking up or down steel tubing & connections 15mm bore pipe incl cleaning for refixing or removal from site complete all as specified and directed.

Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed.

Refixing of old steel tubing and connection in new or old position of 15mm bore. complete all as specified and directed.

S&F GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors 15mm bore complete all as specified and directed.

Refixing old GI tubing and connections, 20 mm dia, in old or new position. (Walls, ceiling, floors, etc.) completed all as specified and directed.

M & L tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S & F in repair CP grating doom 100mm dia size complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

M & L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

S & F in repairs 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including trap set complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm aps, waste, chain and plug and porcelain stopper but including brackets, waste coupling and waste pipe.

S & F in repairs Stainless Steel Soap dish, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.

SS&F in repair PVC waste pipe flexible for urinal complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Waste coupling of CP (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms for WHB/Urinal complete all as specified.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs,bedding urinal agaist wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws complete all as specified and directed by Engineer-In-Charge.

S & F in repair Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-In-Charge.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete all as specified and directed by Engineer-In-Charge.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete all as specified and directed by Engineer-In-Charge.

S & F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-In-Charge.

Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed by Engineer-In-Charge.

M&L RCC 1: 1.5 :3 type A-1 (using crushed stone aggregate)as in chajjas / cooking shelves/platform etc. and the like including 5mm thick rendering in cm 1:3 finished even and smooth without using extra cement to the surface in contact with form surface complete all as specified and as directed by Engineer-in-Charge (The rate quoted by the contractor shall included for form work.) complete all as specified and directed by Engineer-In-Charge.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-In-Charge.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges, complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed.

S & F in repairs 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-In-Charge.

S&F in repair sinks board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-In-Charge.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-In-Charge.

M&L for 75mm thick cement concrete1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer finished even and smooth without using extra cement complete all as specified and directed by Engineer-In-Charge.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc including removal of rubbish out of defence land complete all as specified and as directed by Engineer-in-Charge.

Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1: 6, using old size bricks complete all as specified and as directed by Engineer-in-Charge.

Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by the Engineer-In-Charge. (The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork upto triple storey bldg).

M & L for rendering 15 mm thick on other than fair faces of brick wall finished fair & even in CM 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall finished fair & even in CM 1:4 complete all as specified and directed.

M & L for rendering 5 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying two coats of OBD over a coat of putty filling including preparation of surfaces on walls as specified and directed .

M & L preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L Preparing of new surface of wall and applying two coats of cement based paint over one coat of primer complete all as specified and directed by Engineer-In-Charge.

S & F in repair Drapery rod with bracket & PVC finols, fancy type made of MS tube 20 mm dia having PVC powder coated covering of colour as approved by GE, as in curtain rods including taking down the old unserviceable pelmet box/curtains rods complete all as specified and directed by Engineer-In-Charge.

S & F in repair 100 mm size hasp and staple, stainless steel including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in Kitchen drawers/cupboard and pelmet etc complete all as specified and directed by Engineer-In-Charge.

Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sqm and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all as directed by EIC.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge .

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm complete all as specified.

S & F Pressed steel frames of 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including providing, cement concrete Type C-1, 1:3:6 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges for filling in pressed steel frames complete, as specified.

S & F Pressed steel frames of 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including providing, cement concrete Type C-1, 1:3:6 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges for filling in pressed steel frames complete, as specified.

Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004 complete all as specified and directed by Engineer-In-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S & F second class hardwood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified.

S & F second class hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-In-Charge.

S & F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-In-Charge.

S&F 1 st class hardwood small fittings such as brackets of any type,latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 cucm each including 50 mm butt hinge complete all as specified and directed by Engineer-In-Charge.

Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-In-Charge.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-In-Charge.

All as per item above here-in-before but with out Glazing bars

S & F Steel windows or ventilators, fixed type, with glazing bars

S &F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-In-Charge.

M&L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-In-Charge.

S & F Sheet glass of ordinary quantity 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-In-Charge.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-In-Charge.

S & F Sheet glass of ordinary quantity 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or bricks surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-In-Charge.

S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-In-Charge.

S & F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-In-Charge.

S&F 100 mm size butt hinges, Stainless Steel complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed by Engineer-In-Charge.

S&F 150 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-In-Charge.

S & F Floor door stopper of aluminium alloy body 140mm cover plate and tounge, anodised with hard-drawn steel spring fixed in floor complete all as specified and directed by Engineer-In-Charge.

S & F in repairs 300 mm long mild steel ordinary rat tail rod pattern, door spring including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified and as directed by Engineer-in-Charge

S & F in repair 6mm thick Asbestos cement plain building boards, fixed to timber framework with screws as in ceiling complete all as specified and directed by Engineer-In-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge

S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed by Engineer-In-Charge.

All as per item No 90 but except Sheets

S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engineer-In-Charge.

M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

M & L for Welding in repairs exc 2.5cm but n.exc 5 cm in length thickness of metal to welded n.exc 6mm complete all as specified and directed by Engineer-In-Charge.

S & F for Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe- 290 Gde-E-165 complete all as specified and directed by Engineer-In-Charge.

S & F in repairs 4mm dia Plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. including straining and fixing to wood, concrete orsteel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire tobe measured) Complete all as specified and as directed by the Engr-in-Charge.

M/S Abdul Ahad Rather

M/S M.R. Construction

NAJAR ENTERPRISES

M/S Haji Zahoor Hussain Ganai

M/S maqsood enterprises

M/S FAROOQ AND SONS

M/S SUHEEL CONSTRUCTIONS

M/S GULZAR ENTERPRISES

M/S Wani and Sons

M/S TARIQ AHMAD SHEIKH