Various Electro-Mechanical Works to be carried out at Govt. 500 Bedded Paediatric Hospital, Bemina, Srinagar.

Amount

Fabrication and installation of 990 ltr capacity additional day oil tank complete with man hole cover, gauge glass, necessary connections as per technical Specifications of Annexue B.

Fabricaion of base frame for mounting day oil tank in steel structure

Providing and fixing of cladding with Aluminimum sheet of 26 guage thickness on 20mm MS pipes (loops inside the building). The cladding shall be properly riveted and all joints of adjoining section shall be staggered in relation to each other. Note:-Nitrile insulation of 9mm thickness has already been done on these pipes.

Relocation of underground central heating pipes of dia 200 mm. The job includes cutting of already exposed pipes at the interval of every 3 mtr and then taken out by mechanical/manual means. The job further includes excavation of new trenches of 4 feet depth as per direction of site incharge. The used pipes needs to be welded end to end properly and laid along new trenches. The job includes all fittings like anchor fastners, couplings, bends, elbows, flange, tees, etc. The job further includes wrapping the pipe with suitable size glass wool insulation and polythene. The job then includes refilling the soil in layers not exceeding 20 cms. in depth, consolidating each depodited layer by ramming, watering etc. complete as required

SIT&C of 3 no.'s DOL starter in a single box suitable for 7.5 HP Motors

SIT&C of DOL starter suitable for 1.8KW motors

SIT&C of electric panel for Kitchen scrubber as per technical Specifications of Annexue B.

Providing and fixing of 9mm nitrile foam insulation along with 26guage Aluminium cladding on 40mm dia GI pipe as per technical Specifications of Annexue B.

Providing and fixing of stainless steel work table with double sink of size 1500x650x900mmH. The sink would be made of stainless steel with inside ground and polished. The corners would be rounded and the bottom pitched to the drain. The sinks would be provided with a drain valve and a strainer and with a overflow connection. On the bench top just above the sink mixer for hot and cold water connection would be provided.

Providing and fixing of stainless steel work table with under shelves. Overall size of size 1200x600x900mmH. The table top is fabricated out of SS ground and polished to the smooth surface without high edge sections. The under shelf is fabricated out od SS and fixed on the frame.

Providing and fixing of stainless steel work rack with 5 shelvesof size 1830x535x1830mmH

Providing and fixing of Stainless steel pass box of size 600x600x705mmH

Supply, Installation,Testing & Commissioning of Single stage Reciporacting type Air Compressor as per technical Specifications of Annexue B.

SIT&C of Automatic Reverse Osmosis plant of capacity 500LPH as per technical Specifications of Annexue B.

SIT&C of Distribution panel for CSSD equipments as per technical Specifications of Annexue B.

Fabrication and fixing of valve box. The valve box shall be made from 12mm thick both side laminated MDF board of approximate size of (1.5'x1') with glazed shutter of appropriate size. The box shall be fitted with all required fittings etc. The sample is to be got approved from Engineer in charge before installation.

Supply installation , testing & commissioning of horizontal centrifugal Monoblock pump with 900 LPM, 35 Mtrs as per technical Specifications of Annexue B.

Design, Supply ,Installation, Testing and Commissioning of Fire pump Auto Start Panel.

Supply , installation , testing & commissioning of cast iron dual plate wafer type Non return valves PN 1.6 including nuts, bolts, 1.5 mm thick gasket companion flanges as complete in all respect 100 mm dia

Supply , installation , testing & commissioning of cast iron Butterfly valves conforming to PN1.6 I.S.13095 with "Lever" or gear operated, bolts, nuts, 3 mm thick insertion rubber gasket complete including companion flange as complete in all respect

Providing and fixing dial type SS pressure gauge with isolation cock and SS pipe on main header Dial diameter 100 mm calibration 0-12/ sq.cm as per IS:3624

Providing and fixing electrically operated dual type pressure switches with threaded connection for pressure vessel, complete suitable for 0-14 Kg/Sq.cm as IS:3624

Supply ,installation , testing & commissioning of Rubber Bellow including nuts, bolts etc. 100 mm dia

Supply, installation , testing & commissioning of M.S. pipe I.S. 1239 (Heavy class) complete with all fittings like, unions, couplings, bends, elbows, tees, offsets, reducers, flanges as per table 'E' etc as per technical Specifications of Annexue B.. to complete the work as per the requirement at site including painting with two coats of synthetic enamel paint. Pipe welded joint. The cost shall include the MS/GI structural supports as per approved drawings and specifications per running meter .

80 mm dia (Approx.)

100 mm dia (Approx.)

150 mm dia (Approx.)

Supply , installation , testing & commissioning of ball valve with lever and screwed 25 mm dia

Supply , installation , testing & commissioning of Air releses valve 25 mm dia

Relocation of underground fire fighting pipes of dia 150mm. In order to make already installed pipes open, the firm needs to excavate trench of 4 feet depth approx. The exposed pipes needs to be cut at the intervals of every 3 mtr and then taken out by manual/mechanical means. The job further includes excavation of new trenches of 4 feet depth as per direction of site incharge. The used pipes needs to be welded end to end properly and laid along new trenches. The job includes all fittings like anchor fastners, couplings, bends, elbows, flange, tees, etc. The job further includes wrapping the pipe with 4mm thick wrapping tape of reputed make. The job then includes refilling the soil in layers not exceeding 20 cms. in depth, consolidating each depodited layer by ramming, watering etc. complete as required

Supply, Installation, Testing & Commissioning of 24 Volt Float Cum Boost Charger (FCBC) for DG set batteries. The charger shall functionally be equipped with two operating modes; a float mode and a boost mode. Normally the charger should be in Float mode. In case the current under Float Mode decreases a set level, Boost charger should be switched ON. On battery reaching the set value, the Boost Charger should be switched OFF. The charger shall have over voltage and over current protection. It should have Silcion Controlled Rectifier (SCR) control circuit. The winding should be of copper. It should work both in auto as well as in manual mode

Fabrication of Stand of 3 Levels with MS Angle iron 40x40x5mm. The size of each shelf shall be 2’x 2’x 1'(WxLxH). The racks shall be provided with base plates at each leg of size 120x110x3.0 mm thick and corner plates of size size 100x100x18G.

Providing and laying of 10 sqmm single core cu wire along with conduit to connect battery charger with batteries.

Providing and fixing of 2 pole 6A MCB switch.

Providing and fixing of nitrile foam insulation along with 26guage Aluminium cladding on MS pipes of fuel line as per technical Specifications of Annexue B.

25mm dia pipe (9mm thick insulation)

50mm dia pipe (13mm thick insulation)

80mm dia pipe (19 mm thick insulation)

100mm dia pipe (32 mm thick insulation)

Providing and fixing of nitrile foam insulation along with 26guage Aluminium cladding on MS pipes (delivery line) as per technical Specifications of Annexue B.

100mm dia pipe (32 mm thick insulation)

150mm dia pipe (32 mm thick insulation)

Providing and fixing of nitrile foam insulation along with 26guage Aluminium cladding on MS pipes for soft water as per technical Specifications of Annexue B.

25mm dia pipe (9mm thick insulation)

Providing and Fitting of Electrical Insulating Rubber Mats as per technical Specifications of Annexue B.

FAVOURITE ELECTRICALS

NAWCHOO ENTERPRISES