ADDN/ALT AND SANITARY PLUMBING WORK TO BLDG NO. 134 (OR LINE BATHROOM), SPL REPAIR TO ROOF TREATMENT OF BLDG NO 3 AND 4 (JCOs AND OR FAFA) AT OVL AND BLDG NO P158 MG ROAD OF CCSR OFFRS MESS UNDER GE (WEST) LUCKNOW

Amount

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

M&L for rendering 10mm thick in CM 1:3 on ceiling finished surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for preparation of new ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old wall surfaces and applying one coats of white wash complete all as specified and directed.

M&L for non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles, superior quality of size 300 x 600 x 7mm thick in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S & F Granite 20mm thick of any type (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 complete all as specified and directed

M & L for drilling hole in granite stone slab for gas pipe not exc 25mm dia complete all as specified and directed.

Taking down existing steel tubing and conncetion 15mm bore including cleaning for refixing or reemoving from site complete all as specified and directed.

Taking down existing steel tubing and conncetion 20mm bore including cleaning for refixing or reemoving from site complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

M & L Cutting chases, pinning in, for concealed water tubing etc. in brick walls and making good to disturbed surface in cement mortar 1:3, cutting not exceeding 20cm in girth complete all as specified and directed.

S&F in repair vitreous china under counter type Wash basin, white, oval shape of size 555x425mmx195mm including CP waste coupling and 32mm dia waste pipe etc. complete all as specified and directed. Make :- Jaquar(Florentine) Cat part No. FLS-WHT-5701/ Parryware (CASCADE NXT) Cat part No. C0407/Plumber(Arena) Cat part No. PBW-UCB-061B

S&F 15 mm bore CP brass central hole basin mixture quarter turn with U shape round casted spout with 450mm long braided hoses fixed to GI pipe complete all as specified and directed. Make :- ESSCO Jaquar Cat No. TQT516A/Hindware Cat part No. F280009CP

S&F 15mm bore brass chromium plated Hot & cold water wall mixer 2-in-1 system wall unit with overhead shower arrangement with Hot and Cold valves cast copper alloy heavy duty screwed down for iron pipe and fixed complete all as specified and directed. Make :- ESSCO Jaquar Cat part No. TQT517B/Hindware Cat No. F280018CP/ Parryware G3316A1

Supply & Fixing in repair stop valve/Angle valve fancy type cast copper alloy chromium plated half turn with screwed down high pressure with crutch or butterfly handles screwed both ends fixed to GI pipe complete all as specified and directed

Supply & Fixing in repair cast copper alloy long body bib taps chromium plated suitable for 15mm bore pipe with capstan head complete all as specified and directed

Supply & Fixing in repair CP shower rose fancy type 125mm size with or without swivel joints any size including fixed to steel pipe or union of 15mm bore complete all as specified and directed

S&F in repair PVC valveless, syphonic action type, low level, flushing cistern of 10 lit capacity, white, with inlet, ball valve, float valve and handle including bracket, rubber cone and flush pipe etc. and connection to pipes complete all as specified and directed.

S&F in repairs hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrome finish flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed. Make: Jaquar/Marc/ESS-ESS

S&F in repair toilet paper holder, superior quality, fancy type, brass chromium plated with wall hook bracket complete all as specified and directed. Make: Jaquar/Marc/ESS-ESS

Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer complete all as specified and directed

Supply & fix in repair CP Brass Tubular Towel Rail, 12mm dia D type 60cm long between flanges complete all as specified and directed Make: Jaquar/Marc/ESS-ESS

S&F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.

S & F 100mm long aluminium peg set fixed over wooden strip 100mm x40mm section fixed 100mm centre to centre each 06 Nos of pegs complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed. (Note:- cutting hole in wall is deemed to be included in the rate quoted)

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed. (Note:- cutting hole in wall is deemed to be included in the rate quoted)

S & F pressed steel door frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight and fixed with screws complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, cast type, anodised complete all as specified and directed.

S&F factory made Solid PVC door frame of size 60mmx30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.)

S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

M&L for preparation of old or previously treated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

S&F vitreous china urinal, half stall type, white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe), including waste pipe, providing and fixing plugs, bedding urinal against wall etc. complete all as specified and directed.

S & F push type valve pressmatic tap wall mounted including necessary fittings conncetion to half stall urinal Make Jaquar auto closing urinal valve Cat No. PRS-CHR-077 or equvivalent approved

S&F in repairs 1000 litres capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified.

S&F in repairs 500 litres capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified.

Supply & Fixing in repair gun metal gate valve 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

Supply & Fixing in repair gun metal gate valve 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in repairs Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor including plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated or aluminium hinging device ISI marked complete all as specified and directed.

S&F Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 300mm long, mild steel, ordinary rat tail rod pattern springs including including roller and roller plate complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&Fin repair PVC (SWR) pipes in any length with rubber ring joints fixed to wall 75 mm bore complete all as specified and directed

Supply and fixed in repair 75 mm dia PVC floor trap with CP grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed

S&F PVC bends 75 mm bore fixed and jointed with solvent complete all as specified and directed.

S&F in repairs PVC (SWR) pipes in any length with rubber ring joints fixed to wall 110 mm bore complete all as specified and directed

S&F PVC bends 110 mm bore fixed and jointed with solvent complete all as specified and directed.

S&F PVC grating round 140 mm size of PTMT (Minnimum weight 50 gms) fixed and jointed complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including complete removal of existing surfaces complete all as specified and directed.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two Nos glazed & one no wire mesh panels) made of frame 110 X 45 mm & sash 40 X 62 mm both having wall thickness of 2.3 + 0.2mm and single glazed bead/double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60+ 0.2mm thick glavanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), G.I fasteners 100 X 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge (Note-1. Glazed shutters float glass thicknerss not less than 5.00 mm and wire mesh shutter with stainless steel (SS 304) wire mesh 0.36mm dia with aparture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately. 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimenson i.e in depth & width of profile shall be acceptable. Vairation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work quality conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for repairing of RCC projections, chajjas, roofd, facia etc by necessary preparation, scraping, cutting, chiseling, derusting and cleaning of exposed reinforcement, surface of damaged, loose RCC and providing cement concrete 1:1.5:3 using 12.5mm graded stone agrregates including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches of area not exceeding 5 Sqm each and thickness of RCC member not exceeding 70mm including two coats of finishes as provided to the exisiting surface to match with the exisiting surfaces in at any height complete all as specified and directed.

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for one coat of cement base paint on old plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

Dismantling existing water proofing treatment of any description from roof surfaces with brick tiles topping and removing rubbish to a distance not exc. 100m, complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregates and mixed with 3% integral liquid water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Wherever PCC padding shall be provided, screed bed shall not be provided. (iii) Average thickness shall be not exceeding 25 mm for padding.

M&L plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates and mixed with 3% integral liquid water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Wherever PCC padding shall be provided, screed bed shall not be provided. (iii) Average thickness shall be exceeding 25 mm thick but not exceeding 50 mm for padding.

M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Wherever screed bed shall be provided, PCC padding shall not be provided.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Cleaning of prepared roof surface by washing and rubbing etc. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.4 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) Applying a tack coat of hot blown grade 85/25 @ 1.2 Kg/Sqm over APP membrane. (e) Blinding with coarse sand dry @ 0.5 to 1 Kg/Sqm over bitumen primed surface. (f) M&L for 40mm thick brick tiles old size set, jointed and pointed in neat cement slurry over and including 15mm thick screed in CM 1:4 mixed with linseed oil @ 5% by weight of cement complete all as specified and directed. Note :- PCC padding or rendering as required for smooth roof surface shall be measured and paid for seperately under relevant item

M&L for provn of roof treatment with polymeric water proofing membrane on verticle surface all as given below:- (a) M&L 10mm thick rendering in CM 1:3 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement including and mixed with 3% integral water proofing compound complete as directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L 10mm thick rendering in cement mortar 1:4 by mixing polymer based liquid water proofing compound as per manufacturer's instructions complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in bed blocks, roof kerbs or mud stops, rounded or champhered on edges including necessary formwork complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 86 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 86 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 86 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED/

S&F in repairs of surface type round LED 12W downlighter all as per specified and directed. Make: Havells Integra neo (surface) cat part no: IntegraneosurfaceDLS15WLED840S/ Phillips sleek surface SM250 & SM251 (Circular)/ Bajaj sleek surface LED cat no. BGSLO SLEEK SURFACE 12W WH RD

S&F in repairs of surface type square LED 12W downlighter all as per specified and directed. Make: Havells endura neo HE DL surface cat part no: EnduraneosurfaceDLS15WLED857S/ Phillips sleek surface SM260 & SM261 (Square)/ Bajaj sleek surface LED cat no. BGSLO SLEEK SURFACE 12W WH SQ

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way, 415Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, triple pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

M/s Chandra Mohan and Sons