Construction of waiting room with washroom and other allied works for MD office at TRC Srinagar.

Demolishing / dismantling

Demolishing cement concrete manually /by mechanical means i/c disposal upto 50-m lead as directed by the competant authority by engagement of labours as per the directions of Engineer-in-charge (1:3:6) or richer mix complete job.

Dismantling dressed stone work i/c stacking of serviceable material i/c required suppport system complete job .

Engagement of carpenter for carrying various jobs at site sub to actual during execution .

Dismantling roofing i/c valleys , gutters complete job.

Engagement of labours for carrying various jobs at site .(sub to act during execution .)

Earth work in excavationby mannual means in foundation trenches,drains ,pipes,cables, trenches , lift up to 3m including getting out the excavated soil and disposal of surplus excavated soil as directed, in all kinds of soils with 25 mtr lead from cutting edge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming & watering, lead up to 50 m and lift upto 1.5 m.

Supplying ,providing & filling with RBM/Khak bajri in trenches, plinth ,sides of foundations etc.in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming & watering .

Concrete work

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering. All work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) i/c all carriages and head load complete job.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, under floors, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) i/c all carriages and head load complete job.

Providing and laying reinforced cement concrete work in beams , suspended floors etc excluding the cost of centering, shuttering and finishing: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) i/c all carriages and head load complete job.

REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting propping etc, and removal of form for:-

a.Foundations, footings, walls etc.

b.Suspended floors, roofs, landings, balconies, and access platforms

c. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

BRICK WORK:-

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth , walls including curing in Cement mortar 1:6 (1 cement : 6 coarse sand) all works upro floor v level i/c all carriages and head load complete job .

P/l stone solling quarry stone in layers for saokage pit i/c all carriage and head load.

MARBLE & GRANITE WORK:- Granite Stone Flooring

Providing and laying devri stone flooring of approved quality , hand dressed and machine cut of average thickness 40-50 mm in cement sand mortar bedding 1:4 mix (20-25mm thick ) properly aligned , levelled i/c cutting dressing ,rubbing , filling of joints with cement slurry curing , finishing smooth complete in all respects i/c all carriage and head load .

P/L Chisel dressed devri stone of size 300x200mm face with 150mm depth in cement mortar 1:6 (1cement:6 coarse sand ) upto plinth level one face dressed i/c nosing wherever required using fine chisel dressed i/c all carriage and head load .

Extra for chiselling of devri stone

P/F of available devri stone in cement mortar bedding 1:4 mix with 20-25 mm thickness i/c cutting ,dressing ,rub bing , filling of joints with cement slurry , curing , finishing smooth complete job in all respects i/c nosing wherever required . The measureamebt will be given for finished surface .

P/F devri stone cornice hand dressed and carved /moulded to approved profile of 75-100mm fixed at required height ,true to line and level i/c cutting ,shaping ,moulding bedding in cement sand mortar 1:4 , proper anchoring /support as required ,jointing finishing ,curing complete job.

WOOD & PVC WORK:-

Providing wood work in frames of doors, windows, clerestory windows and other building /room frames wrought framed/ framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length . As per architectural drawings and directions of the engineer-incharge the job also includes providing anchor bolts of desired size and dia as directed wherever required i/c required hold fast , primer coat and appying synthetic enamel paint two or more coats i/c all carriages and head load KD wood imported

Providing and fixing 30mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, tower bolts of required size , ALdrops excluding panelling which will be paid for separately, all complete i/c primer coat and appying synthetic enamel paint two or more coats and all carriages /headload as per direction of Engineer-in-charge. using KD wood

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws lSI marked M.S. pressed bright finished butt hinges , tower bolts , Al drops with necessary screws of required size using KD wood i/c applying primer coat and synthetic enamel paint two or more coats all carriages and head load complete job.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows , frames (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weighing not less than 10 kg/sqm) i/c all the required beading carriage and head load .

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick the work includes all the hardware items like handle , tower bolt , AL -drop etc complete in all respects

Providing and fixing bright finished Stainless steel tower bolts (barrel type) with necessary screws etc complete:

Providing and fixing ISI marked oxidized M.S. door latches conforming to IS : 5930 with screws complete:300x20x6 mm

Providing and fixing bright finished brass L drop of standard dimension of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

P/F weather boarding of kd wood 20 mm thick with necessary overlap and required framework as requireded i/c all the carriage from source to s.o.w

Providing and fixing of plained eaves boarding using kd wood 300x40 mm i/c necessary framework if required complete job in all respects.

Providing ,hoisting and fixing trusses/purlins/rafters/post/post-plates, base plate or like components i/c cost of screws etc complete using first class budloo/fir wood i/c applying wood preservatives for base plate and vertical posts outside against wood damages by water i/c all the required anchor bolts, jointsetc as required and decided by the competant authority during execution all carriages complete job.

P/F of commercial plywood 8mm thick as directed with nails in proper level and alignment inclusive of framework ,cornice etc wherever required i/c carriage from source to site of work complete job.

P/F 6-mm thick(SSL) mdf in ceillings , walls upto any height as per directed pattern and design i/c cornice , carriage and framework wherever required i/c nails , fevicol all complete in all respects complete job.

P/F Rait wood panelling 12mm i/c cornices,boxing wherever required with necessary screws e etc fixing of panelling upto floor v level i/c of all the scaffolding etc i/c framework of budloo/fir wood/ PLy joists at desired spacings or as per the satisfication of the engineer-in-charge i/c of carriage from source to site of work complete job the work has to be carried as per the satisfication of competant authority

P/F rubber wood boxing, skirting ,dedo of desired dimensions in linear and curvilinear portions as per the design and choice of competant authority complete job .

providing/fixing of ornamental ist class kd wooden post as per approved drawing 300x200 mm with appropriate lenth approximatelu upto 12 feet as required during execution and all the required accessories like geyser bolts , wooden base plate of appropriate thickness etc as decided by the competant authority along with carving and polishing as directed complete i/c all the carriage complete job .

P/F khatam bandi ceilling of first class budloo / fir wood excluding the cost of framework which is to be paid seperately i/c carriage and head load complete job. Panch Murabah

Flooreing:-

P/F of laminate wooden flooring (AC4 Abrasion resistance ) approximately6- 8mm thick with foam in subfloor and as per approved design , colour in linear or curvilinear portions with side cornice /beading i/c of intermediate flat anchor beading of approved size and with all necessary fixtures i/c preparing the subfloor by removing baseboards , shoemolding to expose the surface wherever required i/c replacing the damaged area in subfloor as directed and tighten any loose area in subfloor i/c levelling of floor wherever required by way of levelling compound and using a belt sander for any area that is raised and further vaccuming the surface first and then wiping of any left over dust with a moist cloth i/c using a weighted roller over the surface when finished i/c of adhesive , carriage and head load complete job in all respects.

Providing and fixing polished glazed vitrified tiles(PGVT) full body charged in walls of approved size and dimensions 1200x600 mm conforming to IS standards of approved make and quality from Kajaria/johnson /SOMANY colour ,design and choice to be carried by the Engineer in charge .the tiles must be cut with the zero chipping diamond cutter only laying of tiles with the notch trowel ,plier,wedge, clips of required thickness ,levelling system and rubber mallet for placing the tiles gently and easily (thickness to be specified by the manufacturer), with water absorption less then 0.08% and laid with cement based high polymer modified quick set tile adhesive (water based ) in average 6mm thickness i/c grouting of joints with epoxy grout mix further providing spacers while fixing tiles i/c carriage from source to S.OW all complete .

Providing and fixing polished glazed vitrified tiles(PGVT) full body charged in floor of approved size and dimensions 600x600 mm conforming to IS standards of approved make and quality from Kajaria/johnson /SOMANY colour ,design and choice to be carried by the Engineer in charge .the tiles must be cut with the zero chipping diamond cutter only laying of tiles with the notch trowel ,plier,wedge, clips of required thickness ,levelling system and rubber mallet for placing the tiles gently and easily (thickness to be specified by the manufacturer), with water absorption less then 0.08% and laid with cement based high polymer modified quick set tile adhesive (water based ) in average 6mm thickness i/c grouting of joints with epoxy grout mix i/c carriage from source to S.OW all complete .

chequerred precast cement concrete tiles in footpath jointed with neat cement slurry i/c rubbing cleaning on 20mm thick bed of cement mortar 1:4 mix i/c all carriages and head load .

Roofing:-

Providing corrugated pre painted sheet roofing i/c vertical curved surface fixed with polymer coated j or L hooks bolts and nuts 8mm dia with bitumen and G.I limphet washers filled with white lead i/c a (upto any pitch in horizontal /vertical or curved surface excluding the cost of purlin rafter and trusses and i/c cutting to size and shape wherever required 0.50 mm thick with zinc coating not less then 275gram/sqm i/c carriage from source to site of work ]i/c use of ridges /valleys wherever required as per the directions of Engineer-in-charge complete job.

Providing ridges or hips of 60cm overall width with coloured G.S sheets fixed with polymer coated j or L hooks , 0.5mm thick with zinc coating not less then 275gram/sqm i/c carriage and head load

Providing valleys of 90 cm overall wide in coloured G.S sheets fixed with polymer coated j or L hooks complete using 1mm thick with zinc coating not less then 275gram /sqm complete i/c carriage and head load .

Finishing:-

15 mm cement interior plaster of mix: 1:4(1 cement: 4 fine sand) incl all taxes etc complete job.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade & colour. Two or more coats

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

French spirit polishing : Two or more coats on new works including a coat of wood filler

P/F WPC (wood plastic composite ) louvers 6 inches wide and of standard lenth in walls/ceilling of approved design ,shape and thickness of approved make and quality in walls and ceilling of approved pattern and design i/c all the required accessories like fastener clip ,saddle clip nails ,hanging bracket ,corner profile/corner patti complete job in all respects and fixing to walls /ceilling by way of special adhesive and nails i/c of carriage and head load.

Sanitary Fittings:-

Providing and fixing one piece Water closet with inbuilt jet and 10 litre flush tanky soft close slim seat cover ,hinges ,accessories set with size of 365x525x400/approved size of approved brand and quality ), conforming to IS 7231, with all fittings & fixtures complete including cutting and making good the walls and floors wherever required I/C carriage from source to S.OW with make of cera /hindware / jaquar /approved equivalent

P/F vanity washbasin with 32-36 inches height , 18-24" width and with depth of 18" app made of hdhmr material and with fixing accessories /equivalent with approved make and qualityi/c carriage all complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder C.P. brass of approved make and quality.

Providing and fixing of stainless steel Towel rail 450-mm long of approved quality and make of cera /hindware / jaquar /approved equivalent .

P/F towel ring stainless steel with round flange of approved make and quality from with make of cera /hindware / jaquar /approved equivalent

P/F soap dispenser with glass bottle all complete of rquired make and quality stainless steel of jaquar make (cat no :ACN-1135N) OR equivalent make .

P/F soap dish holder of rquired make and quality stainless steel with soap grabbing of with make of cera /hindware / jaquar /approved equivalent

P/F ball value brass of approved quality high or low pressure with plastic floats complete.

a. Ball value-25-mm

b. Ball value 20-mm

Providing and fixing concealed stop cock incl the exposed part kit of concealed stop cock and flush cock with fitting sleeve operating lever and adjustable wall flange with seal (Angular stop cock with wall flange of approved quality i/c regular body of concealed stop cock with protection cap) : make Jaquar or equivalent i/c carriage from source to site of work .

P/F tumbler holder all complete of required make and quality stainless steel of jaquar make OR equivalent make .

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore Make Hindware Model No F730011/ Jaquar Continetal series or Equivlanat

Providing and fixing Angle value with wall flange of approved quality : make Jaquar or equivalent

Providing, fixing, testing and commissioning of single lever basin mixer without popup waste with brass nuts casted spout complete including cutting and making good wherever required. Make jaquar / or Equivlanat

Providing and fixing C.P brass wall mixer 3 IN 1 with overhead shower and other accessories and with wall flange and connecting legs , crutch all included as approved by engineer in charge 15mm nominal dia make of Jaquar /equivalent complete job.

Providing and fixing 125 mm dia, 1 mm thick stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.Of JAQUAR , CERA or approved equivalent make.

Providing and fixing corner glass shelf(three piece set) of approved make and quality complete job in all respects .

Providing and fixing C.P. Brass extension nipple (size 15-mm x 50-mm) of approved make and quality as per direction of Engineerin- charge.

Providing and fixing Health faucet with 8mm dia ,1.2 metre long flexible tube and wall hook and with N.R.V of approved brand and manufacturer with make of cera /hindware / jaquar /approved equivalent

P/F 450-mm long braided hose with brass nipple ,15-mm nut ,o-ring and rubber washers of jaquar makewith make of cera /hindware / jaquar /approved equivalent

Supply, fixing, testing and commissioning of storage type automatic electric hot water heater made out of heavy gauge steel jacket finished with rust proof baked-on glossy white enamel paint, inside glass lined heavy gauge steel tank, 25 mm thick polyurethane foam insulation, thermostatically controlled immersion heater with pilot neon lamp, replaceable magnesium anode bar, suitable for 8.0 bar maximum working pressure, cold water inlet and hot water outlet pipe, suitable length of electrical cable and 15 amp 3 pin plug top, non return valve and pressure release valve complete in all respect including testing etc. (Horizontal/Vertical) (of Venus , Jaquar brand ).

a. 50 litres storage capacity

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Soil, Waste, Rain Water & Vent pipe

a. 4" P.V.C pipe with all fittings and accessories

b. 3" P.V.C. pipe with all fittings accessories .

c. 1.5" PVC PIPE I/C OF PVC BEND ETC ALL FITTINGS COMPLETE made of finolex or equivalent.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed/external fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc and inclusive of carriage.

a. PN-20 pipe , 25-mm OD(SDR-7.4)

b. PN-20 pipe , 20-mm OD(SDR-7.4)

c. PN-20 pipe , 32-mm OD(SDR-7.4)

Providing and fixing PPR Unions

a. PPR Union 20-mm

b. PPR Union 25-mm

c. PPR Union 32-mm

Providing and fixing of brass/bronze lever operated valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 10 kg/cm². UNIK/Zoloto or equivalent.

a.20-mm nominal bore

b.25-mm nominal bore

c. 32-mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank

Sewerage System Upto First Manhole

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil.Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. ( excluding cost of cement) Inside size 90x80 cm and 45 cm deep including CI Cover with frame (light duty ) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg): 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5