PROVN OF LIBRARY AND 30X GEYSERS FOR HQ UF UNDER DGRR WORK AT KIARI AREA AND PROVN OF SOCKAGE WELL AND SPL REPAIR TO BLDG NO. T-149 AT KARU AREA UNDER GE 860 E

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

M&L 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and as directed by E-in charge.

Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG at all heights with GRG false ceiling tiles of size 595X 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS476(part4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanised iron sec of 0.33 mm thick (galvanised @ 120 grams per sqm incl both sides) comprising of main -T runners of size 15x 32 mm of length 3000mm ,cross-T of size 15X32 mm of length 600 mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @80mm per sqm ) i'e 50mm long 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x 25 x 2 mm ,Galvanised iron perimeter wall angle of size 24 x 24x 0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and as per directions of the Engr-in-Charge.

Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section frame work complete all as specified and directed by Engr-in-Charge.

M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 Sq cm n.exc 25 Sq cm complete all as specified and as directed by Engr-in-Charge.

M&L second class hard wood timber scantling bull?nosed, splaye, chamfered or rounded on one edge or face, secured with nails or brads, sectional area exc. 3 Sq cm n.exc 6 Sq cm complete all as specified and as directed by Engr-in-Charge

Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description not exc 1 sqm each complete all as specified and as directed by Engr-in-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welde complete all as specified and as directed by Engr-in-Charge.

S&F for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr in Charge.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips all as directed by Engr-in-Charge.

Supply and fixing 3 mm sheet glass thick ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed by Engr-in-Charge.

M&L for 75mm thick PCC (1:3:6) type C2 (Using 20mm graded crushed stone aggregate) as in floor levelling and finished even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for sceed bed or bedding layer of cement mortar 20 mm thick 1:6 for laying floor finishes complete all as specified and as directed by Engr-in-Charge.

M&L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous China wash hand basin, white, flat back, size 580x450irun include waste pipe, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) and waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

M&L preparation of new or previously untreated steel surface of any description, over 10cm in width or girth,not otherwise described and apply one coat of red oxide, zinc chrome and two coats of synthetic enamel (ordinary tint) paint complete all as specified and directed by Engr-in-Charge.

M&L preparation of surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth applying two coats of synthetic enamel (ordinary tint) paint complete all as specified and directed by Engr-in-Charge.

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavating over areas, exc 1.5 m and n.exc. 3.00m deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavating over areas, exc. 3.00m deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, build in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed by Engr-in-Charge.

M&L for providing RCC M- 25(Nominal mix) in Slab supported on walls, beams and columns in roof , Landing, balconies, deck slabs and in shelves and similar work complete all as specified and directed by Engr-in-Charge.

M&L for formwork to soffits of suspended slabs, flat, such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces of concrete complete all as specified and as directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ® rough finished surfaces of concrete complete all as specified and as directed.

M &L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in cover slab for manholes set in CM 1:4 including necessary form work complete all as specified and directed by Engineer in Charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms complete all as specified and directed by Engr-in-Charge.

Removing excavated material soil to a distance n.exc 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, laying of electric cables/pipes etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engr-in-Charge.

M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) using 20 mm graded crushed stone aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished the surface even and smooth (without using extra cement) complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as specified and directed.

M&L for 75 mm thick PCC type C1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed at site complete all as specified and directed by Engr-in-Charge.

M&L for Cement Concrete type D-2, 1:4:8 (using 20 mm graded crushed stone aggregate) 100mm thick as in Sub base complete all as specified and directed.

M&L for 40mm thick Cement Concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in floor Sub base complete all as specified and directed.

M&L SDC Laminated flooring 8mm thick of any coloured manufactured by direct pressure laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength complete all as specified and directed by Engineer-in-Charge.

S&F coloured PVC designer madular wall cladding 5 to 6mm thick with air gap, installed with necessary fixing GI channel or frame with end joints on edges (designed, colour patterns as per directions by Engr in charge. The frame work will be fixed to wall using aluminium screws, complete all as specified and as directed by Engr in charge. Note:- If necessary size of the frame work wall/ceiling panelling will be changed as per site requirement.

S&F Aluminium door/window frame (or) shutter with 5.50mm thick Sheet glass, ordinary quality Tinted or plain and glazing with Aluminium snap beading and necessary fittings complete all as specified and directed by Engr in charge.

M&L rolled mild steel work such as angle sections fixed independently as in posts cut to ordinary lengths complete all as specified and directed by Engr-in-Charge.

M&L steel work in roof trusses (framed ) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as directed by Engr-in-Charge.

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted, bolted or welded attachment confirming to Fe 410-W (Gde E-250), complete all as specified and directed by Engr-in-Charge.

M&L for mild steel bolts neck exc 10 mm dia and n exc 15 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or undecorated surfaces of wall and applying two coats of cement base paint including cornices, pilasters etc complete all as specified and directed by Engr-in-Charge.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers with and including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as directed. Note : 1. The cost of Metal flush boxes and accessories etc is deemed to be included in quoted rate. 2. In case cutting & chasing of conduit is encountered with any beam / column, the PVC casing & capping or surface conduit will be used to avoid any damage to the RCC portion. 3. No cutting & chasing shall be done on ceiling surface for laying PVC conduit for ceiling fan point wiring etc, hence the PVC casing & capping or surface conduit will be used for the same.

One light / bell / buzzer / exhaust fan point controlled by one No. 1-way, 5 Amps switch.

One socket outlet 3 pin, 5 Amps on independent board, controlled by one No. 5 Amp switch.

One socket outlet 3 pin 5 amps on the same board controlled by one No. 5 Amp switch.

Description all as per Srl item No. 65.00 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit.

S&F in repalcement Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.

S&F in repalcement Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.

S&F in repalcement Switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed.

S&F in repalcement Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F in repalcement Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

S&F in repalcement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed..

S&F in repalcement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repalcement angular lamp holder, PVC/Polycaronate type with back plate suitable for 9 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

S&F in repalcement LED bulb 9Watt complete all as specified and directed by the Engineer-in-Charge.

S&F in repalcement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

S&F in repalcement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvre complete in cluding making hole in the wall and making good the disturbed surfaces complete all as specified and directed by the Engineer-in-Charge.

S&F in replacement DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work including taking down old unserviciable earthing complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheathed electric cable 1100 volts in and including PVC casing and capping of 25 mm and above (as per conductor run ) with all fittings/ accessories and including PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point,bell,exhaust point, bulk head, independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

Description all as per Srl item No. 83.00 here-in before but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per Srl item No. 83.00 here-in before but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per Srl item No. 83.00 here-in before but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge.

S&F Modular switch 1 way 6A , 1 module size complete all as directed by Engr-in-Charge.

S&F Modular switch 1 way 16A , 1 module size complete all as directed by Engr-in-Charge.

S&F Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed by Engr-in-Charge.

S&F Modular Socket , 6 A / 16 A, 5 Pin, 2 module size complete all as directed by Engr-in-Charge.

S&F Modular cover plate with frame 6 module size complete all as directed by Engr-in-Charge.

S&F Modular cover plate with frame 4 module size complete all as directed by Engr-in-Charge.

S&FModular metal flush box 6 module size complete all as directed by Engr-in-Charge.

S&F Modular metal flush box 4 module size complete all as directed by Engr-in-Charge.

S&F Modular cover plate with frame 1 module size complete all as directed by Engr-in-Charge.

S&F Modular metal flush box 1/2 module size complete all as directed by Engr-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing LED round slim panel light 12W , 6500K complete all as specified and directed by the Engineer-in-Charge.

S&F DB, Single Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface complete all as specified and directed.

Supply and fixing MCB single pole and neutral 32 to 40 Amps, 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing new energy saving LED Bulk head fitting 10 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Engr-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 1991 Part-I and connecting to CBDB’s as specified or indicated including testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 16 Sqmm 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying, streching & testing of cable in trenches complete all as specified and directed by Engr-in-Charge. Note :- Only punned thickness i.e 18cm shall be measured and paid.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated and timer setting, complete with all accessories such as safety valve, thermostate, NRV, connection piece, etc. complete all as specified and as directed by Eng- in-charge.

Supplying & Laying, connecting and testing, tube medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of size 15 mm dia, all as specified and as directed by Engr-in-Charge.

S&F stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed of size 15 mm complete all as specified and as directed by Engr-in-Charge.

S&F bib taps chromium plated , fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm complete all as specified and as directed by Engr-in-Charge.

S&F PVC connection for Hot Water 15mm with CP nuts and bolts and washers of length 600mm complete all as specified and as directed by Engr-in-Charge.

S&F PVC connection for cold Water 15mm with CP nuts and bolts and washers of length 750 mm complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring with PVC insulated, PVC unsheathed FR cable 1100 V grade , single core, stranded, copper conductor cable 4 sqmm size, drawn into including non metallic rigid PVC Casing-N-Caping (ISI marked) medium grade not less than 25 mm with all casing-n-caping accessories in surface and including PVC unsheathed FR cable 2.5 sqmm stranded copper cable (green insulation) for continuous earth wire and including pressed steel concealed terminal boxes of required size of 1.6 mm thick, covered with 3 mm thick plastic laminated bakalite sheet, ISI marked all as directed. Note : Wiring shall be done through non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings in roofs if required. The cost for the same shall be deemed to be included in the unit rate quoted.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by Engr-in-Charge.

THINLES OTZER

M/S WEB COMPNAY

M/S BHAT ENGINEERS

M/S GLOBAL ENGINEERS

M/S BILAL AHMAD BHAT

M/S ASGAR ALI TIMBER SHOP

M/S ZTECH

SUMEET TRADING CORPORATION