REPAIR AND MAINT OF FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTINGS AND OTHER MISC WORK IN MES INSTALLATION B/R AND E/M CELL BLDG AT TIMARPUR GRN AOR OF AGE B/R GE NORTH DELHI CANTT 10

Amount

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) Type C-2 (20mm graded aggregate) as in plinth protection incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified. Note:- The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12mm wide and 50mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L for 40mm thick Cement concrete 1:2:4 type B-1 as in floor including surfaces to be finished even and smooth with using extra cement complete all as specified and directed

M&L fo 30mm thick sand fillig under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for chequered cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed

M&L fo vibro compacted precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 80mm thickness M-35 grade with gray cement and pigment complete all as specified and directed.

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making dainage opening wherever required complete all as specified and directed.

M&L cleaning,greasing,resecuring,easing & adjusting any size etc, without taking down Steel rolling shutters, and one shop coat of primer erected in position as indicated, complete all as specified and directed.

S&F steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F in repairs for Safety level Locks Mild Steel with 4 levers for rolling shutters complete all as specified and directed.

S&F in repairs for bearing for rolling shutters complete all as specified and directed.

S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete including removal of existing wooden/steel doors complete all as specified and directed.

MSL for cleaning new/old surfaces with wire brushes and washing with water allowed to dry applying three layer of exposed waterproofing treatment of wall and floor etc(Make of PU primer - Dek guard EP -302 of M/S dostoc. dr. food or equivalent approved brand Make of PU paint - Dek guard PU or equivalant approved brand. This layer shall be allowed to air cured for every 4 hrs, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water complete all as specified and directed.

M&L for rendering 15mm thick in two layers (10mm & 5mm) in cement mortor 1:4 on brick/ concrete surfaces with water proofing compound in top layer 200ml for bag of cement and finishing the surface even and smooth without using extra cement complete all as specified directed. Note :- 1. The work shall be executed up to G+4th floor Height. 2. WPC shall be measured and paid separately

M&L for rendering 10mm thick in CM 1:6 brick work or concrete in inernal surfaces of wall finished even and fair without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick with water proofing compound in cement mortar 1:3 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement in ceiling/ Chajjas complete all as specified.

Supply only water proofing compound complete all as specified and directed.

M&L for preparation new plastered surfaces of any description and applying three coat of white wash on ceiling surfaces complete all as specified and directed

M&L for complete removal and preparation old unplastered surfaces of any description and applying two coat of white wash on ceiling surfaces complete all as specified and directed

M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt esistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10. sqm over new surfaces complete all as specified and as directed

M&L for complete removal of existing treatment and preparation of old surfaces and applying two or more coats of 100% Premium acrylic emuision paint having VOC less than 50 gm/itre and UV resistance as per IS 15489 2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 itre/ 10 sgm over including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces compiete all as specified and as directed.

M&L for preparation of New surface of wall and applying two coat of of colour/white wash to match the colour of existing surface complete all as specified and directed.

M&L for washing rubbing down and scraping of old decorated surfaces and preparation of old wall plastred surfaces for and applying one coat of of colour/white wash to match the colour of existing surface complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Rolled mild steel sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W including cutting welding & neccesssary fittings such as nut bolt, plate complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including takking down and removing to store complete all as specified and directed.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00Sqm each(without taking off shutters from the frame) and complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain PVC sheet colour wood grain printed and edges matched with the colour sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 30mm th 2nd class hardwood flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for stainless steel hinges 100mm medium weight complete all as specified and directed.

S&F aluminium anodised aluminum handle 150mm long extruded section complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm long extruded section complete all as specified and directed.

S&F steel window with side hung shutters inci. projecting type hinges with steel handles steel peg stay fixing lugs complete with glazing bar 10 cm devetailed or welded incl one shop coat red oxide primer incl taking down of old steel windows of any size complete all as specified and as directed.

S&F steel window with side hung shutters inci. projecting type hinges with steel handles steel peg stay fixing lugs complete without glazing bar 10 cm devetailed or welded incl one shop coat red oxide primer incl taking down of old steel windows of any size complete all as specified and as directed.

S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars incl taking down of old steel ventilators of any size complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; side hung or barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all specified and directed.

S&F sheet glass of 4mm thick ordinary quality glass and glazing with oil putty in square n exec 0.5 Sqm in each pane complete all as specified and directed..

S&F for figured glass pin headed of 4mm thick ordinary quality glass and glazing with oil putty in square n exec 0.5 Sqm in each pane complete all as specified and directed..

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling, gaps in between glazed & fly proof steel window, cills, railling up to 60 cm in height etc including necessary form work as required complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed.

Dismantling of floor tiles, mozzac floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed.

M&L for 15 to 18mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm thick cement plaster (1:4) including rounding the exposed surfaces of granite complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7mm to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed.

M&L glazed ceramic coloured tiles of digital for elevation/external size 450 x 300 x 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7mm to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed.

M&L for providing Mirror polished kota sotne slab flooring 20-22mm thck over and including 15mm thick screed in Cement morter1:6 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including demolition complete all as specified and directed.

M&L for mirror polished kota stone slab 20 to 22mm thick as in dado skirting over cement 10mm thick backing coat in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 except bricks complete all as specified and directed.

S&F in Repairs 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including necessary handles, hinges, complete all as specified and directed

Taking up or down steel tubing and connections including clening for refixing or removal to store of 15mm bore complete all as specified and directed.

S&F for 15mm bore tubes medium grade galvanised with and including all GI fittings (such as bends, elbows, tees, connectors, short pieces, back nuts, unoins, caps and plug etc) and fixed complete to wall and ceiling or laid in/on floors complete all as specified and directed. Note:- Work will be executed upto 15 mtr height neccessary scaffolding arrangements is included in quoted rates.

Refixing of old steel tubing and connections in new or old position (wall, ceilng, floors, etc) of 15mm bore complete all as specified and directed

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.

Taking up or down steel tubing and connections including clening for refixing or removal to store of 20mm bore complete all as specified and directed.

S&F for 20mm bore tubes medium grade galvanised with and including all GI fittings (such as bends, elbows, tees, connectors, short pieces, back nuts, unoins, caps and plug etc) and fixed complete to wall and ceiling or laid in/on floors complete all as specified and directed. Note:- Work will be executed upto 15 mtr height neccessary scaffolding arrangements is included in quoted rates.

Refixing of old steel tubing and connections in new or old position (wall, ceilng, floors, etc) of 20mm bore complete all as specified and directed

S&F in repair fancy type chromium plated long body bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified

S&F in repairs 15mm bore Stop valves concealed type fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm bore angle cock fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP brass pillar taps cast copper alloy with capstan heads,chromium plated screwed down high pressure with or without lettered hot or cold with long screwed sank and flynuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 20mm dia brass CP towel rail 600mm long complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550 x 400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings, and pedestal etc complete all as directed and spcified.

S&F in repairs fancy type chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F for anodised aluminium with powder coating of any colour thickness of coating not less than 50 microns frame for doors, windows, ventilators & partition with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium with podwer coating any colour (powder caoting thickness not less then 50microns) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F in repairs 15mm bore PVC connection pipe of 600mm size with 2 Nos brass check nuts with washers complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern' size 580mm x 440mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pedstal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and directed.

S&F including taking down of PVC water storage tank 500 It capacity HDPE double layered cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20mm dia and (Minimum weight

S&F in repair grating doom 125mm dia with or without waste hole of PTMT (min wt 40 gms) complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down PVC Pipe including all fittings complete all as specified and directed.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single T' equal or unequal with access door Complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, single 'Y' equal or unequal Complete all as specified and as directed.

S&F posts & struts in fencing of angle/channel/flat section including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing barbed wire and coil etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified.

Supply of chain link fencing complete all as specified and directed

Fixing only chain link fence complete all as specified and directed

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for laying APP base plymeric membrane, finished even and smooth without using extra cement complete all as speified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bitumenous primer @ 0.4 Its per Sqm over plastered surfaces of roof incl parapet surface. Note:- (a) Bituminuous primer shall be "TANK MASTIC" manufactured by "EMUFALTE" manufactured by M/s Texsa India Ltd. or equivalent) (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3mm thick weight not less than 3.5 Kgs per Sqm reinforced with non woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii Applying two coats of Aluminium paint over APP membrane.) (iv) Cutting groove in brick wall 75mm wide and 65mm deep and shoping horizontal face of groove with cement mortar 1:3

M&L for dismentaling/demolition of RCC fins/parapets of any size including cutting down rusted reinforcement and makig good with CM 1:3 and provided drip course 25mm x 10mm deep with CM 1:3 at edges of RCC slab/chajjas etc complete all as specified and directed.

S&F in repairs 4 lever Verical locks 100mm long for aluminum doors comlete all as specified and directed

QUALITY CONSTRUCTIONS CO (BID ID -3500652)

Ajay Sahu & Sons (BID ID -3506984)