Construction of Rest Shed Building Agalpur for the Year 2025-26

Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge.

Ground Floor

Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

Flyash brick masonry in cement mortar (1:6) in foundation/superstructure using Flyash bricks of 25x12x8cm size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground floor

Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground floor

1st floor

R.C.C work (1:1½:3) with clean hard crusher broken granite chips of 12mm size of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge.

Column base

Ground Floor

Columns & Beams

Ground Floor

1st floor

Head room

Plinth beams

Ground Floor

Lintels

Ground Floor

1st floor

Head room

Chajja

Ground Floor

1st floor

Head room

Roof Slab

Ground Floor

1st floor

Head room

Stair case

Ground Floor

1st floor

Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors(weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Flyash brick masonry in cement mortar (1:6) in foundation/superstructure using Flyash bricks of 25x12x8cm size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

20mm th Cement plaster in C.M (1:4) including punning over walls, finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Coal taring two coats including cost of coal tar and tar paper with all cost, conveyance, labour, T&P and cess etc. complete as per specifications and direction of the Engineer-in-charge .

Ground Floor

1st floor

16mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

12mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Wall priming one coat with approved primer with brush to wall surface after cleaning the surface including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Wall painting two coats with plastic emulsion paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Distempering two coats with approved shade, over a coat of priming with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Finishing walls with water proofing cement paint (Weather coat) of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Supplying, fitting, fixing of window (sliding type) made up of aluminium section 9778 as windows frame section no.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement, all fittings including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

1st floor

Supplying, fitting and fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

1st floor

Head room

Providing fitting and fixing of false ceiling with aluminium anodised T section no. 3215 with 2' - 0" center to center, L section no. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'- 0" x 2' - 0" with card board suspended from ceiling including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

1st floor

Providing and fixing Vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

1st floor

Providing and fixing Chequred tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

1st floor

Providing and fixing Chequred tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

1st floor

Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

1st floor

Providing and fixing rain water down pipe with necessary bend shoes and heads including cost of 75mm dia earthen pipe, clamps and nails etc. with all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge

Ground Floor

1st floor

Point

110mm dia U-PUC pipe(4kg/cm2)

110mm dia PVC Door Tee

110mm dia ‘ P’ Trap

110mm dia ‘ PVC Nahani Trap

110mm dia PVC Door Bend

110mm dia PVC Offset

110mm dia PVC Plain bend

110mm dia PVC cowl

125mm dia C.P. Grating

Supplying all materials labour T & P and fixing wash down water closet (European water closet) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated crews including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification and direction of E.I.C.

E.W.C.with ‘S’ Trap with sheet cover(hindware,parryware)

Supplying all materials, labour, T & P and fixing kitchen sink with hole for pillar taps with C.I./M.S. brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.

600x450x200 mm stainless steel kitchen sink with 40x1150mm dia PVC waste pipe

Supplying all materials, labour, T & P and fixing wash basing with hole for pillar taps with C.I./M.S. brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.

550mm x 400mm W.H.B. with 32mm dia c.p. west, west pipe , brackets and connection pipe .(make- parryware)

Pedestrial for W.H.B. (make- parryware)

Supplying all materials, labour T & P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plugs with C.P. screws and washers complete as per P.H. specification and direction of E.I.C.

Glass Mirror 600mmx450mm size B.E mirror (fixed type)

Supplying all materials, labour T & P and fixing standard size glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.

450mmx600mm size plate Acrylic shelf

Supplying all materials, labour T & P and fixing standard size C.P. towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.

25mm x 600mm long C.P. towel rail

C.P. Towel Ring

Supplying all materials, labour T & P and fixing standard size C.P. soap holder complete with C.P. Brass brackets fixed to wooden plug with C.P. screws as per P.H. specification and direction of E.I.C.

C. P. Soap holder

Supplying all materials labour T & P and cutting holes through brick / stone masonary walls for taking H.C.I./ PVC and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C.

375mm thick wall

Roof cutting

Supplying all materials labour T & P and fixing Digital tiles in floors, threads, landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C.

1st. Floor:-

Supplying all materials labour T & P and fixing porcelain glazed tiles in dados skirting and risers of steps on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C.

Wall Tiles:- 1st. Floor:-

Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shal

l conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete

Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete

S.D. PORTION:-

Supplying all materials labour T & P and constructing inspection chamber of the following sizes with C.C. (1:36) using 40mm size h.g. metal on bed, 1st class K.B. Brick work in C.M. (1:6) moulding and shaping the channel inside and benching with C.C. (1:1.5:3) using 12mm size h.g. chips, 12mm thick C.P. (1:3) with punning to inside, cement flushpointing (1:3) to outside, R.C.C. cover slab in C.C. (1:1.5:3) using 12mm size h.g. chips with R.C.C. man hole cover, e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site, payment of royality, taxes etc. all complete as per approved specification and direction of E.I.C.

Inside size 760mm x 760mm x 460mm

Supplying all labour T & P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B. Brickwork in C.M.(1:6) for the remaining height at top, 12mm thick C.P. (1:4) inside and outside over masonary brick work, gravel packing in the rear of well steining R.C.C. cover slab in C.C. (1:1.5:3) using 12mm size h.g. chips fitted handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, wattering, curing, conveyance of all meterails to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.

1.00m dia x 2.00m deep soak pit

Supplying all materials labour T & P and laying P.V.C. pipe sewer line, Grade-A of the following internal dia in trenches (to level or slope) and jointing with gasket & stiff mixture or C.M. (1:1), C.C. (1:3:6) with 40mm size h.g. metal on bed of the trench and hunching or allround concrete encasing with C.C. (1:4:8) using 40mm size h.g. metal including curing, conveyance to workside, payment of royality, taxes etc. and testing all complete as per approved drawing, specification and direction of E.I.C.

110mm dia p.v.c.pipe with Hunch top

15 USER SEPTIC TANK:-(INSIDE SIZE 2.50MX1.50MX2.00M)

Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C.

Initial lift upto 1.50m

From 1.50m to 3.00m depth

Supplying all materials labour T & P and filling foundation and plinth with river sand well watered and rammed including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per the direction of E.I.C.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalry, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials labour T & P and providing C.C. (1:1.5:3) using 12mm h.g. chips including watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T & P and providing brick work with flyash Bricks having crushing strength not less than 75kg. / c.m2 with dimensional tolerance +/- 8% including watering, curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C.

Flyash Brick work in c.m.(1:4) F & P

Supplying all materials, labour T & P and providing cement plaster on brick / stone work including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

12mm thicks C.P. (1:6)

12mm thicks C.P. (1:3) with punning

Supplying all materials labour T & P and providing rigid and smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C

Supplying all materials labour T & P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T & P and providing R.c.c (1:1.5:3) .using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C

Supplying all materials labour T & P and fixing M.S. step iron in 12mm dia M.S. steel bar and fixing into walls of septic tank duly embedded in C.C. (1:3:6) all complete as per P.H. specification and direction E.I.C.

Supplying all materials labour T & P and fixing of R.C.C. baffle wall precast with C.C. (1:1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.H. specification and direction E.I.C.

Supplying all materials, labour, T & P and providing fitting & fixing PVC Tee in wall including fitting the necessary with cement concrete (1:1.5:3) with 12mm size h.g. chips all complete including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

(a) 110mmx110mm x110mm p.v.cTee

Supplying all materials labour T&P and Providing cement flush pointing (1:3) to brick masonary including watering, curing, conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C

Filling in foundation & plinth with excavated materials, including watering, and ramming as per direction of E.I.C.

WS portion

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Stagging for 1000

Ltr. Storage Tank (1st. Floor)

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

1000Ltr. Capacity Water Storage Tank (1st. Floor)

Supplying all materials, labour, T & P and fitting & fixing 10 ltr. capacity low level flushing cystern with a pair of m.s. clamps complete with fittings such as syphonic arrangements 15mm nominal size pvc ball valve with polythene float, p.v.c. handle, union and couplings for connection with inlet, outlet and overflow pipes, 32mm dia c.p. flush bend, 15mm dia, pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C.

10Lit. P.V.C. Cistern

Supplying all materials, labour, T & P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C.

25mm dia C-PVC pipe(External)

20mm dia C-PVC pipe (Internal)

1st. Floor:-

Supplying all materials, labour, T & P cutting holes through brick / stone masonry works including making good the damages in c.m. (1:4) for taking G.I./PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.

250mm thick wall (Ground Floor) :-

Supplying all materials, labour, T & P cutting holes in RCC floors, roofs etc. up to 19 cm thick for passing G.I./ P.V.C. pipes fittings and reparing the holes after insertion of pipe etc. with c.c. (1:1.5:3) including finishing so as to make it leak proof as per direction of E.I.C.

(a) 1st. Floor:-

1st. Floor:-

Supplying all materials, labour, T & P and cutting grooves in pucca floors and walls for taking G.I. / PVC pipes and making good the damages as per direction of E.I.C.

Ground Floor:-

Supplying all materials, labour, T & P and fitting & brass/C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.

15mm dia C.P. Two way Bibcock (make-Jaguar)

15mm dia C.P.L.B. Bibcock (make-Jaguar)

15mm dia C.P. Pillar cock long neck(make-Jaguar)

15mm dia C.P. angle stop cock(make-Jaguar)

15mm dia C.P. Wall mixture(3-in-1)((make-Jaguar)

15mm x100mm dia CP shower with Arm revolving type(make-Jaguar)

15mm dia Health Faucet & 1.0m long Flexible pipe(make-Jaguar)

25mm dia U-PVC Ball Valve[Metal Ball]

15mm dia C.P. Flange

Provision for Aquaguard Aspire Spark RO+UV Hot & Ambient water purifier with Traspotation charges.

Supplying all materials, labour, T & P and fitting and fixing of I.S.I. mark 1H.P. single phase vertical water cool submersible pump set with discharge1800/2200Lit./Hour & a head-55/70mtr.of reputed make (C.R.I./ K.S.B./Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials, labour, T & P and fitting & fixing of 1.0H.P. single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials, labour, T & P and fitting & fixing of I.S.I. mark D.O.L. starter of reputed make like B.C.H. or equivalent for 1HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials labour “T& P “ and fitting & fixing of 1.5mm2 3core copper flat suitable cable having I.S.I. mark of reputed company like B.C.H./ Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials labour “T& P “ and fitting & fixing plastic rope with MS well cover, M.S. Clamp,stainless steel short piece, Bend & socket, union including all cost conveyance & taxes etc. all completes as per P.H. Specification direction of E.I.C.

Supplying all materials labour “T& P “ and fitting & fixing of H.D.P.E. pipes and pipe fittings with making connection to pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification direction of E.I.C.

32mm dia H.D.P.E. pipe

200MMX125MM SIZE BORE WELL:-

Labour for drilling and perfectly vertical bore hole of specified dia. For a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as required suit the site condition as per the direction of E.I.C. including use of own rigs with its accessories , tools & plants and consumable etc. for lowering of 125mm dia. P.V.C. pipes for housing fitted with sockets with or the necessity for soft , medium , hard and boulderwith out well screen as per formation (G.I/P.V.C.)casing pipes if required to prevent collapse over burden is to be provided by the contractor including lowrering and withdrawing after completion of the tubles as per direction of E.I.C.

Drilling of 200mm. dia. Bore “o”mtr to 40mt

Drilling 150mm dia. Bore 40 mtr to 140mtr& above

Lowering the folloing size G.I./ P.V.C. pipes with without slotted pipes as per the necessary from ground level up to 30mtrs. Depth and fitted and fixed up in perfectly vertical position including cutting, and threading pipe and slotted pipe and supply and fixing all jointing materials tools and plants etc. complete and keeping the top plugging tube wells to prevent entry of foreign materials from above

Lowring of 200 mm dia pipes

Cost of 200 mm dia P.V.C. casing pipe

.Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C

Developing the tube well

-do- .... Group B (1.1.2)

-do- .... Group C (1.1.3)

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover (1.24.2)

4 Modular box with base & cover (1.24.3)

6 Modular box with base & cover (1.24.4)

8 Modular box with base & cover (1.24.5)

12 Modular box with base & cover (1.24.6)

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MOD

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX

Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 )

-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 )

-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 )

-do- 2x6sqmm +1x2.5sqmm ( 1.8.4 )

Supply, Installation testing and commissioning of 63 Amp. ICDP Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.a)

250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICDP Main switch.

S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)

S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6

S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30)

S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28)

Earthing with G.I. earth pipe 3 metre long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required.(3.2)

Supply and laying 6 SWG G.I wire in recess for loop earthing as required ( 3.17)

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38)

S/F of Fan hok S'type made of 16mm MS rod as per specificationn

S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection ( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 18-25 watt LED Tube light fitting compoete with all connection. including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)

Supply & fixing of 12W LED Ceiling Light (S)(Make- Havells/panasonic Bajaj/philips/Wipro) all accessories.

Supply of instalation, Testing commissioning of 12 Watt. LED bulb

S/F of 15A modular socket on 2 Modular Metal box for A.C

S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL)

S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)

S/F of 1.5 Ton 3 star Inverter type split A.C. M/C with 4 KVA Voltage Stabilizer(110V-300V) (Make - Microtek, V-Guard) and AC stand with all accessories and connections and installation (Make - HITACHI/ Bluestar/ Carrier)

S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)