RO/A-D/Str/NH-37/20-21/350/1

Amount

Bituminous Concrete work

Scarifying existing btuminous surface to a depth of 50 mm by mechanical means (Scarifying the exisiting bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 mtrs

Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt,) as per clause 503 of Ministry of Road Transport and Highways specifications for Road and Bridge works(Fifth Revesion) (II) With Bitumen emulsion CSS-1 (a) Normal bituminous surface (For DBM)

Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt,) as per clause 503 of Ministry of Road Transport and Highways specifications for Road and Bridge works(Fifth Revesion) (II) With Bitumen emulsion CSS-1 (b) Normal bituminous surface (For BC)

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site,laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. (inclusive of lead from quarry to site and carriage of mixed material. )( Including cost of testing of materials at site and laboratory as directed by the deptt.) '(A) With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification) (I) with 60/7O or VG-3O grade bitumen ii' for GradingII(19 mm nominal size)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 Yo of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the requir.ed grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 509 complete in all respects) (including carriage from quarry to site and carriage of mixed material)( Including cost of testing of materials at site and laboratory as directed by the deptt.) A. With hydrated lime/cement as filler (ref er table 5OO-9 of MoRT&H specification). (I) with 6O17O or VG-3O grade bitumen ii) for Grading-Il (13 mm nominal size)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the Mort&H specifications

Providing and fixing marker with Micro Prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoRT&H fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three mos replacement warranty and free maintenance

Providing Sparkle Solar Road Studs, manufacturted by Tata B.P Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud ) with detachable battery , m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra brig LEDin amber and red colour, weight r stud 700+25 gs, flash rate of 50-65 times per minute completely water resistant and weather proof with replament warranty and free maintenance for one year from the date of installation of stud on oad-(installation shuyld be made usingadhesives and procedures erecommended by manufacturer under the suprevision of their competent technician)

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) - 90 cm equilateral triangle

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) - 60 cm circular

Maintenance of Earthen Shoulder filling with fresh soil) (Making up loss of material/ irregularities on shoulder) (Average 150 mm filling) to the design level by adding fresh approved soil and compacted it with appropriate equipment.

Providing retro reflective sign board of high intensity grade reflective sheeting conforming to ASTMD4956 BIII specifications having approved pattern over its entire surface bonded on to 2 mm thick aluminium sheeting, the entire face of the sign shall be covered & bounded with yellow/ white/red/blue high intensity grade with distinctive nod pattern on front site with heat lamp vacuum applicator machine only. - Hazard Marker

Painting Two Coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface

Repair of RCC Railing (Carrying out repair of RCC M30 railing to bring it to the original shape

Metal Beam Crash Barrier - Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m center to center, 1.8 m high, 1.1m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mmX75mmX5mm, 330mm long complete as per clause 810.)

Ram Chandra Paul

Ram Parkash Constructions Pvt. Ltd.

P K Company

Md. Matlebuddin Ahmed

Ganpati Builders

M/S G L Agarwalla

Shree Gautam Construction Co. Ltd.