REPAIRS TO ROOF TREATMENT / CLEANING OF OH TANKS / LEAKAGE AND SEAPAGE IN SUNKEN FLOORS AND OTHER RELATED WORKS IN DOMESTIC AREA AND 14 AFH AT AFA HYDERABAD

Amount

Demolition of cement concrete or surkhi filling of any description and in any position not otherwise specifically provided for roof treatment and in sunken treatment etc complete all as specified and as directed.

Stripping out existing tarfelt from roof including plaster and removing the waste material complete all as specified and as directed.

M&L for Cement concrete type B-1 mix 1:2:4 (using 20 mm graded stone aggregate) as in roof padding concerte of average 50 mm thick with liquid water proofing compound as per manufacturers instructions etc complete all as specified and as directed. Note :- WPC will be measured & paid separately under relevant Item

M & L for Cement concrete type B-0 mix 1:2:4 (using 12.5 mm grades stone aggregate) as in haunching concrete etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cm 1 : 3 mixed with liquid water proofing compound as per manufacturers instructions on concrete surfaces when PCC on roof surface is still green including finished even and fair etc complete all as specified and as directed. Note : - WPC will be measured & paid separately under relevant Item

M&L for Cleaning the roof surfaces and applying oil bound bitumen primer @ 0.20 Kg per Sqm providing and laying 4 mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centgrade, lengitudinal tensile strength not less than 800N per 5 cm teasing strenght of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch. Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqm as per manufacturer instructions complete all as specified and as directed.

Supplying and applying single component, elastomeric 100% pure polyurethane coating, Dr.Fixit Flexi PU 270 I or equivalent, which is free from bitumen & tar and meets the requirement as per ASTM C 836-18, having elongation of 400% (As per ASTM D412), Tensile strength greater than 2MPa (As per ASTM D 412), Tear strength greater than 15 N/mm (As per ASTM D 624), Water Vapor Permeability greater than 25 gm/m2/day (As per ISO 9932:91), Adhesion to concrete more than 1.5 N/mm2 (As per ASTM D4541), Resistant to plant roots as per UNE CN/TS 14416, applied with a total consumption of 2.3 Kg/Sqm to achieve a minimum of 1.5 mm system DFT to satisfy the requirements of LAM as per ASTM C898, including reinforcing the coating with 45gsm glass fibre mesh in between the coats. The coating shall be continued to the entire horizontal area and should be terminated at 300mm above FFL over the vertical surface as per manufacturers specification and methodology. The system includes base preparation of cleaning, brushing and removal of flacky materials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and priming the surface with high moisture insensitive epoxy primer Dr. Fixit Cipoxy 16D or equivalent applied with a total consumption of 200 gms/Sqm, followed by application of polyurethane coating in two coats complete all as specified and as directed. Mode of measurement - Actual area treated Protection to the waterproofing system: Supplying and applying protective geo textile fabric of 120 GSM over the entire membrane with proper overlaps.

M&L for applying one coat of solar reflective bituminous Aluminium paint over a surface of APP water proofing membrane @ 0.1 Kg/Sqm etc complete all as specified and as directed.

S&F cement concrete tiles with grey cement no pigments 25cm X 25 cm X 22mm thick machine pressed set jointed and pointed in neat grey cement slurry in floors over and including 20mm thick screed bed in CM 1:4, etc complete all as specified and as directed.

Removal of debris (aggregates) obatained from demolition including loading and unloading to a distance of 5 km from the starting point and deposited where directed etc complete all as specified and as directed.

Providing and carry out expansion joint treatment after proper surface preparation to remove loose mortars, dust, foreign particles from joints, fixing of tightly packed closed cell polyethylene based back up rod or filler board to ensure no gaps or voids exists, mask face edge of the joint using masking tape for neat finish, application of polyurethane or polysulphide sealant (width to depth : 2:1 ratio) and allow it cure for 2 days. Mixing of Two part Epoxy Adhesive using slow speed drill till get homogeneous mix, apply it to prepared joint 1-2mm thick with notched trowel or putty blade, tooled to a smooth finish and finally fixing of Flexible expansion joint (FPO Tape) membrane Dr. Fixit Seal Tape/ Hydrogapshield available in 1mm thickness and 150 mm wide exhibiting superior mechanical properties like, Elongation >500%, Tensile Strength >12N/mm2, Tear Strength >200N above joint followed by another layer of epoxy adhesives as complete as per manufacturer’s specification. Epoxy adhesive shall be applied on outer edges of tape. For joint over end laps, the overlaps surfaces must be clean, wiped and lapped with 100 mm overlap. After application the system should be allowed to cure for 7 days complete all as specified and as directed.

S & F 0.71 mm thick Plain Aluminium sheeting Alloy 31000 H4 in stepped flashing and with riveting (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and as directed.

M & L for dismantling and shifting of solar water heater of any capacity along with staging GI Stand without damaging any parts and shifting to same location after completion of roof treatment complete all as specified and as directed.

M&L for removing of plants including roots by dismantling of brick work / PCC / RCC including necessary scaffolding , any type , any location/height( roof, parapet walls near pipes etc) and spraying the affected area with solution of 25ml Glyphosphate (4% content) diluted with 1 litre of water or as per manufacturer's instructions after removing roots from wall slabs for preventing the regrowing and making good the disturbed portion using PCC 1:2:4 type B-0 with 12.5mm graded aggregate and plaster in CM 1:3 (Size of the disturbed portion 150 mm X 150 mm X 150 mm) etc complete all as specified and as directed.

M&L for Cutting out V groove on cracks of walls and cleaning out, wetting, grouting with crack filler (Dr Fixit or equivalent) mixing with cement slurry, making good the surface by using CM 1:3 or PCC 1:2:4 type B-0 as required at site, as per manufactures instuctions, of any description and in any position, with necessary scaffoldings, complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1 : 3 on fair faces of brick or concrete surfaces mixed with water proofing compound finished even and smooth in sunken portion without using extra cement etc complete as specified and as directed.

M&L for primming the surfaces and applying normal treatment & laying 3 mm thick APP membrane and fixing by torching and applying evenly a tack coat of bitumen 85 / 25 @ 1.20 kg / sqm for sunken treatment including providing a GI pipe of 40 mm dia light grade spout projecting atleast 200 mm from external wall etc complete all as specified and as directed.

M&L for PCC (1:5:10) type E-2 mix using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

M&Lfor laying PCC (1:2:4) type B-2 mix using 40 mm graded aggregate in floors / sub base of 75 mm average thick and finished fair and even etc complete all as specified and as directed.

Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed.

Taking down cement plaster in wall / ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

M&L for half brick work with sub class 'B' old size bricks, straight or curved on plan, to any radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for plastering in internal wall surfaces of 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for plastering in external wall surfaces of 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) with water proofing compond complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces as ceilling finished even and smooth (without using extra cement) complete all as specified and as directed.

M & L for two coats of oil bound distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats white wash etc. complete all as specified and as directed.

Supply Only Liquid water proofing compound complete all as specified and as directed.

Taking up or down GI tubing of 15 mm bore and connectons etc complete all as specified and as directed.

Taking up or down GI / PPR tubing of 20 mm bore and connectons etc complete all as specified and as directed.

Taking up or down GI / PPR tubing of 25mm bore and connectons etc complete all as specified and as directed.

Refixing old GI tubing of 15 mm bore and connections in new or old position fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

Refixing old GI tubing of 20 mm bore and connections in new or old position fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

Refixing old GI tubing of 25 mm bore and connections in new or old position fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

S & F GI tubes of 15 mm dia medium grade with all fittings and fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

S & F GI tubes of 20 mm dia medium grade with all fittings and fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

S & F GI tubes of 25 mm dia medium grade with all fittings and fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

S & F 3-layer PP-R Polypropylene random copolymer) 25 mm dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

Refixing old 3-layer PP-R Polypropylene random copolymer) 75 mm dia concealed pipes and connections in new or old position fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and as directed.

M & L for Non - skid coloured ceramic tiles, 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tilesincluding Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and as directed.

M&L Dark shade / Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and ointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge. complete all as specified and as directed.

M&L for glazed ceramic tiles coloured of size 350 x 250 x 7 mm / 450 X 350 X 7 mm thick as on walls over jointing in neet slurry and pointing in coloured cement to match the inside of tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed complete to walls or laid in floors complete all as specified and as directed.

S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap set and connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and as directed.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs Plastic water closet seat cover, black, closed pattern with flat bottom. and cover and mild steel chromium plated or aluminium hinged device etc complete all as specified and as directed.

S&F in repairs of Vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and as directed.

S&F in Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed.

Supply Only of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed.

S&F in repairs of CP Bib taps 15mm bore cast copper alloy with capstan head fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs of fancy type Bib tap standard of PTMT 15mm high pressure screwed for iron pipe and fixed. (Minimum weight 15mm- 105 gms). complete all as specified and as directed.

S&F in repairs of Angle cock of 15 mm dia cast copper alloy with capstan head fancy type chromium plated etc complete all as specified and as directed.

S&F in repairs of concealed stop valves 15 mm dia casr copper alloy fancy type chromium plated with long shank and cup screwed down, high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed.

S&F in repairs of stop valves 15 mm dia cast copper alloy fancy type CP and capstan headscrewed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed.

S&F in repairs of Gun metal globe or gate valves/ Non returning Valve of 20 mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs of Gun metal globe or gate valves/Non returning Valve of 25 mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) etc complete all as specified and as directed.

S&F in repairs of Ball valve 25 mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 455gms) etc complete all as specified and as directed.

S&F in repairs of ABS chromium plated shower rose LONG ARM with or without swivel joint any size including fixing to steel pipe or union, of size 125mm in repairs complete all as specified and as directed.

S&F in repairs of PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets and long flush band etc complete all as specified and as directed.

S&F in repairs of PVC connection 15 mm size with brass CP nuts of length 450 mm complete all as specified and as directed.

S & F in repairs of Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 ltrs complete all as specified and as directed.

S & F in repairs of Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 1000 ltrs complete all as specified and as directed.

S&F in repairs of Lids for Rotational moulded PVC water storage tank of 250 to 2000 ltrs capacity fixed in position all as specified in SSR part – I. complete all as specified and as directed.

S&F in repairs Nipple / flange 20 mm suitable for HDPE water tank (Minimum weight 45 gms) complete all as specified and as directed.

S&F in repairs Nipple / flange 25 mm suitable for HDPE water tank (Minimum weight 65gms) complete all as specified and as directed.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F in repairs of Brass CP wall mixer 'hot' & cold water scrwed down for iron pipe etc complete all as specified and as directed.

S&F in repair of centre hole basin mixture 15 mm bore dia with fancy type heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs of towel ring 150 mm dia type ABS body chromium plated fixed with and including Chromium plated brass screws complete all as specified and as directed.

S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and as directed.

S&F in repairs brass chromium plated towel rail 600 mm long "D" type fixed with suitable steel screw etc complete all as specified and as directed.

S&F in repairs Soap dish, stainless steel and fixed to wall complete all as specified and as directed.

S&F in repairs toilet paper holder coloured vitreous china box type complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S& F in repairs of Vitreous China urinals, half stall type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and as directed.

S&F in repairs of stainless steel grating 100 mm dia without hole complete all as specified and as directed.

S&F in repairs of stainless steel grating 100 mm dia with hole complete all as specified and as directed.

S&F in repairs of sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x160 mm etc complete all as specified and as directed.

S&F in repairs of Vitreous China Pedestal type EWC with attached flushing cistern, white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. . Make : - Cat Part No S1021116,S1060113,B1810107 candid full set of CERA or equivalent make approved by GE.

S&Fin repairs of CP Bib taps two way in one 15 mm cast copper alloy fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs of ABS body CP health faucet complete set including holder stand and one metre PVC pipe, 15 mm cast copper alloy screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. Make :- CERA Cat Part No 8030101.or equivalent approved make.

S&F in repair Stainless Steel Dish / plate Display Rack of size 750 mm x 600 mm x 250 mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rowel plugs amd brass screws at suitable places, etc complete all as specified and as directed. Make :- Prayag, Cat No: P-330 or Silver shine, Cat No: SSKPR-311 or any Equivalent make as approved by GE.

S&F in repairs glass corner/ mirror shelves size 300 mm /450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and as directed.

S&F in repairs PVC Cabinet of size 600 mm x450 mm with necessary fittings and hinges complete all as specified and as directed.

Disconnecting existing tanks setting aside and hoisting of PVC water tank of capacity exc 250 & n exc 500 ltrs including cleaning and removing all scale & dirt, etc from tanks, required reconnecting with necessary GI fittings as per site requirements and re- fixing in same position and also writting date of cleaning and due date of cleaning using enamel paint etc complete all as specified and as directed.

Disconnecting existing tanks setting aside and hoisting of PVC water tank of capacity exc 500 & n exc 1000 ltrs including cleaning and removing all scale & dirt, etc from tanks , required reconnecting with necessary GI fittings as per site requirements and re- fixing in same position and also writting date of cleaning and due date of cleaning using enamel paint etc complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litresand write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 1000 and n exc 2000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 110 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 75 mm bore pipe complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (Single Y) equal or unequal 110 mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius with access door suitable for 75mm bore pipe complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (Single Y) equal or unequal 75 mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) reducer 110 mm dia complete all as specified and as directed.

S&F in repairs of cast iron Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and as directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia bore of pipe complete all as specified and as directed.

Demolition of reinforced cement concrete chimneys, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in kitchen flatform and selfs in kitchen slabs, etc including necessary form work , complete all as specified and as directed.

M&L for MS TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long complete all as specified and as directed.

M&L for Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but not exc one brick complete all as specified and as directed.

M & L for MS flat iron hold fast. Conforming to Fe-290 Gde E-165 complete all as specified and as directed.

GUTHIKONDA BROTHERS

Saiansh Associates

SRI RAM CONSTRUCTION

S J REDDY