Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹5.0 L+₹49,685.93 (11.0%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹5.2 L+₹69,232.10 (15.4%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹5.3 L+₹75,550.26 (16.8%)Rejected-Finance | L4 | Rejected-Finance Rejected |
Tender Value
₹8.1 L
EMD Value
₹16,250
Closing Date
29 Jul 2021, 11:00 amClosed
Executive Engineer Jal Shakti Division Arki
Executive Engineer Jal Shakti Division Arki
Remodelling of GWSS Kotlu in GP Bhumpti in Tehsil Arki Distt. Solan HP (SH- C/O RCC Sectoral storage tank 5000 liters capacity at Node F, 5500 liters capacity ant Node G and L/J of GI pipe (L) of various dia in distribution system).
2021_HPIPH_50272_1
3925-74 dated 22-07-2021
Open Tender
Civil Works
Item Rate
180 days
Bhumpti
Please refer Tender documents.
7 documents required · 7 mandatory
₹250
Yes
₹16,250
Yes
10 Sept 2021
23 Jul 2021
29 Jul 2021
23 Jul 2021
29 Jul 2021
23 Jul 2021
23 Jul 2021 - 29 Jul 2021
Amount
Excavation in foundation, trenches etc. earth work in all type of soil such as pick work, jumper work, blasting work kankar,moorum singles including decomposed soft and hard rock etc. upto all heights stacking the excavated earth not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths and sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth upto all leads and lifts as directed by the Engineer in charge complete in all respects.
Providing and laying cement concrete 1:3:6(1 Cement :3 Sand : 6 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including all carriage of materials upto all leads and lifts complete in all respects.
Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in.
Foundations , footings bases of column and the like and mass concrete i/c all leads & lifts etc. complete in all respects.
Walls any thickness (but not less than 0.10meter thickness including attached pilasters,buttresses plinth and string courses etc. from top of foundationlevel upto floor two level including all leads and lifts etc.complete in all respects.
Providing form work with mild steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu reinforced concrete work and plain concrete work in :-
Flat surfaces such as soffits of suspended floors, roofs , landing and the like ,i/c all leads and lifts, complete in all respects.
Vertical surfaces such as walls(any thickness )partition and the like including attached pillasters, buttresses plinth and string courses and like including all leads and lifts etc. complete in all respects.
Providing and laying cement concrete work 1:2:4(1 Cement :2 Sand: 4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work & reinforcement for reinforced concrete work in :-
Suspended floor, roofs landings shelves and their supports, balconies, beams, girders, bressumers and cantilevers up to floor two level including carriage of materials with in all leads and lifts, complete in all respects.
Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects.
Manufacturing, supplying & fixing of M.S frame 35x35x5mm with M.S sheet man hole cover 1.66mm thick made of M.S Angle 25x25x5mm with locking arrangement with lock and painting with red oxide complete in all respects as per drawing & design with in all leads & lifts complete & as per the direction of the Engineer-in Charge.
Laying and Jointing GMS tube (Light class) of various dia for scour , over flow, outlet , inlet , ventilating pipe including all carriage of materials upto all leads and lifts complete in all respects.
20 mm dia inlet & over flow pipe.
25 mm dia inlet, outlet & over flow pipe.
32 mm dia Scour & outlet pipe.
40 mm dia scour pipe.
50 mm dia vent pipe.
Laying and jointing in trenches G.I pipe (Light class) tube fittings & commissiong testing at site (earth work in trenches to be measured and paid for separately) including all carriage of materials up to all leads and lifts complete in all respects.
15 mm dia.
20 mm dia.
25 mm dia .
Providing and fixing gun metal wheel valve of superior quality including all leads and fifts complete in all respects.
15 mm dia
20 mm dia
25 mm dia
32 mm dia
40 mm dia.
RISHI DEV SHARMA
nishant gupta
M/s.Chetan Thakur
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .