PROVN OF SEWAGE TREATMENT PLANT 300 KLD CAPACITY AT BIKRAM ENCLAVE AT UDHAMPUR UNDER GE (P) UDHAMPUR

Amount

Total Amount of Sch 'A' Part - I (Building Works)

Total Amount of Sch 'A' Part - II (Site Clearance)

Total Amount of Sch 'A' Part - III (Plumbing Works)

Total Amount of Sch 'A' Part - IV (Internal Water Supply)

Total Amount of Sch 'A' Part - V (Internal Electrification)

Total Amount of Sch 'A' Part - VI (Sewage Disposal)

Total Amount of Sch 'A' Part - VII (Path works)

Total Amount of Sch 'A' Part - VIII (Area Drainage)

Total Amount of Sch 'A' Part -IX (Security Wall with Gate works)

Total Amount of Sch 'A' Part - X (Protective works (RR Masonry))

Total Amount of Sch 'A' Part - XI (Protective works (RCC Retaining Wall))

Total Amount of Sch 'A' Part - XII (External Electrification & water Supply Works for STP))

Sch 'A' Part - XIII (Misc Items work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.

Design, Supply, Installation, commissioning and testing of Sewage Treatment Plant (STP) based on principle of aerobic attached growth non clogging randomly Moving Bed Bio-Reactor (MBBR) having capacity 300 Cum per day with all civil works for STP, including the following so as to achieve the parameters mentioned elsewhere in the tender documents from any one of the following OEMs :- (a) M/s Nitasha Constructions . (b) M/s Optimus Enviropro Pvt Ltd. (c) M/s THERMAX LIMITED. (d) M/s Sophisticated Industrial Materials Analytic (SIMA) Labs Pvt Ltd. (e) M/s Hydrotech Paryavaran (India) Pvt Ltd. (f) M/s Sombansi Enviro Engg Pvt Ltd (SRRPL). (g) M/s Ion Exchange (India) Ltd (h) Any other OEM firm approved by E-in-C’s MES up to the date of receipt of Tender. (a) 03 (02 W + 01 S) Raw Sewage submersible pumps at wet well. (b) 01 No receiving chamber. (c) 01 No fine bar screen chamber in RCC construction with bar screen MS epoxy painted. (d) 01 No wet well. (e) 01 No stilling chamber. (f) 01 No Oil & Grease chamber in RCC construction.

Srl Item No 13.01 Contd) (g) 01 No equalisation tank in RCC construction (retention time minimum 06 Hrs) (h) 02 Nos sewage pumps at EQT (j) 01 No Lot of air grid of PVC/HDPE for equalisation tank. (k) 05 Nos Air Blower (04 working + 01 standby) (l) 02 Nos MBBR reactor tanks in RCC construction with media, SS Air Grid & rise pipes. (m) 01 No Tube Settlertank in RCC constructin with tube media. (n) 02 Nos (01 each for CCT And TWT) Hypo solution tanks. (o) 01 No hypo solution dosing pumps. (p) 02 Nos filter feed pumps. (q) 01 No dual media filter with media and tank in MS bituminious paint. (r) 01 No Activated carbon filter media and tank in MS bituminious paint. (s) 01 No Chlorine contact cum filterfeed tank in Rcc construction epoxy paint. (t) 01 No Treated Water Tank in Rcc construction. (u) 01 No Electrical distribution board for STP operation. (v) 01 set of necessary valves, pressure guages, level control switches, piping and instrumentation.

Srl Item No.13.01 (Contd) (w) 01 set of cabling to interconnect STP panel with various drives. (x) 01 no Sludge Sump in RCC construction. (y) 02 Nos Sludge feed pumps. (z) Necessary foundation for electromechanical equipments (aa) 01 set of DWPE Dosing system (ab) Filter Press - 02 (ac) 01 Set of Chlorine dosing system. Note : (a) This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only. The contractor work out his price based on design data specified in the tender documents. (b) Parameters for treated sewage effluent for the designof sewage treatment plant are as given below :- Input Parameters BOD : 195 mg/ ltr COD : 421 mg/ltr PH :6.82 Coliform Coumts/100ml :1000000 -10000000 TSS : 218 mg / Ltr Treated Waste WaterQuality BOD :< 10 mg/ ltr COD : < 150 mg/ltr PH : 7-8 Outlet Coliform : < 100 counts/100ml Residual chlorine : < 0.5 mg/ltr TSS : 10 mg / Ltr Peak Factor : 04 Peak Hrs : 03 hrs morning and 02 Hrs evening

Srl Item No.13.01 (Contd) (c) All water retaining structure are to designed and costructed with M-30 concrete. (d) The specifications and the capacities of various items given in particular specification under heading "Technical Specifications" are for indication only . If as per the tenderer's design, higher capacities are required, the same shall be provided without any extrra cost to Govt. However minimum parameters are to be achieved as indicated above. (e) The contractor has to give two years warranty for the sewage treatment plant from the date of completion. (f) The contractor has to give minimum 15 years guarantee for MBBR membrane from OEM. (g) All bus bars shall be copper (h) All MS and RCC tanks shall be covered with GI wire 4mm dia size of mesh 75x75mm chain link wire mesh. The wire mesh shall be fixed with GI nuts and bolts of suitable size to 50x50x6mm MS angle iron fram fixed over the tank wall. the size of angle iron frame shall be as per size of various tanks specified. The frame shall be fixed to tank wall with suitable size of FI hold fast as directed by GE.

Outsourcing of manning and Operation of sewage treatment plant in (03) Three shifts per day of 08 hours each (1st shift starting from 0600 to 1400 hours, 2nd shift from 1400 to 2200 hours & 3rd shift 2200 to 0600 hours) by deploying one experienced skilled operator in each shift for Bikram Enclave STP (1 x STP 300 KLD). The Operators to be present daily, scop of work will be as described in notes given below complete all as specified and as directed. NOTES:- Quoted rate shall include the aspect mentioned below.

Rates quoted by contractor shall be deemed to be inclusive of all taxtes, including GST, LWC, IT etc or duties, royalties, Octroi and other devices payable under the respective statutes.

Scope of work for Comprises (i) Stacking the sludge cakes properly. (ii) Cleaning the blockages in any pumps/ pipe lines. (iii) Supplying / distributing the treated water regularly as per the directions. (iv)Complete cleaning of grits and channels daily. (v) Brooms and cleaning materials will be arranged by the contractor. (vi) During the cleaning safety equipments will be supplied and arranged by the contractor. (vii) Removing the algar / sludge in the tube settler and keeping the surrounding area clean. (viii) Mixing of chemicals as directed. (ix) Daily, weekly, monthly, quartly, half yearly & Yearly maintenace of equipments. (x) All consumable chemical required for STP shall be supplied by the contractor. (xi) Fuel & lubricant for running of DG set shall be provided by the deptt.

Srl Item No.13.02 (Contd) EQUIPMENTS TO BE MAINTAINED :- (i) Bar screen chamber (ii) MBBR reactor (iii) Air blower (iv) Tube settler (v) Filter feed pump (vi) Filtration system (vii) Feed pump and raw water sewage pump (viii)Inter connecting pipe (ix) Chlorine contact tank / hypo Dosing Tank (x) Valves (xi) Sludge dring bed (xii) Electrical system DB/ Panel (xiii)Oil and grease trap (xiv) Raw water collection sump (xv)Installed machinary for treated water supply (xvi) Treated water tank installed with STP (xvii) Mixing chemical as required (xviii) Sewage well with pump (xix) Dg set.

Maintaining the following records :- (i) Record of chemical construction (ii) Record of treated water and electricity consumption (log Sheet) (iii) Record of DG Set daily running (Log Sheet) (iv) Record of water meter reading. Log Sheets to be provided by the Contractor.

Contractor shall ensure that trated sewage water shall confirm to the following characteristics :- (i) Total Suspended solids : < 10 mg/ ltr (ii) Biological Oxygen Demand :< 10 mg/ltr (iii) Chemical Oxygen Demand : 150mg/ltr (iv) ph : 6.5-8.5 (v) Total coliform :< 100MPN/100ml (dsired Nil) (vi) Residual CI : < 1 mh/ltr (vii) Contractor shall supply chemicals required for maintaining above mentioned characteristics of treated water and the same are deemed to be included in the quoted rate. (viii) Fuel for running of DG set will be supplied by the Department.

Srl Item No.13.02 (Contd) (ix) Cost of normal maitenance and material required for greasing, cleaning etc. Shall be deemed to be included in the item rate quoted by the contractor. (x) Timing of shifts shall be as directed by Engineer-in charge and shall have no claim on this account. (xi) The contractor will ensure suitable replacement of workmen employed by him while are on leave/weekly holidays and Wages for the same deemed to be included in the quoted rate against each item here-iv- before. (xii) The contractor shall ensure that operator will always be present in each shift. (xiii) The contractor shall be responsible for maintaining the complete area (ie inside boundary wall) such as building, hard standing, footpathetc in neat and clean position. all necessary T & P for cutting/ cleaning of grass and vegitation will be arranged by contractor with out any extra cost. (xiv) The contractor shall provide uniform, raincoat, protective clothing such as hand gloves, helmet, safety belt, first aid box and shoes etc to all personson duty and the cost of the same is deemed to be included in quoted rate of item here-in before. The uniform shall have the name of the contractor and MES writtenon the shirts pocket(Left and right side).

Srl Item No.13.02 (Contd) The name of individual shall also be printed on the right hand side of the shirt. (xv) the contractor shall provide Log sheets and maintain the same on daily basis and the cost of thr sameis deemed to be included unit rate quoted here-in-before. (xvi) The contractor shall produce details of the individual like Name, Aadhar No, Aadhar linked Bank A/c No. Experience certificate within a week of Acceptance of Tender for verification of GE. The work will be commenced only after submission of requisite documents of the individuals. (xvii) The contractor shall make payment to his staff employed for this work every month, accounted for, from the date of commencement of work and submit to the Engneer-in-Charge for verification of Bank statement/individual's pass book as a proof of payment,if the contractor fails to submit the Bank statement/individual's pass book with in 07 (seven) days of due date of payment a penalty of Rs 2000/- per day shall be trcovered from the contractor.

MCB, single pole, 6 to 32 Amp, `C' series, 10KA, 240 Volt, complete all as specified.

MCB, single pole and neutral, 6 to 32 Amp, `C' series, 10KA, 240 Volt, complete all as specified.

LED tube light 18/20/21 Watt, 4 feet with LED tube rod integrated type lP20, lumen output>95lum/w, color temp 5700-6500K, CRI>80, THD<20%, PF>0.9, operating voltage 140-270V, extruded aluminum housing in poly carbonate cover body with all accessories prewired and connecting electrically to ceiling rose, complete all as specified and directed. Make: Crompton Cat Part No. LCTL-18-CDL or technically and commercially equivalent models of Philips/Bajaj/Wipro /GE/Syska/ Surya/Havells as approved by the GE.

LED bulb, B22 base, 9/10 watt, lumen output> 420lm , 3000K Color temp, PF>0.9, THD< 20% suitable for lamp holder complete all as specified and directed Make: Havells or technically and commercially equivalent models of Philips/Bajaj/Wipro/GE/Syska/Surya/Crompton as approved by the GE.

Ceiling fan of 1200mm sweep, 5 star rated ( as per BEE recommendations), suitable to work on single phase, AC 230 volts, 50 hz supply complete with and including down rod , PVC insulated and overall sheathed 3 core flexible copper conductor cable of size 23/0.0076 size from ceiling rose to ceiling fan and testing complete all as specified and directed.

Exhaust fan 300mm sweep with louvers, 1400 RPM, 230 volts (single phase), electrically operated 50 Hz, heavy duty metallic body complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed.

45 Watt, lP66 LED street light luminaries comprising of Die case aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 100 Lum/ watt, lumen maintenance> 70 % at 50000 hrs, color temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test compliance. The driver must be integrated APFC with short circuit protection, reverse polarity protection against 5KV high surges and comply with IEC 60598-1, IEC-61000-3-2, IEC 61547. The luminaire must have secondary optics with perfectly matched lens for better light control with and including brackets made of GI pipe of suitable dia light grade, bend to shape at an angle of 65 degree not less than 1.2mtr long with 2 Nos. of M.S clamp fabricated out of MS flat of size 50 x 6 mm on pole, including nuts, bolts, washers etc and making electrical connections with twin core twisted copper conductor flexible copper wire of of 2.5 Sqmm size passing through and including PVc conduit of size 20mm dia with suitable clamps/fixtures from street light to junction specified and as directed. Make: Crompton Cat Part No. LSTP-45-CDL or technically and commercially equivalent models of Philips/Bajaj/Wipro/GE /Syska/Surya as approved by the GE.

Steel tubular swaged pole complete with base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-31 (9m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including numbering with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed (PCC, earth work shall be measured & paid separately under respective items).

LED street light fixture 60 watt LED with pressure die Cast , aluminium housing with toughened glass having IP-66 degree of protection, individual LED's must have secondary lense for better throw across and along the road, with system luminarie > 100 lumen/watt,colour rendering index (CRI) of >70, co-related colour temperature (CCT) of 5700 . Luminiare should have surge protection upto 5 KV and having additional surge protection upto 10 KV for driver, PF > 0.9 and THD < 10% (Make of LED chip shall be CREE/NICHIA/OSRAM/LUMILEDS), operating voltage range from 140 to 270 volts, The potted driver used shall be a constant current, constant voltage based and ISI marked all as per BIS -15885 Pt- 2/sec-13 with efficiency > 85 % . Make of driver shall be same as the make of fixture complete all as specified and directed. Make : Crompton Cat Part No LSTP-60-CDL or technically and commercially equivalent model of Philips/Bajaj/Wipro/GE/Syska/Surya as approved by GE.

Loop in/loop out cable junction boxes IP 66 '"halogen free and weather proof" for outdoor installation made out with thermoplastic of size 205x255x110mm (outer dimensions) with one number MCB SP 06 Amps capacity, alongwith aluminium bus bar 4 Nos& provn of external fastening with metric knockouts for cable intry & outgoing connection for security lights etc all as directed and fixed to the poles with mild steel flat of size 25 mm x 4 mm, complete all as specified and directed. Make: Hensel Cat Part No. KF2525 or technically and commercially equivalent models of Sintex/HPL/L&T

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 2 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

Supplying, fixing, installing, testing and commissioning of monoblock centrifugal pumping set having discharge of 250 LPM at 50 mtr head electric driven 3 phases 50 Hz 415 Volt comprising of the following :- (a) PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in foundation including foundation bolds and nuts as recommended by the manufacturer. (b) MS Channel for pumping sets base frame as per manufacturers design (c) Copper cable of suitable size from starter to 3 phase motor in PVC flexible conduit.

Supply ,installation, testing and commissioning of LT main distribution panel board cubical outdoor type made out of 3.15 mm thick mild steel sheet of factory made, epoxy powder coated with CPRI type tested, totally enclosed weather, dust & vermin proof having IP -54 protection, single door system and fabricated on MS hinges, clamp, nut & bolt or drilling, bending and welding hot & cold etc and necessary locking arrangement on both side door for 3 phase 4 wire 433 volt grade 50 HZ AC supply system including consisting of mounting channels, with all fixing accessories including aluminium thimbles of appropriate size. The panel should be fitted on angle iron frame of size 50x50x6 mm including grouted PCC 1:2:4 type B1 platform for resting panel of equal to size of panel with 50mm offset on all sides and overall depth 450mm (300mm above GL + 150mm below GL)all as directed by Enqr-in-charge comprising of following :- Make- HensalABB/L&T Note:- 1. MCCB handle should be operated without opening the front gate. 2. The contractor shall get the drawings of panel approved by the GE before giving order to the manufacturer. (a) Change over switch 4 pole 100 Amp - 1 No (b) MCCB FP/TPN 160 Amps 50 Hz 415 volt, 25 KA -01 No (for incoming) Make-Seimens/Legrand/Schiender/ABB (c) MCCB TP 100 Amps 50 Hz 415 volt, 25 KA -01 No (for out going) Make-Seimens/Legrand/Schiender/ABB (d) MCCB TP 63 amps 50 Hz 415 volt, 16 KA -01 No (for out going) ) Make-Seimens/Legrand/Schiender/ABB (e) MCB SPN 40 Amps 50 Hz 230 volt -03 Nos Make-Seimens/Legrand/Schiender/ABB

(srl item 13.15 contd) (e) -------Blank-------- (f) Street light Timer switch including the followings :- (i) Street light time switch multi functional digital for automatic switching ON & OFF of street lights at a preset time model Astrorex 0-21 of make Legrand/ L&T/ ABB - 01 No (ii) Toggle switch 5 amps 230 volts for auto/manual operation - 01 No (iii) Bakelite fuse base and carrier with HRC fuses, 40 amps, 230 V - 06 Nos Make :L&T/ABB/AE/Legrand (iv) Bakelite fuse base and carrier with HRC fuses 4 amps 230 N -02 Nos Make :L&T/ABB/AE/Legrand (v) Prewired with copper conductor including copper thimbles as required for connections. (g) 3 Ph Multifunction Meter, Model A, class 1, 5A conforming to cat part No. WDM303FDWA1 of L&T or equivalent of make C&S/AE-01Nos complete with CTs of appropriate ratio all as required at site or directed. (h) LED indicator lamp - 03 Nos (i) Internal wiring with suitable size of copper multistranded PVC sheathed cable. U) Aluminium bus bar chamber (4 Strips) 3 phase 415 volts 300 Amps fixed on insulators all as required - 01 Set (k) 24 Hrs Digital timer- 01 No. (l)Internal wiring inc all aceesssories , earth strip, sleeves, Ferrules, dinrail, neutral link etc. with suitable size

Supply, install, commissioning & testing of diesel engine driven generating set complete with acoustic enclosure and control system for 40 KVA/32 KW output at site, AC 415 volts, 50 C/S, 3 phase 4 wire directly coupled complete with self starting system including accessones. equipment control panel etc. as per BS/IS-5514/10002, Silent Diesel Generating set comprising of CUMMINS make engine model -X2 7TAAG2 - Water cooled at 1500 RPM coupled to 415V, 3 Phase Stamford make alternator mounted on a common Base frame along with other accessories i.e AMF Panel, Fuel tank, Batteries with leads and Silencer etc. (a) Alternator 25 KVA output at 0.80 PF, AC 3 phase 4 wire 415 volts 50 C/S, brush less, self excited, self regulated, screen protected drip proof type with two end shield ball/Roller bearing with damper winding in each pole faces, class 'H' insulation with IP-23 protection and Voltage regulation ±1.5 % as per IS-4722 or BS 2613-1970 all as specified and directed Make: Kirloskar/Crompton/Stamford. (b) Control panel :- The standard control panel consisting of control cubical fabricated sheet steel construction indoor type suitable for the followings :- i) Gen set controller microprocessor based multifunctional with LED display for engine water temperature, lub oil pressure, Engine RPM, Engine shut down display, total Hrs run and suitable for protection against high water tempertaure, low lub oil pressure, over speed and battery charger failure.

(srl item 13.16 contd) ii) Digital multi functional meter with LED display suitable to display all electrical parameters of individual phase such as Voltage, Current, frequency, KVA, KW, power factor and having RS 485 communication port complete with appropriate CTs and control wiring. (c) Electric starter equipment :- The equipment will comprise the followings- (i) Maint free Battery duly initial charged & Battery lead of adequate capacity : Make of battery AMARON/Exide/Microtek (ii) Starter motor (iii) Starter gearing (iv) Start/stop push button (d) DG Set should be suitable derated as per Udhampur condition. (e) PCC foundation for DG set all as per manufacturer recommendation or required at site

Brick masonry valve pit built in cement mortor 1:4 of size 60cmx60cmx60cm (internal dimensions) including excavations and earthwork in any type of soil, 10 mm thick plastering in cement mortor 1:4 to all wall surfaces internally and externally as the work proceeds complete including angle iron 40x40x5 mm frame, MS sheet cover 3.15mm thick with 12 mm dia 150 mm long MS handle, locking arrangement and painting with two coats of synthetic enamel paint over a coat of red oxide, primer complete all as specified and directed.

Cutting of existing road/ path or PCC hardstanding of suitable width and depth for laying of pipe and getting out the excavated material and filling and making good with PCC 1:2:4 type B1 after laying the pipe complete all as specified and directed.

150mm bore, DWCPE (Double wall corrugated polyethylene) pipes BIS:16098 (Part-II): 2013, laid jointed complete with collars on concrete bed including testing, complete all as specified and as directed. Note: Excavation, earthwork and concrete bed shall be measured and paid for seperately under respective schedule .MAKE :- Supreme / Prince / Jagannath Industries / Keshav kripa Polyplast / Astral

200mm bore, DWCPE (Double wall corrugated polyethylene) pipes BIS:16098 (Part-II): 2013, laid jointed complete with collars on concrete bed including testing, complete all as specified and as directed. Note: Excavation, earthwork and concrete bed shall be measured and paid for seperately under respective schedule. MAKE :- Supreme / Prince / Jagannath Industries / Keshav kripa Polyplast / Astral

250mm bore, DWCPE (Double wall corrugated polyethylene) pipes BIS:16098 (Part-II): 2013, laid jointed complete with collars on concrete bed including testing, complete all as specified and as directed. Note: Excavation, earthwork and concrete bed shall be measured and paid for seperately under respective schedule. MAKE :- Supreme / Prince / Jagannath Industries / Keshav kripa Polyplast / Astral

300mm bore, DWCPE (Double wall corrugated polyethylene) pipes BIS:16098 (Part-II): 2013, laid jointed complete with collars on concrete bed including testing, complete all as specified and as directed. Note: Excavation, earthwork and concrete bed shall be measured and paid for seperately under respective schedule. MAKE :- Supreme / Prince / Jagannath Industries / Keshav kripa Polyplast / Astral

Precast plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in kerb stone (FACTORY MADE KERB STONE) and the like with plain fair faces including chamfers, weathering etc., embedding in position including necessary earthwork and setting in cement mortar 1:4, size of kerb stone 30cm high, base 30cm x 10cm and top 30cm x 5cm, complete all as specified and as directed.

Razor wire 2.5mm core wire, heavy gavanised (wire-275 GSM & strip-200 GSM), tensile strength of wire-1400-1500 N/Sqmm, weight 6-8Kg/coil, stretchable length- 6m to 8m including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete, all as specified and as directed. (Note: The concertina coil shall have minimum 10 loops per RM when stretched) Make: M/S Global Engg/ M/S Special steels Ltd/ M/S Super Fence/A1 Fence.

Deduct Schedule of Credit materials of Rs (-) 54,350.00 (Minus) as listed in Schedule 'A' Part-XV Lumpsum contract sum shall be arrived at after deducting the credit schedule amount. Note: Tenderers will not quote against this item being a firm amount.

SHIV CHARAN GUPTA AND SONS

RYSA INFRATECH PRIVATE LIMITED

TRIVENI CONSTRUCTIONS

Shekhar Enterprises

M/s R. K. Bhambri