SPL REPAIRS TO E/M INSTALLATION BLDG NO. P-163 AND P-389, PATH/ HARDSTANDING, BOUNDARY WALL AND DRAIN ETC PHOOLA ROAD CHATRI CHOWK AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Taking down cement plaster of any description on brick/ stone wall including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for 10mm thick rendering in cement mortar (1:6) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed

Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour for 5mm thick in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour preparation of new plastered surface of ceilings and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of ceilings including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for complete removal of existing treatment from wall surface and applying two coats of cement base paint complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed

Material and labour for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed & directed.

Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 6-7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but n. exc. 0.18 Sqm as in vertical surfaces such as skirting/ dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 10mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per srl item No. 19.00 here-in-before but except bricks

Material and labour for brick work with fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

Demolition of cement concrete (reinforced) in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed.

Material and labour for providing precast reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chaajas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

All as per srl item No 24.00 here-in-before but 5mm dia and over upto and including 10mm dia inserting, spacers and binders

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed.

Material and labour for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc complete all as specified and directed.

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed. Make : Asian Paints/ STP/ Sikka

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Make : Asian Paints/ STP/ Sikka Note : Application should be done with Graco sprayer by a company authorised applicator.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fixing steel window (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters including box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handleSupply and fixinglat iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), complete as per Drg No. CEJZ/WD-1655/22 & CEJZ/TD-1019/08 sheet 1/3 to 3/3. Note : The above rate for glazed and gauged shutter window and measured one time clear opening for payment of window

Supply and fixing steel ventilator (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters including box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handleSupply and fixinglat iron etc and fixed with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), complete as per Drg No. CEJZ/WD-1655/22 & CEJZ/TD-1019/08 sheet 1/3 to 3/3. Note : The above rate for glazed and gauged shutter ventilator and measured one time clear opening for payment of ventilator

Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing Prayag Syment tower bolt 150mm long all as specified and directed.

Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated concrete/brick surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.

Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour for 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour for 25mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Supply and fixing in repair Body Bib Cock (Foam Flow) with Flange, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing stop valves 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified

Supply and fixing in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mm x 440mm fixed including provision of lime concrete bedding and 'P' trap and breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified and directed

Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing cistern complete all as specified.

Supply and fixing one piece wash basin with pedestal of size 565mm x 430mm x 845mm of any colour complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.

Supply and fixing in repair new flexible PVC waste pipe of approved quality 25mm bore, 75cm long with one end socketed fixed to waste coupling complete all as specified and directed

Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.

Supply and fixing in repair mild steel CP grating 125mm dia with centre hole complete all as specified and directed.

Supply and fixing in repairs sheet glass shelf 500 x 125mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.

Supply and fixing in repair brass towel rail fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed

Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.

Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes/ sewage pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for re-fixing or removal to store complete all as specified.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors and walls 110 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors and walls 75 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single ‘T’) 110mm bore all as specified and directed.

All as per Ser item No 75.00 above but 75mm

Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.

All as per Ser item No 77.00 above but 75mm

Material and labour for 75mm PVC (SWR) floor/ nahani trap, plain with grating incluidng jointing with solvent cement fixed in repairs complete all as specified and directed

Material and labour for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished rough to receive topping floor finish/layer complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate) as in foundation, filling & mass concrete, sub base to floors etc complete all as specified and directed.

Material and labour for 150mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in hardstanding, including brooming while concrete is green complete all as specified & directed.

Material and labour cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth in brick walls complete all as specified and directed.

Material and labour for cutting holes into or through brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, superficial area not exc 150 sqcm complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, (unframed work) complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets as in roof coverings complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Material and labour for MS work in angle iron/ flats/ pipes/ plates in posts, rafters, purlins, etc connected to common rafters of any size conforming to Fe-410-W (Grade-E-250) quality 'A' including necessary drilling holes, cutting tops to shape welding etc and fixed with nuts & bolts etc complete all as specified and directed

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified and as directed

Supply and fixing pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified and as directed

Supply and fixing mild steel screw bolts diameter of neck 11 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 5cm but n.exc 10cm long complete all as specified and directed.

Material and labour for mild steel, plain black sheet 1mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc as required complete all as specified and directed

Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. complete all as specified and directed

Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over 25mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE.

Material and labour for Providing precast cement concrete (1:2:4) type B-1 (20mm graded stone agggregate) in CM (1:6) as in kerb stones, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed

Dismantling RCC jalli etc., any thickness jointed in any mortar, complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed..

Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for providing 35mm thick (measured solid) precast cement concrete louvres and jallies in PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) including all mouldings but excluding frame set in cement mortar (1:4) complete all as specified and directed .

Material and labour for cement concrete (1:2:4) type B-0 (using 12.50mm graded aggregate) as in surface channels, drain and manhole etc. including necessary formwork (if required) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified.

Add to or deduct from Srl Item No. 31.00 here-in-before but for every 25mm girth or part thereof over or under 30cm,

Material and labour for mild steel angle iron fencing posts and struts in fencing including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wire etc. conforming to Fe-410-0 or 310-0 complete all as specified and directed

Material and labour for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. fixed complete all as specified and directed Note : Each line wire to be measured separately.

Supply and fixing chain link MS galvanised fencing, any size or type fixed to steel/ wdn/ concrete fencing post by nut & bolts etc including provision of binding wire/ round bar, complete all as specified and directed

Material and labour granite (of any type) work 16 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Supply and fixing 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap, fixed with bolts coach screws and washers with steel framed gate, walls etc. complete all as specified and directed.

Surface dressing not exceeding 15cm deep in soft/ loose soil including removing bushes/ small trees etc complete all as specified and directed

Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on wall, beams and column in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in beams, bressumers, cantilevers, lintels over 1.5m span complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in chajjas, parapet, facia etc. complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular in rough finished surfaces of concrete complete all as specified

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs etc also splays between floors and beams Complete all as specified.

Use and waste of formwork to chullah hoods, chajjas, troughs slab and similar items including edges complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour preparation of new surfaces of walls applying two coats of oil bound distemper including making good necessary doubing out where required with wall putty white cement base and making smooth finish and applying primer on wall complete all as specified & directed.

Material and labour for 75mm thick PCC (1:3:6) type C-0 using 12.50mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

Supply and fixing pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed

Supply and fixing 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Material and labour for 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing 200mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, D-type, 150mm size, all as specified and directed.

Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing floor door stopper (double) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified.

Material and labour in repair 20mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.

Material and labour for cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed with grey cement and pigment; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, water through and the like use of form work (straight or curved) including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Material and labour for rolled and tubular sections Fe-410-W (Gde-E-250) quality 'A' as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed (for Gazebo)

Material and labour for brick work with flyash brick sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed.

Supply and fixing 32mm dia PVC waste pipe for WHB/sink/urinal, complete all as specified.

Supply and fixing vitreous china urinal half stall type, white including connection to flushing pipe and outgoing pipe complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan white excluding fixing bolts, flushing cistern and flush pipe with and including 'P' or 'S' trap and making good to floor to match with existing complete all as specified and directed

Supply and fixing plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified.

Material and labour for toilet paper holder box type of vitreous china fixed to walls with chromium plated brass screws complete all as specified.

Supply and fixing soap dish 160mm x 160mm x 90mm stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified.

Supply and fixing bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15mm bore iron pipe complete all as specified and directed.

Supply and fixing CP grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed complete all as specified and directed.

Material and labour for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and fixing 75mm bore PVC (SWR) branches piece, double (double Y) equal or unequal with rubber rings joints fixed to walls complete all as specified and directed

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed.

Material and labour for Salt glazed stone ware drain pipes 150 mm bore laid in trenches and jointed complete all as specified

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone agg) as in bed to drain pipes including packing under and haunching against the pipes after they are laid and tested for 150 mm bore pipe complete all as specified

Material and labour for Cutting into existing manholes for connecting new drains by cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 and making good pipe, and reforming benching as required finishing even and smooth for 150 mm bore pipe complete all as specified.

Demolition of reinforced (reinforcement cut as required to facilitate demolition) cement concrete as in roofs, floors (other than ground floors), beam, staircases, landing, chajjas, parapet, balconies and similar suspended work complete all as specified and directed

Material and labour for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed.

Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface walls, roof, floors etc with any type of civil work involved complete all as specified and directed

Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type unsheathed multistranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including sheet steel concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled by one switch complete all as specified and as directed.

All as per srl item No 160.00 here-in-before but one fan point controlled by one switch.

All as per srl item No 160.00 here-in-before but one exhaust fan point controlled by one switch.

All as per srl item No 160.00 here-in-before but for one socket outlet 5 Amps on same board with other switches.

All as per srl item No 160.00 here-in-before but one socket outlet 5 Amp controlled by one switch on independent board.

All as per srl item No 160.00 here-in-before but with 2.5 Sqmm (nominal area) FRLS copper cable for one 3 pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

Supply and fixing in replacement switch modular type, 5 Amps, 240 volt AC single pole, one way including taking down existing switch complete all as specified.

Supply and fixing in replacement switch modular type, 15 Amps, 240 volt AC single pole, one way including taking down existing switch complete all as specified.

Material and labour for sheet metal enclosure DBs when MCBs to be used, SPN 4 ways 240 V, with copper bus bar, double door, epoxy/ powder coated inside and outside with earth bar and neutral bar, prewired complete all as specified.

Material and labour for sheet metal enclosure DBs when MCBs to be used, SPN 8 ways 240 V, with copper bus bar, double door, epoxy/ powder coated inside and outside with earth bar and neutral bar, prewired complete all as specified.

Supply and fixing MCB SP 6 to 32 Amps, B-curve, 10 KA complete all as specified and directed.

Supply and fixing MCB SPN 32 Amps, B-curve, 10 KA complete all as specified and directed.

Supply and fixing MCB SPN 40 Amps, B-curve, 10 KA complete all as specified and directed.

Material and labour in replacement earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4 mm dia by means of nut, bolts, check nut & washer of galvanized iron and GI lead protected with protection pipe of GI light grade 15mm dia with thickness of not less than 15cm in alternate layers of charcoal and salt on all sides of earth plate with funnel with wire mesh and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and directed and testing on completion including PCC (1:3:6) type C-1 cover and frame, excavation and earth work and testing etc complete all as specified. Note : On testing, after completion of job, if desired earth resistance is not obtained the earthing shall be redone by the contractor without any extra coat to the department

Supply and fixing in repair 70 Watt energy saving, environment friendly IP66 LED flood light luminaire with high efficacy 110 lumens/ watt complete with necessary connections all as specified and directed.

Taking down old unserviceable LT cable from excavated trenches, ducts, wall, pole etc including removing cable covers, sand, cable joints, pipes, clamps etc, taking out old serviceable cables, cable coveres, etc complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC sheathed, steel strip or wire armoured electric cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 16 Sqmm, 4 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC sheathed, steel strip or wire armoured electric cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 6 Sqmm, 2 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erecting poles, stay assembly etc. and getting out complete all as specified.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length complete all as specified and directed

Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches and punned down complete all as specified and directed. Note : Punned down thickness of 18cm will be measured.

Supply and fixing 50mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.

Material and labour for informatory/ cautionery flex board of size 1.5 x 2.5m having wording in three language upto 100 works in each of suitable height complete all as directed and fixed on MS frame of hollow square cross section steel of size 25 x 25 x 3 complete all as approved by Engineer-in-Charge.

Supply and fixing in repair of steel board upto 100 words supporting with 50mm GI pipe light grade alongwith give support of PCC 1:2:4 to GI pipe complete all as specified and directed

Supply and fixing in repair soft wood board of size 4' x 3' suitable for fixing on wall complete all as specified and directed

Material and labour for shifting of DG sets from existing plinth with the help of crane or necessary equipment after diconnecting all electric connection, earthing connection to directed place all as specified and directed

Material and labour for shifting of DG sets to the original location with the help of crane or necessary equipment and making all electric connection, earthing connection to directed place all as specified and directed

Supply and fixing socket out let 5 Amp, 5 pin modular type including taking down existing socket complete all as specified.

Supply and fixing in repairs socket outlet multipurpose 3 in 1, 6 pin, 5 & 15 Amps, modular type including taking down existing socket complete all as specified

Supply only modular cover plate (WHITE) with frame 6 module complete all as specified and directed.

Supply only modular cover plate (WHITE) with frame 3 module complete all as specified and directed.

Supply and fixing modular metal flush box of 6 module complete all as specified and directed.

Supply and fixing modular metal flush box of 3 module complete all as specified and directed.

Supply and fixing in repair aesthetically designed linear mirror light 4 watt with provided with high output PMMA diffuser for glare free light, dimension 600mm including taking down old one with all accessories and making good the existing disturb surface complete all as specified and directed.

Supply and fixing energy saving LED tube light fitting T8 (4 ft), 1 x 18W, 6500K, 2100 lumen, 230V ultra bright glare free, white light, wide angle, double side connection retrofit with G 13 lamp holders with inbuilt driver including pre-coated CRCA covered batten, box type, prewired including removing old fitting complete all as specified and directed.

Supply and fixing exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 300mm sweep of copper winding complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronics regulator and accessories, 230V, 120mm sweep min air delivery 210 CFM with service value 6.0 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing LED street light fitting 45 watt, 230V AC outdoor type with high presure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection all as specified and directed.

Supply and fixing medium grade GI bend pipe of length 0.6m and dia 25mm with necessary clamps and screws to completely fixed on wall or as per directed.

Earthing complete in replacement with galvanised steel earth plate electrode 60cm x 60cm x 6.0m thick buried directly in ground (each pit not less than 2.25 metres deep below normal ground level) with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron and including GI protection pipe of light grade 40mm dia upto 7.5 mtrs upto test point and aluminium strip 25 x 3.15mm from test point to equipment and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No. 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in (1:2:4) complete with any type of earth work involved all as specified and directed and testing on completion. Notes: (i) If result is not achieved satisfactory, contractor will have to do re-earthing at his own cost. Nothing shall be paid extra on this account. (ii) PCC chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner

S S CONSTRUCTION

NIRMAL SINGH

KAMALJIT SINGH CONTRACTOR