REPAIRS TO CUPBOARDS SANITARY FITTINGS WATER PIPE LINES AND FITTINGS WIRE MESH BUILDERS HARDWARE GLASS PANES SUNSHADE ROOF BALCONIES PVC WATER TANKS AND CONNECTED WORKS AT ZONE C UNDER GE CHENNAI

Amount

S&F in repairs 15mm dia bore Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete all as specified and directed.

All as per item No 1.00 here in before but of 20mm bore

S&F in repairs 16mm outer dia CPVC Pipes, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified and directed.

All as per item No 3.00 here in before but of 20mm bore

S&F in repairs 15mm dia bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm long of superior quality complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) and complete all as specified and directed.

S&F in repairs Vitreous china Wash Hand Basin, white, flat back of size 550x400mm excluding taps, waste, chain and plug and porcelain stopper out but including brackets, cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, low level flushing cistern 10 ltrs capacity with inlet, ball valve, float and handle including brackets i.e, with complete accessories, PVC flush pipe, PVC over flow pipe, etc., and connected to water closet as per manufacturer's instruction and as directed by the Engr- in-charge.

S&F In repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F In repairs 15mm bore long body bib tap fancy type, standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) complete all as specified and directed.

S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm92gms) complete all as specified and directed.

S&F in repairs Brass chromium plated 32mm bore bottle trap for wash hand basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap and fixed complete all as specified and directed.

S&F in repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs washers and wastes, including beading in cement mortar to dwarf of including fixing canti lever brackets and connecting union to pipe overll size 915mmx460mm bowl size 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as specified and directed.

S&Fin repairs plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets complete all as specified and directed. Cat No.513, Make Prayag

S&F in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated all as specified and as directed by the Engineer-in-Charge. Cat No BEA-87 Make : Prayag

S&F in repairs toilet paper holder with flap recessed type matt chromium plated all as specified and directed. Cat No.BA-48 of Make : Prayag

S&F in repairs in PVC waste pipe for wash hand basin (size 31/32mm x 800mm length) all as speified and directed. Cat No.327 of Make : Prayag

S&F in repairs PVC waste pipe for Sink (size 38/40mm x 1150mm length) all as speified and directed. Cat No.330 of Make : Prayag

S&F in repairs of Brass chromium plated 15mm wall mixer valve 3-in-1 for mixing hot and cold water incl provicion for hand and over head shower, fancy type complete all as specified and directed. Cat No. 8380 of Prayag

S&F in repairs of Brass chromium plated 15mm wall mixer valve 2-in-1 for mixing hot and cold water incl provicion only for over head shower, fancy type complete all as specified and directed. Cat No. 8375 of Prayag

S&F In repairs 15mm dia angle cock with flange, chromium plated complete all as specified and directed. Cat No. 8310 of Make : Prayag

S&F in repairs 15mm dia two way bib cock with flange, chromium plated complete all as specified and directed. Cat No.8311 of Make : Prayag

S&F in repairs tumbler holder with glass complete all as specified and directed. Cat No.BA-26G of Make : Prayag

S&F in repairs 32mm brass full thread SS waste coupling for wash hand basin complete all as specified and directed. Cat No.BEA-11 of Make : Prayag

S&F in repairs CP overhead shower ABS round with 225mm brass arm & flange complete all as specified and directed. Cat No.BS-69 of Make : Prayag

S&F in repairs conceled stop cock regular body 15mm with flange plate, chromium plated complete all as specified and directed. Cat No.8318 of Make : Prayag

Supply and fix in repair soap dish ,matt finished chromium lated (MCH/Colour) all as specified and directed. Cat No.BA-25G of Make : Prayag

S&F in repair corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP ) with bracket and fittings all as specified and directed by Engg-in- Charge. Cat No. BA-52 of make : Prayag

Supply and fix in repair glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings all as specifid and directed. Cat No.BEA-53 of make : Prayag

Supply and fix in repair CP robe hook all as specifid and directed. Cat No.BA-07 of Make : Prayag

Supply and fix in repair CP towel ring complete all as specified and as directed by Engineer-in-Charge. Cat No.BA-11 of Make : Prayag.

S&F In repair CP towel rack 600mm long with lower hanger stainless steel, complete all as specified and as directed by Engr-in-Charge. Cat No.BA-12 of Make : Prayag

S&F in repair CP towel rail 20"(500mm long) all as specified. Cat No.BA-20 of Make : Prayag

Supply and fix in repairs Stailness steel plate rack of size 910mm x 780mm x 250mm (31'' x 36 " 10") with separators and 3 tier shelves, provisionsing of hook 9 Nos made out of stailness steel sheet of grade AI SI 304 all as specified and directed. CAT No.P-348 of Make : Prayag

S&F in repairs CP cockroach trap (127mmx127mm) with waste hole complete all as specified and directed. Cat No.FT-25 of Make : Prayag

S&F in repairs SS round floor trap 4" (101mm) all as specified. Cat No.FT-74 of make : Prayag

S&F in repairs CP sink cock regular spout with flange(wall mounted) all as specified. Cat No.8316 of Make : Prayag

S&F in reapirs PVC cabinet mirror of size 400 x 500mm with sided shelves fancy type of superior quality complete all as specified and as directed by the Engr-in-Charge. Cat No.554 of Make : Prayag

S&F in repairs 15mm dia CP bib cock nozzle with flange(washing machine tap) complete all as specified and directed. Cat No.8305 of Make : Prayag

S&F in repairs CP centre hole basin mixer w/o pop up complete all as specified and as directed. as per cat No.8350 of Make : Prayag

S&F in repairs CP Pillar cock extended body all as specifid and directed. Cat No.8304 of Make : Prayag

S&F in repairs Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 25 mm bore pipes fixed complete all as specified and directed.

All as per item No 45.00 here in before but of 20mm bore.

S&F in repairs 1000 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical, vertical and closed top) hoisted and fixed in position and along with 20mm PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

All as per item No 47.00 here in before but of 500 litres capacity.

S&F in repairs PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F in repairs PVC (SWR) bends with oval access door 110mm complete all as specified and directed.

S&F in repairs PVC (SWR) bends with oval access door 75mm complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl 110mm complete all as specified and directed.

S&F in repairs PVC (SWR) juncton single (single T) equal or un equal with access door 75mm complete all as specified and directed.

S&F in repairs PVC (SWR) juncton single (single T) equal or un equal with access door 110mm complete all as specified and directed.

Complete removal of existing roof treatment of any description viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface. (b) Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (c) Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm. (d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed.

M&L for 75mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.)

M&L PCC 1:4:8, Type D2 (using 20 mm graded stone aggregate), 75 mm thick, as in sub base complete all as specified and directed.

M&L for sand filling under paver blocks including watering and consolidation all as specified and as directed

M&L for machine pressed precast concrete interlocking paver block any shape and size of 60mm thickness,M-35 Grade with grey cement and pigment all as specified and as directed

S&F for chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors Pattern, size and shade pointed with grey cement and pigment all as specified and as directed

M&L for Screed bed or bedding layer of mortar 15mm thk for laying floor finish in CM 1:6 all as specified and as directed

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for 15mm thick Rendering in CM 1:4 on fair faces of brick work or concrete surfaces all as specified.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint incl primer complete all as specified and as directed

Demolition of Stone slabs and tiles of laid bedded and pointed in cement morter or in any description or thickness in floors, platforms, aprons etc. all as specified.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1 : 4) including pointing ,mouldging the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

S&F Machine cut kota stone slab flooring 18-22mm thick over cement screed base 15 MM thick in CM 1: 6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (Note:- Tread of the stair case shall be provided with single stone.)

S&F Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over backing coat of CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. (Note:- Riser of the stair case shall be provided with single stone.)

Dismantling floor, hearth or wall tiling including cement mortar of existing backing coat and screed removing serviceable tile to store and rubbish off the premises all as specified.

M&L for Virified Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M&L for Virified Ceramic Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed by the Engineer-in-Charge.

M&L for non skid ceramic coloured joint free tile 7 to 8 mm thick Concept tiles design as approved (Sqaure or rectangular) area of each tiles eexceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M&L for glazed coloured ceramic Concept designer tiles of 7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE, fixed in vertical surfaces such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement plaster as a backing coat in CM 1:3 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or ceiling or from other concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. (Note : WPC shall measured and paid separately.)

Supply only Liquid water proofing compound. (Make SIKA/FOSROC/CHOKSEY)

M&L for preparation of new plastered surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed.

Material and labour for applying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of shalimar / Nerolac/ Berger.

Dismantling of asbestos cement (corrugated or semicorrugated, etc.)/PGI/CGI/Galvalume sheets as in roof coverings all as specified.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of structural steel work un framed as in roof members all as specified and directed by Engr-in-charge

S&F Steel work FE-410 in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc. 1sqm but not exceeding 2sqm each including builders hardware as directed by the Engineer-in-Charge.

Taking down shutters of any description n.exc. 1sqm each including builders hardware as directed by the Engineer-in-Charge.

Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening after cutting, easining etc with new iron mongry complete all as specified and as directed

M&L for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted all as specified and as directed.

M&L for 35mm thick second class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

M&L for 30mm thick second class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

M&L 30 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commericial type on both side etc. all as specified and as directed.

S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated all as specified and as directed.

S&F in repairs Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames as specified and as directed by the Engineer-in-Charge.

S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work including hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

S&F Sheet glass 4.0mm thick,figured glass pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

M&L for applying two coat of Synthetic enamel paint over a coat of pink primer for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed.

S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed.

S&F Butt hinges, 75mm size medium weight cold rolled mild steel Etc., all as specified.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc., all as specified.

S&F stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long all as specified.

S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified.

S&F Aluminium handles cast type anodised 100 mm size all as specified.

S&F Aluminium handles cast type anodised 150 mm size all as specified.

S& F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed.

S&F in repairs Butt hinges, 75mm size medium weight cold rolled mild steel Etc.,

S&F in repairs Butt hinges, 100mm size medium weight cold rolled mild steel Etc.,

S&F in repairs stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 100mm long all as specified.

S&F in repairs Aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified.

S&F in repairs Aluminium handles cast type anodised 100 mm size.

S&F in repairs Aluminium handles cast type anodised 150 mm size.

S&F in repairs Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed.

S&F in repairs mild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate complete all as specified.

S&F 140mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all as specified.

S&F in repairs 140mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all as specified.

S&F in repairs aluminium powder coated sliding window using alumimium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wiremesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge.

S&F in repairs aluminium powder coated ventilators using alumimium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed alongwith with 5mm thick frostes/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge.

S&F in repairs aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/ windows/ ventilator/ partition, glassing clipswith one or more tracks including joining cleats fot fixing complete all as directed by Engr-in-Charge.

Cutting holes in brick/stone walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismanted portion in cement mortar (1:3) or cement or cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate for the required depth of embedded portion of holdfast or lugs measured from the face of jamb in to the wall exc half brick but not exc one brick complete complete all as specified and as directed.

S&F in repairs 18mm thick plywood, grade BWR, type BB with decoraive laminate type1 0.90mm thick of surface finish colour and pattern as approved and fixed with approved adhesieve as per manufacturers instructions

S&F in repairs 18/19 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in repair all as specified

S&F in repairs 12mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in repair all as specified

M&L for 6mm thick external teak wood lipping over 18/19mm thcik particle board and plywood fixed with nails

S&F continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed.

S&F in repair Locks, drawer, cupboard shutters grade I, size 75 mm Brass 4 levers complete all as specified and directed.

S&F in repairs stainless steel Cabinet Hinges/self closing honges (Bombay Hinges) complete all as specified and as directed

S&F in repairs Magnet closures to cabinet cupboards complete all as specified and as directed

M&L for repair aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clambs and fixed to wall PVC rawel plug and brass screws all as specified and as diredcted including dismantling one of any description.

M&L for Aluminium designer curtain rod brackets in repairs complete all as specified and as directed.

S&F in repairs Cast Aluminium (Die cast) body door closer bydraulically regulated, designation No.2 univrsal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repairs mortice lock vertical type mild steel size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

M/SJAYAM CONSTRUCTIONS

Sri Aruna Associates

ARK Enterprises

GK ENTERPRISES

KS CONSTRUCTIONS