Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.6 L
EMD Value
₹5,200
Closing Date
7 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN - 151201
PROVISION OF MARKINGS ON HANGER FLOOR AT BHISIANA UNDER GE (AF) BHISIANA
2026_MES_794349_1
GE/BHI/TOKEN-75/2026-27
Open Tender
Civil Works
Item Rate
92 days
GE (AF) BHISIANA
As per NIT
7 documents required · 7 mandatory
₹300
GE (AF) BHISIANA
₹5,200
Yes
GE (AF) BHISIANA
16 Oct 2026
16 Oct 2026
9 Nov 2026
16 Oct 2026
7 Nov 2026
31 Oct 2026
16 Oct 2026 - 30 Oct 2026
23 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and labour for preparing and applying epoxy floor markings on the existing EPU surface, including removal of dust, dirt, oil, grease and other contaminants, setting out and marking the required geometry for continuous and broken lines, curves, centre lines, stop lines, equipment-location markings, wheel-guidance markings, other linear floor markings and aircraft parking marking, with a line width not exceeding 25 cm, applying masking tape along the boundaries to achieve sharp and uniform edges, applying a compatible epoxy primer/base coat, and applying two coats of two-component epoxy floor-marking paint of approved colour, uniformly by roller, brush or suitable marking machine, in accordance with the manufacturer's instructions. The work shall be executed by skilled and experienced applicators/painters, including protection of adjacent surfaces, curing and removal of masking tape, complete all as specified and as directed by the Engineer-in-Charge.
Note :- Measurement for payment shall be based on the actual marked area, calculated by multiplying the actual length and actual width of each line, curve etc. For broken lines, only the actual painted lengths shall be measured, excluding the gaps. The total area shall be the sum of the areas of all markings, measured in square metres | 142 | Sqm | - | - |
| 2 | Material and labour for preparing and applying epoxy floor markings on the existing EPU surface, including removal of dust, dirt, oil, grease and other contaminants; setting out and marking the required geometry for lettering; applying masking tape along the boundaries to achieve sharp and uniform edges of letters; applying a compatible epoxy primer/base coat, and applying two coats of two-component epoxy floor-marking paint of approved colour, uniformly by roller, brush or suitable marking machine, in accordance with the manufacturer's instructions. The work shall be executed by skilled and experienced applicators/painters, including protection of adjacent surfaces, curing and removal of masking tape, complete all as specified and as directed by the Engineer-in-Charge.
Note: Measurement shall be made in square metres based on the overall outer-to-outer width and height of the marked lettering, measured as a rectangular/Square box enclosing the complete marking. | 25 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
BOQ_890896.xls
BOQ • 0.25 MB
TenderDocToken75.pdf
Tender Documents • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .