SPECIAL REPAIR TO SEWAGE LINE AT OLD SANCHI OFFRS MD ACCN AT BAIRAGARH, BHOPAL

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in in any type of soil complete all as specified and directed.

Ditto all as per Item No.1.00 here in before but exc 1.5m in depth & n exc 3.0m in depth.

Demolition and breaking up drain pipes (SGSW, AC, RCC or PVC), set in cement mortar and disposal of unserviceable materials and rubbish to a distance not exceeding 100m for the following dia/ bore:

Demolition of cement concrete (un-reinforced) of any description and in any position (below or above ground level) complete all as specified and directed.

M&L for Cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete (1:4:8) type D2 (using 40mm graded crused stone aggregate) for the following dia/ bore:

M&L for salt glazed stoneware drain pipes, class "A", laid in trenches and jointed in CM (1:1) including testing for the following dia/bore :-

M&L for reinforced concrete pipes, class NP 2 of dia 200mm, laid and jointed complete with collars complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to walls including clamps of the following bore :-

S&F in repair PVC (SWR) pipe bend of the following bore :-

S&F in repair PVC (SWR) junction single (single 'T') equal or unequal of the following bore :-

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap with grating including jointing to waste pipe fixed with solvent cement

S&F PVC (SWR) branch piece, single, (single 'Y'), equal or unequal with access door and fixed-75mm bore/dia complete all as specified and as directed.

S&F PVC (SWR) branch piece, single, (single ' Y'), equal or unequal, with access door and fixed-110mm bore/dia complete all as specified and as directed.

S&F PVC (SWR) branch piece, double, (double 'Y'), equal or unequal, with access door and fixed-75mm bore/dia complete all as specified and as directed.

S&F PVC (SWR) branch piece, double,(double 'Y') with access door and fixed-110mm bore/dia complete all as specified and as directed.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cm (1:6) all as specified and directed.

M&L for PCC (1:2:4) type B-1 (Using 20 mm graded crushed stone aggregate) as in coping, channel, benching of manhole laid to shape and slope and finished even and smooth using extra cement including weathering, throating and necessary form work complete all as specified and directed.

Demolition of cement concrete (reinforced) including Precast manhole cover (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for Providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar (1:4) complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately.

M&L for Mild steel TMT Bar 6 to 8mmm dia cut to length, bent to shape to required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild seel wire (anneled) not less than 0.9mm dia or securing with clips quality confirming complete all as specified and directed.

Excavating over areas, not exceeding 1.5 m in depth ; for foundation etc. and getting out in hard/dense soil, complete all as specified and directed.

Excavating over areas, exceeding 1.5 m but n exc 3.00 m in depth, for foundation and getting out in soft/ disintegrated rock complete all as specified and directed.

Excavating over areas, exceeding 3.00 m but n exc 4.50 m in depth, for foundation and getting out in soft/ disintegrated rock complete all as specified and directed.

Returning filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as sspecified and directed.

Removing excavated surplus soil etc not exc 50 m and depositing where directed at level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for Brickwork with sub-class `B' bricks, straight or curved on plan to any radius as in half brick thick walls, built in cm (1:4) complete all as specified and as directed.

M&L for providing RCC (1:1.5:3) type A-1 (using 20mm graded crushed stone aggregates) in screen walls, fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade and the like complete all as specified and as directed.

M&L for providing RCC (1:1.5:3) type A-1 (using 20mm graded crushed stone aggrergates) in slabs supported on walls, floor slabs, roof slabs and the like complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4), with using WPC and finishing top surfaces even and smooth without using extra cement complete allas specified and directed. Note: WPC shall be measured & paid seperately.

Supply only approved integral waterproofing compound

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with fair finished flat concrete survaces complete all as specified.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with fair finished flat concrete survaces complete all as specified.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with fair finished flat concrete survaces complete all as specified.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required inluding cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clipscomplete all as specified and directed.

Ditto all as per Item No. 36.00 here-in-before above but 6 to 8mm dia and over including rungs for manholes and steps etc.

Ditto all as per Item No. 36.00 here-in-before above but as in ms rungs, frames, holdfasts etc for manholes/septic tank and steps etc.

M&L for preparing new Steel Surfaces of any description, over 10cm in width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over one coat of redoxide complete all as specified and directed

S&F 75mm bore/dia PVC cowl all as specified

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

M/S RAKESH TRADERS

Vee kay construction

M/S Shanti Traders

RAJPATI CONSTRUCTION

S Balwinder Singh

SHIV SHANKAR MISHRA