ADDN / ALTN TO CERTAIN OFFICE BUILDINGS AND PROVN OF CERTAIN B/R AND E/M FACILITIES IN CERTAIN BUILDINGS UNDER GE (AF) TECH AREA AT AF STATION AGRA

Amount

M&L for PVC flooring of Armstrong Simpurity plus 2mm thick including required fixiing materials complete as per manufacturer specification and as directed by engr in charge.

S&F 18mm thick PVC foam board (WPC) of density 600kg/cum both side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge incl reqd hinges and handles complete all as specified and as directed.

S & F Continuous (piano) hinges (Width of Flaps 40mm), mild steel, bright finish or electrogalvanised all as specified and as directed.

S&F 75mm Brass handles, cast type, polished bright all as specified and as directed.

S&F stainless steel finished butt hinges cold rolled medium weight of size 75 mm complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring for leveling course complete all as specified and directed

M&L for 18 to 20mm thick Granite work (table rubbed and polished ) of Lakha Red or Telephone Black colour for shelves,counter slabs,floors etc including 15mm thick backing of CM (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of (terrezo/ PCC/granite of any description) and removing the rubbish from the site complete all as specified and as directed.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed ( Minimum wt 15 mm - 142 gms/20 mm - 210 gms) complete all as specified and as directed.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed .

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.

Supply & fixing pillar taps swan neck cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed .

S&F in repair PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed

S&F in repair PVC (SWR) plain bend 160 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

S&F cast iron floor trap 100mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed .

S & F 100 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed .

S & F 100 mm dia bore PVC (SWR) bends any radius complete all as specified and directed .

S & F 100 mm dia bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed .

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and as directed

M&L for rendering 10 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without using extra cement on internal wall surface complete all as specified and directed .

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper white or tinted over a coat of wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and primer complete all as specified and directed.

M&L brick work with fly ash bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 including plaster in CM 1:6 and two coat of cement base paint over a coat of primer complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed .

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with fly ash bricks, straight of curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed.

Dismantling wall and ceiling boards ( fibre, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover filletts complete all as specified and directed.

M&L for Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) Fully perforated 12mm thick micro tegular edges or 10mm thick square edged false ceiling tiles of Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over with and including 10 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with incl 15mm thick screed bed in CM 1:6 laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving exc 15 cm thickness (below or above ground) complete all as specified and directed.

M&L for 100mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 ( 20mm graded stone aggregates) , 50 mm thick as in floor, coping etc complete all as specified and directed.

M&L for 25 mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness,with minimum compressive strength of 35N/sqmm (M-35 grade) without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed.

M&L 20-25mm thick plastic coated coloured chequered tiles, area of each tile exc 0.05sqm but n.exc 0.09sqm with and incl 20mm thick screed bed in CM (1:6) of approved colour and pointing with grey cement and pigment complete all as specified and directed.

M&L for PVC wall profile for wall panelling colour/shade as approved size250mm wide, 08mm over all thick with 1mm wall thickness fixed with screw fixed to walls with necessary frame , complete all as specified and as directed . Note:- Taking down of existing switch board/tube light etc and refixing the same shall deemed to be included in the quoted rates.

M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching wall panelling complete all as specified and as directed .

M&L for solid PVC wall lining consisting of 5.00mm thick single side prelaminated PVC sheet inclusive of insolvent cement and fixing at site on PVC frame complete all as specified and as directed . Note:- Taking down of existing switch board/tube light etc and refixing the same shall deemed to be included in the quoted rates.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed

M&L 20mm thick Granite telephonic black (of any type) tiles machine cut, in skirting/ dado laid over cement screed 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc if any required at site for entire completion of work all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with liquid water proofing compound @ 200 Ml per bag of cement or as per manufacturer's instruction, finished the surface fair and even complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc if any required at site for entire completion of work all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item .

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camoflage pattern, as per manufactures instructions etc complete all as specified and as directed. Note :- Primer to be carried out through air less spray machine (Mechanical means) incl cleaning of existing windows/doors/floor etc.

M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling applying three coat of white wash by using mechanical device complete all as specified and as directed.

M&L for preparation of new surfaces of walls and applying two coat of oil bound distemper white or tinted complete all as spewcified and directed.

Cleaning and saturing the top substract and then applying the primer coat with DR.FIXIT PRIMESEAL @ 0.10 Ltrs/Sqm and than applying the THREE LAYERS SYSTEM of heavy duty reinforced acrylic coating of DR.FIXIT NEW COAT @ 1.50 Ltrs per sqm incl ATT on wall for achiving 1mm thick layers by authorized applicator complete all as specified and directed.

M&L for preparation of old surfaces and applying Two coats of exterior emulsion paint with one coat of primer in normal / camouflage pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:- finishing coat shall be through roller only. Note :- Primer and emulsion to be carried out through air less spray machine (Mechanical means)

M&L for preparation of old surfaces of walls and applying two coat of oil bound distemper incl 1mm thick of Birla/JK wall care putty over prepared surface white or tinted all as directed.

M&L in repair for factory made stone kerb of roughly squared stones of size 15cmx30cmx30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in CM 1:6 and struck flush incl two coat of external emulsion paint over one coat of primer complete all as specified and directed

Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

Excavation in trenches(loose soil) not exc 1.5 m wide and not exc 1.5m depth and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material n exc 100m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed .

Returning, filling soft/loose soil in including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed .

M&L for providing cement concrete type C-2, 1:3:6 ( using 20mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410 -W(Gde-E- 250) quality-A all as specified and directed.

S&F coloured pre-painted galvalume aluminium zinc coating(150GSM) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed..

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for prepararing old decorated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic Enamel paint over aluminium red oxide primer ,in any position including necessary scaffolding and cardles complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, aluminium die cast body, ISI marked, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified & directed.

M&L 12mm thick veneered partcle board exterior grade faced with decorative veneer on both faces including fixing with rubber gasket and all around aluminium frame for aluminium partition complete all as specified and directed.

S&F Aluminium Powder Coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators/Partition with extruded built up standard tubular sections/appropriate Z sections and other sections of appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top,bottom and sides with required EPDM, rubber/neoprene gasket etc.Aluminium sections shall be smooth ,rust free,straight,mitred and jointed mechanically wherever required including cleat angle ,al snap beading for glazing/panelling,C.P. brass/stainless steel screws etc, complete all as specified.

S&F in repair venetian blinds in double layers roller type of approved colour including all accessories, fitting/fixtures required for fixing the same in windows complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4 sqmm drawn in and including PVC rigid conduit not less than 20mm dia with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 4 sqmm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 4sqmm cable & one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 10sqmm drawn in and including PVC rigid conduit not less than 25mm dia with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 10 sqmm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 4sqmm cable & one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

S&F factory made sheet metal enclosure 415 volts, 4 ways with 250A rated bus bar, VTPN DB, double door type IP43 suitable for I/c as MCCB and outgoing as MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

Supply and fixed MCCB four pole with enclosure, 415 volts, 160 Amps with breaking capacity 36KA complete all as specified & directed.

Supply & fix MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" series and making connections complete all as specified & directed.

Supply & fix sheet metal enclosure single pole and neutral with a two pin & earth plug and socket complete with single pole MCB 20 Amp complete all as specified & directed.

deva engineers (BID ID -3405847)

Shiv Krishan Associates (BID ID -3405661)

M/s M S Sharma and Co. (BID ID -3405232)

aman construction & general suppliers (BID ID -3413356)