CONSTRUCTION OF ANICUT ACROSS LOCAL NALA NEAR HUNSIHADGIL VILLAGE IN KALABURAGI TALUKA & DISTRICT UNDER 4702 APB FOR 2025-26

CONSTRUCTION OF ANICUT ACROSS LOCAL NALA NEAR HUNSIHADGIL VILLAGE IN KALABURAGI TALUKA & DISTRICT UNDER 4702 APB FOR 2025-26

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials with all lead and lifts etc., complete with all lead and lift ...

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...

Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour, tamping, plugging leakage points and all other ancillary operations complete etc...

Earth work in surface excavation by mechanical means for lowering & leveling the ground in all kinds of soils upto 300 mm depth for all works other than foundation in all kinds of soils & upto depth n...

Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...

Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging/ chiselling and disposing off the same as directed and cleaning the surface with air and wate...

Providing and fixing 25 mm dia 2.75 m long ribbed steel anchor rods with one end split and driven fimly using steel wedge into 1.25 m deep 38 mm dia. hole drilled in bed rock and other end provided wi...

Providing and laying in position cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all foundation works. The granite/ trap/ basalt crushed graded coarse aggr...

Providing centering, shuttering, formwork, scaffolding, etc., complete with all lead and lift as per direction of Engineer in charge.

Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relev...

Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handle...

Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...

Providing rubble/ boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations complete etc., compl...

Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...

Providing casing embankment using semi-pervious/ pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other o...

Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...