Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹13.4 L+₹1.0 L (8.15%)Rejected-Finance VPO BAILLY TEH DALHOUSIE DISTT CHAMBA HP 176303 | DALHOUSIE | CHAMBA | HIMACHAL PRADESH | 176303 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹14.0 L+₹1.6 L (12.9%)Rejected-Finance NEAR CIVIL HOSPITAL VILLAGE PO CHOWARI DISTT CHAMBA HP | CHOWARI | CHAMBA | HIMACHAL PRADESH | 176302 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹14.1 L+₹1.7 L (14.1%)Rejected-Finance R O BALOON BAZAR DALHOUSIE CANTT TEHSIL DALHOUSIE DISTT CHAMBA HIMACHAL PRADESH PIN 176304 | CHAMBA | HIMACHAL PRADESH | 176304 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹15.6 L+₹3.2 L (25.9%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L5 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT-145001
WELCOME MAINT AND MISC REPAIRS TO CERTAIN BUILDINGS AT MOTITIBBA, BAKROTA AND DAINKUND AT AIR FORCE STATION DALHOUSIE
2023_MES_597802_1
8422/GE/PAF-13/2023-24
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) PATHANKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) PATHANKOT
₹40,000
Yes
15 Jul 2023
23 May 2023
22 Jun 2023
23 May 2023
20 Jun 2023
6 Jun 2023
Amount
Taking down cement plaster of any thickness racking out joints, hacking for key scrubbing down with water including removal of rubbish of the premises complete all as specified and all as directed by Engineer-in-Charge.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and all as directed by Engineer-in-Charge.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and all as directed by Engineer-in-Charge.
Rendering 5 mm thick on ceiling faces other than fair of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and all as directed by Engineer-in-Charge.
Preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces in camouflaged pattern complete all as specified and directed by Engineer-in-Charge.
Preparation new surfaces of walls and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and all as directed by Engineer-in-Charge.
Preparation of new surfaces of ceilings and applying three coats of white wash on newly plastered surfaces of ceiling complete all as specified and as directed by Engineer-in-Charge.
Preparation of old ceiling surfaces by brooming down or steel wire brushing scrapping down smoke soot,moulds, moss and efforescent salt and trading oil and greasy spot and applying two coats of Oil bound distemper over 3mm thick wall care putty of ceiling complete all as specified and directed by Engineer-in-Charge.
Preparation of old wall surfaces by brooming down or steel wire brushing scrapping down smoke soot,moulds, moss and efforescent salt and trading oil and greasy spot and applying two coats of Oil bound distemper over 3mm thick wall care putty of wall complete all as specified and directed by Engineer-in-Charge.
Preparation of old surfaces by brooming down or steel wire brushing scrapping down smoke soot,moulds, moss and efforescent salt and trading oil and greasy spot and applying one coat of Oil bound distemper of decorated surface of walls complete all as specified and as directed by Engineer-in-Charge.
Preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge
Preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge
Preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying One coat of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Dismantling old Wall and ceiling boards (fiber, pulp insulation/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge
Providing & fixing false ceiling at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in Charge.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each leaf with shutters (without taking off shutters from the frame) and removing from site all as specified and directed by Engineer-in-Charge.
Supply and fixing anodised aluminium power coating minimum thickness of powder coating 50 micron frame for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing anodised aluminium power coating minimum thickness of powder coating 50 micron frame for door shutters,aluminium section weighing 0.55 kg/m including joining cleats glazing clips rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed by Engineer-in-Charge.
Suppling and fixing of 5.5 mm thick tinted/plain glass for aluminium windows/doors having each pane exc 0.5 sqm inluding complete fittings all as specified and directed by Engineer-in-Charge.
Suppling and fixing of 5 MM thick plain colour pvc backelight sheet in strips channel feathered at for fixing on aluminium frame partition complete fittings all as specified and directed by Engineer-in-Charge.
Suppling and fixing of galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.
Suppling and fixing of Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & Fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
Suppling and fixing of Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed by Engineer-in-Charge.
Suppling and fixing of 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified by Engr-in-charge.
Suppling and fixing of 150 mm size aluminium handles, cast type,anodised complete all as specified by Engr-in-charge.
Suppling and fixing of 150 mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified by Engr-in-charge.
Suppling and fixing in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified by Engr-in-charge.
Supplied and fixing for Ist class hard wood plain or solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joints complete all as specified by Engr-in-charge.
Supplied and fixing for 35 mm thick plain framed panelled shutters (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated complete all as specified by Engr-in-charge.
Supplied and fixing for locally fabricated glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a)complete all as specified by Engr-in-charge.
Preparation of new surfaces and apply two coat of Synthetic enamel paint over a coat of pink primer on new wood surface of any description not otherwise described over 10cm in width or girth complete all as specified and all as directed by Engineer-in-Charge.
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and all as directed by Engineer-in-Charge.
Non skid tiles coloured of 1st or premium quality edge cut joint free tiles exc 0.06 sqm and n.exc 0.11 sqm ,7 to 8mm thick of any colour pattern in floor set and jointed in grey cement slurry and pointed in white cement to match the colour of tile including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and all as directed by Engineer-in-Charge.
All as per ser item No 34 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and all as directed by Engineer-in-Charge.
Glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and directed by Engineer-in-charge.
Granite black slab, 20mm thick, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc.complete all as specified and directed by Engineer-in-charge.
Dismantling boarding any description, fixed in any position with nails complete all as specified and all as directed by Engineer-in-Charge.
Dismantling timber scantling 40 sqcm and over in section in any position complete all as specified and as directed by Engineer-in-Charge.
Hard core of guage n.exc 63mm, deposited spread and levelled in layers n. Exc 15cm thick watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.
PCC 1:2:4 type B-1using 20mm graded crushed stone aggregate) 40mm thick, finished even and smooth without using extra cement as in floors complete all as specified by Engineer-in-Charge.
Supply and fixing of vitrified ceramic tiles light shade, 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified by Engineer-in-Charge.
All as per ser item No 42 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified by Engineer-in-Charge.
Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and directed by Engineer-in-Charge.
PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair single bowl sinks with drain board made of stainless steel 1mm thick kitchen with plugs, washers and waste, including bedding in cement mortar or incld fixing cantilever brackets and connecting union to pipe, overall size 915mmX460mm bowl size 410mmX 330mm X160mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 15mm Angle/stop/gate valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.
Supply and fixing inin repair Stainless Steel curtain rod of 20 mm dia with Stainless Steel bracket including CP globe at both ends for each door and window, rings and side caps for every one meter fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw including CP globe on both ends for each door and window opening complete all as specified and directed by Engineer- in - charge.
Havish Construction
m/S Varun Gupta
J.S. Constructions
Vijay Kumar Contractor and Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .