Provn of RCC frame structure toilet block in replacement existing dilapidated toilet/bathroom block in bldg No E-13 of 307 Fd Hosp under GE (East) Fzr Cantt

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in tenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

All as per Serl Item No 2 here in before but exc 1.5m and not esc 3 m depth complete all as specified and directed.

M&L PCC 1:4:8 type D2 ( using 40mm graded stone aggregate ) as in foundations, filling and mass concrete etc complete all as specified and directed.

M&L brick work with sub class 'B;' bricks straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits ( if any) of foundations and plinth beams and similar work, vertical orr batter etc rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of conctete flats, treads, breaks in floors, window cills, concrete rialings, openings in conctete walls, floor and roofs horizontal or slopping and similar work exceeding 10cm but not exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per srl item No. 12 here in before but 6mm to 8mm dia complete all as specified and directed.

All as per srl item No. 12 here in before but 5mm dia and over up to and including 10mm dia as in stirups complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design Mix) 20mm grade aggregate as in Foundation, footings, plinth beams, bases of columns etc complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design Mix) 20mm grade aggregate as in columns, pillars, piers, posts and structs etc complete all as specified and directed.

M & L Reinforced cement concrete (M 25 Design Mix) 20mm grade aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed

M&L reinforced cement concrete ( M-25 Design Mix) 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design Mix) 20mm grade aggregate as in chajjas complete all as specified and directed.

Returning, filling in including speading leveling, watering and wall ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed

Removal of surplus soil not exceeding 100 metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.

Speading and leveling in layers not exceeding 25 cm thick each layer including watering and well ramming complete all as specified and directed.

M & L rendering 15mm thick plaster in CM 1:6 on fair faces of brick work/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick plaster in CM 1:4 on other than fair faces of brick work/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick on ceillings in CM 1:3 etc complete all as specified and directed.

M & L applying 3 coats of white washing on walls including preparation of new plastered surface complete all as specified and directed.

M & L two coats of cement base paint over one coat of cement primer on walls including preparation of new plastered surface complete all as specified and directed.

M & L applying 3 coats of white washing on celing including preparation of surface complete all as specified and directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and directed.

S & F factory made 35mm thick second class HW plain framed panelling shutter (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail & stile as per SI-1003 (Pt-I) kin seasoned and chemically pressure treated for anti termite treatment complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with sovent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent complete all as specified and directed and shown on draing.

S & F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified, directed and shown on drawing.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F factory made mild steel box type window with side hung shutter including pintol hinges-2 Nos, tower bolts 150 mm long, steel handle ans stopper with sash bars complete all as specified and directed.

All as per Ser item No 36 above but without sash bars for gauged windows complete all as specified and directed.

M&L mild steel framed work of FE-290 grade E-165 such as grils/guard bars with end of bars shouldered and /or riveted with steel /ventilators complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars docetailed or welded and with one shope coat of zinc chromate primer complete all as specified

S&F 3mm thick sheet glass ordinary quality and glazing withouth putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

All as per srl item No 40 above but forsted glass complete all as specified and directed.

S & F Galvanized mild steel wire cloth 0.56 mm noninal dia of wire and average width of sqm aperture not more than 1.8 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S& F 250mm MS sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with axe including a minimum of 6 bolt and nuts 4 on bolt plate and 2 on staple plate complete all as specified and directed.

S&F mild steel butt hinges medium weight cold rolled size 100mm complete all as specified and directed.

S&F 200mm mild steel semi barrel tower bolt, open cover with sheet pressed barrel, stove enamelled black with bright not complete all as specified and directed.

S&F 150mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm in width or grith not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden or wood based surfaces of any description over 10cm in width or grith not otherwise described and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rests with & including necessary lime concrete and jointing with 100mm bore cast iron P or S trap for connecting WC to brach piece with cement joints, complete all as specified and directed.

S&F Wash down water closet (pedestal pattern) vitreous china white including sheet cover,jet, connection to drain or out going pipe and to flushing pipe anti-syphonage pipe incl. stainless steel jet pressure etc, fixed in repairs, complete all as specified and directed.

M&L PVC low level flushing cistern (white) of 10 litre capacity with inlet ball valve float and handle, valve less symphoinc action type, including brackets PVC flush pipe and necessary fixing arrangement and connecting to water pipe and WC etc complete all as specified and directed.

Supply & fixed wash basin white vitreous china flat back of size 550 x 400 mm including the following complete all as specified and directed. (a) Brass,chromium plated waste fittings,32mm bore size. (b) Waste pipe,PVC,32mm bore. (c) Angle iron/cast iron bracket of required size as directed. (d) Making good disturbed surfaces to match with the existing

S&F Pillar tap fancy type cast copper alloy chromium plated with capstan heas, screwed down high pressure, with lettered "Hot" or "cold" with long screwed shanks and fly nuts screwed for 15mm bore pipe,complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe)

M&L rolational moulded polythene water storage tank 100 liters capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S& F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

S & F as in repair PTMT shower Rose swivel type 125 mm size (minimum wt 40 gram) complete all as specified and directed.

S &F repair Bib tap, 15 mm of cast copper allowy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified & directed.

S&F GI tubing and connections medium grade 15mm galvanised with all fittings and fixed complete to walls and celling or laid in floor etc complete all as specified and directed.

S&F GI tubing and connections medium grade 20mm galvanised with all fittings and fixed complete to walls and celling or laid in floor etc complete all as specified and directed.

S&F 15mm stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Stop cock cast copper alloy,20mm bore,screwed down,high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified and directed.

S&F in repair towel rail, 19mm dia brass chromium plated 600mm long with fancy type brass Chromium plated brackets on both sides and fixed to walls with steel screws/rawl plugs complete all as specified and directed.

S&F Soap dish, PTMT white /colour appx size 150 x 100 x 75mm complete all as specified and directed.

S&F 100mm dia cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints laid in trenches or in floors completed all as specified and directed.

All as per srl item No 67 above but 75mm dia pipe complete all as specified and directed.

All as per srl item No 67 above but 50mm dia pipe complete all as specified and directed.

S&F 50mm bore cast iron cowl complete all as specified and directed.

M&L 100mm diameter of outlet CI floor trap, with stainless steel grating including, jointing to waste pipe fixed in cement concrete type BI (1:2:4) completed all as specified and directed.

All as per SI item No 71 above but 75 mm dia complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) as in sub base of floor completed all as specified and directed.

M&L Non skid ceramic coloured tiles (light colour as approved) of size 400x400x7mm thick as in flooring set and jointed in neat cement slurry over & including 20mm thick screed in cement mortar (1:6) over 25mm thick cement concrete 1:2:4 type B-O using 12.5mm graded crushed stone aggregate as in floors/sub floors and pointed in white cement with pigment to match the colour of tiles completed all as specified and directed.

M&L Glazed ceramic tiles, coloured (light colour as approval) of size 200x300x6.5mm thick on ventical surfaces such as in skiiting/dado etc set and jointed in cement slurry over & including 10mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles completed all as specified and directed.

M&L brick hardcore of gauge not exceeding 63mm deposited, spread and leveled in layers not exceeding 15cm thick watered and rammed to a true surfacecompleted all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-2 (with using 40mm graded stone aggregate) as in plinth protection,concrete surface finished even & smooth without using extra cement including construction joints completed all as specified and directed.

M&L Rendering 15mm thick screed/cement plaster in CM 1:3 with IWPC on RCC surface of roof/Brick walls finshed fair and even white the concrete is green complete all as specified and directed. IWPC shall be measured and paid sperately.

Supply only interal water proofing compound (ISI marked)

M&L applying evenly a tack coat of industrial bitument 85/25 at the rate of 1.2 Kg per Sqm including cleaning of surface completed all as specified and directed.

M&L Ploythene film 150 micron thick laid on a coat of bitumen primer @ 0.30 to 050 Kg per sqm in roofs with 150mm overlaps completed all as specified and directed.

M&L 80mm thick average consolidated thicnesss, mud pushka on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping completed all as specified and directed.

M&L for 40mm thick brick tiles laid on mud mortar and jointed grouted flush in CM (1:3) mixed with 5% of crude oil by weight of cement on mud phuska completed all as specified and directed.

M&L Flush pointing to brick tiles/ terracing tiles on roofs in cement mortar 1:3 completed all as specified and directed.

S&F 50mm dia HDPE pipe of pressure rating 6 kgf/cm2 laid in tenches or floors completed all as specified and directed.

M&L for pre cast cement concrete 1:2:4 type B-1 with using 20mm graded stone aggregate as in Manhole cover/Buffle wall and placing where directed including necessary form work completed all as specified and directed.

M&L Black Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, WHB platform, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra over 15 mm thick Screed in CM (1:4)

M&L Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe complete all as specified and directed.

M&L for Cement concerete bed to drain pipes incl packing under haunching against the sides of pipes after they are laid tested in 1:4: 8 type D-2 using 40 mm graded stone aggregate of bore of pipe 150 mm.complete all as specified and directed.

M&L 150mm bore salt glazed stone ware drain pipes grade ‘A’ laid in trenches and jointed complete all as specified and directed.

Cutting in to existing man holes for connecting new drains, making good to pipes and rendering, cutting out existing benching & forming branch channel in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm pipe.complete all as specified and directed.

S&F Factory made 60mm thick pre-cast coloured interlocking tiles PCC (M-35 Nominal Mix) over 25mm thick layer of fine sand and grouted with dry sand over and including 75mm thickg brick hard core complete all as specified and directed.

S&F as in repair continuous brick edging using full bricks of sub class ''B'' old size bricks with width equal to width of bricks laid dry on end vertically including necessary earth work, embedding bricks at reqired depth and tamping ground around brick and removal of surplus soil to a distance n exc 50 metre, complete all as specified and directed. (each row measured separately)

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches and sockets etc complete for one light/ Exhaust fan point controlled by one, one way switch all as specified and directed.

All as per item No 1 above but One 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size

All as per item No 1 above but One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size

S&F Glint Switch piano modular flush type of single module, 6 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified and directedMake- INDOASIAN Cat Part No-800000 or other makes as approved by GE

S&F Glint modular Socket, 6 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified and directedMake- INDOASIAN Cat Part No-800020 or other makes as approved by GE

S&F Ceiling rose, surface type, bakelite 65 x 50mm, 3 terminals made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed

S&F Lamp holder, pendant/ batten syrface type, made up of Polycarbonate FR material with cord grip cap suitable for pendant fittings, complete all as specified.

S&F LED bulb of 10 watt all as specified and directed. Make-Havells, Model No-LED ADORE 10 W B22 CDL 3 STAR LAMP or equivalent in Crompton/ Wipro as approved by GE

S&F LED fittings of 20W LED 6000 K, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient fixed to wall/ ceiling/ roof etc complete all as specified and directedMake- Havells, Model- E-Lite LED Pride Plus Neo, Cat Part No-LHEXACP7IN1W020 or equivalent in Crompton/ Philips as approved by GE.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directedMake - Crompton, Model- EXHD300-6-1 or equivalent in Khaitan/ CG/ Bajaj as approved by GE

S&F stationary water heater (Geyser) vertical storage type, electric driven, closed vented type of capacity 25 Ltrs, including provision of bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall complete all as specified and directedMake - Bajaj, Model No- Shakti Plus or equivalent in CG, Havells, Recold as approved by GE complete all as specified and directed

S&F Sheet metal enclosures with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 240V, 20 amps

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directedMake- HPL Cat Part No-MDBDD08 or equivalent in INDOASIAN/ Legrand as approved by GE complete all as specified and directed.

S&F MCB SPN, 40 Amps, 240 volts, "C" series, 10KA duly ISI marked, complete all as specified and directedMake- HPL, Cat Part No- NTSPNC40 or equivalent in INDOASIAN/ Legrand as approved by GE complete all as specified and directed

S&F MCB SPN, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directedMake- HPL, Cat Part No- NTSPB6-32 or equivalent in INDOASIAN/ Legrand as approved by GE complete all as specified and directed

S&F Bldg Security light fittings LED 25 watts, including GI bracket bend to shape made out of GI pipe light grade of suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire all as specified and directed. Make- Crompton, Model-ASTRA NEO, Cat Part No-LSTS-25-CDL-M or equivalent in Havells/ Bajaj as approved by GE complete all as specified and directed.

M&L for Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length).

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mtr as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) .

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire.

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 10 Sqmm nominal cross section, 3 core, Circular, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified and directed. Make-Gloster/ Havells/ Finolex/ Universal Cables as approved by GE

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed(Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed(Excavation and earth work measured separately).

M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting un equal Tee 40X40X25mm dia including excavation, returning filling complete and all as directed and specified.

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/ road crossings, complete with and including clamps socket & elbow etc complete all as specified.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified.

M/s Rakesh Aggarwal

Ms Hari Singh