Name of work - Renovation and Modification in account section in

Amount

1) Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering - All work up to plinth level :

1.1) 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

2) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :

2.1) cement mortar 1:4 (1 cement : 4 coarse sand)

3) Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

4) Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

5) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

6) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

7) Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.

7.1)Size 50 mm

8) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

9) Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

10) Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

10.1) 1.0 mm thick

11) Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

12) Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

12.1) Hot finished welded type tubes

13) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

13.1) Size of Tile 600x600 mm

14) Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

14.1) Size of Tile 600x600 mm

15) Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

15.1) Size of Tile 600x600 mm

16) Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.

17) Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

17.1) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

18) Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :

18.1) GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

19) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

19.1) Water thinnable cement primer

20) Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

20.1) Two coats

21) Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall

22) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

22.1) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

23) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

24) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

24.1) In cement mortar

25) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

25.1) Of area 3 sq. metres and below

25.2) Of area beyond 3 sq. metres

26) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

26.1) For thickness of tiles 10 mm to 25 mm

27) Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

27.1) 75 to 80 mm dia pipe

27.2) 100 mm dia pipe

28) Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

29) Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

30) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

31) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

31.1) For fixed portion

31.1.1) Powder coated aluminium (minimum thickness of powder coating 50 micron)

32) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

32.1) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

33) Preparation of surface for laying waterproofing treatment by cleaning and repair of existing top surface to remove dust, fungus, vegetation and loosely adhering particles completely. All cracks and open/damaged brick to brick joints should be repaired with high strength polymer modified mortar and also the joints of outlet pipes and concrete /masonry are to be sealed with Acrybond mortar . In case of PVC pipes, the joints should be sealed with polymer modified mortar. All horizontal to vertical corners should be provided with corner fillets of size 50mm X 50mm using polymer modified mortar. (Surface area treated shall be measured for payment purpose). The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

34) Supplying and application on terrace waterproofing treatment to existing top surface of terrace. Laying waterproofing membrane on already prepared, cleaned & dry concrete surface by applying 2 coats of Acrycoats FR / Equivalent as per manufacturer specifications (single Component Fiber Reinforced UV resistance Waterproofing Eterion Coating) over a surface primed with Acrybond and Cement mixed with 1 : 1 ration @ 500gm per Sqm. In There total consumption of Acrycoat FR to be maintained @ 1.0 Kg. / sqm. Coating to be taken on full height of vertical parapet wall of preferably take it through parapet wall and terminated 200mm down the roof slab and wall joint. Water leakeg testing on treated surface as [per the direction of Engineer-in-charge. (Surface area treated shall be measured for payment purpose).

35) Providing and fixing 2 mm thick 16 to 19 mm wide PVC edge banding tape of approved quality for cupboard / wardrobe shutters including necessary hot glue by edge banding machine etc complete as per direction of Engineer-in-charge

36) Providing and fixing factory made hot pressed both side laminated flush door ready made shutter with one mm thick decorative laminate on both side confirming to IS:2202 (Part-I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grain or cross bands and face veneer on both face of shutters.

36.1) 35mm thick including ISI marked stainless steel butt hinges with necessary screws.

37) Providing and fixing 18 mm thick WPC (wooden polymer composit) board inside shelves, sides, back portion of cupboard or in drawer units etc. for specific size and 18 mm thickness, composed of wood dust (min 30% - 40% and remaining PVC, fungus/Acid/termite/water proof , fire retardent, formaldehyde free, virgin thermoplastic, single Extruded and screw-able/nail-able, having density of 680 - 720 kg/cum. and water absorption up to 1 % with approved make with necessary fixing arrangement and as per requirement complete as per direction of Engineer in charge.

38) Providing and fixing 6 mm thick WPC (wooden polymer composit) board for back portion of cupboard for specific size and 6 mm thickness, composed of wood dust (min 30% - 40% and remaining PVC, fungus/Acid/termite/water proof , fire retardent, formaldehyde free, virgin thermoplastic, single Extruded and screw-able/nail-able, having density of 680 - 720 kg/cum. and water absorption up to 1 % with approved make with necessary fixing arrangement and as per requirement complete as per direction of Engineer in charge.

39) Providing and fixing auto closing spring loaded hinges (hydraulic type) of HETTICH/ blum/or equivalent of approved brand to cupboard shutters with full theaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

40) Providing and applying plaster of paris putty of 4mm to 6mm thick thickness over plastered surface to prepare the surface even and smooth complete.

41) Providing and fixing roller blinds, the febric should be screen openness of 5% and composition of 75% PVC 25% polyester with fabric weight of 465 GSM with fire resistance grade of NSPA 701, BS 586 part- II with anodized aluminium channel weight, bracket and hangers etc. the fabric will be approved colour and shed of approved manufacturer complete. Make (VISTA/MAC/Marvel

42) Providing and fixing self adhesive frosted/decorative film on glass partition and glass door and windows of approved design and make all complete as per direction of Engineer-in-charge.

43) Providing and fixing cup board shutters with 18-19mm thick commercial block board as per IS : 1659 of approved make with necessary SS piano hinges of appropriate size etc. complete as per direction of Engineer In Charge.

44) Providing and fixing 12 mm thick frameless toughened glass in partition of approved brand and manufacture, including making necessary holes etc for fixing the fittings but excluding the cost of fittings all complete as per direction of Engineer-in-charge.

45) Providing and fixing Stainless door lock of Ozone make (Model-OPL-1)/Dorma / Hettich for glass door to be fixed at bottom of door i/c necessary cutting and making good the floor etc complete.

46) Providing and fixing H type handle of Ozone make (MODEL-OGH-55)/Dorma / Hettich 32 mm dia 457 mm long with necessary screws etc complete .

47) Providing and fixing wall to Glass connector of Ozone make (OGC-4A) /Dorma / Hettich Complete as per Direction of Engineer-in-charge

48) Providing and fixing Over Pannel Fitting of Ozone make (MODEL-OPF-1)/Dorma / Hettich Complete as per Direction of Engineer-in-charge.

49) Providing and fixing G.I. powder coated U shape Chanel & wall Angle in top For supporting the Toughened Glass as per direction of Engineering-charge.

50) Extra for using double charge vitrified nanotech high gloss with zero water absorption tiles of size 600 x 600 mm in place of normal vitrified tiles of 600x600mm.( Kajaria / Somany / Johnson / Orient)

51) Providing and Fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basid item) : with 5 mm thickness reflective glass (antilio from Saint Gobain or equivalent of ASI)

52) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Reception Table as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Aristo TBL 1650 LH RU 1200 PDL/ equivalent of Featherlite/ equivalent of Wipro) In this estimate Godrej Interio Aristo TBL 1650 LH RU 1200 PDL in reception table series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

53) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Table 1500 mm long and 600 mm width with ERU 900 with KBPT, pedestal and CPU trolley as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Upbeat 1500 x 600 + ERU 900 with KBPT + Pedestal + CPU Trolley/ equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Upbeat 1500 x 600 + ERU 900 with KBPT + Pedestal + CPU Trolley in table series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

54) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Chair as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Motion HB Chair/ equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Motion HB Chair in chair series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

55) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Chair as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Versa HB Chair/ equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Marvel HB Chair in chair series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

56) Supply and installation of reqired size, shape, design and colour Chair with Adjustable Armrests(as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej model no- Versa Mid Back / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Marvel Mid Back in chair series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

57) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Visitor Chair as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Versa Visitor Chair/ equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Marvel Visitor Chair in chair series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

58) Supply and installation of reqired size, shape, design and colour (as per enclosed drawing) Visitor Chair as per approved make and direction of Engineer- in-charge (Make-Godrej- Model no- Motion Visitor Chair/ equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Motion Visitor Chair in chair series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

59) Supply and installation of reqired size, shape, design and colour Storage Gain Main 500 with wooden Door (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- Gain Main 500 (H=2025mm,D=500mm,W=500mm) with Wooden Door / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Gain Main 500 (H=2025mm,D=500mm,W=500mm) Model " in Gain Main Series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

60) Supply and installation of reqired size, shape, design and colour Addon 1000 (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- Gain Addon 1000(H=2025mm,D=1000mm,W=500mm) / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Gain addon 1000 H=2025mm,D=1000mm,W=500mm) Model " in Addon 1000 Series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

61) Supply and installation of reqired size, shape, design and colour Table (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- Mingle 6 Str Table / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Mingle 6 Str Table in table series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

62) Supply and installation of reqired size, shape, design and colour SD2-Single Static Drive (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- SD2-Single Static Drive Cover Unit 2 Bay / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio SD2-Single Static Drive Cover Unit 2 Bay in optimizer series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

63) Supply and installation of reqired size, shape, design and colour LD2-Single Last Drive (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- LD2-Single Last Drive Unit 2 Bay / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio LD2-Single Last Drive Unit 2 Bay in optimizer series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

64) Supply and installation of reqired size, shape, design and colour TD-Twin Mobile Drive (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- TD2-Twin Mobile Drive Unit 2 Bay / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio TD2-Twin Mobile Drive Unit 2 Bay in optimizer series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

65) Supply and installation of reqired size, shape, design and colour Rail Pair 3 ft (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- Rail Pair 3 Ft / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Rail Pair 3 ft in series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

66) Supply and installation of reqired size, shape, design and colour Rail Pair 6 ft (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- Rail Pair 6 Ft / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Rail Pair 6 ft in series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

67) Supply and installation of reqired size, shape, design and colour SD2- Bay (457x 1980- KD) (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- SD2- Bay (457x 1980- KD) / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio SD2- Bay (457x 1980- KD in optimizer series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

68) Supply and installation of reqired size, shape, design and colour LD2- Bay (457x 1980- KD) (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- LD2- Bay (457x 1980- KD) / equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio LD2- Bay (457x 1980- KD in optimizer series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

69) Supply and installation of reqired size, shape, design and colour TD2- Bay (457x 1980- KD) (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- TD2- Bay (457x 1980- KD) /equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio TD2- Bay (457x 1980- KD) in optimizer series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio

70) Supply and installation of reqired size, shape, design and colour work station Penta 1350*1350(as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- Penta work workstation wish 1350x 1350 with KBPT, CPU trolley and pedstal and panel ht. of 1350 mm/ equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio Penta work workstation wish 1350x 1350 with KBPT, CPU trolley and pedstal and panel ht. of 1350 mm in work station series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

71) Supply and installation of reqired size, shape, design and colour work ECO Storage HDU 900 (width) x 1190 (Hight) (as per enclosed drawing) as per approved make and direction of Engineer- in-charge. (Make-Godrej Model No.- ECO Storage HDU 900 (width) x 1190 (Hight)/ equivalent of Featherlite/ equivalent of Wipro). In this estimate Godrej Interio ECO Storage HDU 900 (width) x 1190 (Hight) in storage series has been considered . In Case of other makes, technical specifications should be equivalaent and cost adjustment shall also be done if the equivalent make of lesser market price than Goderj interio)

72) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Make of Wire: Havells / Finolex / KEI / RR Kabel / Polycab)

72.1) Group-C

73) Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Make of Wire: Havells / Finolex / KEI / RR Kabel / Polycab)

74) Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Make of Wire: Havells / Finolex / KEI / RR Kabel / Polycab

75) Supplying and laying of ISI marked FR pvc insulated flexible copper cable of size 2 core x 1.5 sqmm of 1.1 kv grade including making connection etc. for communication between indoor and outdoor unit and other units, etc. through conduit complete as required. (Make of cable: Havells / Finolex / KEI / RR Kabel / Polycab / Gloster)

76) Supplying and laying of 3 core x 4 sqmm size pvc insulated pvc sheathed armoured copper conductor cable including making connections etc. as required. (Make of cable: Havells / Finolex / KEI / RR Kabel / Polycab / Gloster)

77) Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. (Make of Wire: Havells / Finolex / KEI / RR Kabel / Polycab)

77.1) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

77.2) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

77.3) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

77.4) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

78) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit/ FRPVC Trunking as required. (Make of Wire: Havells / Finolex / Polycab / KEI / RR Kabel)

78.1) 3 x 2.5 sq. mm

78.2) 3 x 4 sq. mm

78.3) 6 x 4 sq. mm

79) Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (Make of Wire: Havells / Finolex / Polycab/ Delton/ RR Kabel))

80) Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Make: Legrand / Havells Crabtree / L&T /Wipro North West / Schneider / GM)

80.1) 5/6 A Switch

80.2) 15/16 A Switch

80.3) 3 pin 5/6 A socket outlet

80.4) 6 pin 15/16 A socket outlet

80.5) Telephone socket outlet

81) Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (Make: Legrand / Havells Crabtree / L&T /Wipro North West / Schneider / GM)

81.1) 1 or 2 Module (75mmX75mm)

81.2) 3 Module (100mmX75mm)

81.3) 6 Module (200mmX75mm

81.4) 12 Module (200mmX150mm)

82) Supplying and fixing suitable size GI/PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make: Legrand / Havells Crabtree / L&T /Wipro North West / Schneider / GM)

83) Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. (Make: Legrand / Havells Crabtree / L&T /Wipro North West / Schneider / GM)

84) Providing and fixing FR PVC DLP trunking without cover of (105 mm x 50 mm) size on existing wall etc. as required.

85) Providing and fixing following accessories on the existing FR PVC trunking etc. as required.

85.1) FR PVC trunking full cover width 85 mm (Make: Legrand)

85.2) End Caps for 105 mm X 50 mm FRPVC (Make: Legrand)

85.3) Flat angle for 105 mm X 50 mm FRPVC (Make: Legrand)

85.4) Internal angle for 105 mm X 50 mm FRPVC (Make: Legrand)

85.5) External angle for 105 mm X 50 mm FRPVC (Make: Legrand)

85.6) Body Joint for 105 mm X 50 mm FRPVC (Make: Legrand)

85.7) Cover Joint for 85 mm width (Make: Legrand)

85.8) 1 Module arteor frame for 40 mm cover (Make: Legrand)

85.9) 6 Module arteor frame for 85 mm cover (Make: Legrand)

85.10) Modular 16/20A switch on the existing modular plate and switch box/channel including connection. (Make: Legrand)

85.11) Modular 6/16A multi socket on the existing modular plate and switch box/channel including connection. (Make: Legrand)

85.12) Supplying and fixing RJ-45 jack for networking point on the existing PVC box including termination testing etc. as required.

86) Supply and installation of recess mounting LED luminaire equipped with CRCA powder coating housing, anti glare polycarbonate diffuser with energy efficient electronic driver with following features:- Suitable for operating voltage and frequency: 130-300 V AC, 50 Hz; wattage not more then 36 Watts, Output lumens not less then 3300lm; CCT not less then 6500K; Dimension in mm (595x595); Normal surge protection 2.5kV; Powe factor not less then 0.9; Minimum IP protection 20. (Make: Philips / Panasonic / Wipro / Bajaj / Polycab / Halonix / Havells)

87) Supply and installation of recess mounting round/square LED luminaire equipped with CRCA powder coating housing, anti glare polycarbonate diffuser with energy efficient electronic driver with following features:- Suitable for operating voltage and frequency: 130-300 V AC, 50 Hz; wattage not more then 12 Watts, Output lumens not less then 650lm; CCT not less then 5700K; slim profile surface mounted down light square/round type; Normal surge protection 2.5kV; Powe factor not less then 0.9; Minimum IP protection 20. (Make: Philips / Panasonic / Wipro / Bajaj / Polycab / Halonix / Havells)

88) Supply and installation of wall mounting fan 400 mm sweep, suitable for operation on 230V, 50 Hz, AC Supply with inbuilt speed regulator etc. complete as required etc. as required. (Make :- Havells / Crompton / USHA / Bajaj / Orient) Colour of fan shall be finalized by Engineer-in-Charge)

89) Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(Make :- Havells / Atomberg / Bajaj / Orient / Crompton/USHA)

90) Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams, including painting the exposed portion of loop, all as per standard design complete.

91) Supplying and fixing extra down rod of 30 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

92) Supply and Installation of 250 mm sweep exhaust fan PVC body with louver shutter suitable for operation on 230V, 50 Hz, AC supply in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Make: Havells/ USHA/ Bajaj/ Orient/Crompton)

93) Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

93.1) 1 run of cable

93.2) 2 run of cable

94) Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make: L&T / Schneider / Legrand / Havells / C&S / Siemen / ABB)

94.1) 100 A,30KA,FP MCCB

94.2) 125 A,36KA,FPMCCB

95) Providing and fixing 100A, 16KA, TP, MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make: L&T / Schneider / Legrand / Havells / C&S / Siemen / ABB)

96) Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make: L&T / Schneider / Legrand / Havells / Siemens / ABB)

96.1) 8 way , Double door

96.2) 12 way , Double door

97) Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision of 100 amps 4 Pole 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) including sign writing on DB (Make: AC / Normal / Emergency Power) etc. as required . (Make: L&T / Schneider / Legrand / Havells / Siemens / ABB)

97.1) 8 way (4 + 24), Double door

97.2) 12 way (4 + 36), Double door

98) Supply and installation of SS enclosure duly powder Coated paint for housing incoming MCCB 4P, of appropriate size with incoming and outgoing opening, suitable to accommodate upto 70sqmm, 3.5 core aluminium armoured cable, with louvers for heat dissipation and mounting hole for easy wall mounting. (matter: AC / Normal / Emergency Power) etc. as required .

99) Supplying and fixing of following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: AC / Normal / Emergency Power) etc. as required . (Make: L&T / Schneider / Legrand / Havells / Siemens / ABB)

99.1) Single Pole, 10A

99.2) Single Pole, 16A

99.3) Single Pole, 25A

99.4) Single Pole, 32A

99.5) Double Pole, 32A

99.6) Triple pole and neutral, 32A

100) Supplying and fixing following rating, double pole, 240 V, MCB 'C' Series in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make :- L&T / Schneider / Legrand/ Havells / Siemens / ABB)

101) Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make :- L&T / Schneider / Legrand/ Havells / Siemens / ABB)

102) Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. (Make: L&T / Schneider / Legrand / Havells / Siemens / C&S)

103) Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

103.1) For 8 way, Double door SPN MCBDB

103.2) For 12/14 way, Double door SPN MCBDB

104) Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

105) Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

106) Supplying and installing 150 mm width X 50 mm depth X 1.6 mm thickness of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

107) Supplying and installing 150 mm width X 50 mm depth X 1.6 mm thickness of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

108) Supplying and installing 150 mm width X 50 mm depth X 1.6 mm thickness of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

109) Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 x 16 sq. mm size on cable tray/ open duct/ wall as required. (Make: Havells / Finolex / KEI / RR Kabel / Polycab / Gloster)

110) Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4 x 25 sq. mm size on cable tray/ open duct/ wall as required. (Make: Havells / Finolex / KEI / RR Kabel / Polycab / Gloster)

111) Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 35 sq. mm size on cable tray/ open duct/ wall as required. (Make: Havells / Finolex / KEI / RR Kabel / Polycab / Gloster)

112) Suplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 35 sq. mm size with medium class GI pipe as required. (Make of cable: Havells / Finolex / KEI / RR Kabel / Polycab / Gloster. Make of GI Pipe: TATA / Bansal / Nezone / Jindal)

113) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

114) Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 25 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

115) Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 35 sq. mm (32mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

116) Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (ISI marked)

117) Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (ISI marked)

118) Cutting of existing cement concrete floor for 300 mm wide x 25 mm deep to fix raceway including making good the same with proper cement mortar etc. as required.

119) Supplying and fixing 300 mm x 25 mm, 3 compartment type metal/GI raceway IP 20 and fixing in floor with all accessories etc. as required. (Make: Legrand)

120) Supplying and fixing GI Junction box/floor box for 300 x 300 x 65-90 mm size etc. as required. (Make: Legrand)

121) Supplying and fixing of 300 mm x 25 mm size GI bracket for fixing the raceway in floor etc. as required. (Make: Legrand)

122) Supplying and fixing G.I. coupler for 300 mm x 25 mm size GI raceway in floor etc. as required. (Make: Legrand)

123) Supplying and fixing G.I. vertical riser for 300 mm x 25 mm size GI raceway in floor etc. as required. (Make: Legrand)

124) Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50 Degree C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions at 50% load shall not be less than 7 and IEER not less than 6.5 (Make : Blue Star/ LG/ Carrier/ Toshiba/ Mitsubishi / Hitachi)

125) Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V +/- 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DB and 19 Degree C WB temperature. (Make: Same as outdoor unit)

126) Supply, Installation, testing and commissioning including vaccumisation and nitrogen testing of following nominal sizes of soft / hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, Y-type joints wherever required, with adjustable with ring type hanger supports, jointing / brazing including accessories, insulated with XLPE class - O tubular insulation / with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specifications etc. as required:

127) NOTE: (1) The copper piping and piping circuit should be with minimum number of joints, which shall be attained by: (a) Using one end expanded tubes (b) bending the tubes instead of using elbow joints wherever 90 degree bending is required (2) Piping should be routed at site in such a manner, that brazed joints in the refrigeration piping are kept to a minimum (3) The makes of tube fittings shall be same as that of tubes (4) The thickness of fittings used shall be same as that of the pipe

127.1) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

127.2) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

127.3) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

127.4)15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

127.5) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

127.6) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

127.8) 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

127.9) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

128) Supplying and laying of ISI marked CPVC pipe of 1 inch dia for draining of sweated water from AC evaporator unit including providing tee, joints, elbows wherever necessary etc. complete as required.

129) Fabricating, Providing and fixing M.S. iron frame fabricated with M.S. angle of size 50mm x 50mm x 6mm for resting the condenser unit on the outside wall / roof of the building duly supported from the bottom with same angle iron and finally making good the damages including painting the framework etc. complete as required.

130) Making RCC foundation for resting outdoor unit of VRV AC of size 1100mmx800mmx300mm with 1:2:4 (1cement,2coarse,4stone aggregate) complete with 8mm dia MS bar for reinforcement along with centering & shuttering ,3/4 no. complete as required.

131) DDOME CAMERA - Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Camera, 1/3.2" CMOS, 3 MP @ 25fps or better, triple stream, Min. Illumination required 0.2 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 2304×1303p, triple stream, 3mm - 9 mm motorized focus & zoom lens, Backlight Compensation, 3DNR, Privacy Mask, 3 IR LEDs Smart IR with upto 20m IR distance, H.264& MJPEG, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, IP 66/67 & IK10, Alarm: 1 In & 1out, PoE, H.264 High Profile and MJPEG, PoE Class 3/ 12V DC/24VAC, Die- Cast Aluminum Construction, Having Operating temp range: –30°C to 55° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CE, EN, FCC &RoHS compliant. Approved Makes: Honeywell, Pelco, Bosch & Axis.

132) NVR - Supply, Installation, Testing & Commissioning of 8 Channel NVR with Dual-core embedded processor, Embedded LINUX, BIDIRECTIONAL AUDIO 1 channel input; 1 channel output; RCA, RESOLUTION 1920 x 1080; 1280 x 1024; 1280 x 720; 1024 x 768, OSD Camera title; Time; Video loss; Camera lock; Motion detection; Recording, COMPRESSION H.264 / MJPEG, BIT RATE* 48 to 8192 Kbps, RECORDING MODE Manual; Schedule (Regular [Continuous], Motion Detection, Alarm, Motion Detection+Alarm); Stop, SUPPORTED PROTOCOLS** HTTP; TCP/IP; IPv4/IPv6; UPnP; RTSP; UDP; SMTP; NTP; DHCP; DNS; IP filter; PPPoE; DDNS; FTP; Alarm server; IP search, ETHERNET 1 x RJ-45 port (10/100/1000 Mbps, USB 2 ports: USB 3.0 on rear panel; USB 2.0 on front panel. The proposed system should provide 15 days recording. Approved Makes: Honeywell, Pelco, Bosch & Axis.

133) LED - Supplying, Installation, Testing & Commissioning of 32" LED TV with 1920x1080 full HD resolution and as per specifications attached suitable for mounting on wall including connection etc. Approved Makes: - Sony, Panasonic & Samsung.

134) HARD DISK - Supply, Installation, Testing & Commissioning of 8 TB Video Hard Disk (Make: Sony / Seagate / Samsung / Toshiba)

135) PORT SWITCH - Supply, Installation, Testing & Commissioning of 8 Port managed PoE Switch with 2 SFP port, minimum 8 nos. 10/100/1000 Base-T ports with PoE+ capability and minimum 60W of PoE Power and additional 2 nos. Combo uplink ports loaded with 2 nos. of SMF modules Shall have minimum 20 Gbps of switching fabric and 14.88Mpps of forwarding rate. Should support IEEE Standards of Ethernet: IEEE 802.1D, 802.1s, 802.1w, 802.1x, 802.3ad, 802.3x, 802.1p, 802.1Q, 802.3, 802.3u, 802.3ab, 802.3z, 802.3az, 802.3af, 802.3at. Switch should support port security, DHCP snooping, Dynamic ARP inspection, IP Source guard, BPDU Guard, spanning tree root guard and IPv6 First Hop Security. IPv6 QoS, IPv6 ACL, Multicast Listener Discovery (MLD v1/2) snooping, IPv6 applications and IPv6 First Hop Security. Switch should be IPv6 Certified/IPv6 logo ready. Approved Makes: - Cisco.

136) 17U RACK - Supply, Installation, Testing & Commissioning of 17U rack. Approved Makes: - Rittal, Comrack & Valrack.

137) CAT 6 CABLE - Supply, Installation, Testing & Commissioning of CAT 6 Cable. Approved Makes: - Molex, D-link & AMP.

138) PVC CONDUIT - Supply, Installation, Testing & Commissioning of 25mm PVC Conduit On Surface. Approved Makes: - BEC, Kalinga & AKG.

139) Routine, Preventive and Breakdown maintenance of [a] VRF/VRV AC unit including its all accessories, condensers, evaporator units, time to time checking of refrigerant leakage, electrical circuits, etc. for smooth operation of the entire AC units during the defect liability period of 1 year after date of commissioning as per maintenance schedule & [b] Entire CCTV System during the defect liability period of 1 year after date of commissioning as per maintenance schedule (Completely free of cost): 1st Year

139.1) Routine, Preventive and Breakdown maintenance of [a] VRF / VRV AC unit including its all accessories, condensers, evaporator units, time to time checking of refrigerant leakage, electrical circuits, etc. for smooth operation of the entire AC units after defect liability period of 1 year from the date of commissioning as per maintenance schedule. Any breakdown shall be attended within 4 hours of reporting. Spare parts required during breakdown maintenance shall be arranged by the Institute. [b] CCTV System after defect liability period of 1 year from the date of commissioning as per maintenance schedule. Any breakdown shall be attended within 4 hours of reporting. Spare parts required during breakdown maintenance shall be arranged by the Institute. (N.B.: 01 Job means during a period of one year)

139.1.1) 2nd Year

139.1.2) 3rd Year

139.1.3) 4th Year

139.1.4) 5th year

139.1.5) 6th Year

Credit of Dismentled Item

140) Fire wood from damaged cup-boards etc.

141) Old flush door shutter of various thickness and sizes with fitting etc.

142) Old M.S section / steel bars scrap / G.I pipes / C.I pipes etc.

143) Old scrap aluminium sections of various size and thickness.

144) G.I. Pipe 15 m to 40 mm dia

145) C.I. Pipe upto 100 mm dia including fittings

MODERN CONCEPT CONSTRUCTIONS

srishti associates

Confoss Construction