Repair and Maintenance of Infrastructure assets in R-II Division during 2025-26. SH - Repair of footpath and boundary wall near AB 77, Shahjahan Road.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Taking out of stone slab flooring or precast c.c. slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 20 mm nominal size Recycled Aggregate (RA))

Providing & laying in footpath and pavement etc. factory made precast cement concrete slab of size 300x300x60mm of mix M-35 grade manufactured through fully automatic hydraulically presssed machine through PLC panel and finished smooth as per shape, size and pattern over a base of 12mm thick average cement mortar 1:5(1cement:5coarse sand) and filling joints with fine sand etc complete as per the direction and instructions of Engineer in charge. (Nothing extra shall be paid to be contractor for laying slabs in approved pattern in using precast slabs of required shapes at end of footpath)

Providing and laying 80mm thick faciory made cement concrete interlocking paver block of M -40 grade made by PLC block making machine with strong vibratory compaction in required stages, of approved size,colour, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)

Providing and fixing D.Q stone floring of avarage size 100x100mm and 70mm to 80mm thick hand cut laid over 20mm(average) thick base of cement mortar 1:6 (1 cement:6 coarse snad) of approved design/shape with joints and pointing with cement mortar 1:3( 1 cement :3 C/sand) all complete as per direction and entire satisfaction of Engineer-in-charge.