Setting up of 47 bedded ICU at Rangia Model Hospital under Kamrup(R) District, Assam (Installation of Medical Gas pipe line and Installation and Commissioning of plant room equipment)

Amount

Medical Gas Pipeline System: Supply and installation, Testing & Commissioning of Terminal Units (Gas Outlets) with Probes / Adaptes as per CE marked. The outlet will be equiped with primary and a secondary check valve with suitable pressure for (O2 Cleared for medical gas and pressure tested, inlet pipe can be swiveled 360 degree for ease of installation as per specified and directed)

Supply and installation, Testing & Commissioning of O2 flow meter as per CE marked made with chrome plated brass bodey, graduated flow tube and cover made of polycarbonate 7 unbreakable. Adjustable flow by needle valve (know) with micrometric regulation. Humidifier bottle is made of unbreakable polycarbonate material and is autoclavable.

Supply and installation, Testing & Commissioning of Terminal Units (Gas Outlets) with Probes / Adaptes as per CE marked. The outlet will be equiped with primary and secondary check valve with suitable pressure for complete all as specified and as directed for the following. For Compressed air (4 Bar)

Supply and installation, Testing & Commissioning of Terminal Units (Gas Outlets) with Probes / Adaptes as per CE marked. The outlet will be equiped with primary and secondary check valve with suitable pressure for (Vaccume) Cleaned for medical gas and pressure tested, inlet pipe can be swiveled 360 degree for ease of installation as per specified and directed.

Supply and installation, Testing & Commissioning of ward vaccume unit as per CE marked with Regulator alongwith vaccume gauge, collection jar of 600 ml. capacity reusable plastic collection bottle with over flow safety tap wall mounted type with bracket complete all as specified and as directed.

Copper Pipes as per Medical Grade: 12 mm od X .7 mm thickness

15 mm od X .9 mm thickness

22 mm od X 9 mm thickness

28 mm X .9 mm thickness

42 mm X 1.00 mm thickness

Supply and Installation, Testing & Commissioning of zonal valve box are fully designed to suit multiple operational requirement and ensure considering space for mounting. The configuration for valve boxes are described. i) 3 Gas Services – O2, Vacuum, Air

Supply and Installation, Testing & Commissioning of area line pressure alarm with display of various faults indications and capable of monitoring maximum 4 medical gas service by means of pressure switches etc. with audible warning with automatic reddit when the gas service return to normal as per standard specification CE marked all as specified and as directed for the following area line pressure alarm. i) 3 Gas Line Pressure Alarm

Supply and Installation, Testing & Commissioning of isolation valves with brass body with nickel plate valve operating handle suitable for 12mm Od copper pipe to 42mm Od copper pipes with brass adapter as per standard specification all as specified and sirevted for the following isolations. 12 mm od X .7 mm thickness

15 mm od X .9 mm thickness

22 mm od X 9 mm thickness

28 mm X .9 mm thickness

42 mm X 1.00 mm thickness

Supply, Installation, Testing & Commissioning of Low Pressure Tubing Flexible having antistatic Core as per ISO standards with proper colour coded for O2, N2O, Compressed Air and Vacuum complete all as specified and directed. 5 mtr long

Supply and Installation, Testing & Commissioning of Bed Head Panel 5 ft Long CE Marked. These are panels as per customer choice of coulour to maintain the aesthetics of the hospital along with accessories like 1 No. of IV hook 1 No. of utility BP Basket 1 No. of Monior tray 1 No. of Aluminum Clamp for ward vacuum unit 1 No. of LED examination Light and 2 No. of 6/16 amp Anti bacterial Switch and sockes.

Supply and Installation, Testing & Commissioning of Oxygen Manifold Extendable type 12+12 size compatible as per CE marked with middle frame with chain of individual Cylinder and high pressure annealed copper tail pipe with 1 end having brass adaptor and other end suitable for manifold non return valve and manifold will have 10 brass non return valve for individual Oxygen Cylinder, middle frame with cercumferential MS felt duley power coated all as specified and as directed.

Supply and Installation, Testing & Commissioning of semi Automatic Gas Control panel for O2, two stages of pressure regulators will be provided in the control cabinet for pressure regulation. One delivery pressure regulator.

Supply and Installation, Testing & Commissioning of 5+5 Cylinder Emergency Oxygen Manifold as per CE Marked with two stage high flow rate regulator with NRV for every cylinder and copper tail pipe with top and middle frame for Oxygen.

Supply and Installation, Testing & Commissioning of 10 Hp each double stage Duplex High Pressure Air Compressure each are designed for high pressure applications. These Compressures have extra heavy duty components and are designed for minimum maintance and maximum performance.

Supply, Installation, Testing & Commissioning of 1000 ltrs Air receiver tank.

Supply, Installation, Testing & Commissioning of Air Dryer.

Supply, Installation, Testing & Commissioning of Bacterial Filter assembly.

Supply, Installation, Testing & Commissioning of pressure reducing system with two numbers pressure regulators.

Supply, Installation, Testing & Commissioning including connection of complete Vacuum plant. The pump should be achieve vacuum upto 737mm (290’ Hg) for single stage upto 754.4mm (29.7 Hg) for two stage configuration at sea 10 HP each Double stage vacuum pump including necessary vacuum accessories like silencer, receiver tank (1000 ltr.) & vacuum bacteria filter.

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 4 Core, 2XWY 2XFY 50.00 Sq. mm.4 Core U.G. armoured cable

1 SQ MM COPPER WIRE

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make) 160A

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of 8 SWG Copper earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Plant Room Civil Works: Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (b) In hard/ dense soil

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 4 sand :8 coarse aggregate by volume

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (a) Using 38mm thick plank.

Sides of tie beams, grade beams etc. at or below ground level. (a) Using 38mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (i) Using 38mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (i) Using 38mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (i) Using 38mm thick plank

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

(B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) A)112 mm thick wall (a) In cement mortar in proportion 1:4 (1 cement:4 sand)

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately) B) With 1st class local wood (Gamari/Hollock/Bonsum ) (i) 40 mm thick.

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998

Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor / Wonder Roof / JSW Steel / Spectrum or equivalent as directed by the Departement (iv) 0.55 mm thick.

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side a) In cement mortar 1:3

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (ii)5mm frosted glass

Providing wood work in frame of false ceiling partitions etc.sawn, wrought, framed hoisted and fixed in positon with spikes, nails, M.S flat,angle/ cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surfaces of the timber (M.S flats, angle cleats, and bolt and nuts required for flat, angle cleats wherever necessary shall be measured and paid separately) (b) With Gamari/ Bonsum/ Sundi

Providing, fitting and fixing hard board sheet ceilling with approved quality with necessary nails, wood screws including 1st class local wood 50mm x 12mm ( hollock/ bonsum/ sundi ) beading including paining two coats to timber beads complete as directed ( ceilling joist to be measured and paid separately ). (b). 4.5 mm thick

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC iii)Executive range-2 (Sizes 600 mm x 600mm and above) Somany made- VC Shield (Group- 25) (605x605) mm a) Deluxe -VC

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

Applying one self-priming coat of acrylic emulsion paint of approved brand, thinning by adding water per the specification of manufacturer over freshly plastered wall surface after throughly brooming the surfaces free morter droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department. b) Unicem Raksak

Finishing wall with two coats of acrylic emulsion exterior paint of approved brand of required shade, thinning by adding water as per the specification of manufacture after thoroughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. b) Unicem Raksak

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Electrical Works

OM CONSTRUCTIONS

M/S MAHAABALA CONSTRUCTION PVT. LTD.