PROVISION OF CERTAIN SANCTIONED WORK AT 3 BRD AF UNDER GE (AF) MC CHANDIGARH

Amount

Job No. 3BRD/MW/01/2025-26

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of UPVC casing and caping/UPVC Mini Trucking of size 25 mm x 12 mm ,white in colour and its all accessories and its all accessories( bend,elbow,coupler) and modular PVC Surface boxes of for modular fittings including modular outer mirror finish /glass finish cover plate with inner frame of make Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea)/Goldmedal(Nixon Quorra) with inner frame suitable for cover plate as per site requirement for mounting modular switches, sockets, etc including earth wire of PVC insulated (FRLSH) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II all as directed, as described for One exhaust/ceiling fan controlled by one way modular switch 6 amp complete. :- UPVC Casing caping Make-Precision/Astral/Polycab

All as per item No 2 but One 2-in-1, 3 pins 5 Amps socket point controlled by modular switch 6 Amps on independent board.

Supply and Fixing Modular mirror finish socket shutter type, 2-in-1, 3 pins 6 Amps ,ISI marked, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make(model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nixon Quorra)

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make(model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nixon Quorra)

Supply & Fixing Modular fan Regulator electronic step type 100 watt ,ISI marked, 2 Module complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nixon Quorra)

Supply and fixing wall mounted fan of sweep 450 mm, 100 CMM,90 W,1350 RPM,Three number aluminium aerodynamic blades,3 speed controller ,silent operation,black in colour ,portable type ,operating voltage at 220-240 V with all mounting accessories complete all as specified and directed. Make-Goldmedal/Orient/Almonard

Supply and fixing pedestal fan of sweep 450 mm, 100 CMM,90W,1350 RPM,Three number aluminium aerodynamic blades,3 speed controller ,silent operation,black in colour ,operating voltage at 220-240 V with all mounting accessories complete all as specified and directed. Make-Goldmedal/Orient/Almonard

Supply and fixing BLDC Mist Pedestal fan of sweep 450 mm,Max power consumption 75 Watt,6 Litre storage tank ,5 Number of blades operating voltage at 220-240 V with all mounting accessories complete all as specified and directed. Make-Havai/Eurocraft/Kuhl

Supply and fixing ceiling fans complete with aluminium blades, down rods, suitable for electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 215 CFM with service value 6.00 BEE. Five star rated with brushless copper wound direct current motor (BLDC )complete all as specified and directed.Make-Havells / Bajaj /Goldmedal

Supply and fixing anchor fastenor for fixing of ceiling fan 1200 mm sweep in existing ceiling all as specified and directed .

Supply and fixing Exhaust fan steel body 450mm, operating voltage at 220-240 V, No of blades 04, aerodymaic design, 1400 RPM, 3602 CFM,Max Power consumption 410 W, sound level not more than 70 DB including anchor fastners and all mounting accessories complete all as specified and directed. Make : Havells/ Bajaj/ Goldmedal.

Supply and fixing Exhaust fan 250mm sweep,810 CMH,37 W, non metallic type alongwith GI louvers complete suitable to work on AC , single phase, 230 Volts, 1100 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm all as specified and directed .Make-Havells / Bajaj /Goldmedal

S&F mild steel tube axial flow fan industrial type 1000 mm dia,55000 CUM/Hr (32000 CFM) AC 415 Volts 50 Hz, 1440 RPM,12.5 HP,fire retardent body,with capacity to withstand 400 Degree Celcius for 02 hours, with flow from motor to impeller,with motor position at the centre of impeller with provision of Wire guard (Same as manufacturer make ) installed at both the end,terminal box, view port with totally enclosed protection of class "H" with minimum of IP 65 protection, with provision of vibration isolater mounts, Impeller of aluminium alloy and allied works including cutting hole in existing window and the fan and suitable capacity of motor unit and tested as per EN:14986,EN:13857,EN:13463 including making provision of fan in existing window by block masonary and plastering work followed by making good (i.e. plastering in cement mortar 1:6, one coat of putty and two coats of Apex paint) all as specified and directed all as specified and as directed.Make-Almonard/Crompton/Simo

M&L Making Circle hole of size 450 mm sweep in existing wall for metallic Exhaust fan followed by making good (i.e. plastering in cement mortar 1:6, one coat of putty and two coats of Apex paint) all as specified and directed.

M&L Making Circle hole of size 1100 mm sweep in existing window by cutting,welding for axial flow fan followed by making good (i.e. block masonary, plastering in cement mortar 1:6, one coat of putty and two coats of Apex paint) all as specified and directed.

M&L Making Square hole of size 250 mm sweep in existing wall for PVC Exhaust fan followed by making good (i.e. plastering in cement mortar 1:6, one coat of putty and two coats of Apex paint) all as specified and directed.

Material and labour Stainless steel net/jali guard of size 1200 mm made from stainless steel flat iron 25 mm x 4 mm upto 7.20 meter length and SS Net suitable for 1000 mm axial flow fan fixed on outer and inner wall by anchor fastener all as specified and directed by engineer in charge

Material and labour stainless steel net/jalli of size 600 mm made from stainless steel flat iron 25 mm x 4 mm upto 3.60 meter length and SS Net suitable for 450 mm exhaust fan fixed on outer wall by anchor fastener all as specified and directed by engineer in charge

Material and labour for Sub Main Wiring with Four run single core 4 Sqmm (nominal area) multi stranded copper conductor FRLSH PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including UPVC casing and caping/UPVC Mini Trucking of size 25 mm x 12 mm ,white in colour including standard fittings such as Tees, junction, bends etc., with and including Two run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLSH PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity complete all as specified and directed. Note:- Four run of 4 Sqmm + Two run of 4 Sqmm for earth wire + One RM of UPVC casing caping / trucking shall be measured as one RM.

Material and labour for Sub Main Wiring with Four run single core 10 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including UPVC casing and caping/UPVC Mini Trucking of size 30 mm x 15 mm ,white in colour including standard fittings such as Tees, junction, bends etc., with and including Two run of continuous multi stranded copper conductor 10Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100 volts grade colour code cable for earth continuity complete all as specified and directed. Note:- Four run of 10 Sqmm + Two run of 10 Sqmm for earth wire + One RM of UPVC casing caping / trucking shall be measured as one RM.

Supply and fix TP&N Vertical Loadline distribution board, 4 Way, Double door, IP 43 rated, concealed in wall with Copper bus-bar 250Amp, neutral link, earth bar and din rail ,415 V, with all conections including fitting with 160 Amps MCCB complete all as directed.

Supply and fix MCB TP 415 Volts 32-40 Amps, C Curve with breaking capacity 10 Ka, 50 Hz complete all as specified

Job No. 3BRD/MW/04/2025-26

Supply and installation high wall inverter type split AC of cap 2.0 TR (white color) indoor and outdoor complete made up of copper condenser tube , filled with latest eco friendly refrigerant with cordless remote control unit and with in built air filter for better indoor air quality with 5 star rating, auto restart, including copper tube upto 5 mtr and 3 core 2.5 Sqmm wire upto 5 meter including Wall stand for outdoor and indoor unit with suitable size PVC pipe having nylon threaded reinforcement pipe for condensed water upto 15 meter complete all as specified and directed. Make: Daikin/O General/Mitsubishi Electric

Supply and fixing of MCB protected modular socket with Modular MCB 20 Amps built in MCB+ 20 Amps Top + Socket 20 Amps with concealed metal sheet steel enclosure with inner mounting frame and outer mirror /glass finish modular outer cover for mounting complete concealed in wall including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directedall as specified and directed. Make(model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nixon Quorra)

Supply and fixing Motar starter switch 25 Amps ,2 Module with Red and green Button with concealed metal sheet steel enclosure with inner mounting frame and outer mirror /glass finish modular cover for mounting complete concealed in wall including making good(i.e plastering in cement mortar 1:6 ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed all as specified and directed. Make(model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nixon Quorra)

Material and labour concealed Sub Main Wiring with two run single core 4 Sqmm (nominal area) multi stranded copper conductor FRLSH PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including concealed in wall UPVC Conduit 25 mm dia ,white in colour and its all accessories and its all accessories( bend,elbow,coupler) with and including one run of continuous multi stranded copper conductor 4Sqmm (nominal area) FRLSH PVC insulated and unsheathed 1100 volts grade colour code cable for earth continuity including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed all as specified and directed. Note:- Two run of 4Sqmm + One run of 4Sqmm for earth wire + One run of UPVC conduit shall be measured as one RM.

Supply and fixing in replacement of MCB Single pole 6 to 32 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. Make: Havells/Legrand/ABB

Job No. 3BRD/MR/04/2025-26

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Supply and fixing factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) moulded door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC ultichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer in-charge.

Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.

Supply only plain sheet glass 5.5 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.

Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin, anodized type B-21 of size 100 mm complete all as specified and directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and directed.

S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as specified and directed.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

S&F for Aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Job No. 3BRD/MR/03/2025-26

M&L for Excavation in trenches n.exc. 1.5 wide and n.exc. 1.5 m deep and getting out in soft/loose soil for foundation etc complete all as specified.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M & L for design mix reinforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in foundation incl raft footing, foundation beams,plinth beams,bases for columns, cantilevers, bressummers etc complete all as specified and as directed.

M & L for design mix renforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in Columns,Pillars,Piers,Posts and struts etc complete all as specified and as directed.

M & L for design mix renforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in Lintel beams, Roof beams, cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and as directed.

M & L for design mix reinforced cement concrete M-30 ( Using 20 mm graded stone aggregate) as in Chajjas complete all as specified and as directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 500 D complete all as specified and as directed.

M&L TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 500 D complete all as specified and as directed.

M &L for rough finished flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M & L for fair finished square,rectangular and polygonal Formwork to sides of pillars, posts, struts, piers, columns and stanchions.

M & L for fair finished surface of concrete flat Formwork to chullah hoods, chajjas, troughs and similar items including edges

M & L for flat formwork to fair finished surface of concrete flat, sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for brick work subclass "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1: 4, complete all as specified and directed.

M&L for rendering in two layer i.e.5mm thick in CM 1:4 including with mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished fair & even without using extra cement on all as specified.(Note WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface where undulation found with cement putty etc complete all as specified and directed.

M&L for preparation appling Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004 ,Alkali & fungal resistance ,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre /10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10 sqm over new surfaces.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry joint free and pointed in coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6, complete all as specified.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 75mm thick as in levelling course, sub-floors and paving etc complete all as specified.

M&L for glazed ceramic designe coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in cement mortar (1:4) complete all as specified.

M&L for 16-18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over and including 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match Granite Stone including grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

Rounding ( chamfering) to edge of marble/granite slab edge with mirror polishing such complete complete all as specified.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed.

S & F for Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick (style)with 2,4 or 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified.

Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.

Returning and filling in trenches including spreading, leveling n.exc 25 cm thick including watering, well ramming.

Removing the excavated soil to a distance exc 50 mtrs and n.exc 100mtr and depositing where directed at a level n.exc 1.5m above the starting point.

S&F for 110mm dia PVC (SWR) (ISI Marked) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

S&F for 75mm dia PVC (SWR) (ISI Marked) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius.

S&F PVC (SWR) vent cowl, 75mm dia.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.

S&F HD PVC drainage pipes SN8 110mm dia in any length with rubber ring joints laid in trenches all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm aggregate for Concrete bed to 110 mm dia drain pipes of including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

S&F for Vitreous china ware counter wash hand basin oval shape of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and directed.

S&F Vitreous China urinal flat back size 465 X 355 X 265mm white with grating and union for discharge pipe PVC connection and outlet pipe complete all as specified and directed.

S&F for 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts (Make : Prayag Cat No. PIS-14H) or equaivalent in Jaquar / GEM / SS Global.

S&F for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia(Make :Prayag Cat No. PIS-08) or equaivalent in Jaquar / GEM / SS Global.

S&F for two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cart Part No PIS-12 H) or equaivalent in Jaquar / GEM / SS Global.

S&F for angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cat No. PIS-10 H) or equaivalent in Jaquar / GEM / SS Global.

S&F for stop cock cast copper alloy regular body 15 mm (male thread) fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayag Cat No. PIS-26 H) or equaivalent in Jaquar / GEM / SS Global.

S&F for vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified.

S&F for PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.

S&F for Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange. (Make : Prayag Cat Part No. BA-80) or equaivalent in Jaquar / GEM / SS Global.

S&F for Brass chromium plated toilet paper holder. (Make : Prayag Cat Part No. BA-38) or equaivalent in Jaquar / GEM / SS Global

S&F for Brass chromium plated Soap dish holder. (Make : Prayag Cat Part No. BA-45) or equaivalent in Jaquar / GEM / SS Global

S&F for Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook. (Make : PrayagCat Part No. BEA-41) or equaivalent in Jaquar / GEM / SS Global

S&F for PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified.

S&F 20mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 25mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engr-in-Charge.

S&F for rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed with angle cleats or other connecting plates Fe 410-w (Gde-E-250) quality A complete all as specified and as directed.

S&F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality-A complete all as specified and as directed.

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated / trapezoidal section of steel sheet 0.50mm thick of any colour (AZ-150) having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

S&F for pre painted Galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour (AZ-150) having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F Rotational moulded Polyethylene [HDPE] Water Tanks, White colour, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed by Engr-in-Charge.

S&F for Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engr-in-Charge.

M&L for low density polyethylene (LDPE) pipes of 50mm, pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed by Engr-in-Charge.

Note:- Amount of credit of Rs. 11750 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

HARISH SALES CORPORATION (BID ID -3408923)