Himachal

Technical Eval

Works

Civil Works

SDRF/2025/451 Restoration of rain damages LWSS Panjarar in Tehsil Barsar Distt. Hamirpur HP

HP Irrigation and Public Health

Sub Division Bhota | Hamirpur, Himachal Pradesh

Amount: ₹4.5 LCloses: 6 Jul 2026Closed

Timeline

Published25 Jun 2026
Closed6 Jul 2026
Technical Evaluation25 Aug 2026
Award—

Bids

5 Bids25 Aug 2026

#	Company	Status
1	DHANANJAY SINGH SLATHIA Accepted-Technical	Accepted-Technical As eligible
2	M/S Anil Trading And Engineering Works Accepted-Technical LOWER BAZAR SARKAGHAT DISTT MANDI H P	Accepted-Technical As eligible
3	SS ENGINEERING WORKS Accepted-Technical HAMIRPUR ROAD NEAR BUS STAND UNA DISTT UNA HP \| UNA \| HIMACHAL PRADESH \| 174301	Accepted-Technical As eligible
4	Ssumit Sharma Accepted-Technical	Accepted-Technical As eligible
5	M/ Shiv Shakti Traders Not Admitted-Fee/PreQual/Technical LAXMI BAZAER TEHSIL JOGINDERNAGAR DISTT MANDI HP \| MANDI \| HIMACHAL PRADESH \| 175001	Not Admitted-Fee/PreQual/Technical Not Complied with technical specification

Tender Value

₹4.5 L

EMD Value

₹9,000

Closing Date

6 Jul 2026, 11:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer

Address

EE JSV Division Barsar

Work Description

Providing and installation of pumping machinery in Barsar Constituency

Tender Information

Tender ID

2026_HPIPH_137550_1

Reference Number

NIT No. 3546-645 dated 25.06.2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

30 days

Location

Sub Division Bhota

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredEarnest Money online or offline Rupees 9000/-Exemption shall not be allowed (.pdf)

RequiredTender form cost Rs.350/-only online/offline (.pdf)

RequiredValid contractor Registration (.pdf)

RequiredUndertaking PWD Form 6 and 8 regarding carefully studied all the terms and conditions (.pdf)

RequiredGST Registration No. EPF Registration No. Pan Card No. Income Tax Return (.pdf)

RequiredUndertaking of visit the site and copy of performance curve chart (.pdf)

RequiredAuthorization regarding DSC and BOQ chart (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

Tender Fee Payable To

EE Barsar

EMD Fee Amount

₹9,000

Important Dates

Last Activity

25 Aug 2026

Published

25 Jun 2026

Bid Opening

6 Jul 2026

Download Starts

25 Jun 2026

Download Ends

6 Jul 2026

Submission Starts

25 Jun 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing/Installation horizontal spindle horizontal split casing/end suctions (backpull out arrangement) single/double multistages centrifugal pump or combination of energy saver pump in series/parrallel of recommanded make such as KSB/Kirloskar/ any approved make as per BIS 1520-1980 with upto date ammendments, read with 1S: 9137-1978 or latest edition suitable for lifting Raw water for under mentioned characterstics with bronze impellersupriming funnels, casing ring and shaft sleaves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate (base plate to be from the manufacturers of the pumping unit only) to Squarrel cage/ slippering drip proof induction motor of standard make such as Kirloskar/Crompton/ABB/NGEF//make and suitable for operation on 400 (+/-) 10% volts. 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be atleast 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The motor should be as per IS: 325-1978 with upto date ammendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:-	2	Per Set	100	₹200
2	Discharge (Q)10.38 LPS Total Dynamic Head= 102.26 Meters LWL. in sump well (h)= 368.50 Pump Shaft level= 368.50 Level at discharge point. = 464.10 Suction lift= (+ve) Meters Residual heat =0.00 Meters Static Head = 95.60Meters Rising main Length = 290 Meters Dia = 125 mm Pumping Hours= 8 Hours Altitude of Installation above MSL= 500 Meters Characteristics of water. (a) Temperature= 20°C (b) Abient Temp= 42°C (c) Turbidity Clear water < 50.00 NTU (d) Alkalanity Mg/Ca Co3 (e) Size of the solids = mm (f) Other	-	-	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.44 MB

Work Item Documents

form6.pdf

Tender Documents • 0.45 MB

form8.pdf

Tender Documents • 1.20 MB

BOQ_203597.xls

BOQ • 0.24 MB

termscondition.pdf

Additional Documents • 0.40 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

DHANANJAY SINGH SLATHIA

Accepted-Technical

M/S Anil Trading And Engineering Works

Accepted-Technical

LOWER BAZAR SARKAGHAT DISTT MANDI H P

SS ENGINEERING WORKS

Accepted-Technical

HAMIRPUR ROAD NEAR BUS STAND UNA DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301

Ssumit Sharma

Accepted-Technical

M/ Shiv Shakti Traders

Not Admitted-Fee/PreQual/Technical

LAXMI BAZAER TEHSIL JOGINDERNAGAR DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing/Installation horizontal spindle horizontal split casing/end suctions (backpull out arrangement) single/double multistages centrifugal pump or combination of energy saver pump in series/parrallel of recommanded make such as KSB/Kirloskar/ any approved make as per BIS 1520-1980 with upto date ammendments, read with 1S: 9137-1978 or latest edition suitable for lifting Raw water for under mentioned characterstics with bronze impellersupriming funnels, casing ring and shaft sleaves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate (base plate to be from the manufacturers of the pumping unit only) to Squarrel cage/ slippering drip proof induction motor of standard make such as Kirloskar/Crompton/ABB/NGEF//make and suitable for operation on 400 (+/-) 10% volts. 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be atleast 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The motor should be as per IS: 325-1978 with upto date ammendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:-

Per Set

100

₹200

Discharge (Q)10.38 LPS Total Dynamic Head= 102.26 Meters LWL. in sump well (h)= 368.50 Pump Shaft level= 368.50 Level at discharge point. = 464.10 Suction lift= (+ve) Meters Residual heat =0.00 Meters Static Head = 95.60Meters Rising main Length = 290 Meters Dia = 125 mm Pumping Hours= 8 Hours Altitude of Installation above MSL= 500 Meters Characteristics of water. (a) Temperature= 20°C (b) Abient Temp= 42°C (c) Turbidity Clear water < 50.00 NTU (d) Alkalanity Mg/Ca Co3 (e) Size of the solids = mm (f) Other