CA NO. GE AF NO.1/GUR-52/2023-24 REPAIRS TO ROOF, JOINERY, PLASTERING, FLOORING, DADO AND SANITARY WORKS IN CERTAIN UNITS AT AF STN PALAM UNDER GE (AF) GURGAON NO 1.

Amount

Taking down chowkhat or frames with shutters of any description (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat or frames with shutters of any description (without taking off shutters from the frame) exceeding 1.50 sqm and n.exc. 4 Sqm each complete all as specified and as directed.

Taking down shutters only of any description exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed.

S&F aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed all as specified. (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as per specified. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per specified. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as specified. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per specified. (g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent. (h) Six lever mortice lock brass on in each door. (j) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass/Plain glass(Colour) 5mm thick.

S&F for 12mm thick Seamless toughen glass panel (single panel) with fixing decorative Air Force/Unit logo on glass panel doors as required , including Stainless Steel Brackets,fastner, rubber gusket or packing material all around the panel for fixing with wall or framed work as required and making good surfaces complete all as specified and as directed by EIC. (Note :- Rate included for four storey building including scaffolding and all safety measures)

S&F aluminium coloured power coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per specified (b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per specified. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per specified. (e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per specified. (f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with "H" Section. Note : If ground requirement for sliding window/AC window contractor should provide as per direction of Engineer-in-Charge without any price adjustment.

S&F aluminium powder coated Ventilator with Top Hung shutters /fixed type with section of 16 guage including necessary jointing cleats, glazing clips, rubbers gasket, anodised aluminium snap beading, screw, powder coated aluminium anodised fittings complete all as specified and directed by Engineer-in-Charge.

S&F PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid prelaminated PVC foam sheet mite cut at two corners and jointing with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shal be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members,Make:-Rajshri,Sintex or Equivalent out of make specified in tender.

S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for top and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.

S & F in repair rubber beading to be fixed over glass panes in Aluminium windows complete all as directed.

S&F in repair, aluminum anodised glazing clip to the alumiinum window frames after fixing the glass panes complete all as specified and as directed.

Dismantling structural steel work incl. steel door, gate, window guard bars, grills etc. complete all as specified and as directed.

M&L for mild steel works as in grills and railing, rafter, purlin. of Fe-410-0or Fe 310-0, complete all as specified and as directed by Engr-in-charge

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as specified and as directed.

S&F 4.0mm thick sheet glass plain pane best quality fixing to Aluminium/Steel/wooden Sections as in Panel of Doors/Windows/Ventilator and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.

S&F 4.0mm thick Glass pane figured pin headed type, best quality, fixing to Aluminium/Steel Sections as in Panel of Doors/ Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.

S&F in repair Double Action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium Alloy sheet foundation Box, Main Body with stainless steel cover, outer ring pivot made of brass, other part made Mild steel heavy duty and fixing to Aluminium Shutters with necessary fittings as required/ ordered at site(s), complete all as specified and as directed. (Note :- Quoted rate should inclusive of taking down and refixing of old Aluminium door shutter with minor Repairs if any)

S&F in repair Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 30 to 50 kg and fixed (Al die cast body), complete all as specified and as directed by Engr-in-Charge.

S&F in repair 100 mm dia double legged door stopper of aluminium anodized with rubber head complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 75 mm butt hinges made up of extruded anodised aluminumfixed with flat head SS screw complete all as specified and as directed.

S&F inrepairs for 125mm long extruded anodised aluminum alloy handle fabricated type fixed with flatb head SS screw complete all as specified and as directed.

S&F in repairs for 150mm long anodised aluminum barrel tower bolt of extruded aluminium section fixed with flat head ss screw complete all as specified and as directed.

S&F in repairs for aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section and all as specified

Taking Down old unserviceable rolling Shutter/Steel Gate of area n exc 25 Sqm each of any description and refixing after over hauling including, necessary welding of iron flats, replacement of bottom strips, replacement of springs, replacement of Gear, replacement of ball bearing, replacement of MS Sheet Hood, making good surfaces, applying two coat Synthetic enamel paint over a coat of primer complete all as specified and directed by Engr in Charge.

Taking Down old unserviceable rolling Shutter/Steel Gate of area n exc 25 Sqm each of any description and refixing after over hauling including, necessary welding of iron flats, replacement of MS Sheet Hood rolled skelton for roling shutter and , making good surfaces, applying two coat Synthetic enamel paint over a coat of primer and unserviceable spare part shall be replaced and will be paid to contractor as 'supply only' items of Schedule.

Supplyonly in replacement of springs

Supply only in replacement of grear box with handle

Supply only in replacement of ball bearing

Supply only in replacement of MS shaft rod

Supply only in replacement of rusted strips of any length as per site requirement

Supply only in replacement of bottom strips with lacks

S&F safety lever locks mild steel with 4 lever for rolling shutters complete all as specified and as directed.

S&F ball bearing for rolling shutters complete all as specified and as directed.

M & L Preparing newly untreated steel surfaces of any descripton over 10 cm width or girth and applying two coat of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed.

Taking down old damaged cement plaster/grit wash Plaster including backing coat if any from wall of any description on brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building, including patch work,scaffolding and all safety measures)

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) (Note :- Rate included for four storey building, including patch work,scaffolding and all safety measures)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

Dismantling of existing roof tiles/roof treatment from roof and parapet of any description and removing the rubbish all as specified and as directed by Engr-in charge.

Cleaning top surfaces by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed by Engineer-in-Charge. Note :- 1. Plaster shall be measured and paid separately under appropriate item of Sch ‘A’. 2.Rate of this item is inclusive of disconnect fitment at water tank or solar heater etc and refixing in the same position after compeleting of roof treatment.

M&L for 15 mm thick cement plaster by using manufacture sand in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (work to be carried out upto 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for applying 3.00mm thick APP based polymer membrane by torch application for sealing joint over 85/25 industrial bituminous coat @ 1.20Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm on newly plastered clean and dry roof surface complete all as specified & directed by Engr-in-charge.

M&L PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in roof coving/benching and bed block, plateform for tank etc complete all as specified and directed by Engr-in-charge

Demolition of brick masonry work, built in cement mortar of any description including rubbish of the premises complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 including raking out joints complete all as specified and directed by Engr-in-charge

Dismantling Plain or corrugated steel/PVC sheeting any guage, thickness, including removing from site complete all as specified and as directed.

Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed vwith self tapping screws complete all as specified and as directed.

S&F for 6 mm thick Twin wall Thermoclear poly carbonate sheet of any colour as in roof covering/cladding to wall fixed with coach screws and washers over Aluminium cover Strip 40x3mm and rubber washer in each joint complete all as specified and directed .

Taking down existing water tank of capacity 500 to 1000 Ltr and refixing after necessary cleaning/water proofing treatment on roof surface including replacement of tank nipple etc complete all as specified and as directed.

S&F in repairs Ball brass valves 20 mm dia , high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20 mm Bore Gun metal globe/gate valves with iron lever fixed, screwed both ends complete all as specified and as directed by Engineer in charge.

S&F in repair 500 ltrs rotational moulded polyethylene water storage Three layer tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge .

S&F in repair 1000 ltrs rotational moulded polyethylene water storage Three layer tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge .

Cleaning of tanks and removing all scale and dirt, etc,with bleaching power, brush from mouths of circulating pipes etc capacity exc 250 and not exc 1000Ltr each including write date of cleaning and next due date also complete all as specified and as directed.

S&F PVC Tank covers suitable for 300 to 1000 ltrs capacity fixed with nuts, bolts and locking arrangement complete all as specified and as directed.

M&L for Removing of Small Trees along with Grass Roots from surroundings of water storage tanks by manually with the help of sharp tools and filled up small holes with PCC (1:2:4) Type B0 (12.50mm Graded Stone Aggregate) finished surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Cleaning of Roof Top up to four storey building including pitched roof and Gutter etc by Removing vegetation growth, Grass Roots manually with the help of sharp tools and filled up small holes with PCC (1:2:4) Type B0 (12.50mm Graded Stone Aggregate) finished surface even and smooth without using extra cement and make roof top surface water proof complete all as specified and as directed by Engineer-in-Charge.

Demolition of wall and ceiling boards (Fibre, pulp, insulation etc.) or insulation board / slabs any description , any thickness including cover fillets complete all as specified and as directed.

Providing & fixing false ceiling With fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles at all heights with GRG ( Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture,design and patters having moisture content lessthan 2%. Humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS 476 (part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 3000mm,cross-T of size 15x32 of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvenizing @ 80 grams per sqm)i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm lenght and L shape level adjuster of size 85x25x2mm Galvenised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement & fixing at site on PVC frame complete all as specified and as directed.

S&F in repairs for 3mm thick Alluminium Composite Panel with combination of aluminium skin material of 0.25mm Thick (coloured sheet as directed ) alluminium sheet of alloy grade 1100 H cover material,coated on external side with PVDF coating containing 70% resins for anti-fungal & anti bacterial properties and the center core shall be with natural polythelene (LDPE and HDPE) bonded to the alluminium skin on both side. Cladding panal to be fixed with Rawl plug and SS screw all as approved on walls and roof including necessary accessories, complete all as per manufacturer's intructions and as directed by Engr-in-charge Make : lennox/reyno bond/Alpolic/Allex or equivalent out of make specified in tender.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 25mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 600X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, UPVC 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed by Engr-in-Charge.

M&L for Vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including Taking out unservice able WC Pan and connected Items, complete all as specified and as directed.

S&F in repairs water closet vitreous china pedestal pattern with flushing cistern, seat cover and internal accessories (including ‘P’/'S' trap) white colour and fixed as per manufacturers instructions and complete all as specified and as directed by the Engineer in Charge.

Dismantling of floor, hearth, or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Ceramic coloured/ printed non-skid tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles including patch work etc complete all as specified and as directed.

S & F vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor fineshes including patch work etc complete all as specified and as directed.

M&L Glazed Ceramic Coloured Tiles, 300X450X7mm to 10mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in white or coloured Cement to match the shade of the Tiles, including patch work etc complete all as specified and as directed.

Dismaintling of Stone slabs and tiles of any description or thickness in floor or wall, aprons and laid badded and pointed in any mortar etc complete all as specified and as directed.

M&L for 18 to 20mm thick granite (of any type) work (table rubbed and polished, rounded and chamfered ) in steps, jambs, pillars, window- cills, cooking platforms in full length upto 2.50 mtr and laid over and including 10 to 155mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & making hole for gas pipe where required including patch work etc complete all as specified and as directed.

M&L for 20-22 mm thick machine cut Kota stone slab of size 550mm x 550mm in flooringand skirting over cement screed bed 18-20mm thick in CM 1:4 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror polishing in repairs, including patch work etc complete all as directed by Engr-in-Charge.

M&L for 60mm thick Machine pressed precast concrete Glazed inter locking paver block M-35 Gde any shape and size with white cement and pigment conforming to IS 15658-2006 over sand cushioning, including patch work etc as specified and as directed.

Fixing only old interlocking paver block obtained from dismantling and laid over 25mm thick sand cushioning all as specified and as directed.

M&L in repair for Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed Glazed colour, Set and Jointed in Neat Cement Slurry with white Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:4) as in Path, complete all as specified and as directed. Make - Coral,Estilo( RT 30020 Tulip), SP Tile or equivalent out of make specified in list of makes.

S&F in repair, 6mm thick Glass shelf (22x6") with Brass CP Bracket with brass nut, complete all as specified and directed by Engr in charge. Cat part No- ES01A of make-Nixo/hilife or equivalent out of makes specified in list of makes.

S&F in repair, 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge. Cat No-ES03A of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.

M&L for 15mm thick rendering in patches in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for 15mm thick rendering in patches in CM 1:6 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new and old plastered surface, including necessary scaffolding upto 4th floor complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls including cornices plasters and applying two coat of oil bound distemper over a coat of primer and 1 to 2 mm thick cement based wall putty complete all as specified and directed.

M&L for preparing new plastered surfaces of walls including cornices plasters and applying two coat of cement base paint in patches complete all as specified.

M&L for extra over rendering/plastering for raking as in strings to stairs, railing,chajjas, edges and similar work in cement mortar 1:1 in any thickness including applying two coats of exterior Acrylic emulsion paint (100% acrylic) of existing colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface, including necessary scaffolding upto 4th floor complete all as specified and as directed .

Removing of old debris obtained from excavation/demolition building material to a distance exc 10 Km but n exc 15 Km and deposited out side the MD land. Note :- Searching of Place of Disposal out side the MD Land will be the responsibility of Contractor and rate of any distance shall be deemed to be included in quoted unit rate.

Note :- The amount of Rs 77210/- against Schedule of Credit on Srl Page 144 shall be deducted from the total amount quoted against Sch 'A'

M/S Parshant Associates

H.B. Traders