RequiredExperience with Government Mobile Toilet ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use
RequiredKnocked Down To Be Assembled At Consignee Site By The Seller
RequiredKnocked Down To Be Assembled At Consignee Site By Consignee Himself Number of Compartments 10-seater mobile toilet 4-seater mobile toilet
Required6-seater mobile toilet
Required8-seater mobile toilet
Required1/11 10-seater mobile toilet Type of WC Indian with ceramic base Indian with ceramic base
RequiredIndian with steel base
RequiredIndian with FRP
RequiredIndian(FRP) with integrated facility(With floor)
RequiredEuropean with ceramic base
RequiredEuropean with steel base Number of WC 10 * Number of Bathrooms 0 * Number of Urinals 0 * Water facility By mean of overhead tank(Capacity 1200Ltrs) By mean of overhead tank(Capacity 200Ltrs)
RequiredBy mean of overhead tank(Capacity 300Ltrs)
RequiredBy mean of overhead tank(Capacity 500Ltrs)
RequiredBy mean of overhead tank(Capacity 1000Ltrs)
RequiredBy mean of overhead tank(Capacity 1200Ltrs)
RequiredDirect connection from external supply Wash basin 2 Nos. outside the Unit with common facility 1 No. in each WC unit(inside)
Required1 No. in each WC and Urinal unit
Required2 Nos. outside the Unit with common facility
Required4 Nos. outside the Unit with common facility Sewage facility Sludge tank (capacity-1200ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater) Sludge tank (capacity-400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 4-seater)
RequiredSludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater)
RequiredSludge tank (capacity-1400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 8-seater)
RequiredSludge tank (capacity-1200ltrs) with 100mm outlet facility 2/11 through butterfly valve and hose pipe(For 10-seater)
RequiredSludge tank (capacity-2000ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater)
RequiredProvision for directly connected to septic tank/sewage ventilation Full size cross ventilation One No.
RequiredTwo No.
RequiredFull size cross ventilation Top(roof) shape Slanting/tapper * Projection of Roof NO projection 50mm projection on all the four sides(slanting shape)
Required100mm projection from front and 50mm projection on other sides(slanting shape)
Required50mm projection from front and 25mm projection on other sides(slanting shape)
RequiredNO projection Installation and commissioning To be done by seller To be done by seller
RequiredTo be done by Consignee himself Plumbing and Sanitation fitting connections To be done by seller To be done by seller
RequiredTo be done by Consignee himself Electrical connections To be done by seller To be done by seller
RequiredTo be done by Consignee himself Waste extraction fitting To be done by seller To be done by seller
RequiredTo be done by Consignee himself Civil foundation No foundation required No foundation required
RequiredRequired - To be done by seller
RequiredRequired - To be done by consignee himself TRAILER STRUCTURAL MATERIAL Trailer frame(Chassis) material with support material including pathway 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 3/11 10-seater 10-seater
Required75/70 X 40/35 mm channel section - 35 X 35 X 5 mm angle iron - 50 X 25 x 1.6 mm MS pipe and cross support of 20 X 20 X 1.6 mm MS pipe Railing material 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater)
Required38mm X 25mm SS pipe of thickness 0.6-0.8mm (for 4-seater
Required6-seater
Required8-seater & 10-seater)
Required20mm round pipe fixed on sliding platform Trailer understructure Spring leaves 914mm with 13 leaves for 8-seater and 10-seater Spring leaves 710mm with 9 leaves for 4-seater and 6-seater
RequiredSpring leaves 914mm with 13 leaves for 8-seater and 10-seater Turn table/rotor 100mm X 50mm MS channel and 10mm thick MS plate plus spring ply 40mm X 5mm * Pathway passage/slide platform Aluminum chequerd sheet having width of 455mm * Stairs frame material 35mm x 35mm X 5mm MS angle and 25mm x 25mm x 3mm MS angle with 25mm x 3mm MS Flat * Stairs size 710mm X 230mm having 4-step for 1420mm Height and 735mm width stair * Locking Locking pins to be provided for lock the platform * Tow bar Made of 100 X 50 mm channel section with easy detachable and connect with turn table Made of 100 X 50 mm channel section with easy detachable and connect with turn table
RequiredWithout Tow Bar FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 4/11 6-seater/8-seater & 10-seater) 6-seater/8-seater & 10-seater)
RequiredNo side frame structure Top(roof) frame material 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle
RequiredNO top(roof) frame structure Top(roof) support frame structure 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat
RequiredNO top(roof) support frame Partition frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle
RequiredNO partition frame material Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS * Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe 50mm X 25mm of 14-16gauge rectangular MS hollow pipe
Required50mm X 25mm of 14-16gauge rectangular SS hollow pipe
RequiredNo door frame material Support material for Door panel fixing Aluminium U-channel of 18gauge Aluminium U-channel of 18gauge
RequiredSS U- channel of 18gauge
RequiredNo support material Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS * Tank holder frame material 25mm X 3mm (thick) MS flat 25mm X 3mm (thick) MS flat
Required1125mm X 820mm outer ring(tubular structure)-MS PANEL MATERIAL Side panel material 18 gauge MS sheet 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
Required18 gauge MS sheet
RequiredFitted with plastic light weight LLDPE roto moulded
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm 5/11 thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
Required18 gauge aluminum sheet
Requiredcorrugated steel sheet Top(Roof) panel material 4mm polycarbonate sheet with U channel for water drain 2mm thick FRP translucent sheet
Required5mm thick ply core sandwich with 1mm thick FRP from both side(5+1+1 mm)
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
Required4mm poly carbonate sheet fitted on top
RequiredFitted with plastic light weight LLDPE roto moulded
Required4mm polycarbonate sheet with U channel for water drain Door panel material Outside paneling of 18 gauge aluminum sheet(corrugated sheet) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners (steel sheet thickness 0.6mm 275MPA)
RequiredOutside paneling of 18 gauge aluminum sheet(corrugated sheet)
RequiredFitted with plastic light weight LLDPE roto moulded partition panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm 6/11 thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
RequiredFitted with plastic light weight LLDPE roto moulded Floor material Anti skid tile finish floor inside toilet 5mm thick FRP material
Required1.5-2.0mm thick SS 304 material
RequiredFitted with plastic light weight LLDPE roto moulded
RequiredAnti skid tile finish floor inside toilet DIMENSION Size of each cubical(LXWXH) ± 25mm 890mm X 840mm X 1980mm 890mm X 840mm X 1980mm
Required915mm X 915mm x 1980mm
Required1220mm X 915mm X 1980mm
Required915mm X 435mm X 1955mm
Required1220mm X 1220mm X 1980mm
Required1000mm X 915mm X 2000mm
Required1143mm x 890mm x 1980mm
Required1778mm x 1143mm x 1980mm
Required3658mm x 2438mm x 1980mm
Required4877mm x 2438mm x 1980mm Door size(WxH) ± 20mm 610mm X 1750mm * Ventilation size(WXH) ± 10mm 838mm X 150mm(above door) plus 838mm X 75mm(opposite side) * Partition height ± 20mm 1830mm * Single pan size ± 10mm As per buyer's choice * Overall Length(mm) ± 25mm 5590mm for 10-seater * Overall Width including pathway(mm) ± 25mm 3200mm (with path way) for 10(in two rows) seater and 2100mm without pathway 2700mm for 4/6/8 and 10-seater
Required2438mm for 4 and 6 seater
Required3200mm (with path way) for 10(in two rows) seater and 2100mm without pathway Total height ± 25mm 3200mm * SEWAGE SUCTION UNIT Capacity of sewage suction unit 5000Ltr * 7/11 Length of sewage suction unit ± 25mm 3355mm for 6000Ltr * Width of sewage suction unit ± 15mm 1830mm for 4000Ltr
Required5000Ltr and 6000Ltr * Capsule Diameter 1525mm * Capsule Thickness 5mm round and 6mm Front and Back * Chassis size of sewage suction unit 205mm x 75mm * Suction pump 7.5 HP * Valve for sewage suction unit Butterfly valve of 100mm * Axle for sewage suction unit 89mm x 1675mm for 4000ltr capacity * Tyres for sewage suction unit Two nos. of size 9.00 x 20ply for 4000ltrs. * Spring leaves for sewage suction unit Two nos. of size 914mm with 13 leaves in each for 4000ltrs. * MISC Door locking bolts Size 100mm of MS * Tower bolt locking Tower bolt of MS size 75mm * Overhead Tank material made of double layer HDPE sheet * Wash basin material made of FRP(fiber reinforced plastic) * WC material Indian style WC seat made of FRP with footrest in simple mould of 2.5mm thick(tray type) * Towel rail/ring made of plastic * Cloth hook made of aluminium * P-trap material made of HDPE(75mm) * Footrest(WC) material N.A made of FRP integrated with Indian WC and floor
Requiredmade of SS 304 integrated with Indian WC and floor
Requiredmade of Ceramic integrated with Indian WC and floor
RequiredN.A Sewage tank material Sludge tank made of FRP 4mm(for 4-seater/6 -seater/8-seater & 10-seater) * 8/11 Mirror size 455mm X 305mm 455mm X 305mm
Required380mm X 255mm
RequiredNO mirror Electric provision By mean solar energy * Sewage provision Connected to bio- digester * Level indicator provision To be provided in every sewer/sludge tank to know the level of sludge and plan to get it evacuated * Water supply connection UPVC pipe connection with all toilet interconnecting * Seat cistern fitting Ceramic cistern to toilet seat By PVC flush pipe to toilet seat
RequiredCeramic cistern to toilet seat
RequiredNO cistern Soap stand Plastic made Size:125 X 75 mm * Tap material Chrome plated * Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) * Trailer Movement facility Two axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater Two axle of 50mm X 50mm X 1828mm with 4-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater
RequiredTwo axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater
RequiredOne axle of 50mm X 50mm X 1828mm with 2-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater
RequiredOne axle of 89mm X 89mm X 1676mm with 2-tyres of size 9.00 X 20 with hubs and bearings for sludge unit
RequiredOne axle of 89mm X 89mm X 1778mm with 2-tyres of size 9.00 X 20 with hubs and bearings for sludge unit
Requiredtwo axle onf 75 X 75 mm with 9/11 hub of 8 bolt with bearing size 32213 with 4-tyres of size 7.5 X 16 Provision for vent pipe From sludge/Septic tank * Water mug(standard size) Plastic made * Electric point 1 No. electric point to be provided in all toilet 2 watt LED * Stand provision to keep mobile toilet in static position To keep safe Tyre
RequiredTube
Requiredrim and their maintenance * COLOUR & FINISH Colour of cabin As per buyer's choice * Finish With Primer and Paint * CERTIFICATION Test reports to be furnished to buyer's on demand YES * OEM of offered product is ISO 9001:2015 certified YES * WARRANTY Warranty period in number of years 1 1
Required2
Required3 * Bold specifications are the golden parameters.
