Loading…
Loading…
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
11 Jun 2026, 6:00 pm5d left
CWE (NW) Mumbai
CWE (NW) Mumbai
REPAIR/MAINTENANCE OF LT DISTRIBUTION PANELS, LT CABLES, CABLE TRAY AND ALIIED WORK AT INS KUNJALI , INS TRATRA WORLI, RAFIYA MANZIL, PCDA(N), INWTC, OYSTER ROCK AND MIDDLE GROUND, CE(N) BV YARD Etc. INSTALLATIONS AT VARIOUS LOCATIONS UNDER GE(NW)
2026_MES_765734_1
8530/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
330 days
GE (NW) Kunjali
Class C
Category b (i)
7 documents required · 7 mandatory
₹1,000
GE (NW) Kunjali
₹1.4 L
Yes
16 May 2026
16 May 2026
13 Jun 2026
16 May 2026
11 Jun 2026
6 Jun 2026
16 May 2026 - 10 Jun 2026
All as per item No. 1 above but for cable size 16 sqmm 4 core
All as per item No. 1 above but for cable size 25 sqmm 3.5 core
All as per item No. 1 above but for cable size 35 sqmm 3.5 core
All as per item No. 1 above but for cable size 50 sqmm 3.5 core
All as per item No. 1 above but for cable size 70 sqmm 3.5 core
All as per item No. 1 above but for cable size 95 sqmm 3.5 core
All as per item No. 1 above but for cable size 120 sqmm 3.5 core
All as per item No. 1 above but for cable size 150 sqmm 3.5 core
All as per item No. 1 above but for cable size 185 sqmm 3.5 core
All as per item No. 1 above but for cable size 240 sqmm 3.5 core
All as per item No. 1 above but for cable size 300 sqmm 3.5 core
Supply, installing, testing and commissioning in replacment of factory made and tested (incl CPRI type test certified), Indoor LT feeder pillar box of appropriate dimensions (as per Indian Electricity rules) to accommodate following components, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars 1500 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front & rear opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm lock with 2 keys), internal wiring with PVC insulated, multistranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 4 sqmm. The scope of work includes the following:- Components Incoming :(a) ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual drawout type) of capacity 1000 Amps -01 No Outgoing :- (a) MCCB 4 pole 200 Amp ('C' Curve), rupturing capacity- 36 kA confirming thermal magnetic release and adjustable over load setting 415 V AC , 50 Hz complete - 01 Nos b) MCCB 4 pole 160 Amp ('C' Curve), rupturing capacity- 36 kA - 04 Nos (03 for load and 01 spare) c) MCCB 4 pole 125 Amp ('C' Curve), rupturing capacity- 36 kA confirming thermal magnetic release and adjustable over load setting 415 V AC , 50 Hz complete - 06 Nos ( 5 for load and 1 spare) (d) MCCB 4 pole 100 Amp ('C' Curve), rupturing capacity- 25 kA confirming thermal magnetic release and adjustable over load setting 415 V AC , 50 Hz complete - 03 Nos (c) MCB 10 KA, 63 amp ('C' Curve), 2 pole- 2 No Voltmeter - 01 No (c) Ameter- 01 No Make of All componetnts :As approved (Note :Necessary approval of drawings of LT feeder pillars to be taken from GE before placing order by the contractor)
All as per item No 15 above but of size 450x50 mm
All as per item No 15 above but of size 250x50 mm
All as per item No 15 above but of size 150x50 mm
All as per item No. 21 above but for cable size 50 sqmm 3.5 core
All as per item No. 21 above but for cable size 95 sqmm 3.5 core
S & F in replacement LED garden light 9 W (Min 120 lumen/Watt)cylindrical shaped integral decorative LED bollard with opal acrylic diffuser and IP 65 with all accessories includingn PCC foundation tapper plug, bolts, nuts, screws etc complete all as specified and directed by Engr-in-charge. complete all as specified and directed.
S&F in replacement of LED street light 120 W (Min 120 lumen/Watt)energy saving and envirment friendly light fitting with housed in pressure dia cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories Make : As approved complete all as specified and directed by Engr-in-Charge.
S&F in replacement of LED street light 90 W (Min 120 lumen/Watt) energy saving and envirment friendly light fitting with housed in pressure dia cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of LED flood lights 250 W (Min 120 lumen/Watt)energy saving and enviromental friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories.
Supply and fix in replacement of LED flood lights 150 W (Min 120 lumen/Watt) energy saving and enviromental friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories.
S&F in replacement of LED highbay light 250 W (Min 120 lumen/Watt) energy saving and envirment friendly light fitting, pressure dia cast aluminium housing with aim & adjustable bracket, matt finished reflector for gglare elimination, SMD LED with secondary lens with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge.
S& F in repair on load change over switch 400 Amps capacity, 415 Volts, 50 Hz, 4 Pole with advance neutral complete with sheet metal enclosure complete all as specified and directed
S & F in repairs Air Circuit Breaker of capacity 1600A, Ics=100% Ic, 50kA complete all as specified and directed.
S& F in replacement of outdoor type LED column/LED Tiranga light column of 4 meter height with cylindrical aluminium pipe housing, opaque diffuser made from engineering grade polymer, 50W, IP-65 complete all as specified and directed.
Excavation in trenches n exc1.5m wide and n exc in depth for laying of cables and getting out in loose/soft soil complete all as directed.
Returing filling in including spreading, levelling watering and well ramming in layers not exc 25cm complete all as directed.
Removing excavated material n exc 50cm and deposting where directed at a level n exc 1.5m above the starting point complete all as directed.
M& L for for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm (Punned thickness) after laying cable complete all as specified and directed.
M&L for un-reinforced,precast concret cable cover of size 250x150x40 mm class LV type-I for cable protection complete all as specified and directed Make : As approved
S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 8 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed by EIC.
S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 9 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed by EIC.
Supply and fixing in replacement of LED façade wall grazer 36W made up of aluminium cast housing, IP-65 with options 2700k to 6500k to RGB with option of remote operations complete all as specified and directed.
S&F in repair of 50 Sqmm single core copper cable or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed . Make As approved
Supply and fixing in replacement of decorative LED post Top lights 60W, cast aluminium housing, suitable for fixing outer dia 55mm size complete all as specified and directed.
Supply and fix in repair PVC/Polycarbonate made junction box of existing size (not less than 250x250x160 mm) having two incoming and one outgoing cable ways alongwith fixing arrangement complete including 01 Nos 6 Amp MCB SP for security light all as specified and directed.
Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed
S&F in repair GI tubing light grade 80mm bore ISI Marked with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed. Make : Jindal/Tata/Surya Prakash or Techno commercial equivalant as approved.
S&F in repair GI tubing light grade 100 mm bore ISI Marked dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed.
Cutting road/hard standing for laying of cable and re mataling/making good the same to match the existing surface complete all as directed by Engr incharge.
S&F in repair of double door type vertical type TPN DB 4 Way ,240V with 100A copper busbar , double door type IK 09 protection suitable for housing MCCB's all as specified and directed by EIC.Make: Legrand cat No 507781/Seimens/C&S. or Techno commercial equivalant as approved. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.
S&F in repair of double door type vertical type VTPN DB 6 Way ,240V with 100A copper busbar , double door type IK 09 protection suitable for housing MCCB's all as specified and directed .Make: Legrand cat No 507781/Seimens/C&S.or Techno commercial equivalant as approved. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.
S&F in repair of double door type vertical type VTPN DB 8 Way ,240V with 200A busbar , with metalic double door type IP 43 IK 09 protection suitable for housing MCCB's all as specified and directed by EIC.Make: Legrand cat No 507783/Seimens/C&S.or Techno commercial equivalant as approved. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.
S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A all as specified and directed .
S & F MCB SP 6-32 Amps,10KA. 230volts all as specified and directed.
S & F MCB SPN 63 Amps,10KA, 230Volt all as specified and directed.
S & F MCB TPN 63 Amps,10KA, 230Volt all as specified and directed.
S&F in replacement of unserviceable MCCB 63 Amps, 25 KA capacity 3 Pole with adjustable thermal magnetic release.
S&F in replacement of unserviceable MCCB 100 Amps 25 KA capacity 3 Pole with adjustable thermal magnetic release.
S&F in replacement of unserviceable MCCB 125 Amps 25 KA capacity 3 Pole with adjustable thermal magnetic release
S&F in replacement of unserviceable MCCB 200 Amps 36 KA capacity 4 Pole with adjustable thermal magnetic release.
S&F in replacement of unserviceable MCCB 250 Amps 36 KA capacity 4 Pole with adjustable thermal magnetic release.
S&F in replacement of unserviceable MCCB 400 Amps 36 KA capacity 4 Pole with adjustable thermal magnetic release.
Supply and fix in repair of STRAIGHT THROUGH JOINT complete with jointing material (Heat srinkable) for 1100V grade cable for XLPE armoured alluminium conductor cable of size 240 sqmm 3.5 cre complete all as specified and directed.
All as per item No 62 above but for cable size 185 sqmm 3.5 core
All as per item No 62 above but for cable size 120 to 150 sqmm 3.5 core
All as per item No 62 above but for cable size 95 sqmm 3.5 core
All as per item No 62 above but for cable size 70 sqmm 3.5 core
All as per item No 62 above but for cable size 50 sqmm 3.5 core
All as per item No 62 above but for cable size 25 to 35 sqmm 3.5 core
All as per item No 62 above but for cable size 16 to 10 sqmm 3.5 core
Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set (Earthing) comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.
M&L in replacement for 25x4mm GI earth continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to transformer/panel body complete all as specified
M & L for fixing standard shock treatment chart in English & Hindi duly framed and covered with glass complete all as specified and directed.
M&L for Scraping of old paint from steel tubular poles 9.0 mtr length above ground level including street light arm applying one coat of red oxide primer and two coats of synthetic enamelled paint of superior quality by aluminium paint and marking pole number by black paint all as directed by Engr-in-charge.
Taking out ACB breaker for repair and servicing by disconnecting and dismantling the ACB breaker any rating Amps any make by carrying out repair/ servicing , checking and renewing the defective shunt trip coil & UV trip 415 V AC , checking and rectifying the defective CTs and rectifying the mechanism operation including spring charge system, reinstalling the same in the panel and providing necessary line and complete all as specified and directed .
Supply and fix insulation mat as per IS 15652:2006, having not less than 30kV dielectric strength and having insulation resistance of not less than 1M Ohm, acid retardent, flame retardent, having width of 1.0mtr and length upto 5.0 mtr with thicness 2.50 mm complete all as specified and directed.
Supply and fix insulation mat as per IS 15652:2006, having not less than 30kV dielectric strength and having insulation resistance of not less than 1MOhm, acid retardent, flame retardent, having width of 1.0 mtr and length upto 3.0 mtr with thickness 2.00 mm complete all as specified and directed .
Please Enable Macros to View BoQ information
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
NIT.pdf
Tender Documents • 0.39 MB
04 PS electrical lt led lt panel.pdf
Tender Documents • 0.37 MB
05 Appndx A f.pdf
Tender Documents • 0.39 MB
06 CESC MAKES BR-EM f.pdf
Tender Documents • 0.52 MB
07 PS APPX C to G Revised.pdf
Tender Documents • 0.80 MB
Genpages.pdf
Tender Documents • 0.89 MB
BOQ_857597.xls
BOQ • 6.26 MB
Download all tender documents and submit your bid