Science Academy in Panikoili Area, Jajpur

ABSTRACT OF COST

SL.NO. DESCRIPTION OF WORK

A BUILDING CIVIL WORK 342177469.37

B PLUMBING WORK

i INTERNAL PLUMBING 13363910.14

ii EXTERNAL PLUMBING 9224996.70

C FIRE FIGHTING WORKS 4896636.64

D ELECTRICAL WORKS

i INTERNAL AND EXTERNAL ELECTRICAL WORKS 58242882.54

ii LV SYSTEM 25031645.18

iii LIFT WORK 4018159.04

iv SOLAR SYSTEM 2938936.00

E HVAC WORK 58668042.73

OTHER SPECIALIZED SERVICES

F LANDSCAPE WORK

i CIVIL & FINISHES WORKS 7642236.83

GAURAV Digitally signed by GAURAV

NBCC 1 OF 223 ARCH-EN-DESIGN

RAVINDRA GAIKWAD

RAVINDRA Date: 2022.01.12 17:32:14

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

ii HORTICULTURE AND PLANT MATERIAL 2746770.84

iii IRRIGATION WORK 4877698.34

iv MISCELLANEOUS WORK 1008000.00

v LIGHTING WORK 4312672.00

G SIGNAGES WORK 9237573.12

H FURNITURE WORK 6704476.80

I 5D THEATER EQUIPMENTS 71876990.08

J ACOUSTIC WORK FOR PLANETERIUM AND 5D 7544946.86

K MULTIPLEX CHAIR 1256640.00

L PLANETERIUM EQUIPMENTS 30669140.32

SCIENCE CENTRE BACKGROUND MUSIC AND CONFERENCE

N EXHIBITION GALLERIES COST 193920840.65

O VR EQUIPMENTS 50172640.00

P FACADE LIGHTING COST 32698355.20

SAY ( in Cr.) 94.65

NBCC 2 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

Name of Project : DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

TENDER BILL OF QUANTITIES

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Earth work in ordinary soil with initial lead and lift including rough dressing in layers

1 SOR not exceeding 0.3m in depth and the Earth transported by transport vehicles as

directed by the Engineer-in-charge.

All kinds of soil Cum 4995.06 153.82 768344.18

Filling in foundation and plinth with excavated materials including watering and

ramming as directed by the Engineer-in-charge of earth work.

ANTI-TERMITE TREATMENT

Providing Pre-constructional anti- termite treatment and creating a chemical barrier

to the building by injecting chemical emulsion of required concentrations under grade

slab and Grade beam, all around the footings, column pits, trenches, pits, tunnels,

wall trenches, back fill, plinth filling, junction of wall and floor, Retaining / side walls

of basement floor, external perimeter of building, surrounding of pipes, expansion

joints, below UG sump and Retaining / side walls etc.as per instructions of chemical

manufacturer and all as directed. The treatment shall be carried out strictly in

3 MR accordance with the technical specification and conforming to IS 6313 or equivalent

BS specification. The chemical to be used as insecticides for the treatment shall be

50% EC (Imdachloropid 30.5 SC)and the application shall be dilute one part of

chemical 50% EC with 49 parts of water to get 1% emulsion and strictly in

accordance with the manufacturer's specification, as specified by consultants

appointed by the contractor. Manufacturer should ensure the performance guarantee

of the work for a period of 10 years by submitting a BG for 5(Five)% value of total

anti-termite treatment work, for a period of 05 years and Corporate Guarantee for

further 05 (Five) Years.

The bottom surface of the excavations made for Foundation, column pits and

a) trenches shall be treated with the chemical emulsion mentioned above at @ 5 litres/ Sqm 6848.45 207.20 1418998.84

sq. meter of surface area.

The Vertical surface of sub structure (Retaining wall,foundations etc.) shall be

treated @ 7.5 litres/ sq. meter of vertical surface area in contract with back fill soil.

NBCC 3 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

4 SOR Supplying and stacking at site.

Good earth Cum 81.48 384.94 31364.33

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded

stone aggregate 40 mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry

6 SOR brick ballast 40 mm nominal size, well rammed and consolidated and grouted with Sqm 684.85 444.98 304739.59

fine sand, including necessary excavation, levelling & dressing & finishing the top

REINFORCED CEMENT CONCRETE WORK

7 SOR Centering and shuttering including strutting, propping etc. and removal of form for :

RCC foundation, plinth band and footing bases of columns mass concrete pre-cast

slab etc. Up to Ground floor

b RCC beams, columns, grider and bressmer etc. Up to ground floor. Sqm 3638.77 801.81 2917593.61

c RCC beams, columns, grider and bressmer etc. Up to ground floor. Sqm 1321.32 801.81 1059444.95

Supplying fitting and placing uncoated HYSD bar reinforcement complete as per

drawing and technical specification. Up to Ground floor roof

a Up to Ground Floor Kg 322052.70 87.60 28212434.79

RCC work of M-25 grade with 20mm & down grade black hard granite (crusher

broken) stone chips including hoisting & laying.Up to ground floor roof

a Up to Ground Floor Cum 3440.62 5757.36 19808914.25

Extra for providing richer mixes at all floor levels.

10 SOR Note:- Excess/less cement over the specified cement content used is payable

/recoverable separately.

Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement

content considered in M-30 is @ 340 kg/cum)

NBCC 4 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not

11 SOR less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Cum 126.84 5090.06 645623.72

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick

AAC blocks in super structure above plinth level up to floor V level in cement mortar

1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2

Nos 6 mm dia M.S. bars at every third course of masonry work.

a Ground Floor Cum 16.37 6073.54 99423.78

b First Floor Cum 6241.42

c Second Floor Cum 6434.40

Providing and laying autoclaved aerated cement blocks masonry with

150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to

13 SOR floor V level with RCC band at sill level and lintel level with approved block laying

polymer modified adhesive mortar all complete as per direction of Engineer-in-

Charge. (The payment of RCC band and reinforcement shall be made for seperately).

a Ground Floor Cum 1472.60 5336.58 7858641.82

c Second Floor Cum 23.20 5790.51 134339.88

MARBLE & GRANITE WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade, colour and texture laid over

20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

14 SOR white cement, mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc. complete at all

Granite of any colour and shade

Area of slab over 0.50 sqm

a Ground Floor Sqm 54.88 3173.74 174175.07

b First Floor Sqm 43.74 3429.33 149998.81

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,

including machine polishing to edge to give high gloss finish etc. complete as per

design approved by Engineer-in-Charge.

NBCC 5 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

a Ground Floor Metre 91.44 318.75 29146.68

b First Floor Metre 72.88 366.58 26716.06

Extra for fixing marble /granite stone, over and above corresponding basic item, in

16 SOR facia and drops of width upto 150 mm with epoxy resin based adhesive, including

cleaning etc. complete.

a Ground Floor Metre 91.44 279.22 25531.51

b First Floor Metre 72.88 319.09 23255.13

Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and

polishing of cut edges etc. complete.

a Ground Floor Each 59.00 437.14 25791.02

b First Floor Each 55.00 502.77 27652.24

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for

wall lining (veneer work) including dado, skirting, risers of steps etc., in required

design and pattern wherever required, stones of different finished surface texture, on

18 SOR 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed

with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry

admixed with pigment of matching shade, including rubbing, curing, polishing etc. all

complete as per Architectural drawings, and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark

Emperadore etc.

a Ground Floor Sqm 23.56 6852.38 161442.17

b First Floor Sqm 23.56 8034.43 189291.22

c Second Floor Sqm 23.56 9393.78 221317.36

WOOD AND P.V.C. WORK

NBCC 6 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid door/window/Ceosetory window s & other Frames/Chowkhat comprising of

virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non tox ic additives

(maximum toxicity index of 12 for 100 gms) fabricated with miter jo ints after

applying PVC solvent cement and screwed with full body threaded star headed SS

screws having minimum f rame density of 750 kg/cum, screw withdrawal strength of

2200 N (Face) & 1100 N (Edge) , minimum compressive strength of 58 N/mm2,

modulus of elast icity 900 N/mm2 and resistance to spread of flame of Class A

category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixed in position with M.S hold fast/lugs/SS dash fa steners of required

dia and length complete as per direction of Engineer-In - Charge . (M.S hold

fast/lugs or SS dash fasteners shall be paid for separate ly).

Note: For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e.

depth and width of profile shall be acceptable . Variation in profile dimensions on

plus side shall be acceptab le but no extra payment on this account shall be made

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing wooden moulded beading to door and window frames with iron

screws, plugs and priming coat on unexposed surface etc. complete :

2nd class teak wood

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

gloss / matt/ suede finish with high density protective surface layer and reverse side

of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

NBCC 7 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing factory made uPVC white colour fixed glazed

windows/ventilators comprising of uPVC multi-chambered frame and mullion (where

ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized

mild steel section made from roll forming process of required length (shape & size

according to uPVC profile), uPVC extruded glazing beads of appropriate dimension,

EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic

packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall

be mitred cut and fusion welded at all corners, mullion (if required) shall be also

24 SOR fusion welded including drilling of holes for fixing hardware's and drainage of water

etc. After fixing frame the gap between frame and adjacent finished wall shall be

filled with weather proof silicon sealant over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of Engineer-in-

Charge. (Single / double glass panes and silicon sealant shall be paid separately).

Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in

dimension i.e. in depth & width of profile shall be acceptable. Variation in profile

dimension in higher side shall be accepted but no extra payment on this account

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68

mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of Sqm 13.50 6236.94 84198.74

appropriate dimension. (Area upto 0.75 sqm.)

NBCC 8 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing factory made uPVC white colour casement/casement cum fixed

glazed windows comprising of uPVC multi-chambered frame, sash and mullion

(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick

galvanized mild steel section made from roll forming process of required length

(shape & size according to uPVC profile), uPVC extruded glazing beads of

appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges,

zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size

for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless

steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all

corners, mullion (if required) shall be also fusion welded including drilling of holes for

fixing hardware's and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon sealant

over backer rod of required size and of approved quality, all complete as per

approved drawing & direction of Engineer-in-Charge. (Single / double glass panes

and silicon sealant shall be paid separately). Variation in profile dimension in higher

side shall be accepted but no extra payment on this account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%

tolerancein dimension i.e. in depth & width of profile shall be acceptable.

Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made

of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all

having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate

dimension. (Area of window above 0.75 sqm upto 1.50 sqm).

NBCC 9 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required

board, including providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to

centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm wide having one

flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of

partition fixed flush to wall with suitable anchor fastener or metal screws with nylon

plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of

frame work by 25 mm long dry wall sapproved quality, all complete as per approved

drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon

sealant shall be paid separately). Variation in profile dimension in higher side shall

be accepted but no extra payment on this account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%

tolerancein dimension i.e. in depth & width of profile shall be acceptable.t – 48dB/oct

in increments of 6dB/oct ; Compression Compressor present for each output

channel. Adjustable parameters: Threshold value: -90dB ~ +21dB; step:0.1dB;

Output EQ Each output channel has 10 EQ’s selectable to PEQ or Shelving or All

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass

Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with Sqm 161.00 1397.20 224949.20

BIS certification marks)

NBCC 10 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal

side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick

GI sheet ( Zinc coating not less than 120gm/ m²) suitable for mounting 120 min Fire

Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation

having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners

27 SOR 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable Metre 173.20 1456.45 252256.79

for fixing in the opening along with Factory made Template for SS Ball Bearing

Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall

be finished with a approved fire resistant primer or Powder coating of not less than

30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of

SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire

Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per

laboratory approved by Engineer-in-charge, with suitable mounting on door frame,

consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail

of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than

120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing

with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved

make, including applying a coat of approved fire resistant primer or powder coating

not less than 30 micron etc all complete as per direction of Engineer-in-charge

(panelling to be paid for seperately).

NBCC 11 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions

etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less

than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at

distance 75 mm from the edges and 150 mm c/c , including applying a coat of

approved fire resistant primer/ powder coating of not less than 30 micron on G.I.

beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per

NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-incharge with

29 SOR glass of required thickness having 120 minutes of fire resistance both integrity & Sqm 3.96 37924.88 150182.52

radiation control (EW120) and minimum 20 minutes of insulation (EI20). The

manufacturer have to give test report/certification of fire glass and the glass should

have the stamp showing the value of E, EW & EI. The glass shall be tested in

approved NABL accredited lab or by any other accreditation body which operates in

accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing

and calibration scopes shall be eligible. The maximum glazing size shall not be more

than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim

30 SOR Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to Each 44.00 6807.92 299548.48

be approved by the Engineer- in- charge, all complete.

Main Entry door

dormakaba or equivalent make BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size

31 MR 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door weights upto 120kgs. Each 608.00 349.44 212459.52

Template Drilled

dormakaba or equivalent make rack and pinion door closer TS 68 EN size 2/3/4, with

32 MR std. arm and with two independent closing valves and latching speed adjustable by Each 97.00 2373.28 230208.16

arm. Silver finish. As per EN 1154.

dormakabakaba or equivalent make ML 550S Digital Mortise lock in standard design

accessible by Fingerprint (100 nos.), RFID (100 Nos.), PIN (4 Nos.), BLE (10

mobiles), Mechanical Keys (3 nos.). Emergency Power: external 9VDC alkaline

battery. Mortise lock in Black with Bright Chrome Rim finish. Remote Control

dormakaba spring loaded door security chain for the main doors in satin nickle

34 MR Each 910.56

dormakaba or equivalent make door viewer 1200-1 with 180deg angle viewing

35 MR Each 492.80

adjustable and suitable for door thickness 35-55mm in satin nickle plated finish.

NBCC 12 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

dormakaba or equivalent make floor stop half dome with 45mm dia with fixing

accessories, in satin Chrome

dormakaba or equivalent make BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size

38 MR 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door weights upto 120kgs. Each 104.00 349.44 36341.76

Template Drilled

XL-H 5072 TYPE 3 Package consist of Tubular lever handle, sash lock with

39 MR 55mmbackset, CTC 72mm, 20mm forend, EPC with one side thumbturn & other side Set 13.00 2733.92 35540.96

emergency coin release, 20 SS strike plate

dormakaba or equivalent meke 4014 Wall mounted door stop with coat hook in SSS

41 MR SS Tower Bolt 12'' Each 13.00 760.48 9886.24

Package with Corner lock and BTS 65 Floor Spring with Corner Lock

1) BTS 65 F/S for Glass Door - 1PCE 2) ULPT 24 Top Pivot - 1 PCE 3) ULPT 10

with SS Cover - 1 PCE 4) ULPT 20 with SS Cover - 1 PCE 5) UL US10 with SS

Cover ith EPC 60 mm & Strike Plate - 1 PCE

dormakaba or equivalent make pull Handle TGDI-D 300 back to back with adjustable

fixing for glass, wood and metal doors in satin stainless steel. The pull handles

should have supporting washer with raised bevelling on the outer surface. Length

=300mm, 22mm dia, -SS304

dormakaba or equivalent make floor stop half dome with 45mm dia with fixing

accessories, in satin Chrome

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

etc., including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer, including welding and bolted with special shaped washers

Electric resistance or induction butt welded tubes Kg 912368.33 106.85 97484731.60

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash

fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),

46 SOR counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including

drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-

NBCC 13 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing roofing consist of 0.9 mm thick galvanized steel deck sheet

confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh

3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal

deck will be supported on structural steel beam with shear studs. (Structural steel

like Beam, column, joists etc. & concrete of different grade as per design will be paid

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,

jointed with neat cement slurry mixed with pigment to match the shade of tiles,

including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar

1:4 (1 cement: 4 coarse sand).

Light shade pigment using white cement

a Ground Floor Sqm 11.88 928.48 11030.34

b First Floor Sqm 1088.64

c Second Floor Sqm 1272.88

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab, including

rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4

a Ground Floor Sqm 85.38 1424.98 121664.45

b First Floor Sqm 68.98 1670.82 115252.89

c Second Floor Sqm 1953.50

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the shade of the slabs, including

rubbing and polishing complete.

NBCC 14 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

a Ground Floor Sqm 8.54 1296.29 11070.30

b First Floor Sqm 6.90 1519.95 10487.67

c Second Floor Sqm 1776.99

Providing and laying double charged vitrified floor tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm

thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joints with white cement and matching

pigments etc., complete.

Size of Tile 600x600 mm

a Ground Floor Sqm 444.54 1176.22 522878.62

Size of Tile 800x800 mm

a Ground Floor Sqm 2054.11 1569.23 3223375.14

Providing and laying double charged Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and conforming

to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,

over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

Providing and laying machine cut, mirror polished Marble stone flooring, in required

design (Simple geometrical, abstract etc.) and in patterns in combination with Italian

marble stones of different colours, shades and finished surface texture etc., in linear

portions of the building, all complete as per the architectural drawings, with 18 mm

54 SOR thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm,

including pointing with white cement slurry admixed with pigment to match the

marble shade, including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark

Emperadore etc.

a Ground floor Sqm 105.61 5764.08 608744.49

NBCC 15 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

c Second Floor Sqm 64.12 7901.82 506664.95

Providing and laying Polished Granite stone flooring in required design and patterns,

in linear as well as curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base

55 SOR of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

and pointing with white cement slurry admixed with pigment of matching shade

including rubbing , curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or

a Ground floor Sqm 2626.89 2945.38 7737178.76

c Second Floor Sqm 4037.71

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of

sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in

approved colour, texture and finish, having Performance Appraisal Certificate (PAC)

issued by Building Materials & Technology Promotion Council (BMTPC). The flooring

shall be fixed with tongue and groove interlocking system, with underlayment of 4mm

thick expanded polyethylene foam sheets having density 40kg/cum, over prepared

surface with necessary quarter round planks of size 1900mm x 18mm and door

reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall

have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco

friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing & fixing in position Phenol bonded Bamboowood in wall skirting with

planks of sizes 14mm thick, 1900mm length (minimum) and 85mm wide(minimum),

in approved colour, texture and finish, having Performance Appraisal Certificate

(PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The

57 SOR skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, Sqm 8.54 4914.11 41966.52

expanded polyethylene foam sheets having 40kg/cum density over prepared

surface. The bamboowood planks shall have minimum density of 1000Kg/cum &

minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per

direction of the Engineer in-charge.

NBCC 16 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and Fixing Approved make Channeled Woodworks perforated panels G-13

of width 192mm, thickness of 15mm and length 2400 mm or as required by the

Architect/ approving engineer, made of a Moisture Resistant fibre board with

minimum 595 Kg/M3 density substrate with a laminated facing as per the approved

shade & finish (Portland Maple, Sea Beach, Siam Wood, Mystique Walnut, Interior

White, Alumina Pearl) and a melamine balancing layer on the reverse side. The

boards shall have a special perforation pattern where the visible surface has a

“Helmholtz” fluted perforation of 3mm width and 13mm of visible panel each. The

edges of the panels shall be “tongue-and-grooved” to receive special clips for

installation. The back of the perforated panel shall have sound absorbing non-woven

acoustical fleece having NRC of 0.60. The panels shall be mounted on special

aluminium splines (keel) using clips provided by approved vendor and approved by

the Architect/ Engineer-in-Charge.

58 MR INSTALLATION: Sqm 332.84 7805.28 2597893.78

Install wooden battens (provided by others) of section 50x50mm or as approved by

the Architect on the solid wall horizontally using screws and plugs at spacing of

600mm centre-to-centre. Screw the aluminium extruded keel for channelled

woodworks provided by approved make over the lowest and second wooden batten

at an on-centre distance of 600mm. Install the Skirting (provided by others) of width

50mm or more as required by the Architect/ Engineer-in-Charge and insert the

tongue end of the panel in the skirting. Place the inside clip on the groove end of the

panel along the Al keel and then place the tongue end of the next panel. Continue

installing rows of panels by inserting the tongue into the groove of the earlier

inserted panel and progressively installing inside clips into the next keel till the actual

height is achieved. Finish off the edges using wooden moulding of matching colour

(provided by others). Installation to be carried out by Trained Installation team &

Installation should be carried out as per recommended procedure.

NBCC 17 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

VINYL FLOORING FOR ALL AREAS EXCLUDING OT Supply & fixing of flexible

Medintech plus /simpurity range pvc sheet flooring in 2 mm thickness in the size of 2

mtr X 20 mtr use area classification 23/34/43 results from independent testing

demonstrate that product inherently inhibits the growth of microbial strain MRSA. It

shall be homogeneous in construction. The flooring shall incorporated a specially

(PUR) to give polish free maintenance imported pvc vinyl flooring with total weight

28oo g/m2,dimensional stability EN-434, static electrical charge <2kv, impact sound

reduction approx ISO 717-2, good resistant to scratch, slip, fire ,chemical & does

not favor in growth fungi & bacteria, diamond 10 coating for more durabality, duly

installed on smooth and hard surface of self levelling compound with company

recommended adhesive, or equivalent complete as per direction of Engineer-in-

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of

5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in

between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to

be paid separately):

Curved surfaces

a Ground floor Sqm 1362.58 1152.70 1570651.42

c Second Floor Sqm 1580.21

Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo

Mat board (595x595mm) conforming to IS:13958- 1994 including providing and fixing

of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall

with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee

having powder coating on bottom side (30x25x0.3 mm thick for main member &

25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and

anchor fastener at every junction and also including cost of making openings for light

fittings, grills, diffusers,

cut outs made with frame of perimeter channels suitably fixed all complete as per

direction of Engineer-in-charge.

NBCC 18 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing fitting and fixing of GYPSUM ceilling with aluminium anodised T Section

No. 3215 with 2'-0" centr to center, L Section No.1705 up to 15 micron on 4 walls to

be fixed by means of steel screw and PVC plug and the aluminium grid 2'-0" x 2'-0"

suspended from ceiling etc. complete. Up to ground floor

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight

calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel

sections (galvanising @ 120 grams per sqm including both side) consisting of main

‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm

made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and

cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long

spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm

and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm

thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to

from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter

wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick

(minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm

63 SOR long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges

calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making

opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted

cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash

fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30

x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with

24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights,

as per specifications, drawings and as directed by Engineer-in-Charge.

Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/ opening (cut outs) having area less

than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50

(Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity <0.043 w/ mK.

a Ground floor Sqm 500.16 1499.79 750135.97

c Second Floor Sqm 2056.10

NBCC 19 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and Fixing Approved make SoundScapes – Blades which are 40 mm thick,

pre-formed fiberglass blades with sizes of 200x1200mm, 200x1600mm,

400x1200mm, 400x1600mm, 400x1800mm, 500x1200mm and 500x1600mm with

laminated scrim finish on all sides and edges, Acoustical performance of 0.65

NRC(for 400mm high x 40mm thick with baffles at 400mm row centres. Overall depth

of construction 1000mm) in standard White color with Light reflectance 87%, or in

the color specified by the Architect (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef

/ Lagoon), Fire Performance Class B – s1, d0 as per En 13501-1 and having a

recycled content of 80%.

INSTALLATION WITH DECK HANGING KIT:

The SoundScapes Blades shall be factory fitted with “female inserts” on both sides.

The blades to be suspended individually using the Approved make Deck Hanging kit

comprising of gripper structure anchors with an outer diameter of 16mm and height

64 MR 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable Sqm 305.47 14309.68 4371177.95

adjusters of 8.9mm outer diameter. Blades must be installed with minimum 100 mm

on-centre spacing. Hanger Wire Attachment to Structure: Attach the gripper

structure anchor to the structure with a fastener that will carry the full weight of the

blades. Insert the end of the cable into the gripper anchor cap. Screw the gripper

anchor cap completely into the gripper structure anchor. Insert Suspension Cables:

The panel is to be suspended using the aircraft cables which are suspended from

the soffit using the gripper structure anchors and its other end passing through the

bottom end cable adjuster. The height & level of the panels can be adjusted using

the bottom end cable adjusters. Suspend the Blade: Locate the two factory fitted

female inserts on the blades. Suspend the Blades by screwing the bottom end of the

cable adjuster into the female inserts. Installation to be carried out by Approved

make Trained Installation team & Installation should be carried out as per approved

vendor recommended procedure.

NBCC 20 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing & Fixing of Approved make Soft Fibre Acoustical Suspended Ceiling

System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed

Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9, Light

Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt

- 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application,

with Recycled content of 43% (GW) The tile shall be laid on Approved make

Silhouette profile grid system with 15mm white flanges incorporating a 6mm central

reveal in white/black colour and with a web height of 38mm and a load carrying

capacity of minimum 9.5 Kgs/M2 with a minimum pull out strength of 100 kgs.

Silhouette, Main Runners & Cross Tees to have metered ends & “birdsmouth”

notches to provide metered cruciform junctions. The T Sections have a Galvanizing

of 90 grams per M2 and need to be installed with Suspension system of Approved

INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed

to the structural soffit using Approved suspension system (specifications below) at

1200mm maximum centre. The First/Last suspension system at the end of each

main runner should not be greater than 450mm from the adjacent wall. Flush fitting

1200mm long cross tees to be interlocked between main runners at 300mm centre

to form 1200 x 300 mm module. Cut cross tees longer than 600mm require

independent support.

Perimeter trim to be Approved make wall angles of size 3000x19x19mm, secured to

walls at 450 mm maximum centres. APPROVED MAKE SUSPENSION SYSTEM -

Approved make Anchor Fastener, Hanger Wire 2.5mm dia, Hook Clip with J Wire

ROOFING SYSTEM : FOR CENTRAL LEAF

NBCC 21 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supply and fixing of“SELF SUPPORTED” SECRET FIX STANDING ROOFING

SYSTEM 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roof-

construction shall comprise of:

(1) First Layer (Top layer) – Aluminium 65/400 profile sheeting manufactured from

aluminium self-supported standing seam roof system from aluminium alloy AA 3004

H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 material thickness of 0.9mm with

PVDF2 finish (standard colours ) on the exposed surface. The profiled roof panel

should have 24nos. of Micro ribs of height 1.5mm in between 3Nos of Mini ribs for

extra strength Accessories, Fasteners. The material properties shall be as follows:

Ultimate tensile strength: minimum 200

N/mm2, 0.2% Proof Stress: min 185 N/mm2, Modulus of elasticity: 70,000

N/mm2.The roof panels shall follow the building profile . Halters to be fixed to the

purlins with SS 304 screws All installation is to be carried out by approved trained

roofing installer. The roofing system provider shall be certified with a British Board of

Agreement and should have all three Factory Mutual (FM-4471) & UL Certification

(UL-90), Thomas Bell Wright Certification/equivalent and should have at least 2 roll

formers not less than four years old in India. The Roofing system provider should

have tested the roofing system for Air Infiltration, Static Water Penetration, Dynamic

Water penetration and Water leakage Field Check as per TBW . The Test followed

All installation is to be carried out by approved and trained roofing installer.

(2) Second layer: Insulation – Layer of Rockwool insulation of 100mm thickness

each minimum 60 kg/m³ density with thermal conductivity of K=0.038 W/mk at 20

degrees Celsius when tested to ASTM C518.

(3) Third layer: Single layer of aluminium foil of minimum thickness 0.2 mm.

(4) Fourth Layer - Aluminium Halters of suitable height with thermal barrier pads to

be fixed to the sub purlins with SS 304 screws only

5) Fifth Layer: Steel Deck liner – Solid 28- 35 /200-250 galvalume colour coated

steel deck liner

ROOFING (GSM: 150)

SYSTEM FOR 550 MPa, 0.5 mm TCT 1000 mm ribs spanning up to

NBCC 22 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supply and fixing of “SELF SUPPORTED” SECRET FIX STANDING ROOFING

SYSTEM 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roof-

construction shall comprise of:

(1) First Layer (Top layer) – Aluminium 65/400 profile sheeting manufactured from

aluminium self-supported standing seam roof system from aluminium alloy AA 3004

H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 material thickness of 0.9mm with

PVDF2 finish (standard colours ) on the exposed surface. The profiled roof panel

should have 3Nos of Mini ribs for extra strength . The material properties shall be as

follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185

67 MR N/mm2, Modulus of elasticity: 70,000 N/mm2.The roof panels shall follow the

building profile . Halters to be fixed to the purlins/top hat brfacket with SS 304

screws All installation is to be carried out by approved trained roofing installer. The

roofing system provider should have all three Factory Mutual (FM-4471) & UL

Certification (UL-90), Thomas Bell Wright Certification and should have at least 2 roll

formers not less than four years old in India. All installation is to be carried out by

approved and trained roofing installer.

(2) Second layer: Insulation – Layer of Rockwool insulation of 100mm thickness

each minimum 60 kg/m³ density with thermal conductivity of K=0.038 W/mk at 20

degrees Celsius when tested to ASTM C518.

(3) Third layer: Single layer of aluminium foil of minimum thickness 0.2 mm.

(4) Fourth Layer - Aluminium Halters of suitable height with thermal barrier pads to

be fixed to the sub purlins with SS 304 screws only

5) Fifth Layer: Steel Deck liner – Solid 28- 35 /200-250 galvalume colour coated Sqm 819.00 8976.07 7351402.97

steel deck liner (GSM 150) 550 MPa, 0.5 mm TCT 1000 mm ribs spanning up to

1400 mm maximum centres (multiple spans). The finish to the exposed surface of

the liner will be polyester coating with film thickness of 23μm +/- 2 μm

Aluminium Flashing 0.9mm thick:

Flashings manufactured from aluminium alloy AA 3004(AlMn1Mg1) as specified in

68 MR BS EN 1396: 2007 material thickness of 0.9 mm and Fluorocarbon PVDF finish on Metre 1089.00 2276.54 2479152.06

the exposed surface. The material shall be same colour& material as of roofing

sheet. Girth – 400mm to 560mm

NBCC 23 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing of 2 mm thick Aluminium gutter with double side vulcanised

rubber Expansion joints at every 8m length. Necessary down take spout with

diameter upto 150 mm at required intervals & other accessories like Cover plate,

end caps and welding at joints. The Girth of gutter would be upto 1200mm. The

gutter will be insulated with 50mm thk, 48 kg/m3 density insulation, sandwiched

between the aluminium gutter top sheet and liner at the bottom.

Walkways System:

Supply & Installation of Walkway system for safe walking over standing seam roof

system. The Kingspan walkway system is of made of FRP Pultruded Grating which

comprises of 'I' Section 38 mm Height with Bearing Bar c/c 40mm & Cross Bar of

12mm Dia Round Bar c/c 150mm. The FRP gratings fulfil the load and deflection

conditions as per EN:516. Width of Walkways: 500mm. System Accessories: i)

Seam clip - made of Aluminum Alloy 6061/T6 Temper mill finished and will be as per

BS EN:755-2 specifications ii) Aluminum L-Angle - 4.0mm thick made of Aluminum

Alloy 6063/T6 Temper mill finished and will be as per BS EN 755-2 specifications.

Fasteners used are of Stainless-Steel Grade 304.

FALL PROTECTION SYSTEM: Supply & Installation of SafePro2 as per EN:795

Class C:2012. -1762 Constant Force Post system will be capable of taking load of 3

users. Systems Specifications, Type and Length, SafePro2 on 400 mm roof sheets.

Systems Certification- EN:795 Class C Approved. Testing has been done with 300

Kg weights to prove CFP’s compliance for 3 simultaneous users. Should include

1000 hours of corrosion testing in Acetic acid Salt spray test to worthiness for

minimum 5 years. Material- SS:316 Marine grade, 17/4 pH stainless steel for Cast

components and 5084 treated aluminum alloys.

72 SOR 12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

a Ground Floor Sqm 14567.61 151.54 2207517.46

c Second floor Sqm 74.07 163.86 12137.14

73 SOR 16 mm cement plaster on rough side of single or half brick wall of mix :

1:6 (1 cement: 6 coarse sand)

a Ground Floor Sqm 2337.60 216.16 505295.10

NBCC 24 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

c Second floor Sqm 100.00 227.02 22702.40

74 SOR 6 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

a Ground Floor Sqm 106.93 169.79 18155.86

b First Floor Sqm 174.05

c Second floor Sqm 178.30

Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete.

a Ground Floor Sqm 16905.21 60.82 1028107.15

b First Floor Sqm 9956.95 68.10 678028.16

c Second floor Sqm 174.07 76.50 13315.81

76 SOR Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming

coat of exterior primer applied @ 2.20kg/10 sqm

a Ground Floor Sqm 2337.60 200.48 468641.57

c Second floor Sqm 100.00 216.83 21683.20

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand

and manufacture, including applying additional coats wherever required to achieve

even shade and colour.

a Ground Floor Sqm 15422.72 90.72 1399149.23

b First Floor Sqm 8689.23 99.23 862249.71

c Second floor Sqm 74.07 109.09 8080.37

NBCC 25 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supplying and applying water based Fire intumescent paint fire tested in accordance

with BS 476 Parts 20-22 as approved make @ DFT dependent on HP/a ratio of

structural steel with polyamide cure epoxy primer (low VOC) to give additional anti-

corrosive protection having VS of 73% - 83% as approved applied over abrasive

blasted surface and surface preparation up to a standard of Sa2.5 (ISO 8501-

1:1988) or SSPC-SP6 at 75 micron and LEED V4 Compliant for VOC Content and

VOC Emissions polyurethane finish paint as approved having volume solid of 72% -

78 MR 73% @ 50 micron of the required shade over Structural Steel Works at all levels Sqm 8703.05 1904.00 16570612.42

including storage, surface preparation by sand blasting, degreasing, cleaning,

drying, providing temporary staging, scaffolding, testing etc., all complete with all

respect as desired and as per manufacturer specification and direction of Engineer

in charge. The above products should confirm to Green Building norms. Application

to be carried out by authorized manufacturer applicator or any other trained

applicator as approved by the manufacturer and direction of Engineer in charge.

(Two hrs fire rating)

Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) Sqm 79.20 1041.26 82468.11

Providing and fixing double action hydraulic floor spring of approved brand and

manufacture conforming to IS : 6315, having brand logo embossed on the body /

plate with double spring mechanism and door weight upto 125 kg, for doors,

80 SOR including cost of cutting floors, embedding in floors as required and making good the

same matching to the existing floor finishing and cover plates with brass pivot and

single piece M.S. sheet outer box with slide plate etc. complete as per the direction

of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness Each 26.00 2115.90 55013.50

Providing and fixing 12 mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom pivot &

81 SOR double action hydraulic floor spring type fixing arrangement and making necessary Sqm 64.80 4398.91 285049.50

holes etc. for fixing required door fittings, all complete as per direction of Engineer-

incharge (Door handle, lock and stopper etc.to be paid separately).

NBCC 26 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

WATER PROOFING WORK

Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS 2645 in recommended proportions including rounding off

junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with

water proofing compound in recommended proportion including rounding off junction

of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet

should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL WORK

Providing and supplying aluminium extruded tubular and other aluminium sections as

per the architectural drawings and approved shop drawings , the aluminium quality

as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating

of 60-80 microns conforming to AAMA 2604 of required colour and shade as

approved by the Engineer-in-Charge. ( The item includes cost of material such as

cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame

work. Nothing extra shall be paid on this account). The weight of aluminium extruded

section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid)

84 SOR unitized system of structural glazing (with open joints) for linear as well as curvilinear

portions of the building for all heights and all levels, including:

(a) Structural analysis & design and preparation of shop drawings for the specified

design loads conforming to IS 875 part III (the system must passed the proof test at

1.5 times design wind pressure without any failure), including functional design of the

aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats,

sleeves and splice plates etc. gaskets, screws, toggles,nuts, bolts, clamps etc.,

structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke

seals, microwave cured EPDM gaskets for water tightness, pressure equalisation &

drainage and protection against fire hazard including:

NBCC 27 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of

6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3

Dimentional movement for achieving perfect verticality and fixing structural glazing

system rigidly to the RCC/ masonry/structural steel framework of building structure

using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic

contacts with nuts and washers etc. of stainless steel grade 316, of the required

capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part

weather silicone sealant compatible with the structural silicone sealant of required

bite size in a clean and controlled factory / work shop environment, including double

sided spacer tape, setting blocks and backer rod, all of approved grade, brand and

manufacture, as per the approved sealant design, within and all around the

perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and

of sizes, shapes and profiles, as required as per the site conditions, to seal the gap

between the building structure and all its interfaces with curtain glazing to make it

(e) Making provision for drainage of moisture/ water that enters the curtain glazing

system to make it watertight, by incorporating principles of pressure equalization,

providing suitable gutter profiles at bottom (if required), making necessary holes of

required sizes and of required numbers etc. complete. This item includes cost of all

inputs of designing, labour for fabricating and installation of aluminium grid,

installation of glazed units, T&P, scaffolding and other incidental charges including

wastages etc., enabling temporary structures and services, cranes or cradles etc. as

described above and as specified. The item includes the cost of getting all the

structural and functional design including shop drawings checked by a structural

designer, dully approved by Engineer-in-charge. The item also includes the cost of

all mock ups at site, cost of all samples of the individual components for testing in an

approved laboratory, field tests on the assembled working structural glazing as

specified, cleaning and protection till the handing over of the building for occupation.

In the end, the Contractor shall provide a water tight structural glazing having all the

performance characteristics etc. all complete as required, as per the Architectural

drawings, as per item description, as specified, as per the approved shop drawings

and as directed by the Engineer- in-Charge.

NBCC 28 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded

aluminium section capping for fixing in the grooves of the curtain glazing and vermin

proof stainless steel wire mesh shall be paid for separately under relevant items

under this subhead. However, for the purpose of payment, only the actual area of

structural glazing (including width of grooves) on the external face shall be measured

in sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on structural glazing

system if area of structural glazing exceeds 2500 Sqm from the certified laboratories

accreditated by NABL(National Accreditation Board for Testing and Calibration

Laboratories), Department of Science & Technologies, India. Cost of testing is

payable separately.

The NIT approving authority will decide the necessity of testing on the basis of cost

of the work, cost of the test and importance of the work. Performance Testing of

Structural glazing system Tests to be conducted in the NABL accredited lab or by

any other accreditation body which operates in accordance with ISO / IEC 17011

and accredits labs as per ISO/ IEC 17025.

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to

+300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200

2. Static Water Penetration Test. (50pa to 1500p) as per ASTME- 331-09 testing

method for a range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing

method for a range upto 2000 ml

4. Structural Performance Deflection and deformation by static air pressure test (1.5

times design wind pressure without any failure) as per ASTME-330-10 testing

method for a range upto 50 mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4- 09 testing method for

Qualitative test, Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)

NBCC 29 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing, assembling and supplying vision glass panels (IGUs) comprising of

hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of

size and shape as required and specified, comprising of an outer heat strengthened

float glass 6mm thick, of approved colour and shade with reflective soft coating on

surface # 2 of approved colour and shade, an inner Heat strengthned clear float

glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and

secondary seal (structural silicone sealant) etc. all complete for the required

performances, as per the Architectural drawings, as per the approved shop

drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be

assembled in the factory/ workshop of the glass processor.

85 SOR (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item Sqm 1255.75 3129.62 3930015.29

For payment, only the actual area of glass on face # 1 of the glass panels (excluding

the areas of the grooves and weather silicone sealant) provided and fixed in

position, shall be measured in sqm.

(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face

# 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make

having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection

internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-

0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance

glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and

supplying at site all accessories and hardwares for the openable panels as specified

and of the approved make such as heavy duty stainless steel friction hinges, min 4 -

86 SOR point cremone locking sets with stainless steel plates, handles, buffers etc. including Sqm 125.58 3045.06 382398.13

necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as

per the Architectural drawings, as per the approved shop drawings, as specified and

as directed by the Engineerin- Charge.

NBCC 30 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing, fabricating and supplying shadow box of required size and shape, for

fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear

portions of the building by providing semi -rigid, inorganic, non-combustible fibre

glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The

insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass

insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm

and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres

distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid

aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts,

bolts, washers etc complete.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat

strengthened monolithic float glass of approved colour and shade with reflective soft

coating on surface # 2 of approved colour and shade so as to match the colour and

shade of the IGUs in the vision panels etc. ,all complete for the required

performances as specified, as per the Architectural drawings, as per the approved

shop drawings, as specified, and as directed by the Engineer- in- Charge.

For payment, only the actual area of glass on face # 1 of the glass panels (but

88 SOR excluding the area of grooves and weather silicone sealant) provided and fixed in Sqm 48.54 2048.48 99433.22

position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in

the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float

glass 6mm thick substrate with reflective soft coating on face # 2, having properties

as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to

15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U

value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be

decided by technical sanctioning authority as per the site requirement.

MISCELLANEOUS WORK

NBCC 31 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

1 Restroom Cubicles Systems - MODLE TYPE - TITAN SS SERIES,Thickness of

Compact Laminate : 12 mm Rates as per DRAWING, Color of HPL Boards: Single

Colour ,Size of Cubicle : As per Drawing (W) X 1550mm (D) X 1980mm (H), Door

Size : 1765mm (H) X 610mm (W), Divider Seize: 1775mm (H),Overall Height Of

Cubicle : 1980 mm,(Including bottom Gap of 150mm),Accessories: Standard –

89 MR Approved Make,Stainless Steel - 304 Grade accessories),a) SS “U” Channel,b) SS Each 98.00 39235.84 3845112.48

"F" Channel (Only Corner Unit),c) SS Top Rail,d) SS Coat Hook,e) SS Privacy

Thumb turn c/w Occupancy Indicator,f) SS Door Knob,g) SS Hinges with Cover,g)

SS Hinges with Cover,h) SS Adjustable Foot - 316 Grade,i) Rubber Lining for

Groove,j) S.S.Screws 304 G & P.V.C Wall Plugs,SPECIAL NOTE - Warpage Criteria

is 3.0 mm/1000mm for MRS panels as per EN standard- 438.

P/F of Lacquered glass paneling made using frame work of pinewood of section 2”x

2” grid form with 12mm ply fixed frame work free from any undulation. Top to be

finished with 4 mm lacquered glasses (duly pasted to 12 mm ply using clear silicon)

of specified color, pattern and sizes as per drawing and design.

TOTAL CIVIL WORK 342177469.37

B PLUMBING WORK

i INTERNAL PLUMBING

Sanitary Fixtures & CP Brass Fittings

Providing and fixing white vitreous china pedestal type water closet (European type)

with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush

bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with

91 MR specials of standard make and mosquito proof coupling of approved municipal

design complete, including painting of fittings and brackets, cutting and making good

the walls and floors wherever required :

W.C pan with ISI marked white solid plastic seat and lid Each 30.00 5432.00 162960.00

Providing and fixing white vitreous china flat back or wall corner type lipped front

urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with

92 MR automatic flushing cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of fittings and brackets,

cutting and making good the walls and floors wherever required :

a Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 8.00 5728.80 45830.40

NBCC 32 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

b Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern Each 10.00 7906.08 79060.80

c Range of Four urinal basins with 10litre white P.V.C. automatic flushing cistern Each 20.00 10769.92 215398.40

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole

93 MR basin mixer of approved quality and make, including painting of fittings and brackets,

cutting and making good the walls wherever required:-

White Vitreous China Wash basin size 550x400 mm with a 15 mm C.P. brass single

hole basin mixer.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with mat finish as

94 MR per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of

fittings and brackets, cutting and making good the walls wherever required :

a Kitchen sink with drain board 510x1040 mm, bowl depth 200mm. Each 3.00 4449.76 13349.28

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make

and as per the direction of Engineer-in-charge.

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste

fittings complete.

Semi rigid pipe

97 MR Providing and fixing toilet paper holder :

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white vitreous

98 MR china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 Each 65.00 12400.64 806041.60

litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc

Providing and fixing white vitreous china battery based infrared sensor operated

urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250

99 MR ml & 500 ml consumption), having water inlet from back side, including fixing to wall Each 200.00 6407.52 1281504.00

with suitable brackets all as per manufacturers specification and direction of

Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore Each 130.00 407.68 52998.40

NBCC 33 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to

IS standards and weighing not less than 690 gms.

15 mm nominal bore Each 30.00 536.48 16094.40

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931

15 mm nominal bore Each 290.00 517.44 150057.60

Providing and fixing 15mm C.P. copper connecting pipe 450mm long with C.P. brass

nuts, washers complete in all respects of approved makes and as per design.

Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS

screws of approved makes and as per design.

Providing and fixing health faucet with 1 m long flexible tube and wall hook including

all fittings of approved makes and as per design.

Providing and fixing 15mm C.P brass Sink Mixer Jaguar Model. No. FLR-5165 or

106 MR approved equivalent.) for kitchen sink with swinging spout complete. Including Each 3.00 3505.60 10516.80

cutting and making good the walls wherever required .

Providing and fixing of C.P. brass 600 mm size towel rail Jaguar Cat. No. AKP-

35711P or equivalent fixed with C.P. brass screws complete in all respects.

Providing and fixing of C.P. brass Soap Dish of approved makes and as per design.

fixed with C.P. brass screws complete in all respects.

Providing and fixing liquid soap dispenser including all fittings complete of approved

makes and as per design.

Providing & fixing SS Grab Bar Euronics Model No. EGR (S02) & SS Grab Rail

110 MR Euronics Model No. EGR 01 or approved equivalent,Including cutting and making Each 12.00 9337.44 112049.28

good the walls wherever required.

Providing and fixing 150 litre/ hr. cooling and storage capacity,fully stainless steel

electric storage type water cooler (Blue Star model No. SDLX 15150 or equvalant)

111 MR with inlet hose connection inbuilt float valve. 2 Nos. outlet foucet, drain tray with Each 5.00 64939.84 324699.20

waste and pipe up to fllor trap heavy compressor and wire up to socket, 3 pin plug

etc complete in all respect.

Supplying, installation, testing and commissioning of skid mounted fully automatic

112 MR Reverse Osmosis System of output capacity 50 litres / hour designed at a minimum Each 2.00 86586.08 173172.16

Flux at inlet complete as required.

Providing and laying in position cement concrete of specified grade excluding the

cost of centring and shuttering. All work up to plinth.

NBCC 34 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size )

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)

114 MR over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 Each 45.00 513.05 23087.26

cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making

and finishing the outlet complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.

MR Providing and fixing soil, waste and vent pipes :

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside

Hubless centrifugally cast (spun) ironpipes epoxy coated inside & outside IS:15905

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989.

Hubless centrifugally cast (spun) ironepoxy coated inside & outside as per IS:15905

119 MR Providing and fixing plain bend of required degree.

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

120 MR Providing and fixing heel rest sanitary bend

Sand cast iron S&S as per IS - 3989 Each 200.00 420.00 84000.00

121 MR Providing and fixing double equal plain junction of required degree.

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing single equal plain junction of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

Sand cast iron S&S as per IS - 3989 Each 80.00 702.24 56179.20

123 MR Providing and fixing single equal plain junction of required degree.

NBCC 35 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing terminal guard.

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

125 MR Providing and fixing collar

Sand cast iron S&S as per IS - 3989 Each 80.00 397.60 31808.00

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

Providing and fixing MS Stay clamps for sand cast iron/ centrifugally cast (spun) iron

pipes of diameter.

Providing and fixing trap of self cleansing design with screwed down or hinged with

128 MR or without vent arm complete, including cost of cutting and making good the walls

100 mm inlet and 100 mm outlet

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Painting sand cast iron/ centrifugally cast (spun) soil, waste, vent pipes and fittings

129 MR with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of

approved quality) for new work.

a 100 mm diameter pipe Metre 1200.00 77.90 93475.20

b 75 mm diameter pipe Metre 54.71

c 150 mm diameter pipe Metre 100.00 101.92 10192.00

Providing and fixing soil, waste and vent pipes including all fittings and jointing

Centrifugally cast (spun) Iron S&S as per IS: 3989 Metre 900.00 1568.00 1411200.00

Providing and fixing cast brass floor clean out plug with suitable insert keys for

opening, male threaded joint with GI threaded socket drip seal to soil / waste pipe of

CI pipe as required complete as per drawing approved sample and direction of

engineer in charge.

a 100 mm dia Each 1387.68

NBCC 36 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing in position 110x63 mm dia uPVC reducing elbow including fix to

floor with cement mortar.

Providing and fixing 100 mm dia GI inlet fitting/ Extension Piece with 2 or 3 inlets of

133 MR 32 to 50 mmdia, fixed to CI trap with lead joint and set in cement concrete as per Each 400.00 881.44 352576.00

drawing complete.

Providing and fixing in position 125x125 mm stainless steel grating for floor trap/floor

drain including fix to floor with cement mortar.

Water Supply System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as per direction of

Engineer in Charge

Concealed work including cutting chases and making good the walls etc.

a 15 mm nominal outer dia .Pipes. Metre 800.00 411.82 329459.20

b 20 mm nominal outer dia .Pipes. Metre 900.00 479.36 431424.00

c 25 mm nominal outer dia .Pipes. Metre 1200.00 560.00 672000.00

d 32 mm nominal outer dia .Pipes. Metre 300.00 673.12 201936.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step CPVC solvent cement,

trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge

Internal work - Exposed on wall

a 15 mm dia nominal bore Metre 200.00 156.80 31360.00

b 20 mm dia nominal bore Metre 500.00 207.20 103600.00

c 25 mm dia nominal bore Metre 300.00 268.80 80640.00

d 32 mm dia nominal bore Metre 760.00 306.88 233228.80

e 40 mm dia nominal bore Metre 500.00 461.44 230720.00

f 50 mm dia nominal bore Metre 525.00 710.08 372792.00

g 65 mm dia nominal bore Metre 50.00 1415.68 70784.00

h 80 mm dia nominal bore Metre 50.00 1817.76 90888.00

i 100 mm dia nominal bore Metre 20.00 2555.84 51116.80

NBCC 37 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

a 20 mm dia nominal bore Each 12.00 448.00 5376.00

b 25 mm dia nominal bore Each 50.00 483.84 24192.00

c 32 mm dia nominal bore Each 30.00 565.60 16968.00

d 40 mm dia nominal bore Each 20.00 659.68 13193.60

e 50 mm dia nominal bore Each 20.00 845.60 16912.00

f 65 mm dia nominal bore Each 20.00 1447.04 28940.80

g 80 mm dia nominal bore Each 10.00 2156.00 21560.00

Providing and fixing of Single phase electrical actuator operated wafer type rubber

lined butterfly valve with by pass arrangement as per drawing attached including

138 MR level controller, 3 nos. normal butter fly valves,necessary control and Power cables

(Maximum 10 M. Length of each type) and control panel installed on OH tank filling

line near the tanks complete in all respects.

TOTAL INTERNAL PLUMBING WORK 13363910.14

ii EXTERNAL PLUMBING

EXTERNAL SEWERAGE SYSTEM

SEWERAGE NETWORK

Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including

getting out the excavated soil, and then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating each deposited layer by ramming,

watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50

All kinds of soil

up to 1.50 m depth

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 400.00 249.76 99904.00

NBCC 38 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth

140 MR exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for Metre 30.00 407.90 12237.12

depth upto 1.5 metre).

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded

141 MR stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed

concrete as per standard design :

a 150 mm diameter Metre 100.00 705.60 70560.00

b 200 mm diameter Metre 200.00 828.80 165760.00

c 250 mm diameter Metre 40.00 964.32 38572.80

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement 4 coarse sand

) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3

graded stone aggregate 20 mmnominal size), foundation concrete 1:4:8 mix (1

cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal

size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse

sand) finished with floating coat of neat cement and makinchannels in cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal

size) finished with a floatingcoat of neat cement complete as per standard design

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

455x610 mm internal dimensions, total weight of cover and frame to be not less than

38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 10.00 13571.51 135715.11

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated

as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum

cross section as 23 mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs having 2 mm tread on

top surface by ribbing or chequering besides necessary and adequate anchoring

143 MR projections on tail length on 138 mm as per Each 200.00 510.43 102085.91

standard drawing and suitable to with stand the bend test and chemical resistance

test as per specifications and having manufacture’s permanent identification mark to

be visible even after fixing, including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm

nominal size) complete as per design

NBCC 39 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.

grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm

size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less

than 2.70 kg as per standard design:

180x150 mm size P type

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

DRAINAGE NETWORK

Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including

getting out the excavated soil, and then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating each deposited layer by ramming,

watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50

All kinds of soil

up to 1.50 m depth

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 300.00 249.76 74928.00

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth

146 MR exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for Metre 20.00 407.90 8158.08

depth upto 1.5 metre).

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars

147 MR jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc. complete. (for storm drainage)

a 150 mm dia RCC pipe Metre 100.00 604.80 60480.00

b 250 mm dia RCC pipe Metre 200.00 638.40 127680.00

c 300 mm dia RCC pipe Metre 967.29

d 400 mm dia RCC pipe Metre 1559.82

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement

148 MR mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal

grating with frame complete as per standard design :

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

NBCC 40 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement 4 coarse sand

) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3

graded stone aggregate 20 mmnominal size), foundation concrete 1:4:8 mix (1

cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal

size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse

sand) finished with floating coat of neat cement and makinchannels in cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal

size) finished with a floatingcoat of neat cement complete as per standard design

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

455x610 mm internal dimensions, total weight of cover and frame to be not less than

38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6.00 13571.51 81429.06

Providing orange colour safety foot rest of minimum 6 mm thick plastic ncapsulated

as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum

cross section as 23 mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs having 2 mm tread on

top surface by ribbing or chequering besides ecessary and adequate anchoring

150 MR projections on tail length on 138 mm as per Each 150.00 510.43 76564.43

standard drawing and suitable to with stand the bend test and chemical resistance

test as per specifications and having manufacture’s permanent identification mark to

be visible even afterfixing, including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm

nominal size) complete as per design

EXTERNAL WATER SUPPLY SYSTEM

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and

a 25mm nominal bore Metre 120.00 280.00 33600.00

b 50mm nominal bore Metre 300.00 468.16 140448.00

c 80mm nominal bore Metre 65.00 750.40 48776.00

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

a 25mm nominal bore Each 1.00 483.38 483.38

b 50mm nominal bore Each 4.00 845.10 3380.41

c 80mm nominal bore Each 5.00 2156.47 10782.34

NBCC 41 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes

in external work.

a 25mm nominal bore Metre 5.20 192.64 1001.73

b 50mm nominal bore Metre 20.00 207.20 4144.00

c 80mm nominal bore Metre 10.00 338.24 3382.40

154 MR Providing and fixing gun metal non- return valve of approved quality (PN 1.6)

a 50 nominal bore Each 2.00 1112.38 2224.76

b 80 nominal bore Each 1.00 2811.20 2811.20

RAIN WATER HARVESTING

DESILTING CHAMBER (1 No.)

Earth work In excavation by mechanical means (Hydraulic excavator)/manual means

over areas (exceeding 30cm in depth. 1.5m in width as per as 10 sq.m on plan)

including disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed

earth to be levelled and neatly dressed.

All kinds of soil Cum 8.40 209.44 1759.65

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

156 MR foundations etc. in layers not exceeding 20cm in depth, consolidating Each Cum 5.60 240.80 1348.48

deposited layer by ramming and watering , lead up to 50 m and lift up to 1.5m.

157 MR Extra for every additional lift of 1.5 m or part there of in:

All kinds of soil. Cum 3.65 104.16 380.18

Providing and fixing up to floor two level precast cement concrete string or lacing

courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers,

steps, stair cases, etc. Including hoisting and setting in position with cement mortar

1:3 (1 Cement : 3 sand), cost of required centering, shuttering and finishing smooth

with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces

Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) (With 20mm

nominal size graded stone aggregate)

159 MR Centring and shuttering including strutting, proppintg etc. and removal of form for:

Suspended floors,roofs, landings, balconies and access platform. Sqm 2.00 776.22 1552.43

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills,

string courses, bands, copings, bed plates, anchor blocks and the like.

161 MR Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level

NBCC 42 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 23.55 93.52 2202.40

Providing and laying in position machine batched and machine mixed design mix M-

25 grade cement concrete for reinforced cement concrete work, using cement

content as per approved design mix, including pumping of concrete to site of laying

162 MR but excluding the cost of centering, shuttering, finishing and reinforcement, including

admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting

of concrete, improve workability without impairing strength and durability as per

direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less

cement used as per design mix is payable/recoverable separately).

All works upto plinth level. Cum 2.30 8956.98 20601.04

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation

7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in

Cement mortar 1:6 (1 cement : 6 sand) Cum 5.25 8501.30 44631.85

164 MR 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Cum 15.00 298.87 4483.08

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of

165 MR cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of

joints etc. complete:

200 mm diameter Metre 3.00 889.56 2668.68

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required

shape and approved quality

Rectangular shape 600x450mm internal dimensions Each 2.00 1376.37 2752.74

RECHARGE PIT (1 No.)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.M on

167 MR plan) including dressing of sides and ramming ob bottoms, lift upto 1.5m, including

getting out the excavated soil and disposal of surplus excavated soil as directed,

withen a lead of 50m.

All kinds of soil Cum 59.17 282.58 16720.02

Extra for every additional lift of 1.5 m or part thereof in excavation /banking

excavated or stacked materials.

All kinds of soil Cum 22.60 101.25 2288.20

NBCC 43 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

169 MR foundations etc. in layers not exceeding 20cm in depth, consolidating Each Cum 25.65 246.01 6310.11

deposited layer by ramming and watering , lead up to 50 m and lift up to 1.5m.

Providing and fixing up to floor two level precast cement concrete string or lacing

courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers,

steps, stair cases, etc. Including hoisting and setting in position with cement mortar

1:3 (1 Cement : 3 sand), cost of required centering, shuttering and finishing smooth

with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces

Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) (With 20mm

nominal size graded stone aggregate)

171 MR Centring and shuttering including strutting, proppintg etc. and removal of form for:

Suspended floors,roofs, landings, balconies and access platform. Sqm 10.75 776.22 8344.32

MR Edges of slabs and breaks in floors and walls,

Under 20 cm wide Metre 12.56 194.04 2437.14

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing

in position and binding all complete upto plinth level

Thermo-Mechanically Treated bars.(TMT) Kg 100.00 93.52 9352.00

173 MR Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

MR Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 17.65 8501.30 150048.02

174 MR 12 mm thick cement plaster of mix

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of

175 MR cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of

joints etc. complete:

200 mm diameter Metre 3.00 889.56 2668.68

Boring/drilling bore well of required dia for Casing/ strainer pipe, by suitable method

prescribed in IS: 2800 (part I), including collecting samples from different strata,

176 MR preparing and submitting strata chart/bore log, including hire & running charges of all

equipments, tools, plants & machineries required for the job, all complete as per

direction of Engineer –in-charge, upto 90 metre depth below ground level.

All types of soil

NBCC 44 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supplying, assembling, lowering and fixing in vertical position in bore well,

unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:

12818, including required hire and labour charges, fittings & accessories etc. all

complete, for all depths, as per direction of Engineer –in-charge.

150 mm nominal size dia. Metre 25.00 773.64 19341.00

Supplying, filling, spreading and leveling gravels of size range 5 mm to 20 mm, in the

178 MR recharge pit, over the existing layer of boulders, in required thickness, for all leads Cum 4.90 1485.74 7280.11

and lifts, all complete as per direction of Engineer-in-charge

Supplying, filling, spreading and leveling coarse sand of size range 1.5 mm to 2 mm

179 MR in recharge pit, in required thickness over gravel layer, for all leads and lifts, all Cum 4.90 1485.74 7280.11

complete as per direction of Engineer-in-charge.

Providing and fixing factory made precast RCC perforated drain covers, having

concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8

mm dia four no longitudinal and 9 nos cross sectional T.M.T. hoop bars, including

providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge

binding with M.S. flats of size 50 mmx1.6 mm complete, all as per direction of

Engineer-in-charge.

Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less

181 MR than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second Sqm 9.42 1622.15 15280.67

class teak wood and priming coat with approved steel primer all complete.

Providing and laying below ground unplasticised PVC pipe to with stand

working pressure of 4 kglcm2 soild waste pipes confirming to IS:13592 and

182 MR IS:4985 including jointing with seal ring confirming to IS :5282 leaving 1Omm

gap for thermal expansion all necessary fittings etc. complete. Excavation to be

paid seperataly.

110 mm diameter OD Metre 15.00 235.87 3538.08

Providing and fixing unplasticised PVC moulded fittings/accessories for

unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A

including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal

a Single tee with door

NBCC 45 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Design, Supply, Installation, testing and commissioning of Sewage Treatment Plant

(STP) of 30 kld capacity in mechanical type of approved make for the treatment of

domestic sewage using advanced Moving Bed Bio Reactor(MBBR) Technology and

successful commissioning of the plant including all consumables etc all complete as

per drawings. Approved make according to relevant standards, technical

specifications, polution control board local by laws, and direction of Engineer-In-

Charge. The characteristics of the Influent and desired quality of Treated water from

184 MR the System are mentioned in the technical specifications. The system shall be Job 1.00 3957276.96 3957276.96

complete with all equipments including Air Blowers, pumps for mechanical functional

and irrigation transfer,Flushing transfer pump, MBBR media, air diffusers,ozonator,

internal piping etc, Pre Fabricated MS tanks (PVA Gel tank,Activated sludge

Tank,Anoxic tank & Tube Settler) , Activated Carbon Filters, Dual Media Filters,

electrical panels, Ultrafiltration, ozonator, Pva gel media cabling etc complete in all

respect. Blowers and pumps will be in combination of one working and one standby.

Details of equipment shall be as mentioned in the Technical specifications.

Boring/drilling bore well of required dia perfectly vertical to receive casing/

strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting

samples from different strata, preparing and submitting strata chart/bore log,

including hire and running charges of all equipments, tools, plants and machineries

required for the job, all complete as per direction of Engineer -in- charge, upto 90

metre depth below ground level.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW

(Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended

casing pipes of required dia, conforming to IS: 4270, of reputed and approved make,

186 MR including painted with outside surface with two coats of anticorrosive paint of

approved brand and manufacture, including required hire and labour charges,

fittings and accessories, all complete, for all depths, as per direction of Engineer- in-

200 mm nominal size dia having minimum wall thickness 5.40 mm Metre 100.00 1383.20 138320.00

NBCC 46 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing suitable size threaded mild steel cap or spot welded plate to

187 MR the top of bore well housing/ casing pipe, removable as per requirement, all

complete for borewell of:

Blank socket or Mild steel plug 200 mm dia Each 20.00 491.90 9838.08

Supplying & Installation of required capacity of single phase, 50 Hz,220V, deep well

submersible pump Stainless Steel body, as per IS of approved Make, suitable for

188 MR 4"/6 " tube well with Control Panel Starter suitable for Submersible pump with dry run

protection, connections, including clamps, bore cap etc. as required as per

specifications but excluding Pipe, SS/Nylon wire rope and connection cable.

5 H.P. with 15 to 17 stages, Head Mt 119-45, Discharge LPM 40-125 Each 1.00 64727.04 64727.04

Supplying and laying of submersible flat cable ISI marked 3 core copper wire of

suitable size with proper clamping of approved make.

6.0 Sq.mm multi strand Metre 75.00 682.08 51156.00

Supplying and laying of approved Make HDPE pipe as per IS : 4984 and IS : 14333

with latest amendment for installation of submersible pump with necessary

connection, socket/couplings, Tees,etc. as required (PE-63 & working Pressure 10

25 mm Outer Dia. Metre 75.00 84.00 6300.00

Supplying and laying of approved Make Nylon rope 12 mm thick complete with

binding for support of pump and motor.

Supply, installation, testing & commissioning of vertical inline multistage pumping set

with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304

casing, Stainless steel-316 shaft and C.I. base & head with mechanical seal,

connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50

192 MR cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock,

vibration eliminating pads under foundations, 80x40 mm I section base plate bolted

to cement concrete foundations complete including CC foundation of suitable size

with angle iron lining.Vendor to submit performance curves and technical catalogue

of the proposed model for review and information.

a Filter Feed Pump (Domestic Water) in Water Supply Pump Room

Set of Two Pumps (1 Working + 1 Standby)

Capacity 3.0 LPS

NBCC 47 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

b Raw Water Pumps from UGT to STP .

Set of Two Pumps (1 Working+ 1 Standby)

Capacity 3.5 LPS

Supply, installing, testing and commissioning of submersible dewatering single stage

single entry pumps with C.I.body and C.I. two vane enclosed type impeller, SS-304

shaft connected to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles

A.C. power supply with mechanical seal, pump connector unit with rubber

diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level

controller, sequence running controller, arrangement for both pumps running

together in case of emenegency, audible hooter for failure or flooding, dry running

Protection complete in all respects.

(Pumps shall be installed in a set of two pumps One working and One standby)

Pump Room Drainage Pumps

(Pumps to be suitable to handle solids upto 15 mm size)

Capacity - 4.5 LPS (Each)

Providing, installing, testing and commissining of variable speed (VSPS)

hydropneumatic system mounted on a common base plate under cement concrete

foundation with angle iron lining comprising of vertical centrifugal pumping set with

Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing,

Stainless steel-316 shaft and mechanical seal, shaft directly coupled to a TEFC

induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150

mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads

under foundation, one No. microprocessor based controller, dedicated variable

frequency drive for each pump, one No.remote sensors, pressure transducers,

sequence running cotroller, dry running Protection, motor control centre, necessary

power and control cabling from MCC to pumps including required rating of MCB, one

No. 100 litre capacity M.S diaphragam tank with interchangeable butyl rubber

membrane or as per manufacturer calculation,complete in all respects including CC

foundation of suitable size,

NBCC 48 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

including stainless steel grade 316 pipe suction and delivery headers and isolation/

control valves( ball valves/butterfly valves/ Non return valves/ vibration eliminators

etc as required) , power box, equipped with fuses/ isolators/circuit breakers as

Hydropneumatic System for Domestic Water Supply in Water Supply Pump Room

Set of Two Pumps (1 Working + 1 Standby)

Capacity 4.0 LPS

b Hydropneumatic System for Flushing Water Supply in STP Pump Room

Set of Two Pumps (1 Working + 1 Standby)

Capacity 3.0 LPS

195 MR Hydropneumatic System for Irrigation Water Supply at STP Pump Room

Set of Two Pumps (1 Working + 1 Standby)

Capacity 5.0 LPS

Supply Installation,Testing & Commissioning of vertical self supporting Filter

fabricated from MS sheet as per IS: 2825, (minimum thickness of shall 6 mm and

dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI

196 MR butterfly valves and all accessories , with initial charge of filter media including

anthracite, painting inside with epoxy paint and outside with two coat of red oxide

primer and two or more coat of synthetic enamel paint, testing and commissioning

complete including CC foundation of suitable size.

a Dual Media Filter For Domestic Water Supply

Capacity- 10800 LPH

Filtration rate- 14000 LPH/Sqm.

Filter dia approx. - 1000 MM

Working pressure: 3.0 Kg/sq cm.

Test pressure : 4. 5 Kg/sq cm Each 1.00 183996.96 183996.96

b Activated Carbon Filter For Domestic Water Supply

Capacity- 10800 LPH

Filtration rate- 14000 LPH/Sqm.

NBCC 49 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Filter dia approx. - 1000 MM

Working pressure: 3.0 Kg/sq cm.

Test pressure : 4. 5 Kg/sq cm Each 1.00 201246.08 201246.08

Supply Installation,Testing & Commissioning of metering pump type chemical doser

with 200 lits. HDPE chemical grade solution tank,injection fitting assembly,suction

and delivery hose upto the point of injection, capacity 0-12 lph, complete in all

Chlorination of Domestic Water Each 1.00 31624.32 31624.32

Design, manufacture, supplying, fixing in position, testing and commissioning of the

following front operated cubicle type, front access 2mm thick mild steel sheet, free

standing, dust and vermin proof, switchboard with IP42 protection with hinged and

lockable doors complete with interconnections, tinned copper crimping lugs, bonding

to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and

suitable for a fault level of 25 MVA symmetrical at 415 volts.

All switchboards shall have provision for entry of cables from the top or bottom as

All live accessible parts shall be shrouded and all equipment shall be finger touch

proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC

shrouds and busbar supports shall be used. Padlocking facility shall be provided on

all outgoing feeders doors and switch handles shall be lockable in OFF position.

Electric Panel For Water Supply Pumps at Water Supply Pump Room

1 No. 150 amps TP + NL MCCB with the following accessories:

1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF

Three phase indicating lights.

Electrolytic high conductivity three phase and neutral tinned alluminium bus bar

rated at 200 amps having a current density of 1 amp per Sqm suitable to with stand

symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100%

6 Nos 25 Amp. TPN MCB of breaking capacity 10KA

NBCC 50 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

1 No. TPN MCB of 63 A with 10 KA service breaking capacity for domestic water

hydropneumatic pumps. (Only connection to inbuilt panel of domestic water

hydropneumatic system)

6 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights

and overload relays for 2.0 to 5.0 HP pumps.

6 Nos. selector switch for selecting mode of operation i.e. auto/manual/off.

6 Nos.cyclic relay for automatic duty changeover of pumps.

6 No. single phase preventors.

6 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF

selector switch.

Space for 4 Nos. Level Controllers.

Switchgear shall be suitable for the HP of various motors.

2 No.25 Amp. TPN MCB Spare.

The motor control panel shall be prewired with colour coded wires with identification

labels complete in all respects as required.

To start pump when water level is low in Domestic Water U.G. tank and shut off

199 MR pump when Domestic Water U.G. tank is full. Also to stop when water level is low Each 5.00 7474.88 37374.40

in raw water underground tank.

For Sump Pumps:

To start pump when water level is high in sump and shut off pump when sump is

empty. Both pumps are start when sump is over flowing.

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe

conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers,

200 MR nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

201 MR bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

NBCC 51 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing, installation, testing and commissioning of non-return valve of following

202 MR sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers

etc.as required :

Providing and fixing resilient rubber neoprene lined style arch vibration eliminators

203 MR suitable for raw water upto 45 deg.C. Temperature working pressure upto 25

Providing and fixing heavy duty armoured cables 1.1 KVA grade including

204 MR necessary support clamps at ceiling level and connection lugs complete in all

a Power cable Copper 3 core 10 sq.mm Metre 35.00 338.24 11838.40

b Power cable 3 core 6 sqmm Metre 50.00 210.56 10528.00

c Power cable Copper 3 core 4 sq.mm Metre 50.00 153.44 7672.00

d Control cable copper 2 core 1.5 sq.mm Metre 125.00 69.44 8680.00

Providing, installation, testing and commissioning of stainless steel Y-strainer

205 MR fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes

with stainless steel flange.

TOTAL EXTERNAL PLUMBING WORK 9224996.70

C FIRE FIGHTING WORKS

Supplying, installation, testing and commissioning of electric driven terrace pump

206 MR suitable for automatic operation and consisting of following, complete in all respects,

as required: (Terrace Pump)

Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical confirming to IS : 1520

NBCC 52 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Suitable HP squirell cage induction motor TEFC type suitable for operation on 415

volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure,

horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as

Suitable cement concrete foundation duly plastered and with anti vibration pads.

900 lpm at 35 m Head Set 113059.52

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,

207 MR gaskets etc. in ground including welding, excavation & providing cement concrete

blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS

10221, refilling the trench etc. of following sizes complete as required.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges,

208 MR tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Supplying and fixing single headed internal hydrant valve with instantaneous

Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked

conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain

Single headed Stainless steel Set 8.00 8099.84 64798.72

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

210 MR bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

NBCC 53 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304)

with orifice of required size to be fitted between flange & landing valve of external

and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2

complete as required.

Providing, installation, testing and commissioning of non-return valve of following

212 sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers

etc.as required :

Providing, installation, testing and commissioning of stainless steel Y-strainer

213 MR fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes

with stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and

214 MR female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A)

Stainless Steel (Grade 304) Set 18.00 5498.08 98965.44

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post

office red, conforming to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal

216 MR internal diameter size nozzle conforming to IS 903 suitable for instantaneous

connection to interconnect hose pipe coupling as required :

Stainless Steel (Grade 304) Set 9.00 1848.00 16632.00

Supplying and fixing of fire brigade connection of cast iron body with gun metal male

217 MR instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia

MS pipe connection conforming to IS 904 as required :

a 2 way - 100 mm dia M.S. Pipe Set 1.00 6496.00 6496.00

NBCC 54 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm

in height with air release valve on top and flanged connection to riser, drain

218 MR arrangement with 25 mm dia gun metal wheel valve with required accessories, Set 1.00 21193.76 21193.76

pressure gauge and paintingwith synthetic enamel paint of approved shade as

Providing and fixing of Weather proof hose cabinets fabricated from 14 g M.S. Sheet

with full glass door and mortise locking arrangement , suitable to accommodate one

Hydrant landing valve, 2 nos. 15 M long hose and 1 No branch pipe. The cabinet

shall be painted with one coat of primer and finished stove enamelled "Fire Red",

"Fire Hose" written on front including suitably mounted on a raised masonry platform

as required. (Approx 0.75mx0.6 m x 0.25 m).

Providing and fixing MS partly glazed single/double hung lockable shutter fabricated

from MS section as required with 5 mm thick glass for fire station complete including

stove enamelled painting of door and frame and words "Fire Hydrant" written on

220 MR glass, suitable to accommodate 2 Hydrant landing valves, 1 fire hose reel, 2 Each 4.00 7616.00 30464.00

nos.15m long 63 mm dia hose,1-branch pipe, 1no. fire man's axe, fire extiguishers 2

nos, including suitably mounted on a raised masonry platform as required.

(Approx.size 0.90 m x 2.1m )

Providing and fixing in position the industrial type pressure gauges with gun metal /

brass valves complete as required

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators

222 MR with unit control suitable for raw water upto 450C temperature working pressure 25

kg and test pressure 37.5 kg/cm2.

Providing and fixing heavy duty PVC insulated, PVC armoured conductor cables

223 MR 1100 V grade including necessary support clamps and connection lugs complete in

a Power cable 3 core 16 sq mm aluminium conductor armoured cable. Metre 5.00 122.08 610.40

b Control cable copper 2 core 1.5 sq.mm Metre 5.00 77.28 386.40

Providing and fixing carbon-di-oxide type fire extinguishers consisting of pressure

tested single cast cylinder with rotary discharge valve and high pressure discharge

224 MR tube of minimum 1 m length, discharge horn, suspension bracket conforming to

IS:15683 finished externally with red enamel paint and fixed to wall with brackets

complete with internal charge (Halon Free Gas)

NBCC 55 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all

accessories internal discharge tube,high pressure discharge hose,discharge nozzle,

ISI marked as per IS:2878 finished externally with red enamel paint. (Halon Free

Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S.

cylinderical body, squeeze lever discharge valve fitted with pressure indicating

guage internal discharge tube 30 cms long high pressure discharge hose, discharge

nozzle, suspension bracket conforming to IS:15683 finished externally with red

enamel paint and fixed to wall with brackets complete with internal charge. (Halon

Design, manufacture, supplying, fixing in position, testing and commissioning of the

following front operated cubicle type, front access 2mm thick mild steel sheet, free

standing, dust and vermin proof, switchboard with IP42 protection with hinged and

lockable doors complete with interconnections, tinned copper crimping lugs, bonding

to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and

suitable for a fault level of 25 MVA symmetrical at 415 volts.

MCC for Fire Fighting Pumps at Terrace

a) One 100 amp. TP +NL M.C.C.B. with rotary handle of breaking capacity 25 KA

b) One-Volt Meter (0-500 V) with selector switch

c) One Set indicating lamps

BUS BARS OUTGOING

a) 100 Amp TPN BUS BAR (Aluminium).

b) One - 63 Amp.TP +NL M.C.C.B. with rotary handle of breaking capacity 35KA

c) One Fully Automatic D.O.L Starter suitable for Jockey Pump Motor 15 KW with

over load relay, timer push buttons and Auto/Manual selector switch

d) One panel type Amp. meters one for each motor with ASS. CTS etc.

e) One sets of On/Off - neon indicating lamp.

i) All interconnecting power & control wires/cables suitable size within the panel and

from panel to motors , pressure switches, level switches, cable Tray, pipes etc.

including brass glands termination within fire pump house and earthing as per

specifications.

NBCC 56 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supplying, installation, testing and commissioning of Electric driven Main Fire

228 MR Pump suitable for automatic operation and consisting of following, complete in

all respects, as required :

Horizontal type, multistage, centrifugal, split casing pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500

RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP

55 protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc.

Suitable cement concrete foundation duly plastered with anti vibration pads.

Supplying, installation, testing and commissioning of electric driven

229 MR pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and bronze

impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.

Suitable HP squirell cage induction motor TEFC type suitable for operation on

415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for

enclosure, horizontal foot mounted type with Class-'F' insulation,

conforming to IS : 325.

Motor Must be as per Griha Specifed

230 MR FIRE PUMPS - DIESEL

Supplying, installation, testing and commissioning of diesel engine driven

main fire pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Diesel Driven

Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller

with stainless steel shaft, mechanical seal conforming to IS 1520.

NBCC 57 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming

to relevant IS standard complete with auto starting mechanism, 12 /24 volts

electric starting equipment, diesel tank, exhaust pipe extended upto 10 m

outside pump house duly insulated with 50 mm thick glass wool with 1.0

mm thick aluminium sheet cladding, residential silencer, instruments

and protection as per standard specification, stop solenoid for auto stop in

the event of fault with audio indications, painted with post office red colour etc. as

M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

Supplying, fixing and commissioning 500 ltrs. capacity including first fill of 500 ltrs

high speed diesel oil in 16 SWG MS steel oil tank with manhole cover, glass gauge,

231 MR inlet and outlet connections with gate valves, drain plug, GI piping between tank and Set 1.00 84995.68 84995.68

engine vent pipe with wire mesh etc. duly painted and mounted on suitable MS angle

staging to maintain gravity flow of oil.

PRESSURE SWITCH

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm

in height with air release valve on top and flanged connection to riser, drain

233 MR arrangement with 25 mm dia gun metal wheel valve with required Each 2.00 19600.00 39200.00

accessories, pressure gauge and painting with synthetic enamel paint of

approved shade as required.

Providing, fixing, testing & commissioning of resilient rubber lined single arch

234 MR vibration eliminators suitable for raw water up to 45 deg. C temperature, working

pressure 16 Kg/cm2 and test pressure 24 Kg/cm2 for :-

Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16

235 MR Pressure rating as specified 100 mm nominal bore. It should be complete in all

respect & as per directions of Engineer-in-charge.

NBCC 58 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing, installation, testing and commissioning of non-return valve of

236 MR following sizes confirming to IS: 5312 complete with rubber gasket, GI

bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of stainless steel Y-strainer

237 MR fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm

dia holes with stainless steel flange.

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63

mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel,

ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless

Steel cap and chain as required :(EXTERNAL FIRE )

Single headed Gunmetal Set 10.00 8400.00 84000.00

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male

and female couplings duly bound with GI wire, rivets etc. conforming to IS

636(EXTERNAL FIRE)

(type-A) as required :

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal

internal diameter size nozzle conforming to IS 903 suitable for instantaneous

connection to interconnect hose pipe coupling as

required :(EXTERNAL FIRE)

iv) Providing & Fixing of M.S. fire hose weather proof cabinet (750x600x250mm)

made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose

241 MR pipes, fittings & accessories. The box shall have a front glass door with lock and key Set 10.00 16240.00 162400.00

arrangement & shall be painted with one coat of primer & two coat of finished stove

enamelled post office red colour paint & "FIRE HOSE" written on front.

242 MR Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe

150 nominal to IS (class

C) i/c fittings like elbows, tees, flanges, tapers, nuts Metre 200.00 3106.88 621376.00

b 80 nominal bore (class C) Metre 80.00 1276.80 102144.00

Supply and installation of Butterfly Valves of rating PN 1.6 with mating flanges

generally as specified all complete.

a 150 nominal bore Each 2.00 11335.52 22671.04

NBCC 59 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

b 100 nominal bore Each 4.00 8439.20 33756.80

c 80 nominal bore Each 2.00 6320.16 12640.32

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of

244 MR cubical construction, floor mounted type, fabricated out of 2mm thick CRCA

sheet, compartmentalised with hinged lockable doors, dust and vermin proof,

powder coated of approved shade after 7 tank treatment process, cable alley, inter-

connection with suitable size copper conductor cable/solid copper strip,

having switchgears and accessories, mountings and internal wiring, earth

terminals, numbering etc. complete in all respect, suitable for main fire

pump, pressurisation pump & diesel pump set complete as per CPWD Set 1.00 504000.00 504000.00

specification with following in coming and Outgoings, suitable for operation on

415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as

630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating

Digital Voltmeter 0-500V with selector switch

Ammeter (0-630 A) with selector swtich & CTs etc.

LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps

Set of Copper Bus Bar 800Amps

(Note : All outgoing feeders for pumps should have digital Ammeter with

selector switches, and LED type ON, OFF, trip indicating lamps)

200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta

starter suitable for 75 hp pump with overload protection, current sensing type

single phase preventor complete with all acceessories and internal wiring

required for automatic operation, selector switch for local/remote,

auto/manual/OFF operation. - 2 sets

100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic

Star/Delta starter with overload protection, current sensing type single phase

preventor complete with all acceessories and internal wiring required for

automatic operation, selector switch for local/remote, auto/manual/OFF

operation. - 2 sets

NBCC 60 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Diesel Engine Control

Control for diesel engine comprising -

Automatic/Manual selctor switch & 3 attempts starting device, timers and

relays as required, push buttons, start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine

Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch,

0-30 V DC volt meter, and 0

20 A DC Ammeter

All standard relays and accessories for automatic operation of diesel engine

System Controller

Designing, Supply, Installation, Testing and commissioning of system

controller to control operation of main electric fire pump, diesel pump, Pressurization

pump, Terrace pump in sequence as per specification consisting of relays,

timers. Sensors, annunciation window for fault indication, complete as

per specification

Providing & fixing 150 mm diameter M.S. Class 'C' diesel pump exhaust pipe

includings all fittings, like bends, tees etc. clamps / structural steel supports. The

pipe shall be provided with 75mm thick fiberglass insulation & covering the insulation

with 500 g polythene sheet giving proper overlaps & sealing the joints with suitable

adhesive compound. The pipe shall be provided with 24 gauge aluminium sheet

TOTAL FIRE FIGHTING WORK 4896636.64

D ELECTRICAL WORKS

i INTERNAL AND EXTERNAL ELECTRICAL WORKS

SUB HEAD (I) :- INTERNAL WIRING

CONDUIT (STEEL & PVC) AND ACCESSORIES

246 1224 20 mm Isi marked PVC conduit (1.6 mm thick) Metre 1800.00 10.68 19232.64

247 1225 25 mm Isi marked PVC conduit (1.6 mm thick) Metre 1200.00 15.00 17996.16

248 1225 32 mm Isi marked PVC conduit (1.6 mm thick) Metre 350.00 20.85 7299.04

NBCC 61 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

250 1230 25 mm PVC bend (1.6 mm thick) Each 22.00 2.69 59.14

251 1231 32 mm PVC bend (1.6 mm thick) Each 10.00 6.29 62.94

252 1234 20 mm PVC coupler (1.6 mm thick) Each 46.00 1.78 81.92

253 1235 25 mm PVC coupler (1.6 mm thick) Each 24.00 2.52 60.48

254 1236 32 mm PVC coupler (1.6 mm thick) Each 20.00 3.61 72.13

METAL BOXES G.l. PIPE AND ACCESSORIES

255 1301 Modular G.l. box for 2 moudle 18 SWG Each 726.00 19.53 14180.81

256 1302 Modular G.l. box for 4 moudle 18 SWG Each 789.00 25.61 20209.76

257 1303 Modular G.l. box for 6 moudle 18 SWG Each 1630.00 41.68 67930.58

258 1304 Modular G.l. box for 8 moudle 18 SWG Each 550.00 46.88 25785.76

259 1305 Modular G.l. box for 12 moudle 18 SWG Each 450.00 64.24 28909.44

ELECTRICAL FITTING AND ACCESSORIES

260 1402 S.P. 5/6 amps, one way moduler switch, ISI marked Each 42.00 77.27 3245.29

261 1404 S.P. 15/16 amps, one way moduler switch, ISI marked Each 495.00 121.55 60169.03

262 1405 3 pin 5/6 amps, moduler socket, ISI marked Each 42.00 82.48 3464.03

263 1406 6 pin 15/16 amps, moduler socket, ISI marked Each 495.00 167.56 82943.78

264 1407 Modular Bell push Isi marked Each 10.00 102.45 1024.46

265 1408 Stepped type modular fan regulator Each 33.00 243.10 8022.17

266 1411 modular blanking plate Each 550.00 19.10 10502.80

267 1421 Modular base & cover for 1 module Each 560.00 67.73 37926.78

268 1422 Modular base & cover for 2 module Each 33.00 99.85 3294.98

269 1423 Modular base & cover for 4 module Each 537.00 138.91 74596.60

270 1424 Modular base & cover for 6 module Each 550.00 178.85 98369.04

271 1426 Modular base & cover for 12 module Each 450.00 303.88 136745.28

272 1442 Batten / Angle holder ISI marked (Bakelite / Brass) Each 100.00 12.15 1215.20

273 1444 Call bell / buzzar DC / AC single ISI marked Each 10.00 71.20 711.98

SWITCH DISCONNECTOR, SFU AND MCCB

282 1617 4 Pole MCCB, with adjustable thermal setting 315 A, 35KA Each 6.00 14342.94 86057.66

NBCC 62 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

283 1618 4 Pole MCCB, with adjustable thermal setting 400 A, 35KA Each 6.00 14342.94 86057.66

284 1619 4 Pole MCCB, with adjustable thermal setting 500 A, 35KA Each 3.00 14342.94 43028.83

MCBs, MCB DBS, RCCBs

285 1706 6 amp to 32 amp rating SP MCB, "C" series, 10 KA breaking capacity Each 382.00 90.29 34492.46

1707 6 amp to 32 amp rating SPN MCB, "C" series, 10 KA

breaking capacity

287 1708 6 amp to 32 amp rating DP MCB, "C" series, 10 KA breakingcapacity Each 5.00 308.21 1541.06

288 1709 6 amp to 32 amp rating TP MCB, "C" series, 10 KA breaking capacity Each 50.00 390.70 19535.04

289 1712 40 amp 2 pole isplator Each 2.00 218.79 437.58

290 1713 63 amp 2 pole isolator Each 2.00 273.49 546.99

291 1714 40 amp 4 pole isolator Each 2.00 492.27 984.55

292 1715 63 amp 4 pole isolator Each 2.00 515.73 1031.45

293 1716 100 amp 4 pole isolator Each 2.00 768.38 1536.75

1730 20 amp SPN, industrial type socket outlet, with plug top and metal chained cover in

sheet steel enclosure

299 1738 4 way, SPN double door, MCB DB Each 1.00 942.02 942.02

300 1739 8 way, SPN double door, MCB DB Each 1.00 1354.42 1354.42

301 1740 12 way, SPN double door, MCB DB Each 1.00 1614.88 1614.88

302 1741 16 way, SPN double door, MCB DB Each 1.00 1823.26 1823.26

303 1755 4 way (4 + 12) way, TPN, MCB DB double door horinzonta type Each 1.00 1864.93 1864.93

304 1756 6 way (6 + 18) way, TPN, MCB DB double door horinzonta type Each 7.00 2192.24 15345.70

305 1757 8 way (8 + 24) way, TPN, MCB DB double door horinzonta type Each 7.00 2375.44 16628.09

306 1758 12 way (12 + 36) way, TPN, MCB DB double door horinzontal type Each 1.00 3070.88 3070.88

EARTHING, LIGHTENING CONDUCTOR AND ACCESSORIES

310 2102 Brass compression gland for 2x10 sq.mm 1.1 KV grade cable Set 12.00 29.52 354.28

311 2120 Brass compression gland for 3 1/2 x 25 sq.mm 1.1 KV gradecable Set 28.00 65.12 1823.27

312 2122 Brass compression gland for 3 1/2 x 50 sq.mm 1.1 KV grade cable Set 32.00 65.12 2083.74

313 2123 Brass compression gland for 3 1/2 x 70 sq.mm 1.1 KV grade cable Set 22.00 96.38 2120.27

NBCC 63 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

314 2124 Brass compression gland for 3 1/2 x 95 sq.mm 1.1 KV grade cable Set 18.00 96.38 1734.77

315 2125 Brass compression gland for 3 1/2 x 120 sq.mm 1.1 KV grade cable Set 6.00 123.29 739.74

316 2126 Brass compression gland for 3 1/2 x 150 sq.mm 1.1 KV grade cable Set 18.00 163.23 2938.12

317 2127 Brass compression gland for 3 1/2 x 185 sq.mm 1.1 KV grade cable Set 18.00 193.61 3485.06

318 2129 Brass compression gland for 3 1/2 x 240 sq.mm 1.1 KV grade cable Set 22.00 230.08 5061.80

319 2130 Brass compression gland for 3 1/2 x 300 sq.mm 1.1 KV grade cable Set 30.00 230.08 6902.45

320 2131 Brass compression gland for 4 x 10 sq.mm 1.1 KV grade cable Set 28.00 50.36 1409.95

321 2132 Brass compression gland for 4 x 16 sq.mm 1.1 KV grade cable Set 24.00 65.12 1562.80

322 2201 Alluminium lugs for 6 sq.mm cable Each 6.00 1.30 7.80

323 2202 Alluminium lugs for 10 sq.mm cable Each 240.00 1.74 416.64

324 2203 Alluminium lugs for 16 sq.mm cable Each 144.00 1.74 249.98

325 2204 Alluminium lugs for 25 sq.mm cable Each 168.00 2.61 438.41

326 2206 Alluminium lugs for 50 sq.mm cable Each 192.00 4.77 916.07

327 2207 Alluminium lugs for 70 sq.mm cable Each 72.00 6.94 499.97

328 2208 Alluminium lugs for 95 sq.mm cable Each 84.00 7.82 656.68

329 2209 Alluminium lugs for 120 sq.mm cable Each 12.00 10.42 124.99

330 2210 Alluminium lugs for 150 sq.mm cable Each 72.00 13.89 999.94

331 2211 Alluminium lugs for 185 sq.mm cable Each 60.00 17.36 1041.60

332 2213 Alluminium lugs for 240 sq.mm cable Each 24.00 29.52 708.56

333 2214 Alluminium lugs for 300 sq.mm cable Each 180.00 41.68 7501.54

334 2216 Alluminium ferrules for 6 sq.mm cable Each 0.87

335 2217 Alluminium ferrules for 10 sq.mm cable Each 240.00 1.30 311.81

336 2218 Alluminium ferrules for 16 sq.mm cable Each 144.00 1.74 249.98

337 2219 Alluminium ferrules for 25 sq.mm cable Each 168.00 2.17 365.03

338 2221 Alluminium ferrules for 50 sq.mm cable Each 192.00 3.47 666.62

339 2222 Alluminium ferrules for 70 sq.mm cable Each 72.00 6.08 437.88

340 2223 Alluminium ferrules for 95 sq.mm cable Each 84.00 6.94 583.30

341 2224 Alluminium ferrules for 120 sq.mm cable Each 12.00 9.12 109.40

342 2225 Alluminium ferrules for 150 sq.mm cable Each 72.00 13.03 937.84

343 2226 Alluminium ferrules for 185 sq.mm cable Each 60.00 16.06 963.65

344 2228 Alluminium ferrules for 240 sq.mm cable Each 24.00 25.18 604.26

345 2229 Alluminium ferrules for 300 sq.mm cable Each 180.00 37.33 6719.33

346 2230 Alluminium ferrules for 400 sq.mm cable Each 49.49

347 2303 Wooden bits and batten Each 60.00 96.97 5818.18

348 2304 Iron Screws 45mmx 6 mm Each 200.00 43.75 8749.44

NBCC 64 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

355 2311 16 mm x 40 mm bolts and nuts with washers Set 10.00 700.00 7000.00

356 2312 16 mm x 50 mm bolts and nuts with washers Set 10.00 831.25 8312.53

357 2313 16 mm x 125 mm bolts and nuts with washers Set 10.00 2187.51 21875.06

358 2314 16 mm x 150 mm bolts and nuts with washers Set 10.00 2450.00 24500.00

360 MR internal wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed steel

conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

Group/Loop Control Point wiring in MS conduit, with modular type switch :-

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.

mm FRLS PVC insulated copper conductor single core cable in surface/ recessed

steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Twin Control Point wiring in MS conduit, with modular type switch :-

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

362 conductor single core cable in surface / recessed steel conduit, 2 way modular

switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS

PVC insulated copper conductor single core cable etc. as required.

Power plug wiring in MS conduit (2 x 4 Sq.Mm.) :-

NBCC 65 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

MR single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS Metre 8800.00 255.36 2247168.00

PVC insulated copper conductor single core cable for loop earthing as required.

Circuit / Sub main wiring in MS conduit :-

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

MR FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel

conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. Metre 5120.00 220.64 1129676.80

2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire Metre 300.00 246.40 73920.00

2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire Metre 300.00 409.92 122976.00

2 x 16 sq.mm. + 1 x 6 sq.mm. Earth wire Metre 300.00 534.24 160272.00

4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire Metre 300.00 509.60 152880.00

4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire Metre 340.00 645.12 219340.80

4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire Metre 340.00 910.56 309590.40

II SUB HEAD (II) :- LIGHTNING PROTECTION AND EARTHING

365 MR Supply, installation, testing and commissioning of 8 mm Aluminum Round

Conductor complete as specified in drawing & Meets the requirements of DIN EN

50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305). Only UL certification Metre 2230.00 176.96 394620.80

of Ul listed earthing electrod( Embrossing of the UL number and earthing earthing

electrode dimention must be on the earthing electrode)

366 MR Supply, installation, testing and commissioning of Roof conductor holder for

parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8

Screw to connect the conductor holder. Weather and temperature resistant from -35

to +90 degree Celsius tested. Conductor holder @ 1 meter distance

367 MR Supply, installation, testing and commissioning of Polyamide roof cable holder for

flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost- Each 1000.00 248.64 248640.00

resistant concrete). Sleeve from polyethylene, black @ 1 meter distance.

368 Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305

part-3 16mm rod tapered to 10 mm aluminium rod :Meets the technical specification

according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of

VDE0185/305(IS/IEC 62305)

NBCC 66 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

a MR Supply, installation, testing and commissioning of 4Mtr Airterminal: semi-hard (E-

AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.

b MR Supply, installation, testing and commissioning of 2Mtr Airterminal: semi-hard (E-

AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.

c MR Supply, installation, testing and commissioning of Accessories : System consist of

Fang Fix with base and clamp, on the top air terminal is erected.

369 MR Supply, installation, testing and commissioning of 16 KG stone of 365 mm

diameter, high level of stability Quick and easy mounting of interception rod using Each 28.00 1137.92 31861.76

anchors. Concrete, frost-resistant, can be stacked.

370 MR Supply, installation, testing and commissioning of Fang Fix Junior system -

Inclusive of Al intrception rod of 1Mtr length(10mm dia ) , Quick mounting of the Each 42.00 1102.08 46287.36

interception rod in the base using plug technology.

371 MR Supply, installation, testing and commissioning of cross universal connector: For T

and cross connection, to route vertical down conductor /mesh formation made of hot

dipped galvanised iron with necessary screws etc as required. Installed with 4

hexagonal bolts M8*25 with M8 hexagonal nuts.

372 MR Supply, installation, testing and commissioning of expansion piece with connector:

For equalising temperature related length changes. Necessary on conductors length Each 84.00 329.28 27659.52

over 20 meters. For round conductor Rd 8/ALU.

373 MR Supply, installation, testing and commissioning of Connector: For T cross and

parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot

dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS-

IEC 62305)(2nos/expansion piece ).

374 MR Supply, installation, testing and commissioning of 8 mm Aluminum Round

Conductor complete as specified in drawing & Meets the requirements of DIN EN Metre 1300.00 176.96 230048.00

375 MR Supply, installation, testing and commissioning of Roof conductor holder for

parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8

Screw to connect the conductor holder. Weather and temperature resistant from -35

to +90 degree Celsius tested. Conductor holder @ 1 meter distance

376 MR Supply, installation, testing and commissioning of Test Joint (Folding Clamp) made

of SS, suitable to connect 8mm round conductor and max by 30x3 mm GI strip as Each 40.00 1388.80 55552.00

specified in drawing and directed by Engineer

NBCC 67 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

377 MR Supply, installation, testing and commissioning of Lightnig counter - To count no of

lightning strike & it can record the date and time of the lightning incident also tested Each 2.00 46988.48 93976.96

as per IEC 62561-6.

378 MR Supply, installation, testing and commissioning of Galvanised Steel Flat 30X3 mm

thickness from earth electrode directly in ground as required. Flat conductor shall be

of Hot Dipped & Cross sectional area of 90mm square According to DIN EN 50164-2

(VDE 0185 part 202) Meets the requirement of VDE0185/305(IS-IEC 62305) Zinc

coating: 500 g/m square (Approx :70 micron coating) Should be tested and used

exclusively for lightning protection earthing system and ring equipotential bonding.

CPRI test report shall be submitted for GI earthing electrode (GI earthing electrode

shall be dual pipe technology with 3 mm)

379 MR Supply, installation, testing and commissioning of Cross connector for Flat:

Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate.

380 MR Supply, installation, testing and commissioning of flat conductor holder suitable for

FL 30. Installed with 2 hexagonal bolts.

381 MR Supply, installation, testing and commissioning of Plastic Corrosion Protection strip:

Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric.

382 MR Supply, installation, testing and commissioning of UL Listed & CPRI Tested

maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having Each 60.00 5466.72 328003.20

diameter of 17.2 mm with copper coating thickness of 250micron tested.

383 MR Supply, installation, testing and commissioning of Earth conductivity enhancing

compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested.

384 MR Supply, installation, testing and commissioning of universal clamp made of SS to

connect rod with flat conductor . Earth conductivity enhancing compound shall be of Each 60.00 1187.20 71232.00

25 kg/pit tested as per IEC 62561-7,TCLP tested.

385 MR Supply, installation, testing and commissioning of Heavy duty earth champer of

5000kg load bearing capacity to ensure the safety of earthing system Each 60.00 2587.20 155232.00

III SUB HEAD (III) :- INTERNAL LIGHTING FIXTURES & FANS

NBCC 68 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

LIGHTING FIXTURES & FANS

Supply, installation, testing and commissioning of wall / ceiling / LED light

luminaires with all accessories as per standard item etc complete as required as per

the standard catalogue item approved by consultant. Vendor shall submit Dilaux

design calculation beforte procurement.

a Supply, installation, testing and commissioning of LED Based Wall Mounted light

2ft. In length. with all accessories.

b Supply, installation, testing and commissioning of LED Batten with Advance optical

PC material for excellent and smooth light output, CRI>80, uniform

distribution,lumen output should be 2000 - 2200,Lifetime of 50,000 burning

hours@L70, comply to 3KV surge test, Color Temperature should be 5700k ,Power

Factor >.9,THD<10 ,Working Temp -20 to 45D Celsius, LM 79 and LM 80 reports

need to be submitted with all accessories.

c Supply, installation, testing and commissioning of Pendant luminaire Selene,

system power: 35- 40W, luminous flux of luminaire 3500lm, colour temperature of

MR 3000K-5700K, tunable white, 230V constant current driver, 70% of luminous flux Each 29.00 20572.16 596592.64

after 50,000 operating hours; energy efficient LED, diffused, direct light emission,

housing in aluminium, Electronic driver,Protection class I, IP20 Ø = 550 - 750mm.

d Supply, installation, testing and commissioning of Surface mounted LED

downlighter (round shape) with lumen output minimium 1500 lumens, CRI>80,power

consumption 10-15W max. , with Electronic Driver, Color temperature option of

6500K with all accessories

e Supply, installation, testing and commissioning of LED Based LED Bulkhead with

High Pressure Die Cast Aluminium Body provided with Polycarbonate cover, System

Lumen Package of 600 lm and a maximum System Wattage of 10 Watts, Ingress

MR Protection Rating of IP66 and IK Rating of IK09, Operating Voltage Range of 120- Each 10.00 1034.88 10348.80

277V AC, LM 79 and LM 80 reports need to be submitted from NABL accredited

lab to verify above parameters with all accessories of approved makes and as per

NBCC 69 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

f Supply, installation, testing and commissioning of LED Recessed Downlighter with

a nominal system lumen output of 1320 lumens and a minimum system efficacy of

110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours

at L70. The luminaire should have a color temperature of 5700K and CRI>80. The

MR luminaire shall meet IP20 rating with THD<10% and PF > 0.9. The luminaire housing Each 1400.00 1279.04 1790656.00

should made of pressure die cast aluminium and the luminaire optics shall have a

high efficiency diffuser with more than 85% transmittance. The total power

consumption should not exceed 12W (including DALI driver). LM 79 and LM 80

reports to be submitted with all accessories

g Supply, installation, testing and commissioning of LED Recessed Downlighter with

a nominal system lumen output of 1980 lumens and a minimum system efficacy of

110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours

at L70. The luminaire should have a color temperature of 5700K and CRI>80. The

MR luminaire shall meet IP20 rating with THD<10% and PF > 0.9. The luminaire housing Each 54.00 754.88 40763.52

should made of pressure die cast aluminium and the luminaire optics shall have a

high efficiency diffuser with more than 85% transmittance. The total power

consumption should not exceed 12W (including DALI driver). LM 79 and LM 80

reports to be submitted with all accessories of approved makes and as per design.

h Supply, installation, testing and commissioning of Indoor 15W LED Flexible Strip

Light(5 Mtr) with driver of approved makes and as per design.

i Supply, installation, testing and commissioning of Recessed mounted 2 x 2 LED

Luminaire with high efficiency opal diffuser. Harmonious light effect due to

homogeneously illuminated light emission. System Lumen Package of 3600 lm,

System wattage of 30 Watts, System Efficacy >120 lm/Watts, Color Rendering Index

Ra >80, Color Temperature & 5700K. Inbuilt electronic Driver with Power Factor >

0.9, Total Harmonic Distortion <10%, Dali dimmable and in compliance to IEC Safety

Standards. LM 79 and LM 80 reports to be submitted with all accessories of

approved makes and as per design.

NBCC 70 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

j Supply, installation, testing & commissioning of Pendent HE-High Efficiency LED

system power 28W, luminous flux of luminaire 3200lm, colour temperature of 4000K,

CRI>80, 230V constant current driver, 70% of luminous flux after 50,000 operating

hours, energy efficient LEDs, direct light emission, luminaire profile powder coated in

Extruded Aluminium White, PMMA Opal diffuser for a homogenous light distribution,

internal wiring, With DALI Dimmable Driver, sliding fixing wire suspension. Protection

class I, IP20, Approx dimensions (L=1200 mm, B = 52 mm) with all supporting

accessiories complete of approved makes and as per design.

k Supply, installation, testing & commissioning of Pendent HE-High Efficiency LED

system power 28W, luminous flux of luminaire 3200lm, colour temperature of 4000K,

CRI>80, 230V constant current driver, 70% of luminous flux after 50,000 operating

hours, energy efficient LEDs, direct light emission, luminaire profile powder coated in

Extruded Aluminium White, PMMA Opal diffuser for a homogenous light distribution,

internal wiring, With DALI Dimmable Driver, sliding fixing wire suspension. Protection

class I, IP20, Approx dimensions (L=1200 mm, B = 52 mm) with all supporting

accessiories complete of approved makes and as per design.

l Supply, installation, testing and commissioning of LED 28 Watt Recessed Linear

light 1200mm with high efficiency diffuser. Harmonious light effect due to

homogeneously illuminated light emission. System Lumen Package of minimum

3200 lm, System wattage of 20 Watts, System Efficacy >110 lm/Watts, Color

Rendering Index Ra>80, Color Temperature & 5700K. With DALI Dimmable Driver

with Power Factor > 0.9, Total Harmonic Distortion <10% and in compliance to IEC

Safety Standards. LM 79 and LM 80 reports to be submitted with all accessories of

approved makes and as per design.

m Supply, installation, testing and commissioning of LED Recessed directional

spotlight with LED system power: 8-10W, luminous flux of luminaire 900lm, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours; energy

MR efficient LEDs, colour temperature of 4000K, neutral white, direct light emission, Each 138.00 1826.72 252087.36

luminaire part adjustable, polyester powder coat applied over a 5-stage pre-

treatment, electronic control gear, Protection class II, IP20 DA(ø) = 85mm, of

approved makes and as per design.

NBCC 71 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

n Supply, installation, testing and commissioning of 15-20w of approved makes and

o Supply, installation, testing & commissioning of 15-20w track of approved makes and

p Supply, installation, testing and commissioning of Aviation obstruction light with

MR LED lamp, toughened clear glass, with all accessories as per standard item with all Each 2.00 4783.52 9567.04

SUPPLY OF CEILING & EXHAUST FANS

Supply of AC 230/250 volts, 50 HZ exhaust fan including providing nuts, bolts,

387 MR mounting frame, Louvers shutters and other accessories etc. complete

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star

rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation:

B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,

copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum

388 MR 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), Each 33.00 2587.20 85377.60

THD less than 10%, remote or electronic regulator unit for speed control and all

remaining accessories including safety pin, nut bolts, washers, temperature rise=75

degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50

Hz, single phase AC Supply, earthing etc. complete as required.

Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required

Upto 450 mm sweep Each 2.00 349.44 698.88

IV MISCELLANEOUS ITEMS

Supplying, installation, testing and commissioning of Passive Infrared (PIR)

technology based occupancy sensor having high preformance, non regulating

390 MR programmable type, suitable for connected load upto 10 Amp, for mounting height Each 20.00 4368.00 87360.00

up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing

arrangements i/c programming at site etc. complete as required.

NBCC 72 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Supplying, installation, testing and commissioning of Passive Infrared (PIR)

technology based occupancy sensor having high preformance, non regulating

391 MR programmable type, suitable for connected load upto 10 Amp, for mounting height Each 35.00 6088.32 213091.20

up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing

arrangements i/c programming at site etc. complete as required.

Supplying, installation, testing & commissioning of Astronomical time switch of

following configuration to be mounted in feeder pillars / Lighting DBs for automatic

switching On & Off of street lights at sun set & sun rise or twilight (Auto ON, Auto

Off, Auto modes) with manual override facility with 12/24 hour display format with

suitable battery and indication for relay status i/c programming at site complete as

3 output (1 output per phase) and suitable for three phase supply Each 5.00 8500.80 42504.00

V SUB HEAD (V) :- L.T. PANEL AND DISTRIBUTION BOARD

393 MR MAIN PANEL

Supply, Installation, Testing & Commissioning of Main LT panel, cubicle type, made

out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free

standing, floor mounting, dust and vermin proof, powder coated, indoor,

compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC

system with busbars extendable on both sides, including internal wiring with suitable

size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with

neoprene / PU gasket etc. The panel shall include supply & installation of following

switchgears, metering instruments and accessories as per specification. The panel

shall be suitable for receiving Cable / Bus duct to the incomer ACB. Panel shall have

potential free contacts to interface with BMS.(Panel shall be manufectured in the

premises of Approved make Panel manufecture. Authorise Integrator shall not be

2500A, FP, 50kA, microprocessor based ACB electrical operated, drawout type,

motorised, with overload, instantaneous SC, delayed SC, and ground fault protection

with necessary communication port, shunt trip coil, U/V release etc - 2 nos.

NBCC 73 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

800A, FP, 50kA, microprocessor based ACB electrical operated, drawout type,

motorised, with overload, instantaneous SC, delayed SC, and ground fault protection

with necessary communication port, shunt trip coil, U/V release etc - 2 nos.

Suitable electrical interlock shall be provided between the DG , EB incomers & Bus

couplers to ensure that only one supply is available at a time on each section of bus

and to eliminate any possiblity of both supplies at one bus section.

The panel shall have all neccesary Control cables, Instruments, Relays and

accessories for the auto / manual load sharing logic for 2 nos DG Sets and

satisfactory operation of AMF.

Neccesary provision and control cabling shall be done to trip LT panel incomer on

failure of 33kV HT supply.

2500A, FP, 50kA, ACB electrical operated, drawout type, motorised with out

protection with necessary communication port, shunt trip coil etc - 1 no.

2500 A TPN busbars of high conductivity electrolytic quality copper alloy and

suitable size earthing conductor through out the panel for its earthing.

2A, C curve SP MCB - 4 set

RYB indication lamp, LED type - 4 set

On/Off, Trip indication lamp, LED type - 4 set

(0-500)V voltmeter, Digital type - 4 set

(0-1600)A ammeter, Digital type - 2 set

(0-630)A ammeter, Digital type - 2 set

4 set 3 phase Digital Multi function meter to read V, A, F, kW, PF, kWH, Acc class 1

and with necessary communication port (Backnet/Modbus/RS:485) suited for BMS

Low set earth fault relay using CT of 300/5A 15VA Cl. 5P10 with necessary control

cable from CT at transformer neutral to 51G relay in MSB panel- 2 set

2000/5A 15VA class 1 resin cast CT - 2 set

630/5A 15VA class 1 resin cast CT - 2 set

2000/5A 15VA class 1 resin cast CT for connection to APFC panel - 2 set

NBCC 74 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

1000A FP 50kA MCCB with thermal magnetic release with adjustable OL, SC and

EF protection - 4 no. (2 nos for capacitor, 2 AC)

630A FP 50kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 3 nos. ( 1 Utility panel, 2 spare)

400A FP 50kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 5 nos.(2 Essential Panel, 3 Spare)

200A FP 50kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 5 nos. (2 Essential Panel, 3 Spare)

All outgoings expect capcitor panel shall have 3 phase Digital Multi function meter to

read V, A, F, kW, kWh with Acc class 1 including respective feeder rating CT on the

outgoing feeders

The switchboard shall be partial type tested assembly complete with all inter

connections, risers, internal wiring, labels etc complete as required

394 MR Supply, Installation, Testing & Commissioning of 500 kVAR APFC panel, cubicle

type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42,

free standing, floor mounting, dust and vermin proof, powder coated, indoor,

compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC

system, including internal wiring with suitable size wires, rotary handle, spreaders

3mm thick gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc.

The panel shall include supply & installation of following switchgears, metering

instruments and accessories as per specification. Required nos. of louvers and

panel mounted cooling fans with auto/ manual control shall be provided.

1000A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and

EF protection etc - 1 nos.

1 Set of 1200 Amp TPN busbars of high conductivity electrolytic quality Aluminium

alloy and suitable size earthing conductor through out the panel for its earthing.

1 No 3 phase Digital Multi function meter to read V, A, F with Acc class 1.

1 Set of phase indicating lamps, LED type, RYB.

1 Set of 2A 10kA C curve SP control MCB

1 Set of 800/5A, Class 1.0, 5VA, Cast Resin CT for metering.

NBCC 75 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

1 no. 8 stage APFC relay

7 set On, Off push button

7 set On, Off LED type indication lamp

1 set Auto / manual selector switch.

3 Nos 250A, TPN, 35kA, MCCB with Thermal Magnetic release, having adjustable

OL & SC protection.

2 Nos 100A, TPN, 35kA, MCCB with Thermal Magnetic release, having adjustable

OL & SC protection.

4 Nos 63A, TPN, 35kA, MCCB with Thermal Magnetic release, having adjustable OL

& SC protection.

3 Nos. 100 kVAR MPP heavy duty capacitor with capacitor duty contactor & 7%

detuned harmonic filter.

2 Nos. 50kVAR MPP heavy duty capacitor with capacitor duty contactor & 7%

detuned harmonic filter.

3 No. 25 kVAR MPP heavy duty capacitor with capacitor duty contractor and 7%

detuned harmonic filter.

1 No. 25 kVAR MPP heavy duty capacitor with 7% detuned harmonic filter directly

395 MR Supply, Installation, Testing & Commissioning of Main Lift Panel, cubicle type, made

out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free

standing, floor mounting, dust and vermin proof, powder coated, indoor,

compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC

system, including internal wiring with suitable size wires, rotary handle, spreaders,

3mm thick gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc.

The panel shall include supply & installation of following switchgears, metering

instruments and accessories as per specification.

100A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 1 nos.

1 Set of 160 A TPN busbars of high conductivity electrolytic quality Aluminium alloy

and suitable size earthing conductor through out the panel for its earthing.

NBCC 76 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

2A, C curve SP MCB - 3 nos.

RYB indication lamp, LED type - 3 nos.

1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1.

200/5A 5VA class 1 resin cast CT - 1 set

63 A FP 25 kA MCCB, thermal magnetic having adjustable O/L, SC protection - 5

396 MR Supply, Installation, Testing & Commissioning of Utility Panel-1, cubicle type, made

out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free

standing, floor mounting, dust and vermin proof, powder coated, indoor,

compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC

system, including internal wiring with suitable size wires, rotary handle, spreaders,

3mm thick gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc.

The panel shall include supply & installation of following switchgears, metering

instruments and accessories as per specification.

630A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 1 nos.

1 Set of 650 A TPN busbars of high conductivity electrolytic quality Aluminium alloy

and suitable size earthing conductor through out the panel for its earthing.

2A, C curve SP MCB - 3 nos.

RYB indication lamp, LED type - 3 nos.

1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1.

630/5A 5VA class 1 resin cast CT - 1 set

250A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 2 nos.

160 A 4P 35kA MCCB, thermal magnetic having adjustable O/L, SC protection - 2

100 A 4P 35kA MCCB, thermal magnetic having adjustable O/L, SC protection - 2

NBCC 77 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

397 MR Supply, Installation, Testing & Commissioning of Main UPS Panel-1, cubicle type,

made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free

standing, floor mounting, dust and vermin proof, powder coated, indoor,

compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC

system, including internal wiring with suitable size wires, rotary handle, spreaders,

3mm thick gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc.

The panel shall include supply & installation of following switchgears, metering

instruments and accessories as per specification.

200A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 1 nos.

1 Set of 250 A TPN busbars of high conductivity electrolytic quality Aluminium alloy

and suitable size earthing conductor through out the panel for its earthing.

2A, C curve SP MCB - 3 nos.

RYB indication lamp, LED type - 3 nos.

1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1.

200/5A 5VA class 1 resin cast CT - 1 set

200 A FP 25 kA MCCB, thermal magnetic having adjustable O/L, SC protection - 1

63 A FP 10 kA MCB - 8 nos.

398 MR Supply, Installation, Testing & Commissioning of ESSENTIAL PANEL, cubicle type,

made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free

standing, floor mounting, dust and vermin proof, powder coated, indoor,

compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC

system, including internal wiring with suitable size wires, rotary handle, spreaders,

3mm thick gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc.

The panel shall include supply & installation of following switchgears, metering

instruments and accessories as per specification.

NBCC 78 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

200A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 1 nos.

1 Set of 250 A TPN busbars of high conductivity electrolytic quality Aluminium alloy

and suitable size earthing conductor through out the panel for its earthing.

2A, C curve SP MCB - 3 nos.

RYB indication lamp, LED type - 3 nos.

1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1.

200/5A 5VA class 1 resin cast CT - 1 set

63 A FP 10 kA MCB - 10 nos.

399 MR Supply, Installation, Testing & Commissioning of Main NON-ESSENTIAL PANEL,

cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally

enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated,

indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V,

50Hz AC system, including internal wiring with suitable size wires, rotary handle,

spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket, IS

8623 etc. The panel shall include supply & installation of following switchgears,

metering instruments and accessories as per specification.

400A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 1 nos.

1 Set of 500 A TPN busbars of high conductivity electrolytic quality Aluminium alloy

and suitable size earthing conductor through out the panel for its earthing.

2A, C curve SP MCB - 3 nos.

RYB indication lamp, LED type - 3 nos.

1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1.

400/5A 5VA class 1 resin cast CT - 1 set

NBCC 79 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

100 A FP 35 kA MCCB - 2 nos.

400 MR Supply, Installation, Testing & Commissioning of Street lighting panel, cubicle

type, made out of 2mm thick CRCA sheet, totally enclosed, free standing, floor

mounting, dust and vermin proof, powder coated, outdoor type, compartmentalised,

suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including

internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland

plate, hinged type door with neoprene gasket, IS 8623 etc. The panel shall include

supply & installation of following switchgears, metering instruments and accessories

as per specification.

63A, TPN, switch disconnector unit (Isolator), AC23, 415V, 50Hz, complete with

handle assembly having door interlock - 1 no.

1 Set of 100 A TPN busbars of high conductivity electrolytic quality Aluminium alloy.

2A, C curve SP MCB - 3 nos.

RYB indication lamp, LED type - 3 nos.

1 No 3 phase Digital Multi function meter to read V, A, F Acc class 1.

63/5A 5VA class 1 resin cast CT - 1 set

40A TP+NL C curve MCB - 1 nos.

16A TP+NL C curve MCB - 6 nos.

Necessary space provision and control wiring for satisfactory operation of

Astronimical time switch for automatic switching ON & OFF of street lights.

401 MR Supply, installing, testing and commissioing of following capacity circuit breaker in

sheet steel enclosure for use on 3 phase 4 wire 415 volts, 50Hz AC complete with all

necessary accessories including fixing connectors, spreaders, extended rotory

handle, steel fasteners, connecting to earthing system etc. as required.

200A, TPN, 36kA, thermal magnetic based MCCB with adjustable OL , SC

NBCC 80 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

Providing and fixing following rating and breaking capacity and pole MCCB in

402 existing cubicle panel board, vertical distribution board, tap off box etc including

drilling holes in cubicle panel, making connections, etc. as required.

a MR 125 Amp, 16 KA,FP MCCB Each 2.00 4884.32 9768.64

b MR 200 Amp, 25 KA,FP MCCB Each 2.00 7968.80 15937.60

VI SUB HEAD (VI) :- CABLES AND CABLE TRAY

MR CABLES SUPPLY

1 Supply of ISI marked aluminium conductor FR XLPE insulated cable as per IS 7098,

& cable, armoured, served, sheathed 1100 volts grade.

404 2 Supply of 33kV (E) grade XLPE insulated PVC sheathed compact circular armoured

aluminium conductor HT power cable, insulation screened with extruded semi

conducting compound in combination with copper tape suitable for 33kV earthed

system confirming to relavent standard.

405 MR Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1

KV grade of following size direct in ground including excavation, sand cushioning,

protective covering and refilling the trench etc as required.

b Above 35 sq. mm and upto 95 sq. mm Metre 50.00 325.92 16296.00

c Above 95 sq. mm and upto 185 sq. mm Metre 50.00 339.36 16968.00

d Above 185 sq. mm and upto 400 sq. mm Metre 200.00 380.80 76160.00

NBCC 81 OF 223 ARCH-EN-DESIGN

DEVELOPMENT OF SCIENCE ACADEMY IN PANIKOILI AREA, JAJPUR, ODISHA.

SL.NO. OSR/AR DESCRIPTION OF WORK UNIT QUANTITY RATE (INR)

406 MR Laying of one number additional PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size direct in ground in the same trench in one tier

horizontal formation including excavation, sand cushioning, protective covering but

excluding and refilling the trench etc as required.

b Above 35 sq. mm and upto 95 sq. mm Metre 50.00 227.36 11368.00

c Above 95 sq. mm and upto 185 sq. mm Metre 120.00 241.92 29030.40

d Above 185 sq. mm and upto 400 sq. mm Metre 150.00 283.36 42504.00

407 MR Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1

KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

b Above 35 sq. mm and upto 95 sq. mm Metre 25.00 44.80 1120.00

c Above 95 sq. mm and upto 185 sq. mm Metre 100.00 61.60 6160.00