Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹62 L
EMD Value
₹62,000
Closing Date
4 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Improvements to Dining Hall and JC Hall located beside the Ghatge Convention Centre, HAL Bangalore Including Electrical Works.
8432
TENDER NOTICE/NCP/04/24-25/02
Works
Contract Section Civil-FMD-Bangalore
₹0
₹62,000
4 Sept 2024
13 Jul 2024
13 Jul 2024
4 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Earthwork excavation for laying pipes in Trenches in all soils of depth and width not exceeding 1.50m for laying pipes and getting out including refilling after the work in layers of 20Cms thick, watering, curing, consolidation, shoring, clearing grass, shrubs, stacking, spreading, etc., all complete as directed by Engineer-in-Charge.
Removing / transporting the surplus excavated earth including debris, vegetation waste etc., to a distance exceeding 1500 m but not exceeding 5000m including loading, unloading, depositing, spreading, levelling etc., after obtaining due clearance from the Engineer-in-Charge etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing cement concrete (1:2:4) using 20mm down graded granite aggregate thickness as required including consolidation, curing, formwork, etc., all complete for Plinth, Lintel, Copings, Cills, etc., all complete as directed by Engineer in charge. [Reinforcement shall be paid separately]
Supplying and fixing Precast Reinforced Cement Concrete Lintel of required size as per design & drawings in cement concrete (1:2:4) using 20mm and down graded aggregates, set in cement mortar (1:4) including all exposed surfaces finished uniformly even & smooth including necessary form work, weep / drain holes, mixing, transporting and placing, consolidation, keeping concrete well wetted during the curing period after depositing and protecting it in extreme weather conditions etc., all complete as directed by the Engineer-in-Charge. Note: Reinforcement shall be paid separately.
Brick work with first class table moulded bricks built in cement mortar (1:6) for superstructure at all levels for 230mm thick walls including raking out joints 10mm deep scaffolding, curing, cost of materials, labour, at all heights, etc., all complete as directed by the Engineer-in-Charge. (Brick conforming to IS 1077: Sub Class ‘A’ having compressive strength not less than 35Kgs/ Sq.cms).
Brick work with wire cut bricks built in cement mortar (1:4) including raking out joints 10mm deep scaffolding, curing, cost of materials, labour, at all heights, etc., all complete as directed by the Engineer-in-Charge.
Providing Flush Pointing to brick wall in cement mortar (1:4) including raking out joints 25mm deep, etc., all complete as directed by the Engineer-in-Charge.
Supplying, straightening, fabricating and fixing Steel reinforcement of HYSD TMT Bars of not less than Fe 415 grade conforming to IS 1786-1985 for all concrete reinforcment members / works including cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and erecting in position rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platewith one coat of approved zinc chromate primer, etc., all complete as directed by the Engineer-in-Charge.
Supplying, fabricating and fixing of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including one shop coat primer, etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and fixing of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing of 5mm thick plain sheet Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane, etc., all complete as directed by Engineer-in-Charge.
Same as above but 5mm thick pin headed glass but not exc 0.50Sq m each pane
Providing and Fixing of Mineral Fibre Acoustical Suspended Ceiling System of "Armstrong" or any other approved manufacturer. Product: Armstrong SUPRAFINE 15mm for exposed Grid and OPTRA FG(Micro Look) Edge Tiles. The Tiles shall have a Humidity resistance (RH) not less than 95%, NRC not less than 0.90, Light Reflectance > 88%, Thermal Conductivity k=0.032w/m K, Colour White/Black , as approved by HAL, Fire Performance Class 0/Class1(BS476 Class 6 & 7) in module size of 600x600x15mm/20mm ,suitable for Green Building application ,with recycled content of 88%(FG). (MR+10%)The Grid shall be 15mm wide T-Section Flanges colour white/or other as approved by HAL,having rotary stiching on all T Sections, i.e.the Main Runner ,1200mm & 600mm Cross Tees with a web height of 43mm and a load carrying capacity of 23.71 Kg/Sqm.The T Section shall have a galvanizing of 120g/Sqm and passed through 500 hours of salt test.. Note: The Tile and Grid system together shall carry a 15 Year Warranty.
Supplying and fixing 0.50mm thick galvalume corrugated sheet for semi circle type roofing having a tensile strength of 550mpa as in roof covering fixed with self screws,including etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and fixing of Plain, galvanised, mild steel sheeting of 0.63mm thick , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, etc., all complete as directed by Engineer-in-Charge.
Supplying and laying 10mm thick Vitrified tiles with matt finish (Square / Rectangular) of approved shade (Light colour), pattern, matt finish area of each tile not exceeding 0.36Sq m, in floors and skirting, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of cement mortar (1:4) 20mm thick including chamfering edges, machine cutting, curing, cleaning, etc., all complete as directed by Engineer-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, etc., all complete as directed by Engineer-in-Charge.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of re quired strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, etc., all complete as directed by Engineer-in-Charge.
Painting two coats Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), etc., all complete as directed by Engineer-in-Charge.
Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work, etc., all complete as directed by Engineer-in-Charge.
Painting with two coats of synthetic enamel paint of approved manufacture and colour over existing steel surfaces including preparation of surface with all required scaffolding, etc., all complete as directed by Engineer-in-Charge.
For the new surfaces
Supplying, providing of French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats on the existing surfaces, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing 110mm dia PVC pipes (SWR) for waste water complying with IS 13592 class 'B' of approved manufacture laid in trenches / floors and jointed with rubber ring joints confirming to IS 5382 along with chemical solution, etc., all complete as directed by the Engineer-in-Charge.
same as above but in walls
Supplying and fixing of PVC (SWR) bends any 110mm dia Shoes / bends of any radius, etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing 75mm dia PVC pipes (SWR) for waste water complying with IS 13592 class 'B' of approved manufacture fixed to walls and jointed with rubber ring joints confirming to IS 5382 along with chemical solution including chasing in walls, making bores in walls, etc., all complete as directed by the Engineer-in-Charge.
Removal of Chowkhats or frames exc 1.50Sq m but n exc 4Sq m each and handing over to stores, etc., all complete as directed by Engineer-in-Charge.
Removal of the existing door shutter of size exc 1Sq m but not exc 2Sq m and handing over to stores, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing as per direction of EIC (100X75) mm size II nd class hard wood (Mathi Wood) frame work for door of approved design , frames, rebated on solid, rounded or chamfered, put together with glue pinned at joints.The timber shall be seasoned to a moisture content not more than 12% as per the IS 287 & confirming to IS1141 and treated with anti termite treatment by painting with tar or coal tar black paint (approved make) the ends of posts and back of chowkats complete, including rebating for fixing the shutters, etc., all complete as directed by Engineer- in- charge.(Sample to be got approved before ordering).
Supplying and fixing of 40mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing the following fittings / hardware of approved make and design to door with all required screws, bolts, nuts, washers, etc., all complete as directed by the Engineer-in-Charge.
Aluminium anodised barrel tower bolts 300 mm long made of extruded sections
Aluminium anodised sliding door bolt (Aldrop) 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy
Cold rolled mild steel heavy weight butt hinges 125 mm long conforming to IS 1341
Extruded aluminium alloy handles, fabricated type, anodised 125 mm long
Door closer hydraulically regulated, designation no. 3, universal type with anodised aluminium extruded section body (Anodic coating not less than grade AC 15 as per IS 1868)
Mortice lock of 100mm brass , 4 lever
Floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with over all cover palste of 150mm
Dismantling of framed trusses including necessary cutting and welding of damaged steel members of span exc 10m but not exc 15m, etc., all complete as directed by Engineer-in-Charge.
Demolition of existing Size Stone Masonry / Brick masonry built in cement mortar of any description and at any height including removing out the debris to a distance exceeding 1000m but not exceeding 5000m and depositing away from HAL. The rates including loading, unloading and stacking, etc., all complete as directed by Engineer-in-Charge.
Hacking/Roughening the existing cement concrete flooring by picking and preparing the surface free from dirt, dust, etc., to receive concrete flooring including removing the debries where directed, etc., all complete as directed by Engineer-in-Charge.
Dismantling of Existing of Asbestos cement / FRP / GI / Galvalume (corrugated,semicorrugated, etc.) sheets in roof coverings and stacking of the servicebale materials and handing over to HAL stores, etc., all complete as directed by Engineer-in-Charge.
Taking down Plastering on the existing brick surface or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., all complete as directed by Engineer-in-Charge.
Providing cement Plastering with cement mortar (1:4) 10mm thick on concrete/brick surface finished smooth including curing etc., all complete as directed by the Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description and stacking the dismantled members with in a distance of 100 Rmt, etc., all complete as directed by Engineer-in-Charge.
Only the erection of Steel work in tubular trusses including special shapedwasher etc purlins/ members/ rafters / truss etccomplete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, etc., all complete as directed by Engineer-in-Charge.
Dismantling of wall / ceiling boards ( Fibre / pulp / insulations ) etc or insulation boards / slabs/ balnkets of any thickness including cover filleting and stacking the serviceable materials, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing of fibre insulation boards of 12mm thick including fire retarding type and fixed to timber frame work including necessary scaffoldings and support system with nails, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing of Perforated particle board/ tiles of 12mm thick for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid/ wall frame work to nearest match to the existing wall paneling including necessay scaffolding and support system, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing to Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material of 12mm thick reinforced with cellulose fibre for fixing in 600 mm x 600mm grid to the existing GI frame work and to match to the existing surface finish fo false ceiling, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing white glazed wash hand basin of size (550 X 400)mm and of approved brand and manufacture conforming to IS 2556 (Part IV) with 32mm dia waste coupling, 1 nos of 32mm dia Bottle trap, 1 no of 15mm dia bib tap - one way / two way , 1 no 15mm dia fancy type pilar tap , pVC inlet connection pipe , 1 75 mm dia floor trap inlcuding all other fittings , fixtures , nuts, flange plates and completing the fixing for working condition, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing of Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats and all complete as directed by EIC
Supplying and fixing Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), etc., all complete as directed by Engineer-in-Charge.
Supplying, fixing Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing matching to the requirement of wash basin counter, etc., all complete as directed by Engineer-in-Charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, etc., all complete as directed by Engineer-in-Charge.
Cutting existing water line and jointing with new 40 mm or 50 mm dia CPVC line including threading/ screwing, alterations / additions if any with necessary specials required etc to connect the new line, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing 1000 litres capacity cylindrical vertical rotational moulded polyethylene water storage tank of approved make conforming to IS 12701 moulded to seamless perfection from FDA approved grade polyethylene including necessary cover, inlet, outlet and scour pipe, float valve etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning 25 mm dia CPVC brass tank adaptor conforming to IS 15778 of approved make, jointed together with solvent as required with all necessary tools and tackles etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing of 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, etc., all complete as directed by Engineer-in-Charge.
Supplying, fixing or laying, testing and commissioning the following dia CPVC SDR-11 pipes conforming to IS 15778 of approved make jointed together with solvent on walls/ceiling or in floors including all necessary plain and brass threaded CPVC fittings, clamps, pipe cutting & wastages etc., all complete as directed by the Engineer-in-Charge.
16 mm dia
25 mm dia
32 mm dia
40 mm dia
Supplying and fixing of following traps, etc., all complete as directed by Engineer-in-Charge.
PVC (SWR) floor trap of 75mm dia
PVC (SWR) multi floor trap with grating of 75mm dia
PVC (SWR ) Gully trap PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
Supply, fixing in flush with the false ceiling including suitable fixing arrangment using Chain links, testing & commissioning of recess mounting type square LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥120 lm/watt and lumen output not less than 4320lumens with PF >0.9 and Colour temperature shall be >5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaires & LM80 certificate for LED shall be produced.The LED Light fixture shall be of Bajaj BZRSQL 43L LED XE WH/Equivalent model in other approved makes luminaries which meets the above technical specification complete in all respect and as directed by Engineer-in-charge.
Supply, fixing on existing pole/wall using suitable fixing hardwares testing & commissioning of LED street light fixture minimum of 70watts of Bajaj ENXT P 84L WH or equivalent of HAL approved makes and lumens output not less than 6650 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP65, luminous efficiency ≥ 95lm/w at luminaire level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be >5700K, suitable optics for maximizing the spread(120 degrees approx) complete in all respects and as directed by engineer-in-chage. The luminaire shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.9. LM 79 certification for luminare & LM80 certificate for LED shall be produced.
Supply, fixing on wall/ceiling using suitable MS angle frame work, testing & commissioning of LED flood/focus lighting fixture of wattage not exceeding 120 watts, lumen output not less than 14400 lumens, lumens efficacy ≥ 120lm/w, made out of die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate, including control gear and mounting arrangment. The The Colour temprature of the fitting shall be >5600K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V with power factor of driver unit>0.9. LM79 certification for luminares & LM80 certificate for LED shall be produced. including MS angle & necessary hardwares required has to be supplied with the fitting and other standard accessories complete in all respects and as directed by Engineer incharge. Make/model: Bajaj cat no:PRAZE F 144L WH or equivalent model meeting the above parameter of approved make LED lighting fixtures.
Supply and fixing on existing wall/ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output of 1600 lumens, comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, Other standard accessories including necessary inter-connections , complete in all respects and as directed by engineer-in-chage. The LED tube & batten shall be of Bajaj BLRB DB 118 /Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply and fixing on ceiling testing & commissioning of round type Surface mounted LED downlighter with aluminium die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficiant heat dissipation, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, effficent heat sink, Colour temprature shall be >5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Bajaj make model no:Bajaj BPSLR Surface 18W LED WH RD SD/Equivalent model of approved make luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.
Supply, fixing directly to the wall /wooden wall panel using suitable mounting arrangements testing & commissioning of decorative type LED 12 W wall light including driver, the driver shall have PF >0.9 and Colour temperature shall be =>3000K, rated operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The lighting fixture shall be model no: Pasolite POWL 63 or equivalent make as per approved make list of HAL.
Supply & fixing on existing 20 MM dia 1500mm length GI suspention pipe 1200mm sweep, Ceiling fans including fixing hardwares complete with blades, down rods and accessories etc, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete, erected in position with necessary flexible copper leads of required colour and with canopy, down rod 1500mm length, necessary rubber bushings, clamps nuts,bolts etc., complete in all respects and as directed by Engineer-in-charge.
Point wiring
Wiring to four light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS Fan hook in ceiling whereever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.
Wiring to 6A common socket point controlled by 1 No 6A, 250V gr flush type modular SP switch including 6A 5 pin universal flush type modular socket complete in all respects.
Wiring to 6A, 5pin universal 250V gr. flush type modular Independent socket outlet point controlled by 1 No. 6A 250V gr. Modular type SP switch.complete in all respects.
Wiring to power point consisting of Gang of sockets consisting of 2Nos of 6A, 250V grade, 5pin modular type Universal flush type socket outlet & 2Nos of 6A, 250V grade flush type modular switch of approved colour for control with necessary interconnections complete in all respects.
Wiring to flush type 16A Power socket outlets from the nearest DB in concealed wiring system using suitable size 2mm thick rigid PVC conduit with all conduit accessories such as junction boxes, bends, reducers, clamps, collars, elbows etc., and wiring with 2 runs of 4 Sq.mm for phase and neutral and 1 run of 2.5 sq.mm for earthing FRLS multistranded copper PVC insulated 1100V gr Wire with ISI mark including suitable size modular type MS concealed box with base plate, glossy finish front cover etc., including supply and fixing of universal flush type modular 16A, 250V gr. power socket outlet & 16A, 250V gr. flush type modular SP switch with neon indicator including necessary interconnections, chipping the wall & replastering to smooth finish by using chicken mesh wherever necessary complete in all respects & as directed by Engineer-in-charge.
Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3.5Cx25 Sqmm XLPE insulated Aluminium conductor 1100V gr. Armoured U.G cables complete with all necessary consumables as directed and as per technical specification. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)
Supply and connecting indoor type cable end joints for 3.5Cx25 sqmm LT cable of 1.1KV gr., Aluminum conductor XLPE insulated armoured LT UG cables by employing necessary glands, terminals, bolts & nuts etc., complete in all respects.
Supply & fixing of TPN MCB DB & MCB
4 Way Horizontel type TPN MCB DB
8 Way Horizontel type TPN MCB DB
12 Way Horizontel type TPN MCB DB
63A 415V gr. 4Pole MCB
6-32A, 250V gr. SP MCB
Supply & fixing in flush with the wall/on wall , factory-built powder coated sheet steel enclosed using suitable angle iron frame work, 32A, 415V, 5 pin industrial metal clad socket outlet with plug top, controlled by 1 no. 32A 415V TPN MCB with overload and short circuit releases including necessary interconnections, chipping the wall and replasting to smooth finish wherever necessary complete in all respects and as directed by Engineer in charge.
Supply and fixing of weather proof cable junction box with terminals of size 104 mm x 104 mm x 70 mm Hensel Cat. No. DK 1616 G or equivalent in Legrand/ Schneider/ Hagar make. The Box shall be mounted at suitable height on the pole using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge.
Supply & providing GI earth stations using 600 x 600x 6.3 mm thick G.I plate electrode at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2 runs of 50x6 mm G.I strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender & as per IS 3043 complete in all respects.
Supply and fixing on the wall 8 SWG GI wire complete with necessary interconnections using suitable bolts & nuts to effect proper earth continuity as per standard practice.
Supply & drawing of 2R X 2.5Sqmm + 1R x 2.5Sqmm PVC insulated 1100V gr. multi stranded copper wires with ISI mark with FRLS properties in the already existing conduits/PVC casing & caping/trunking with necessary interconnections complete and as directed by Engineer In-charge.
Excavation of cable trench in all types of soil for laying LT cables, refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge.
Supply and fixing on wall/ partition wall using necessary mounting arrangements for 80x50mm size DLP-PVC adaptable trunking system including cover and with separation partition for laying power and Data/Telephone cables/wires with full top cover, necessary accessoires such as end caps, flat angle, T joints, external/internal angle, flat junction, Body joint, cover joint, required cabling accessories etc., complete in all respects as directed by Engineer-in-charge.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN04.pdf
TENDER_DOCUMENT • 2.71 MB
46APQ.pdf
TENDER_DOCUMENT • 0.22 MB
46APB.pdf
TENDER_DOCUMENT • 0.40 MB
TenderDrawind2.pdf
TENDER_DOCUMENT • 0.09 MB
TenderDrawind3.pdf
TENDER_DOCUMENT • 0.09 MB
TenderDrawind4.pdf
TENDER_DOCUMENT • 0.09 MB
46APQF.xlsm
TENDER_DOCUMENT • 0.03 MB
46AUndertaking.pdf
TENDER_DOCUMENT • 0.55 MB
46ATB.pdf
TENDER_DOCUMENT • 2.66 MB
TenderDrawind1.pdf
TENDER_DOCUMENT • 0.13 MB
46APBF1.xlsm
TENDER_DOCUMENT • 0.07 MB
46AECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
46AChecklist.pdf
TENDER_DOCUMENT • 0.34 MB
46Aamd.pdf
TENDER_DOCUMENT • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .