Development of New A site RO at location Within 10 Km From Zero Point Bazar on Kolasib Bairabi Road on NH 6 towards Bairabi District KOLASIB State Mizoram under Silchar DO

Subject: Development of New "A" site RO at location "Within 10 Km From Zero Point Bazar on Kolasib Bairabi Road on NH 6 towards Bairabi", District: KOLASIB, State: Mizoram under Silchar DO. PIN CODE: 796081

Tender Ref. No.: MAC/ERO/37/2025-26/PT-66

e-Tender ID: 2026_ERO_188624_1

Bidder/Firm/Company Name:

Type of Firm (Please Select)

Name of DSC User for the subject Tender:

Son/Daughter of DSC User for the subject Tender:

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER 0

We confirm that we have quoted the rates in the tender considering Inter-alia the 1. Tender Document(s) 2. Additional Document(s) (if any) 3. BOQ Document (Price Bid Format) 4. Corrigendum (if any) 5. Pre Bid Meeting Minutes (if any)

We ………………………………………………………………………………………………………………………… (Name of the Tenderer) hereby certify that we have fully read and thoroughly understood the tender requirements and accept all terms and conditions of the tender including all corrigendum/addendum issued, if any. Our offer is in confirmation to all the terms and conditions of the tender including all corrigendum/addendum, if any and minutes of the pre-bid meeting. In the event of award of contract to us, the complete tender document shall be considered as part & parcel of the LOA/LOI/PO for constitution of Purchase Contract Agreement and also as & wherever applicable & required by IOCL.

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION 0

1 . No insolvency resolution process has commenced (viz. application has been admitted by Adjudicating Authority and moratorium has been imposed and IRP has been appointed) under Insolvency and Bankruptcy Code, 2016 or any other applicable law.

2(a) No insolvency resolution process or liquidation / bankruptcy proceeding is initiated under the Code or any other applicable law (in case where Code is not applicable).

2(b) Insolvency resolution process or liquidation / bankruptcy proceeding has been initiated under the Code or any other applicable law (in case where Code is not applicable) but application has neither been admitted by Adjudicating Authority nor moratorium has been imposed nor IRP has been appointed. I/We undertake to bring to the notice of IOCL immediately if such application is admitted by the Adjudicating Authority or moratorium has been imposed or IRP has been appointed. (Attach details of proceedings with technical bid).

3 . I / We undertake to bring to the notice of IOCL immediately if any proceedings under Insolvency and Bankruptcy Code, 2016 or any other applicable law are initiated or filed at any stage of evaluation of the tender.

4 . I / We are aware that we are not eligible to submit bid or our bid is liable to be cancelled in the event any insolvency resolution process has commenced (viz. application has been admitted by Adjudicating Authority and moratorium has been imposed and IRP has been appointed).

It is understood that if this declaration is found to be false, Indian Oil Corporation Ltd. shall have the right to reject my/our bid & forfeit the EMD / invoke BSD clauses and, if the bid has resulted in a contract, the contract will be liable for termination without prejudice to any other right or remedy (including blacklisting or holiday listing) available to Indian Oil Corporation Ltd.

ANNEXURE – C COMPLIANCE CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA 0

(A) The bidder, ………………………………………………………………………………………………………………………… is not from a country which shares a land border with India;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and are registered with the Competent Authority. Certificate of registration is attached with the bid;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and Government of India has extended lines of credit or is engaged in developmental projects in this country, ………………………………………………………………………………………………………… (Name of the Country) and hence do not require any separate registration for participation in this tender.

(B) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached).

(C) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not sub-contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached].

ANNEXURE – D UNDERTAKINGS AND DECLARATIONS FOR NON TAMPERING OF DATA 0

• I/We have not tampered or modified the subject tender document in any manner and before uploading, same has been cross-checked with documents hosted on your e-portal https://iocletenders.nic.in. In case, if same is found to be tampered/modified, I/We understand that my/our tender will be summarily rejected and EMD/SD may be forfeited and I am / We are liable to be banned from doing business with and/or prosecuted.

• I/We have not tampered or modified the subject tender document in any manner and before uploading, same has been cross-checked with documents hosted on your e-portal https://iocletenders.nic.in. In case, if same is found to be tampered/modified, I/We understand that my/our tender will be summarily rejected and EMD/SD may be forfeited and I am / We are liable to be banned from doing business with and/or prosecuted.

ANNEXURE – E DECLARATION OF BLACK LISTING / HOLIDAY LISTING 0

I/We are participating in the above referred Tender as:

I/We hereby declare that I/We are participating in the above referred Tender as 'Partnership Firm'

Complete Declaration shall appear here after you select any option from above i.e. 'Proprietary Concern' / 'Partnership Firm' / 'Company'.

Details given below:

It is understood that if this declaration is found to be false, IndianOil Corporation Ltd. shall have the right to reject my/our bid. If the tender has been finalized, the contract will be liable for termination without prejudice to any other right of remedy (including black listing or holiday listing) available to IndianOil Corporation Ltd.

ANNEXURE – F DETAILS OF RELATIONSHIP WITH IOCL’S DIRECTORS ETC. 1

(A) Name of the Tenderer

(B) Organizational Structure

D E C L A R A T I O N - `A'

(1). Residence Address

(2). Office Address

(3). State whether tenderer is related to any Director/(s) of the Indian Oil Corporation Limited

(3.1). If 'Yes' to (C), State the name of IOCL’s Director & Tenderer’s relationship with him/her (e.g. Abcd Efgh (Brother)).

D E C L A R A T I O N - `B'

(2). Name of Partners

Sl. No. Name(s)

(3). State whether any of the partners is a Director to the Indian Oil Corporation Limited

(3.1). If `Yes’ to 3, State the name(s) of IOCL’s Director

Sl. No. Name(s)

(4). State whether any of the partners is related to any of the Director(s) of the Indian Oil Corporation Limited

(4.1). If `Yes’ to 5, State the name(s) of IOCL’s Director & the Concerned partner’s relationship with him/her

Sl. No. Name(s)

D E C L A R A T I O N - `C'

(1). Registered Office Address

(2). Principal Office Address

(3). State whether the Company is Pvt. Ltd. Co. or Public Ltd. Co.

(4). Name of Directors of the Company

(5). State whether any of the Directors of the Tenderer Company is a Director of Indian Oil Corporation Limited

(5.1). If `Yes’ to 3, State the name(s) of IOCL’s Director

Sl. No. Name(s)

(6). State whether any of the Director of the Tenderer Company is related to any of the Director’s of the Indian Oil Corporation Limited

(6.1). If `Yes’ to (7), State the name(s) of IOCL’s Director & the concerned Director’s (of the tenderer Co.) relationship with him/her

Sl. No. Name(s)

D E C L A R A T I O N

I / We have not employed any retired Director and above rank officer of Indian Oil Corporation Ltd in their firm.

I / We have employed retired Director and above rank officer of Indian Oil Corporation Ltd in my/our firm as detailed below

(F) Sl. No. PARTICULARS DETAILS

1 Name of the Person

2 Post last held in IOC

3 Date of Retirement

4 Date of employment in the firm of Tenderer

ANNEXURE – G UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS 0

I/We hereby declare that I/We/M/s.

(A) We hereby confirm that we have not transferred our ownership rights either in whole or in part to another entity or under process of transfer.

I/We have transferred my/our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

I/We are in process of transferring my/ our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

(B) I/We understand that Indian Oil Corporation Limited (IOCL) reserves the right to reject the tender of any entity, which has transferred its ownership rights in whole or in part or which is in process of transfer without assigning any reason for such rejection.

(C) I/ We also understand that refusal or failure to share the information regarding the status of any kind of business transfer process/restructuring etc. in this tender or at any later stage, as applicable, my/our tender is liable to be rejected by IOCL and without prejudice to any other remedy or action available with IOCL, IOCL shall forfeit the Earnest Money Deposit provided by the tenderer, in any form whatsoever.

ANNEXURE – H PARTICULARS OF BIDDER FIRM 0

(A) Name of the Bidders Firm

(B) Type of Firm

(C) Name of Proprietor

Sl. No. Name(s)

(D) Proprietorship Declaration

(E) Details of shareholders of firm holding at least 10% of share capital (Applicable in case of company)

Sl. No. Name(s) Total No of Shares held % of total Voting share Capital

ANNEXURE – I UNDERTAKING ON NO MULTIPLE BIDDING 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare:

I. I/We have not submitted multiple bids. i.e., more than 1 bid either individually or in any combination of person (individual capacity, proprietor, affiliates, partnership, association of persons, Company).

II. I/We am aware that, in case found that such multiple bids are submitted, all such bids are liable for rejection.

Note: The submitted bids shall be considered as multiple bids as explained in "PART - B" of tender document.

ANNEXURE – J UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII) 0

UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII)

I ………………………………………………………………………………, son/daughter of ………………………………………………………………………………, do solemnly affirm and state as under:

(1). That I am the authorized signatory of M/s ……………………………………………………………………………… and I am duly authorized to furnish this undertaking declaration on behalf of M/s ………………………………………………………………………………

(2). That M/s ……………………………………………………………………………… has submitted its bid against bidding document of above Tender reference.

(3). That the Firm/Company is fully aware of the provisions of Public Procurement (Preference to Make in India) (PP-MII), Order 2017 and its amendments.

(4). We hereby confirm that our offer is achieving the minimum local content of:

Minimum 50% (>=50%)

Deemed Class-II Local Supplier (As per Clause 2A of PP-MII Order Revision Dated 19.07.2024. I confirm that we are manufacturing the tendered item under PLI Scheme and have received incentive from concerned PLI ministry. This declaration is being made within the specific time period only, as notified by concerned PLI Ministry)

(5). Details of location(s) where the local value addition is made

(6). I confirm that I am aware of the implication of the above undertaking and our liability on account of wrong declaration.

Note: 1. This undertaking shall be certified by the authorized signatory of the bidder. Authorised signatory shall mean a) The Proprietor in case of a proprietorship firm. b) Any one of the partners having POA in case of a partnership firm. c) Power of Attorney holder in case of a company.

2. Preference is applicable only for suppliers claiming minimum 50 % Local Content.

ANNEXURE – K BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare that in the event:

I / We withdraw / modify our bid during the period of bid validity

I / We commit any other breach of tender conditions / contract which would have otherwise attracted forfeiture of EMD

I / We fail to / refuse to initiate the execution of the awarded Contract as per the terms of the Contract

then I / We could be debarred from being eligible for bidding / award of all future tender(s) of Indian Oil Corporation Limited for a period of SIX Months from the date of communication of such debarment.

Annexure Name Description Submission Status

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER NOT Submitted 0

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION NOT Submitted 0

ANNEXURE – C CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA NOT Submitted 0

ANNEXURE – D UNDERTAKINGS AND DECLARATIONS FOR NON TAMPERING OF DATA NOT Submitted 0

ANNEXURE – E DECLARATION OF BLACK LISTING / HOLIDAY LISTING NOT Submitted 0

ANNEXURE – F DECLARATION "A", "B", "C" & "D" NOT Submitted 0

ANNEXURE – G UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS NOT Submitted 0

ANNEXURE – H PARTICULARS OF BIDDER FIRM NOT Submitted 0

ANNEXURE – I UNDERTAKING ON NO MULTIPLE BIDDING NOT Submitted 0

ANNEXURE – J UNDERTAKING ON PUBLIC PROCUREMENT (PREFERENCE TO MAKE IN INDIA (PP-MII) NOT Submitted 0

ANNEXURE – K BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD NOT Submitted 0

STATEMENT OF CREDENTIAL & BID SUBMISSION CHECKLIST

Tender Ref. No.: MAC/ERO/37/2025-26/PT-66 Tender ID: 2026_ERO_188624_1 Name of Work: Development of New "A" site RO at location "Within 10 Km From Zero Point Bazar on Kolasib Bairabi Road on NH 6 towards Bairabi", District: KOLASIB, State: Mizoram under Silchar DO

Note: 1.Bidders have to submit duly filled Statement of Credentials. Data is to be filled by the Bidders only in WHITE coloured cells. 2. Necessary supporting documents to be enclosed. 3. Corporation reserves the right to assess the bidder’s capacity and capability if necessary by visiting/ inspecting recently executed / under execution of works.

S N Particulars Details Uploaded:

(A) General Information

1 Name of the bidder:

2 Address of the Bidder

3 Login E-Mail id for portal

4 Correspondence E-Mail id as per portal

5 Name of Contact Person:

6 Contact Person's Mobile no -

7 Company details: Type of Firm

8 Copy of PAN card (For Indian bidders / Indian Agents of Foreign Bidders)

9 Copy of GST Registration (For Indian bidders / Indian Agents of Foreign Bidders)

10 Copy of PF registration

11 Partnership deed (For Indian bidders – The deed should be registered with Registrar of Firms)

Certificate of Incorporation with memorandum and articles of Association (as applicable for partnership firms and companies)

1 Earnest Money Deposit Instrument Ref:

(C) PQC Documents

2 Turn Over Criteria (In Rs.)

2.1 FY 2024-25 UDIN no.:

2.2 FY 2023-24 UDIN no.:

2.3 FY 2022-23 UDIN no.:

3 Similar Work: Work completed by the bidder, as main contractor, or as sub-contractor, during last seven years ending last day of month previous to the original end date of bid submission. The value of completed work for evaluation shall be considered as under:

3.1 1st Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

3.2 2nd Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

3.3 3rd Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

(D) OTHER ESSENTIAL COMMERCIAL CRITERIA:

1 Copy of PAN card (For Indian bidders / Indian Agents of Foreign Bidders)

2 Copy of GST Registration (For Indian bidders / Indian Agents of Foreign Bidders)

3 Copy of PF registration

4 Power of Attorney / Authority of the person uploading the bids / Board Resolution along with

a) Certificate of incorporation (COI), Memorandum of Association (MOA) and Articles of Association (AOA) in case of Company. Or

b) Partnership Deed, Or

c) Declaration of sole proprietor

(E) OTHER DOCUMENTS:

1 Acceptance of all terms & conditions of tenderer- Annexure ‘A’ of Technical Bid Part-B.

2 Declaration on Proceedings Under Insolvency and Bankruptcy Code, 2016 (Bidding Stage)- Annexure ‘B’ of Technical Bid Part-B.

3 Compliance Certificate for bidders from a country which shares a land border with India- Annexure ‘C’ of Technical Bid Part-B.

4 Undertakings and declarations for non-tampering of data- Annexure ‘D’ of Technical Bid Part-B.

5 Declaration of blacklisting / holiday listing clearly mentioning the details of Holiday listing or "NIL" in case of no details - Annexure ‘E’ of Technical Bid Part-B.

6 Details on Relationship with IOCL's Directors (Declaration "A", "B", "C" & "D") - Annexure ‘F’ of Technical Bid Part-B.

7 Undertaking for business transaction status of bidders- Annexure ‘G’ of Technical Bid Part-B.

8 Particulars of bidder firm- Annexure ‘H’ of Technical Bid Part-B.

9 Undertaking on no multiple bidding- Annexure ‘I’ of Technical Bid Part-B.

10 Declaration for availing Purchase Preference on purchase preference (PP-MII) policy) – Bid Stage - Annexure ‘J (Part-I)’ of Technical Bid Part-B.

11 Declaration on purchase preference (linked with local content) (PP-MII) policy- Annexure ‘J (Part-II)’ of Technical Bid Part-B.

Percentage BoQ NQ

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par (=) Not Quoted Select Excess (+) Less (-) At Par (=)

Tender Inviting Authority: General Manager I/c (Materials & Contract), Eastern Regional Office

Name of Work: Development of new A site Retail Outlet at location "WITHIN 10 KM FROM ZERO POINT BAZAR ON KOLASIB BAIRABI ROAD ON NH6 TOWARDS BAIRABI", Dist: KOLASIB, State: Mizoram"

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Qty Units Estimated Rate IN Rs. P. Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P GST PERCENT (%) Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 TRANSPORTATION AND INSTALLATION OF 2X20 KL TANKS IN EARTH PIT item_code_1

2 Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever mentioned shall be of grade M20 item_code_2

3 ii) In earth pit with RCC matt raft as per standard Drg. ENG/314 item_code_3 0.000 LS Excess(+) Full Conversion INR

4 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_4 0.000 M2 Excess(+) Full Conversion INR

5 iv) S/L Threaded A/G HD MS Pipes of 40 mm dia with fittings,Painting item_code_5 0.000 M- Excess(+) Full Conversion INR

6 ii) S/L Welded U/G HD MS Pipes of 80mm dia with fittings,doping item_code_6 0.000 M- Excess(+) Full Conversion INR

7 iv) S/L Welded U/G HD MS Pipes of 40mm dia with fittings,doping item_code_7 0.000 M- Excess(+) Full Conversion INR

8 iii) 15/20 KL Tank with fittings : 0 - 30 Km item_code_8 0.000 LS Excess(+) Full Conversion INR

9 iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km item_code_9 0.000 KM Excess(+) Full Conversion INR

10 Chemical Earthing with Copper Bonded Rod suitable for current carrying capacity of 15kA for 1 second - Supply of chemical earthing Cu Bonded High Tensile Low Carbon Steel Rod of dia not less than 17mm electrode complying to UL 467 Requirements & suitable for current carrying capacity of 15kA for 1 second, exothermic welded & 3Mtr long item_code_10 0.000 EA Excess(+) Full Conversion INR

11 ii) 32 x 6 mm G.I.strip item_code_11 0.000 M- Excess(+) Full Conversion INR

12 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_12 0.000 KG Excess(+) Full Conversion INR

13 vii) 1:3:6(1 Cement : 3 Fine Sand : 6 Graded stone aggregate of 40mm) item_code_13 0.000 M3 Excess(+) Full Conversion INR

14 Providing Neat cement punning item_code_14 0.000 M2 Excess(+) Full Conversion INR

15 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_15 0.000 M2 Excess(+) Full Conversion INR

16 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_16 0.000 M2 Excess(+) Full Conversion INR

17 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_17 0.000 M3 Excess(+) Full Conversion INR

18 iii) 32SWG SS wire mesh both sides of existing U vent hood 40mm dia item_code_18 0.000 EA Excess(+) Full Conversion INR

19 iii) Supply & installation of U type CS bend on vent pipe of 40 mm dia item_code_19 0.000 EA Excess(+) Full Conversion INR

20 Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval. item_code_20 0.000 EA Excess(+) Full Conversion INR

21 i) 80 mm dia Aluminium camlock coupling - Male only item_code_21 0.000 EA Excess(+) Full Conversion INR

22 i) 50 x 10mm G.I. Strip item_code_22 0.000 M- Excess(+) Full Conversion INR

23 CONST.OF DU ISLAND, INSTALLATION OF DUs & ALLIED WORKS item_code_23

24 i) All kinds of Soil item_code_24 0.000 M3 Excess(+) Full Conversion INR

25 i) Local Fine Sand within grading zone IV item_code_25 0.000 M3 Excess(+) Full Conversion INR

26 iv) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 40mm) item_code_26 0.999 M3 Excess(+) Full Conversion INR

27 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_27 0.000 M3 Excess(+) Full Conversion INR

28 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_28 0.000 M2 Excess(+) Full Conversion INR

29 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm item_code_29 0.000 M2 Excess(+) Full Conversion INR

30 Supply and Laying of 50 mm dia single wall flexible piping system comprising of Non-metallic HDPE (flexible) pipelines as per IOCL specifications and with manufacturer supplied fittings including all bends, tees, elbows, reducers, end connectors at DU & tank side etc and as required for complete underground piping job. The joints in the pipelines, except the end connections at tanks and dispensers shall be made by electro-fusion welding. The pipes shall be suitable for use with petroleum and ethanol blended fuels. The maximum operating pressure shall be 7Kg/sq.cm. Note: The make of HDPE Pipe should be CCOE approved. Pressure testing shall be done before the final backfilling. The civil works for installation viz. excavation, sand filling & back filling etc. shall be paid seperately. All metallic parts in the piping system shall be grounded as per the requirements of EN14125. item_code_30 0.000 M- Excess(+) Full Conversion INR

31 iii) 3 Core x 1.5 sq. mm. (copper) item_code_31 0.000 M- Excess(+) Full Conversion INR

32 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_32 0.000 M- Excess(+) Full Conversion INR

33 vii) 3 Core x 2.5 sq. mm item_code_33 0.000 EA Excess(+) Full Conversion INR

34 vii) 3 Core x 2.5 sq. mm item_code_34 0.000 EA Excess(+) Full Conversion INR

35 iv) 25 x 6 mm GI strip item_code_35 0.000 M- Excess(+) Full Conversion INR

36 iv) 300 mm dia. R.C.C. pipe item_code_36 0.000 M- Excess(+) Full Conversion INR

37 iii) 6A to 32A DP MCB item_code_37 0.000 EA Excess(+) Full Conversion INR

38 i) 2 product - 4 nozzle MPPs/MPDs item_code_38 0.000 EA Excess(+) Full Conversion INR

39 Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge item_code_39 0.000 EA Excess(+) Full Conversion INR

40 vii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km item_code_40 0.000 LS Excess(+) Full Conversion INR

41 viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km item_code_41 0.000 KM Excess(+) Full Conversion INR

42 xi) MPD/MPP pumps upto 2 nos., 0-30 Km item_code_42 0.000 LS Excess(+) Full Conversion INR

43 xii) MPD/MPP pumps upto 2 nos., Add extra for every additional Km above 30km item_code_43 0.000 KM Excess(+) Full Conversion INR

44 iii) S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping item_code_44 0.000 M- Excess(+) Full Conversion INR

45 iii) S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein item_code_45 0.000 EA Excess(+) Full Conversion INR

46 iii) S/I Screwed type GM Ball Valve of 50 mm dia item_code_46 0.000 EA Excess(+) Full Conversion INR

47 iv) 5KVA stabilizer item_code_47 0.000 EA Excess(+) Full Conversion INR

48 iii) 500VA CVT item_code_48 0.000 EA Excess(+) Full Conversion INR

49 CONSTRUCTION OF BUFFER STRIP item_code_49

50 i) All kinds of Soil item_code_50 0.000 M3 Excess(+) Full Conversion INR

51 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_51 0.000 M2 Excess(+) Full Conversion INR

52 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_52 0.999 M3 Excess(+) Full Conversion INR

53 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_53 0.000 M2 Excess(+) Full Conversion INR

54 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_54 0.000 M3 Excess(+) Full Conversion INR

55 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_55 0.999 KG Excess(+) Full Conversion INR

56 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_56 0.000 M3 Excess(+) Full Conversion INR

57 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_57 0.000 M2 Excess(+) Full Conversion INR

58 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_58 0.000 M2 Excess(+) Full Conversion INR

59 AIR FACILITY item_code_59

60 i) All kinds of Soil item_code_60 0.000 M3 Excess(+) Full Conversion INR

61 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_61 0.000 M2 Excess(+) Full Conversion INR

62 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_62 0.000 M2 Excess(+) Full Conversion INR

63 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_63 0.000 M3 Excess(+) Full Conversion INR

64 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_64 0.000 KG Excess(+) Full Conversion INR

65 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_65 0.000 M3 Excess(+) Full Conversion INR

66 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_66 0.000 M2 Excess(+) Full Conversion INR

67 i) Local Fine Sand within grading zone IV item_code_67 0.000 M3 Excess(+) Full Conversion INR

68 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_68 0.000 KG Excess(+) Full Conversion INR

69 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_69 0.000 M2 Excess(+) Full Conversion INR

70 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_70 0.000 KG Excess(+) Full Conversion INR

71 iii) 3 Core x 1.5 sq. mm. (copper) item_code_71 0.000 M- Excess(+) Full Conversion INR

72 iii) 6A to 32A DP MCB item_code_72 0.000 EA Excess(+) Full Conversion INR

73 iii) Horizontal air compressor Assembly of 5 HP (160-220 LITRES) including civil works item_code_73 0.000 EA Excess(+) Full Conversion INR

74 Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.) item_code_74 0.000 EA Excess(+) Full Conversion INR

75 UNIPOLE FOUNDATION-GRANITE AND ELECTRICAL WORKS item_code_75

76 xxiv) 3 Core x 2.5 sq. mm Copper Cable XLPE item_code_76 0.000 M- Excess(+) Full Conversion INR

77 vii) 3 Core x 2.5 sq. mm item_code_77 0.000 EA Excess(+) Full Conversion INR

78 Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen item_code_78 0.000 M- Excess(+) Full Conversion INR

79 i) All kinds of Soil item_code_79 0.999 M3 Excess(+) Full Conversion INR

80 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_80 0.999 M3 Excess(+) Full Conversion INR

81 i) Local Fine Sand within grading zone IV item_code_81 0.999 M3 Excess(+) Full Conversion INR

82 vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm) item_code_82 0.000 M3 Excess(+) Full Conversion INR

83 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_83 0.999 M2 Excess(+) Full Conversion INR

84 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_84 0.999 M3 Excess(+) Full Conversion INR

85 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_85 0.199 KG Excess(+) Full Conversion INR

86 iv) 20mm dia x 900mm long with 100 mm dia x 6 mm thick plate item_code_86 0.000 EA Excess(+) Full Conversion INR

87 iv) 25 x 6 mm GI strip item_code_87 0.000 M- Excess(+) Full Conversion INR

88 YARD LIGHTING AND ELECTRIFICATION item_code_88

89 Kisaan Seva Kendra, Standard drawing No. ENG/IOCL/PDIL-3. List of Componets are: (a) 1 No. MCCB (3P+N) of 63 A, 25 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-60A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 63 A, Manually Operated Change over switch suitable for connection of Mains supply and 10 KVA DG Set /5 KW Solar system with required No. of MCCB (63 A ,25 KA, 3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 63A, 25 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/ Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 60/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 100 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 6 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-2 (n) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-3 (o) 6 Nos TP MCB of 16 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL. item_code_89 0.000 EA Excess(+) Full Conversion INR

90 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item_code_90 0.000 M- Excess(+) Full Conversion INR

91 xviii) 3.5 Core x 50 sq. mm item_code_91 0.000 EA Excess(+) Full Conversion INR

92 Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen item_code_92 0.000 M- Excess(+) Full Conversion INR

93 x) 8 S.W.G. Cu. Wire item_code_93 0.000 M- Excess(+) Full Conversion INR

94 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_94 0.999 M3 Excess(+) Full Conversion INR

95 vii) 3 Core x 2.5 sq. mm item_code_95 0.000 EA Excess(+) Full Conversion INR

96 vii) 3 Core x 2.5 sq. mm item_code_96 0.000 EA Excess(+) Full Conversion INR

97 i) All kinds of Soil item_code_97 0.000 M3 Excess(+) Full Conversion INR

98 vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm) item_code_98 0.000 M3 Excess(+) Full Conversion INR

99 i) Foundations,footings,bases of column item_code_99 0.000 M2 Excess(+) Full Conversion INR

100 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_100 0.000 M3 Excess(+) Full Conversion INR

101 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_101 0.000 KG Excess(+) Full Conversion INR

102 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_102 0.000 M2 Excess(+) Full Conversion INR

103 Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item_code_103 0.000 EA Excess(+) Full Conversion INR

104 i) For cables 2.5 to 4 sqmm XLPE / AYFY item_code_104 0.000 EA Excess(+) Full Conversion INR

105 i) S/E of 7 Meter high galvanised Octagonal pole with top 70mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item_code_105 0.000 EA Excess(+) Full Conversion INR

106 ii) S/E of 9 Meter high galvanised Octagonal pole with top 90mm(A/F), bottom 158mm (A/F), made up of 3mm thick plate having a base plate of size 285 x 285 x 16 with double arm 1500mm long bracket arm made up of 48 O.D. pipe with EN grade galvanised foundation bolts & anchor plate on suitable concrete foundation as per standard drawings enclosed herein (Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. Of 250W Metal halide luminaries (on opposite sides) item_code_106 0.000 EA Excess(+) Full Conversion INR

107 i) S/E Arm " L " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge item_code_107 0.000 EA Excess(+) Full Conversion INR

108 ii) "L" Pole item_code_108 0.000 EA Excess(+) Full Conversion INR

109 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_109 0.000 M- Excess(+) Full Conversion INR

110 SALES BUILDING & ELECTRIFICATION item_code_110

111 i) All kinds of Soil item_code_111 0.000 M3 Excess(+) Full Conversion INR

112 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_112 0.000 M3 Excess(+) Full Conversion INR

113 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_113 0.999 M3 Excess(+) Full Conversion INR

114 i) Local Fine Sand within grading zone IV item_code_114 0.000 M3 Excess(+) Full Conversion INR

115 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_115 0.000 M3 Excess(+) Full Conversion INR

116 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. item_code_116 0.000 M2 Excess(+) Full Conversion INR

117 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil item_code_117 0.000 M2 Excess(+) Full Conversion INR

118 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_118 0.000 M3 Excess(+) Full Conversion INR

119 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_119 0.000 M3 Excess(+) Full Conversion INR

120 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_120 0.000 M2 Excess(+) Full Conversion INR

121 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) item_code_121 0.000 M2 Excess(+) Full Conversion INR

122 iv) Lintels, beams plinth beams,girders bressumers and cantilevers item_code_122 0.000 M2 Excess(+) Full Conversion INR

123 v) Columns, Pillars, Piers, Abutments, Posts and Struts. item_code_123 0.000 M2 Excess(+) Full Conversion INR

124 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_124 0.000 KG Excess(+) Full Conversion INR

125 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_125 0.999 M3 Excess(+) Full Conversion INR

126 iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL item_code_126 0.000 M3 Excess(+) Full Conversion INR

127 i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4 item_code_127 0.000 M2 Excess(+) Full Conversion INR

128 iii) Skirting with size of Tiles 60x60Cm in Cement mortar 1:3 item_code_128 0.000 M2 Excess(+) Full Conversion INR

130 ii) 110 mm diameter item_code_130 0.000 M- Excess(+) Full Conversion INR

131 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_131 0.000 M2 Excess(+) Full Conversion INR

132 iii) 15mm Cement plaster of mix 1:4 (1 cement: 4 fine sand) on rough side of half or single brick wall item_code_132 0.999 M2 Excess(+) Full Conversion INR

133 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_133 0.000 M2 Excess(+) Full Conversion INR

134 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_134 0.000 M2 Excess(+) Full Conversion INR

135 Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm item_code_135 0.000 M2 Excess(+) Full Conversion INR

136 i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) item_code_136 0.000 M2 Excess(+) Full Conversion INR

137 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). item_code_137 0.000 M2 Excess(+) Full Conversion INR

138 iii) With float glass panes of 8.0 mm thickness (weight not less than 20kg/sqm) item_code_138 0.000 M2 Excess(+) Full Conversion INR

139 iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) item_code_139 0.000 KG Excess(+) Full Conversion INR

140 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections item_code_140 0.000 KG Excess(+) Full Conversion INR

141 ii) Pre-laminated particle board with decorative lamination on both sides item_code_141 0.000 M2 Excess(+) Full Conversion INR

142 i) 125 mm item_code_142 0.000 EA Excess(+) Full Conversion INR

143 Providing & fixing chrome plated brass100mm mortise latch with one dead bolt with 6 levers & a pair of lever handles with necessary screws etc. complete (best make of approved quality). item_code_143 0.000 EA Excess(+) Full Conversion INR

144 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. item_code_144 0.000 EA Excess(+) Full Conversion INR

145 i) With stainless steel cover plate minimum 1.25 mm thickness item_code_145 0.000 EA Excess(+) Full Conversion INR

146 ii) 200x10 mm item_code_146 0.000 EA Excess(+) Full Conversion INR

147 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover item_code_147 0.000 M2 Excess(+) Full Conversion INR

148 Providing and fixing ball bearing for rolling shutters. item_code_148 0.000 EA Excess(+) Full Conversion INR

149 Providing Neat cement punning item_code_149 0.000 M2 Excess(+) Full Conversion INR

150 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. item_code_150 0.000 M2 Excess(+) Full Conversion INR

151 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. item_code_151 0.000 M2 Excess(+) Full Conversion INR

153 ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap item_code_153 0.000 EA Excess(+) Full Conversion INR

154 i) 100 mm diameter item_code_154 0.000 M- Excess(+) Full Conversion INR

155 i) With Semi rigid pipe of 32 mm dia item_code_155 0.000 EA Excess(+) Full Conversion INR

156 v) 40 mm nominal outer dia Pipes item_code_156 0.000 M- Excess(+) Full Conversion INR

157 iii) 40 mm nominal bore item_code_157 0.000 EA Excess(+) Full Conversion INR

158 ii) 20 mm nominal bore item_code_158 0.000 EA Excess(+) Full Conversion INR

159 i) 100x100 mm size P type with common burnt clay bricks of class Designation 7.5 item_code_159 0.000 EA Excess(+) Full Conversion INR

160 i) W.C. pan with ISI marked white solid plastic seat and lid item_code_160 0.000 EA Excess(+) Full Conversion INR

161 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm item_code_161 0.000 M2 Excess(+) Full Conversion INR

162 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. item_code_162 0.000 EA Excess(+) Full Conversion INR

163 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern item_code_163 0.000 EA Excess(+) Full Conversion INR

164 ii) 9" dia light duty, make Khaitan or equivalent item_code_164 0.000 EA Excess(+) Full Conversion INR

165 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item_code_165 0.000 L- Excess(+) Full Conversion INR

166 xii) Fan Regulator of stepped modular type item_code_166 0.000 EA Excess(+) Full Conversion INR

167 iii) 1200 mm sweep item_code_167 0.000 EA Excess(+) Full Conversion INR

168 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_168 0.000 EA Excess(+) Full Conversion INR

169 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_169 0.000 EA Excess(+) Full Conversion INR

170 iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire item_code_170 0.000 M- Excess(+) Full Conversion INR

171 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_171 0.000 M- Excess(+) Full Conversion INR

172 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire item_code_172 0.000 M- Excess(+) Full Conversion INR

173 i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire item_code_173 0.000 M- Excess(+) Full Conversion INR

174 ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_174 0.000 EA Excess(+) Full Conversion INR

175 iv) 6 module frame item_code_175 0.000 EA Excess(+) Full Conversion INR

176 v) 8 module frame item_code_176 0.000 EA Excess(+) Full Conversion INR

177 vii) 6A Modular Switch item_code_177 0.000 EA Excess(+) Full Conversion INR

178 ix) 6A, 3 Pin Modular Socket item_code_178 0.000 EA Excess(+) Full Conversion INR

179 x) 15 A 6 Pin Modular socket item_code_179 0.000 EA Excess(+) Full Conversion INR

180 SEPTIC TANK item_code_180

181 i) All kinds of Soil item_code_181 0.000 M3 Excess(+) Full Conversion INR

182 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_182 0.000 M3 Excess(+) Full Conversion INR

183 iv) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 40mm) item_code_183 0.000 M3 Excess(+) Full Conversion INR

184 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_184 0.000 KG Excess(+) Full Conversion INR

185 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_185 0.000 M3 Excess(+) Full Conversion INR

186 vii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:3 (1 cement : 3 coarse sand) IN FOUNDATION AND PLINTH item_code_186 0.000 M2 Excess(+) Full Conversion INR

187 i) 12mm Cement plaster of mix 1:4 (1 cement: 4 coarse sand) item_code_187 0.000 M2 Excess(+) Full Conversion INR

188 iii)150 mm dia. pipe item_code_188 0.000 M- Excess(+) Full Conversion INR

189 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 item_code_189 0.000 EA Excess(+) Full Conversion INR

190 MONOLITH FOUNDATION item_code_190

191 i) All kinds of Soil item_code_191 0.000 M3 Excess(+) Full Conversion INR

192 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_192 0.000 M3 Excess(+) Full Conversion INR

193 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_193 0.000 M2 Excess(+) Full Conversion INR

194 i) 1:1:2(1 Cement : 1 Coarse Sand : 2 Graded stone aggregate of 20mm) item_code_194 0.999 M3 Excess(+) Full Conversion INR

195 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_195 0.000 M3 Excess(+) Full Conversion INR

196 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_196 0.000 KG Excess(+) Full Conversion INR

197 v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate item_code_197 0.000 EA Excess(+) Full Conversion INR

198 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_198 0.999 M2 Excess(+) Full Conversion INR

199 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_199 0.999 M3 Excess(+) Full Conversion INR

200 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_200 0.000 M- Excess(+) Full Conversion INR

201 iv) 25 x 6 mm GI strip item_code_201 0.000 M- Excess(+) Full Conversion INR

202 TOILET BLOCK item_code_202

203 i) All kinds of Soil item_code_203 0.000 M3 Excess(+) Full Conversion INR

204 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_204 0.000 M3 Excess(+) Full Conversion INR

205 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_205 0.000 M3 Excess(+) Full Conversion INR

206 i) Local Fine Sand within grading zone IV item_code_206 0.000 M3 Excess(+) Full Conversion INR

207 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_207 0.000 M3 Excess(+) Full Conversion INR

208 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. item_code_208 0.000 M2 Excess(+) Full Conversion INR

209 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil item_code_209 0.000 M2 Excess(+) Full Conversion INR

210 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_210 0.999 M3 Excess(+) Full Conversion INR

211 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_211 0.000 M3 Excess(+) Full Conversion INR

212 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_212 0.999 M2 Excess(+) Full Conversion INR

213 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) item_code_213 0.000 M2 Excess(+) Full Conversion INR

214 iv) Lintels, beams plinth beams,girders bressumers and cantilevers item_code_214 0.000 M2 Excess(+) Full Conversion INR

215 v) Columns, Pillars, Piers, Abutments, Posts and Struts. item_code_215 0.999 M2 Excess(+) Full Conversion INR

216 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_216 0.000 KG Excess(+) Full Conversion INR

217 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_217 0.000 M3 Excess(+) Full Conversion INR

218 iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL item_code_218 0.000 M3 Excess(+) Full Conversion INR

219 Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement item_code_219 0.000 M2 Excess(+) Full Conversion INR

220 Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at 17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete. item_code_220 0.000 M2 Excess(+) Full Conversion INR

221 ii) 110 mm diameter item_code_221 0.000 M- Excess(+) Full Conversion INR

222 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_222 0.000 M2 Excess(+) Full Conversion INR

223 iii) 15mm Cement plaster of mix 1:4 (1 cement: 4 fine sand) on rough side of half or single brick wall item_code_223 0.000 M2 Excess(+) Full Conversion INR

224 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_224 0.000 M2 Excess(+) Full Conversion INR

225 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_225 0.000 M2 Excess(+) Full Conversion INR

226 Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm item_code_226 0.000 M2 Excess(+) Full Conversion INR

227 i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) item_code_227 0.000 M2 Excess(+) Full Conversion INR

228 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). item_code_228 0.000 M2 Excess(+) Full Conversion INR

229 iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) item_code_229 0.000 KG Excess(+) Full Conversion INR

230 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections item_code_230 0.000 KG Excess(+) Full Conversion INR

231 ii) Pre-laminated particle board with decorative lamination on both sides item_code_231 0.000 M2 Excess(+) Full Conversion INR

232 i) 125 mm item_code_232 0.000 EA Excess(+) Full Conversion INR

233 ii) 200x10 mm item_code_233 0.000 EA Excess(+) Full Conversion INR

234 Providing Neat cement punning item_code_234 0.000 M2 Excess(+) Full Conversion INR

235 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. item_code_235 0.000 M2 Excess(+) Full Conversion INR

236 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. item_code_236 0.000 M2 Excess(+) Full Conversion INR

237 ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap item_code_237 0.000 EA Excess(+) Full Conversion INR

238 i) 100 mm diameter item_code_238 0.000 M- Excess(+) Full Conversion INR

239 i) With Semi rigid pipe of 32 mm dia item_code_239 0.000 EA Excess(+) Full Conversion INR

240 v) 40 mm nominal outer dia Pipes item_code_240 0.000 M- Excess(+) Full Conversion INR

241 iii) 40 mm nominal bore item_code_241 0.000 EA Excess(+) Full Conversion INR

242 ii) 20 mm nominal bore item_code_242 0.000 EA Excess(+) Full Conversion INR

243 i) 100x100 mm size P type with common burnt clay bricks of class Designation 7.5 item_code_243 0.000 EA Excess(+) Full Conversion INR

244 i) W.C. pan with ISI marked white solid plastic seat and lid item_code_244 0.000 EA Excess(+) Full Conversion INR

245 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm item_code_245 0.000 M2 Excess(+) Full Conversion INR

246 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. item_code_246 0.000 EA Excess(+) Full Conversion INR

247 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern item_code_247 0.000 EA Excess(+) Full Conversion INR

248 ii) 9" dia light duty, make Khaitan or equivalent item_code_248 0.000 EA Excess(+) Full Conversion INR

249 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item_code_249 0.000 L- Excess(+) Full Conversion INR

250 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_250 0.000 EA Excess(+) Full Conversion INR

251 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_251 0.000 EA Excess(+) Full Conversion INR

252 iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire item_code_252 0.000 M- Excess(+) Full Conversion INR

253 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_253 0.000 M- Excess(+) Full Conversion INR

254 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire item_code_254 0.000 M- Excess(+) Full Conversion INR

255 i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire item_code_255 0.000 M- Excess(+) Full Conversion INR

256 ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_256 0.000 EA Excess(+) Full Conversion INR

257 v) 8 module frame item_code_257 0.000 EA Excess(+) Full Conversion INR

258 vii) 6A Modular Switch item_code_258 0.000 EA Excess(+) Full Conversion INR

259 PAVER BLOCK (900 SQ M) item_code_259

260 i) All kinds of Soil item_code_260 0.000 M3 Excess(+) Full Conversion INR

261 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired item_code_261 0.000 M3 Excess(+) Full Conversion INR

262 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge item_code_262 0.000 M3 Excess(+) Full Conversion INR

263 ii) M40 grade 80 mm thick Plain finish item_code_263 0.000 M2 Excess(+) Full Conversion INR

264 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_264 0.000 M3 Excess(+) Full Conversion INR

265 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_265 0.000 KG Excess(+) Full Conversion INR

266 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_266 0.000 M2 Excess(+) Full Conversion INR

267 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_267 0.000 M3 Excess(+) Full Conversion INR

268 APPROACH (100 SQ M) item_code_268

269 i) All kinds of Soil item_code_269 0.000 M3 Excess(+) Full Conversion INR

270 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired item_code_270 0.000 M3 Excess(+) Full Conversion INR

271 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge item_code_271 0.000 M3 Excess(+) Full Conversion INR

272 ii) M40 grade 80 mm thick Plain finish item_code_272 0.000 M2 Excess(+) Full Conversion INR

273 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_273 0.000 M3 Excess(+) Full Conversion INR

274 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_274 0.000 KG Excess(+) Full Conversion INR

275 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_275 0.000 M2 Excess(+) Full Conversion INR

276 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_276 0.000 M3 Excess(+) Full Conversion INR

277 Culvert item_code_277

278 i) All kinds of Soil item_code_278 0.000 M3 Excess(+) Full Conversion INR

279 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_279 0.000 M3 Excess(+) Full Conversion INR

280 vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm) item_code_280 0.000 M3 Excess(+) Full Conversion INR

281 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_281 0.000 M3 Excess(+) Full Conversion INR

282 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_282 0.000 KG Excess(+) Full Conversion INR

283 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_283 0.000 KG Excess(+) Full Conversion INR

284 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_284 0.000 M3 Excess(+) Full Conversion INR

285 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_285 0.000 M2 Excess(+) Full Conversion INR

286 Providing Neat cement punning item_code_286 0.000 M2 Excess(+) Full Conversion INR

287 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_287 0.000 M2 Excess(+) Full Conversion INR

288 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_288 0.000 M2 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information