WELCOME MAINT / CERTAIN REPAIRS TO OFFR AND JCO/ORS MD ACCN TO B1 AREA OF AGE B/R-II UNDER GE (W) JRC

Amount

M&L preparation of old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, mouds moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed

All as per ser item No 1 above but on ceiling in lieu of wall complete all as specified and as directed

M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying one coat of oil emulsion distemper complete all as specified and as dirceted

M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying two coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment on wall and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old surface of wall by removing greasy spot and and applying one coat of CEMENT BASE PAINTon walls etc complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complee all as specified and as directed

M&L prepartaion of old painted surfaces of steel and iron work of any description over 10 width or girth and applying one coat of synthetic enamel paint comlete all as specified and as dircected by the Engineer-In-Charge

Taking down cement plaster on wall built in cement or cement lime mortar incl raking out joints, hacking for key, scrubbing out with water etc. complete.

M&L 15mm thick rendering on wall in CM 1:4 (up to triple storey)on brick/concrete surface and finishing the surface mixed with WPC @ 3 % by weight of cement and smooth with out using extra cement.(Water proofing compound shall be mixed as per manufactured instruction and paid separatly as per respective items)Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.

Supply only integral water proofing compound.

M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling/chajja etc upto triple storey and finishing the surface even and smooth without using extra cement. Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.

M&L renderig 15mm thick cment mortar 1:6 on other than fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using using extra cment

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash.

M & L Preparation of new surface of wall with Birla putty filling on plastering surface and applying two coat of oil emulsion distemper white or printed on walls.

Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.

Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) or equivalent Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar having maximum tip size 0.039" Step 3: Allow 6-8 hrs time to dry the putty surface. Step 4: Apply second coat of the prepared mixer manually to make to smooth to make the finish even. Step 5: Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge.

Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sannding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.

Providing and applying two coats of premium acrylic smooth exterior paint with silicone additives of required shade(two or more coats applied @ 1.43 kgs /10 sq mtrs over and incl priming coat of exterior primer applied @ 2.20Kg/ diluted with fully automatic airless spray machine of paint application of Asian 0Sqm Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

Roughning for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc.

M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified

M&L for fixing APP based polymeric membrane minimum weighing 3.6kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application

M&L 40mm thick brick tiles laid cement mortar bed 1:6 , 15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

-dittio - but except tiles.

M&L Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.

M & L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, benching rounded or chamfered on edges complete.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete.

M & L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.

Demolition of cement Concrete(unreinforced) of any description and in any position not otherwise specifically provided for (below or above ground level) or as in sunken complete.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation filling & mass concrete as in sunken floor.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND or equivalent water proofing coating on the entire surface of sunken portion all as specified .

M&L for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.

M&L for 25mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in sub floor.

M&L PCC (1;2:4) type B-0 using 12.5mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor/parapet walls, filling back of iron frame and holdfasts etc

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

All as per ser item No 38 above but 1000 ltr capacity complete all as specified and as directed

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore

S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

Refixing only 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

Refixing only 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

S&F in repairs15mm bore cast copper alloy chromium plated fancy type wall mixer tap for cold & hot complete all as specified and directed

S&F 15mm dia bore angle cock two way Cast copper alloy chromium plated, fancy type with long shank & cup all as specified and fixed in repairs.

S&F in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe as specified complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed

S & F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

Supply & fix in repair water closet seat cover, white closed pattern with flat bottm & cover for EWC complete all as specified and as directed

S&F in repair vitreous china wash hand basin (pedastal pattern) white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed

S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed

S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.

S&F in repairs coloured PVC toilet cabinet of size 440x325x120mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.

S & F in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915mmx460mm & bowl size 410mm x330mmx160mm complete all as directed by the Engineer-in-Charge

S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted

S&F as in repair Brass chromium plated shower rose 125mm complete.

S&F 4mm thick superior quality shelves (corner), made of transparent toughened glass, size 30x30cm complete all as specified and as directed.

S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied

S&F stainless steel soap dish complete all as specified

S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed.

S & F towel rack 24 inch CP type with all fittings and fixed to walls complete all as spd.

S&F in repairs Chromium plated grating 100/125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.

S&F epoxy powder coated pelmet rods of mild steel with and including pair of brackets complete fixed as in repair.

S& F 1mm thick Stainless steel hollow curtain rod with brackets and side doom fixed with all necessary drilling/fixing wooden/plastic cleats in wall complete all as specified and directed.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed

M & L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed

All as per ser item No 76 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick

M & L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed

All as per ser item No 78 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick

M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area ofeach tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed

All as per ser item No 80 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick

M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed

M&L for 20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.

S&F in repair PVC floor trap size 75/100mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling plain corrugated asbestos /translucent sheet in roof covering incl redges

S&F Rolled mild steel in joist , channel, angle or tee section fixed independently without connecting plates etc (cut to ordinary length i,e, witin 20mm of the length indicated ) of Fe410W(Gde-E-250)quality Acomplete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified

Dismantling structural steel work including doors, gates, flats and MS round bars but excluding framed truss etc.

S&F Framed work as in doors orgates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening andfixing complete .

M&L for cement concrete 1:2:4 Type C-2 as in foundationns filling and mass concrete all as specified and directed.

Taking chowkhat or frame with shutters (with out out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.

All as per ser item No 92 above but exc 1.5 sqm but ont exc 4 Sqm each

Taking down shutter refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified.

Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified.

S&F steel window 1.25mm thick box type ERW hollow P section of size 60mm x25mm single rebated comprise of gauged skelton shutter ERW size 50mmx20mm and 1.25 mm thick with two openable leaf consisting two Nos sash bars of T- section 20mmx3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window)including following fittings welded to frame shutter:- (a) Hold fast 150mm long of 12mm x3mm made to shape -04 Nos per window. (b)Handle of z section 20mmx25mm, 100mm long - 01 Nos per leaf. (c) MS Tower bolt 150mm long -02Nos per leaf. (d) Z-section 20mmx25mm 100mm long 01 Nos per leaf.(e) MS pintol hinges of size 75mmx12mm-02 Nos per leaf. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Wire mess and painting shall be measured and paid separatly under respective items.

All as per item No 96 and above but window with glazed shutter. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Glass panes and painting shall be measured and paid separatly under respective items.

S&F mild steel work as in as in grill gratings, door frames, gates etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm

S&F 35mm thick locally fabricated Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick.

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick second class hard wood locally fabricated glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I para 8.24(A)

S&F mild steel framed work such as door/cupbd frame, etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified.

M&L PVC 19/20mm cupboard shutter one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

S&F solid PVC door frames of size 50mmx47m made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing

M&L 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

S&F continuous piano hinges mild steel bright finish of flap width 30mm

S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished

M&L Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F 100mm butt hinges, mild steel medium weight cold rolled and fixed

S&F 75mm butt hinges, mild steel medium wt cold rooled and fixed

S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.

S&F 150mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked.

S&F aluminium anodised barrel tower bolt of extruded section of 200mm size

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Supply& Fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane including hacking out old broken glass complete all as directed

S&F Figured glass pin head type glazed with oil putty in squre n-exc 0.5 Sqm in Each pane 4mm thick .

Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified

S&F anodized aluminium frames with powder coating (minimum thickness of powder coating 50 micron) for sliding doors, windows, ventilators etc with one or more rebates including jointing cleat for fixing etc.complete all as specified and specified.

S&F anodised aluminium door shutter with powder coating (minimum thickness of powder coating 50 micron) aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium hinges, snap beading, screws,etc complete all as specified

S&F anodised aluminium window(Sliding or side hung shutter) and ventilator shutters, with powder coating (minimum thickness of powder coating 50 micron) side hung/ sliding type without sash bars, aluminium sections weighing 1.0 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F Sheet glass 5.5 mm thickness, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F anodised aluminium grills (anodised transparent or dyed to required shade according to IS:1868 with anodic coating grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cuttung the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as per requirement and direction of Engineer-in-Charge.

Demolition of brick built in cm including all quoins arches pillars etc.

M & L brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks

M & L brick work with sub class 'B' bricks in CM 1:6, except bricks straight or curved on plan exc 6 mtr nean radius, using old size bricks

M & L for uprooting of trees, grass, bushes etc from brick wall/roof surface/or any other surfaces of building incl dismantling the req brick work/roof tiles/mud concrete etc for uprooting the vegetation etc and make good the same to match with exixting surface with same material or concrete (1:2:4) type B-1 after pouring the chemical (which destroy the growth of vegetation to the place where vegetation removed). The rate shall include for scaffoldingor any other arrangement required during this process upto 10 mtr height complete all as spd.

M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: Welded Mesh to paid separately)

Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.

Demolition and breaking up drain pipes 75 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.

S & F 110 mm PVC (SWR) bends/tee any radius provided with access door.

S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.

S & F 75 mm PVC (SWR) bends/tee any radius provided with access door.

Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw etc including making good disturbed surface to match the existing surface.

Taking down DBs/ Main switch board of any size and making good disturb surface of wall/floor complete all as specified and directed.

Taking down U/S submain wiring of any size and make

M&L for point wiring with PVC insulated, PVC sheathed cable single core stranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) with and including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified. (a) for light/fan/call bell point

All as per Ser item No 141 above but for 5 amps switch socket combination on independent board

All as per Ser item No 141 above but for 5 amps switch socket combination on same board

All as per Ser item No 141 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

M& L for concealed point wiring complete with 4 sq mm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 1100 volt grade drawn through & including PVC conduit, medium grade with accessories like bends, tees, junction boxes etc for power point of AC all as specified including 4 sqmm, FRLS type, copper multistranded cable as earth wire for AC socket

S&F switch piano flush type, 5 amps, 230V AC, single pole, one way.

S&F socket out let 5 amp 5 pin flush type.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type.

S&F Switch piano, flush type single pole, one way 15 Amp.

S&F bell push type 5 Amps.

S&F call bell ding dong AC 230 volts.

S & F for batton holder insulated body including 9W LED bulbs all as specified and directed.

S&F ceiling rose surface type bakelite 65x50mm three terminal.

Supply & fix fan 5 step socket type regulator, electronic type, single phase,heavy duty incl connection complete after dismantling/removing unserviceable regulator all as directed.

M & L for DB's 4 way TPN verticle type with single/three phase outgoing with provision for MCB as incommer 415 volts with 200 Amp rated bus bar.

S&F MCCBs 100 Amps 4 pole, 415 Volts, 16 KA breaking capacity.

S&F DB, SPN 8 Way for MCB, 240 volts with 200 Amps rated bus bar.

S & F for MCB SPN 63 Amps DP 240 V.

M & L for MCB SP 6 to 32 Amp .

M & L for submain wiring two single core 6 sqmm PVC insulated copper FRLS drawn through PVC rigid cancealed conduit and conduit acessaries and 6 sqmm PVC insulated copper wire for continuous earth continity conductor all as specified and directed.

S& F in replacement LED tube set (fitting) 20 W use and through type with internal surge protection device of 4 KV with voltage band 140-280V with LED rod with fixture box type and making electrical connection to ceiling rose all as directed

Supply & fixing in replacement LED Bldg security light fitting 35 Watt including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50 mm 3 core including GI pipe 32mm light grade 0.9 Mtr long bent to L shape in 02 Nos of GI Clamps of size 25x6 mm of length 25mm with nuts, bolts and washers complete complete all as specified and directed.

S & F single pole & neutral enclsore with a two Pin and earth plug and socket complete with one single pole MCB 20 Amps 240 Amps 240 Volt

Supply and fixing LED wall lights fitting , 220V, AC decorative type with stylish transparent Frosted glass design , contemporary sleek design , surface mounted classic wall light including LED bulb white/warm white (yellow) light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F Concealed Rigid non-metallic PVC conduit 25mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

S & F 10W LED Bulk LED fitting and connecting electricity using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed

S & F LED Mirror light 10W connecting electricity using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

J.S. Constructions (BID ID -3145371)