8237/E8

Amount

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/loose soil for foundation of pole, laying of electric cables etc complete all as directed by the Engr-in-Charge.

All as per Item No. 1 here in before but for each additional 1.5m or part thereof in depth beyond the first 1.5 for foundation etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm thick complete all as specified in soft/loose soil and as directed by Engineer-in-Charge.

Removing excavated materials of soil not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.

Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) of suitable depth complete all as directed by Engineer-in-Charge.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Materials and Labour Plain cement concrete type C1 ( 1:3:6, using 20 mm graded crushed stone aggregates) as in coping of pole including necessary form work complete all as specified ad as directed.

Materials and Labour Plain cement concrete type D2 ( 1:4:8, using 40 mm graded crushed stone aggregates) as in foundation of pole including necessary form work complete all as specified ad as directed.

Materials and labour 15mm thick rendering for finishing the exposed concrete surfaces of pole with cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

Supply and erecting steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified, type 410 SP-31, 9 Metre long including two coats of aluminium paint over one coat of red oxide primer including 200mm thick PCC type D2 ( 1:4:8, using 40mm graded crushed stone aggregates) for pole foundation bed complete all as specified and as directed by the Engr-in-Charge. Note:- Rates quoted shall be deemed to be inclusive of following works:- (a) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surface. (b) Material and labour for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamelled paint of apprised shade n exc 5 cm height including numbering of pole all as directed by EIC.

Material and labour Point wiring with PVC insulated and unsheathed FR cable single core multistranded copper conductor 1.5 Sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 Sqmm FR stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for ceilig /exhaust fan/ wall mounted fan/ 3 pin 5 Amps point complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

Material and labour Point wiring with PVC insulated and unsheathed FR cable single core multistranded copper conductor 2.5 Sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 2.5 Sqmm FR stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one Switch socket outlet point 6 pin, 15 Amps complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

Supply & fix Switch piano, flush type, SP, one way, 5/6 Amps 230 Volts, white/ivory finish completye all as specified and as directed.

Supply and fix Switch socket combination multipurpose 2 in 1, 6 pin 15 Amps and one pin 5 Amps 230 volt flush type complete all as specified and as directed.

Supply and fix Ceiling rose surface bakelite three terminals 230 volts complete all as specified and as directed.

Supply and fix Chromium plated connecting pipe of 15mm bore, 450mm long with brass adopters complete all as specified and as directed.

Supply & fix 15mm bore stop cock, cast copper alloy, chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make :Essco Cat Part No.DLX-513A or equivalent make of Prayg / Jaguar.

Supply and fixing Bib cock 15 mm bore cast copper alloy chromium plated with crutch or butterfly handle screwed for iron pipe or for brass ferrule etc complete all as specified and directed. Make- Essco Cat Part No.DLX-511 or equivalent make of Prayg / Jaguar.

Supply and fix Storage type water heater ( Geyser) 15 Ltrs capacity, vertical type, AC single phase, 230 Volts, 50 Hz including holdfasts and wall fasteners complete all as specified and as directed. Make:- Havells cat Part No.GHWASESWH015 or Make:- Venus cat Part No. Lyra 15RX Or Make:- Racold Eterno2 Vertical 15 Ltrs.

Supply and fix Metal exhaust fan300 mm, 1400 RPM, 230 Volts, 50 Hz, single phase complete including louvers and cutting of existing wall to fix the exhaust fan including necessary fixing arrangement and necessary sacffolding and making good the disturbed surfaces as per existing finishes complete all as specified and as directed by Engineer-in-Charge. Make:- Havells Cat Part No. Ventil Air DB or Make:-Bajaj Cat Part No. Supreme DLX 300mm, 1400 RPM, 1 Ph

Supply and fix Ceiling fan 1200mm sweep, 230 Volts, 50 Hz, single phase including fixing of 'S' hook and clamp on roof including grouting plaster work if any complete all as specified and as directed. Make:- Crompton cat Part No.Ultra or make:- Havells Cat Part No. XP 390 or Make:- USHA Cat Part No.Striker Plus Star CF BR/ WH W/O REG.

Supply and fix New generation energy saving and environmental friendly long life LED street light luminaries 45 watt with 50mm dia light grade GI pipe bent to shape of 45º 1.5 m long, made up of pressure die cast aluminium housing with high power LED as lighting source and lens separate driver compartment with IP66 protection complete all as specified and as directed by the Engr-in-Charge. Make:- Century Magik cat Part No. SPSL045W0800 or make:- C&S Cat Part No.INDUS-i/45W

Supply and fix PVC junction box of size 140mm x140mm x 95mm and box should have four terminal of 25 Sqmm and earth terminal along with MCB 6 Amps and fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection complete all as directed by Enginner-in-Charg. Make:-Sintex Cat part No. GSJB 1414 or equivalent model from make:- Hansel.

Supply and fix PVC cable twin core 2.5 Sqmm with multi stranded copper conductor, PVC insulated and sheathed to connect from junction box to street light through pole complete all as specified and as directed.

Supply and fix MCCB, 25-100 Amps, 18 kA, three pole, 415V with thermal and magnetic release complete all as specified and as directed. Make:-L&T Cat Part No. CM90517OODO to CM90517OOKO or equivalent model from make:- ABB / Legrand.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 6 Sqmm 2 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Supply and fix 15 mm bore, steel tubes, galvanised, medium grade with all fittingSupply and fixixed complete to wall and ceiling or laid in floors and cutting of existing pipe, tapping & fixing new pipe etc complete all as specified and directed.

Supply and fix 32 mm bore, steel tubes, galvanised, light grade with all fitting for cable proction on pole, road crossing or ground and in pillars etc complete all as specified and directed.

Supply and fix 20 mm bore, steel tubes, galvanised, light grade with all fitting for cable proction on pole, road crossing or ground and in pillars etc complete all as specified and directed.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strips 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore medium grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed including taking out old unserviceable earth plate with all unserviceable accessories.

Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8mm dia 25mm long hex head screw complete all as specified and as directed including taking down old unserviceable one.

Supply and fix Air termination copper single pointed rod 12 mm dia, 300 mm long complete all as specified and as directed including taking down old unserviceable one.

Supply and fix Aluminium strip of size 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as directed including taking down old unserviceable one.

K.P Construction Co

AUTO ELECTRICALS

VAGIRATHI ENGINEERING COMPANY

DILIP CONSTRUCTION

UNIVERSAL

Tirupati Buildcon Pvt. Ltd.

B G Trading Co.

ARJUN DAS VALECHA