CONSTRUCTION OF SWARGIYA RAM SWARUP DAS MOTHER AND CHILD HOSPITAL AT CHARKHI DADRI IN DISTT. CHARKHI DADRI (PDG. STREET LIGHT AND HIGH MAST LIGHT ONLY)

Amount

Main Switches (HSR 31.12 (a). Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. xiv) Triple pole switch with neutral link 32 amp. 415 Volts Cat-B.

Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

iv) TP MCB 6 amp. to 32 amp.

vi) TPN MCB 6 amp. to 32 amp.

Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21). v) Galvanized iron pipe 40 mm dia on surface.

xiii) Galvanized iron pipe 50 mm dia on flushed.

xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) b) Size 20 mm dia.

xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. c) PVC pipe 65 mm dia.

(Q) Earthing (HSR 31.22). i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Q) Earthing (HSR 31.22). ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

Q) Earthing (HSR 31.22). xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. (HSR 31.25) xl) 16 Sq. mm 4 Core Ard. Cable .

xli) 25 Sq. mm 4 Core Ard. Cable .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26). v) 16 Sq. mm 2 Core Ard. Cable.

xl) 16 Sq. mm 4 Core Ard. Cable .

xli) 25 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28). ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

Street Light (HSR 31.30).IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangements , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections.

Pedestal: Supply and erection of Godrej Almirah type M.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- (HSR 31.33). i) M.S.pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embedded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level.

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCCb and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41). v) 4-way,TP&N (Horizontal)(8+12)

S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work. (HSR .1.48).

Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. Make: Philips./ Bajaj/ surya Roshni/ Skipper/ Volmont/ Vipin ST poles/ Crompton. (HSR 31.68). i) 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm.

Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.67). i) HDPE pipe 63/50 mm outer dia/ inner dia

Supply, installation, Testing and commissioning of 16 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 Nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge. Make: Philips/ Bajaj/ Surya Roshni/ Skipper/ Volmont/ Vipin ST poles/ Crompton. (HSR 31.83). Thickness of Top Section = 3mm (Minimum) Bottom Section -4inni (Minimum) Top Dia = 150mm Bottom Dia = 410mm Thickness of Galvanization = Top = 65micron (Min.) Bottom = 85micron (Min.)

Non Schedule Items: Supply & Erection of Single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge of the work.

Non Schedule Items: Supply and erection of 25 W LED Post lantern new generation energy saving envirmental friendly long life aesthetically desinged with symmetrical light distribution, spen aluminium land scap luminiaries with high power LED as light source with the protection of IP-65 of LHEVBGP7PN 6K 025 (Rubby clear) of Havell's make/ BLPTSP 25 W NW LED of Bajaj make/ LPTH-20- CDL of Crompton make complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work..

Non Schedule Items: S/E of 60 W LED street light fitting <110 Lumens per Watt Philips/ Wipro/ Havell's make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Items: S/E of 120 W LED Flood light luminaries with high power LED > 110 Lumens per Watt Philips / Wipro/ Havells make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. (On Top of the Building)

Non Schedule Items: S/E of 200 W LED Flood light luminaries with high power < LED 100 Lumens per Watt Philips / Havell's / Bajaj / Crompton make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Items: Supply and erection of 63 Amp. 3 Phase automatic time switch of L&T make alongwith contactor of required capacity of L&T/ Indoasian/ C&S make movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

Non Schedule Items: S/E of 0.3 KVA capacity invertor with SMF battery for aviation light in existing panel including the cost of all labour & material for connection and petty material etc. to complete in all respect upto entire satisfaction of the Engineer-in-Charge of the work.make of Invertor -Microtec, Sukam, Luminous Battery make - Exide, Amron

Non Schedule Items: Const. of R.C.C Foundation for 16 Mtr. High Mast Pole of size as per approved / attached drawing including the cost of cement / concerte/ longitudinal MS reinforcement rods with rings/ foundation bolts / Anchor plates & other allied material etc as per approved drawing and design to complete the job. The rates are including the cost of suitable size of digging / boring of pit for excavation of foundation below the ground level and also fixing / installation/ connection/ testing / commissioning/ errection of High mast pole on the foundation with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work.(Detailed Attached).

INFERNO POWER AND SAFETY

Rajesh Electric Works

Chanderpal Construction Company

PS ELECTRIC

Balraj Singh Contractor