CWE/GGN/FT-22/2026-27

M&L for repairs to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal (including supply of road metal) rolling and well ramming surface of road complete all as specified and as directed by the Engineer-in-Charge.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor/ gunny bags to remove all loose dirt including removing material to low lying area from MoD land etc applying evenly priming/tack coat with paving bitumen of VG-10 grade at penetration at 5 Kg per Sqm complete all as specified and as directed by Engineer in charge

M&L bituminous premixed semi dense bituminous concrete 30 mm consolidated thickness using paving bitumen (VG-30) 5.5% binder content and filler by weight of total mix as per design mix, spread by means of self propelled mechanically spreader/paver, rolled and compacted to required camber and gradient complete , by using mechanically power road roller 8 to 12 tonne capacity all as specified. NOTE: (i) The mix design shall be carried out only in SeMT wing / Govt approved lab/National test House/Engineering College as approved by the GE before commencement of work. (ii) As a result of job mix formula, if quantity of binder content works out to be more than 5.5% than no extra payment shall be made to the contractor and in case its quantity works out be less than 5.5% than minimum binder content of 5.5% givne herein above shall be provided. (c) The premix semi-dense asphltic concrete shall be procured form computerized hot mix plant as approved by GE. (iii) Thickness of semi dense asphaltic concrete and qualities of materials as mentioned in particular specification /SSR are the minimum. The quoted rate shall also be deemed to include for provsion of more materials in comparison to those mentioned/ specified in the item, if shape all as directed by the GE. (iv) Hot mix plant of adequate capacity shall be used for heating and mixing stone and fine aggregate and binder (nitumen) and semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. The vintage of sensor paver shall not be more than 05 years. (iv) Contractor's quoted rates shall be deemed to include all these aspects.

S&F in repair road safety convex mirror made up of Polycarbonate reflective with hood for road turning, intersection, curve, T junction etc, unbreakable and strong, mounted on and body made of ABS /Fibre/Plastic of size 100 cm dia fixed over and inclduing 40mm bore MS pipe of 2.40 meter length duly powder coated, fixed with adjustable clamp, pole fixed with plain cement concrete 1:2:4 type B1 (using 20mm grade crushed stone agrregate) block of size 450x450x450 mm deep including necessary excavation & earthwork etc complete all as specified and directed. Note : (a) A mild steel base plate of size 250mmx250mmx3mm shall be welded at bottom of pole. (ii) All sheet & iron surface other than powder coated shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide zinc chrome primer. complete all as specified and directed.

S&F for applying 2 mm thick thermoplastic paint compound on black top surface or existing painted surface applied hot mixing plant of heating plastic material to a standard temprature with gas and laying standard thickness of approx 2 mm by using thermo plastic material @ 6.5 Kg/Sqm and glass beads @ 250 Gms/Sqm complete all as specified and directed

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and as directed.

S&F Cat Eyes solar reflective type of aluminium alloy body solid of size 100 x 100 x 20 mm with PAMA striplers reflectors fixed on the road by using and incl MS stud of suitable size model No DA-972 as per manufacturer instructions complete all as specified and directed.

Taking down old unsv road furniture ie cat eye/solar reflector delinator complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any floors and paving not exc 15 cm thick (above or below ground level) complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in sub base to floors etc complete all as specified and directed.