Replacing of AC / GI Sheet Roofing including Accessories with Galvalume Roof Sheets and its Accessories along with Associated Civil Works for the Hangars / Shops / Stores / Sheds in Aircraft Division/ HAL BC.

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

TIN number

PAN no and Name of Holder

PF number (If any)

ESI number

Service Tax Registration No

Goods and Service Tax ID No.

SAC Code

Contact details

Registered Contractor

Pls Enter

Need to Fill Column 19

Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

Pls enter Finiancial Turnover in Rupees for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Name of Organization with address

Balance Work On Hand

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Quantity of work Excuted during the last three years

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Bank Statement for past three month

Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

#VALUE!

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

You are Not Eligible

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

work done

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

#VALUE!

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

DECLARATION

Pls enter

Tender Document Cost and EMD details

Enclosed / Not enclosed

Enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

Specification

Dismantling Aesbestos cement roofing including ridges, hips, valleys, gutters, etc., and stacking the material within 50 metres lead of any serviceable material, obtained during dismantling or demolition, shall be separated out and stacked properly as directed by the Engineer-in-Charge within a lead of 50 meters. All unserviceable materials, rubbish, etc., shall be disposed off at authorized locations by urban local bodies as directed by the Engineer-in-Charge.

Dismantling GI/GS roofing including ridges, hips, valleys, gutters, etc., and stacking the material within 50 metres lead of any serviceable material, obtained during dismantling or demolition, shall be separated out and stacked properly as directed by the Engineer-in-Charge within a lead of 50 meters. All unserviceable materials, rubbish, etc., shall be disposed of fat authorized locations by urban local bodies as directed by the Engineer-in-Charge.

Supplying, fabricating and fixing single skin trapezoidal profiled precoated coloured sheet of approved colour,shape and size for roofing, cladding, flashing, curves, gutters, etc., The sheet shall be of 930-1020mm cover width with 28-32mm crest depth at 186-250mm c/c manufactured out of 0.5mm (TCT) total coated thickness high tensile steel plain sheet with aluminum Zinc alloy coating substrate The profile and length of the sheet shall be to suit with site requirement. The steel base material shall have 550Mpa yield strength made out of cold rolled steel and shall be coated with anti corrosive layer of Zinc aluminum alloy coating,Zinc 43.5% and aluminium 55% with minimum 150 gms/m² mass total on both sides. All specials and accessories(such as Gutter & ridge shall be paid separately) should also be factory fabricated. All ridges/curves, gutters, flashing or any other covering shall be made out of same materials as that of roofing. The product shall be fastened using No.14-10X20mm (or as per design) galvanized hex-self drilling fasteners of appd. make and quality including neoprene washer connecting with purlins/pre cast RCC beam (purlins).

0.5mm (TCT ) Galvalume sheeting

Providing and fixing precoated galvalume steel sheet roofing accessory i.e Gutter 0.50mm (+0.05 %) total coated thickness, overall girth 600mm using self drilling / self tapping screws.

Providing and fixing precoated galvalume steel sheet roofing accessory i.e 0.50mm plain ridge of width 500-600mm (+0.05 %) total coated thickness using self drilling / self tapping screws.

Supplying and fixing of 2mm thick corrugated polycorbonate sheet of required size or colour including fastening it using No.14-10X20mm (or as per design) galvanized hex-self drilling fasteners of approved make and quality including neoprene washer connecting with purlins / pre cast RCC beam (purlins). All side & on each crest of sheet for end laps shall be adequate to make the roof leak proof, etc., all complete as directed by Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of size 230mm x 110mm x 70mm class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.

Cement mortar (1:6) 20mm thick finished with floating coat of neat cement (shall not be less than 1 kg per sqm) to the concrete or brick surfaces .The plaster shall be finsihed to true and plumb surface and to the proper degree of smoothness as required including scaffolding .

Demolishing brick work built in cement mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50meters lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50metres lead, etc., all complete as directed by Engineer-in-Charge.

Providing and Fixing on wall surface 160mm dia PVC pipes(self fit socket ) (SWR ) along with fittings , including fixing the pipe with clamps at 1.0m spacing to withstand a pressure of 6kgf/sqm complying with IS 4985 of approved manufacturer jointed with chemical solution for rain water, etc., all complete as directed by Engineer-in-Charge.

Supplying, fixing, Testing and Commissioning 610mm throat dia wind turbo roof top ventilators with bright aluminium curved vanes (0.50mm thick , 38nos) / fins stainless steel top cover mounted mounted on standard base sheet and fixed to galvalume / FRP sheet with necessary fasteners - Nuts & Bolts, Rivets (all built in), etc., all complete as directed by Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 i.e (1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%)) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.

Wall painting (2 coats) with premium acrylic emulsion paint of interior grade having VOC(Volatile Organic Compound ) content less than 50grams/litrs approved brand and manufacturer including additional coats wherever required to acheive even shade and colour, etc., all complete as directed by Engineer-in-Charge.

Painting 2 or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade on steel members, etc., all complete as directed by Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge.