1)Reorg. of OH line for lighting purpose including fabrication and errection of foot overbridge between two crussher (2)Fabrication and erection of shelter and lifting arrangment and dust supression set up ,at feeder breaker,AADOCM siding.

Amount

PART A: Reorganisation of OH line for lighting purpose including fabrication and errection of foot over bridge between two crussher of Railway siding of AADOCM,Dhori area.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X60 cm),7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1: 3: 6 (1cement: 3 coarses and: 6graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Erection of all aluminium conductor of 7/3.35 mm to 7/4.00 mm diameter and above including binding etc. as required.

Supplying and erection of 10 0mmX110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required

6 SWG Wire

Errection of creddle guard.

Shiftihng of pole from site to site.

Dismantling of pole embedded in cement concrete foundation etc. as required.

Dismantling of over head lines comprising of aluminium overhead conductor, G.I. wire, cross arms, insulators etc. as required

Supplying of channel iron 75mm X 40mm X 6mm (7.14 kg per metre)cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Fitting and fixing of lilght on pole (light deppt supply)

Removal of bolders manually from above the cable

Dismentaling of cable of 1.1.KV grade POVC insulated cable.

Laying and fixing of one no PVC insulated cable of 1.1 KV grade of 95 sq mm size and upto 185 sq mm

Removal of boulders manually from above the pipeline

Dismeantaling of 4 inch dia pipe line between 5 no. machine to 6 no. machine on non horizontal surface.

Laying of 4 inch pipeline line between 5 no machine to 6 no machine on newly made structure

Erection and fabrication of iron materials of different type like angle channel, plate joist etc. (Iron material departmentally supplied)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:.1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work.

Painting with aluminium paint of approved brand and manufacture to give an even shade

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

PART B: Fabrication and erection of shelter and lifting arrangment at feeder breaker of AADOCM Dhori for unloading and safe keeping of P&M items.

Erection and fabrication of iron materials of different type like angle channel, plate joist etc. (Iron material departmentally supplied)

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work.

Painting with aluminium paint of approved brand and manufacture to give an even shade

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal ofexcavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.

Dismantling and fitting of lifting arrangement along with alignment and setting.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved painton overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing flat iron brackets 50x3 mm size with necessary bolts,nuts and washers etc. for fixing G.S. sheets gutters with purlins.

Providing ridges or hips of width 60 cm over all width plain G.S.sheet fixed with polymer coated J or L hooks, bolt sand nuts 8 mm dia G. I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m²

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLSPV Cinsulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Fitting and fixing of light 50 to 100 W on structure in or out side of shed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

PART C: Fabrication of dust supression setup of AADOCM siding

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore

Making connection of G.I. distribution branch with Cl. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 50 to 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) : 80 mm nominal bore

Providing and fixing of sprinker 180 degree, 30 mtr radius, Al casting with gun metall interior

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Making connection of G.I. distribution branch with Cl. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES (BID ID -1109323)