SPECIAL REPAIR OF BLDG NO T-16 AND BLDG NO T-30, T-36 AND T-37(OR BATHROOM) AT MIL STN PATIALA UNDER GE(SOUTH) PATIALA

Amount

Dismantling CGI/asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete incl mS wind ties all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , unframed work in any position

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc.40 sq. cmand over in section , unframed work in any position

Dismantling/ Taking down framed wooden trusses exceeding 4.00m span bu not exceeding 8.00 m span and removimg from site complete.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.

Dismantling of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even without using extra cement,complete all as specified and directed.

M & L 10mm thick cement plastering in cement mortar 1:6 finishing even and smooth without using extra cement.

M&L for Cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, incl use and waste of all necessary form work complete all as specified and as directed.

M&L For Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-290 Gde E-165

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, wind Ties, and similar work conforming to Fe-290 Gde E-165

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L Preparing new steel surfaces and applying two coats of synthetic enamal paint over one coat of red oxide primer.

M & L for preparation of new plastered surface or unplastered surfaces of walls and applying two coats of cement based paint over one coat of alkali resistant cement priming paint all as specified and directed by Engr-in-Charge.

M & L for preparation of new plastered or unplastered surfaces of walls and applying two coat of Oil Bound Distemper over a coat of Chalk whitening / wall care putty with smooth surface complete all as specifie and directed

M & L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specifie and directed

M & L for preparation of old plastered or unplastered surfaces of walls byapplying two coat of white wash complete all as specifie and directed

Taking down chokhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames with shutters of any description (without taking off shutters from the frame) n exc 1.5 sqm each and removing from site.

M&L for Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 104.00X45.6X3mm/104x18.35x3mm and shutters made of 44.5x25.00x1.4mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including grill Al925 Alumigrill or Equivalent, 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified As per CE Chz Drg No WD-5323-01 (Arch) Sheet 7A/7 dt 02-06-21 including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

M&L for Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including toughened Glass 12mm below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

M&L for Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

M&L for Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and stainless steel wire gauge 0.36mm dia and 1.40 aperature below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge

M & L 50 mm thick Cement cincrete 1:3:6 type C-2 using 20mm graded crushed stone agg as in plinth protection including making joints between wall & plinth protection with sealing compounds. The edges of plinth protection shall be protected by compacted soil. The earth shall be dressed up to 3 m from the outer walls of the bldg so that ground slope of at least 1:80 (average) is achieved from outer edge of plinth protection finishing surface w/o using extra cement.

S&F Purpose made holding down bolts 12 mm dia with nuts and washers complete all specified and directed

M&L for Anodised aluminium snap grid frame work for false ceiling all as specified incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F for PVC insulation panels with EPS stuck to 10mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (20mm graded crushed stone aggregate) as in Sub base (below floor tiles).

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (20mm graded crushed stone aggregate) as in Sub base (below floor tiles).

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in Sub base (below floor tiles).

M&L for Providing and Laying ceramic glossy finish, joint free premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engr-in-Charge. Note : Dado should be flushed with the wall plastering.

M & L for Vitrified Ceramic tiles 8-9mm thick light colour (Square/ rectangular) polished, area of each tile 600 x 600 mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 15mm thick screed/ bedding layer in CM 1:4 complete all as specified and as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed/ bedding layer in CM 1:4 complete all as specified and as directed.

S & F Machine cut Kota stone slab flooring 20mm (+ 2mm) thick laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismentling Bricks (laid flat or on edge) or brick tiles laid dry or laid dry and pointed in floors, channels, kerbs, aprons, etc. (each layer) Complete all as specified and directed.

S & F precast concrete interlocking paver block any shape and size & incl 25mm thick layer of sand cushion complete all as specified and as directed. confirming to IS 15658-2006 of 60 mm thickness, M-35 grade

Providing and laying Chequered cement concrete tiles 20cm x 20cm x 25mm thick with gray cement and pigment, set, jointed and pointed in neat cement bslurry in floors over 15mm thick 1:4 Cement mortar Screed bed complete all as specified and directed by Engr-in-Charge.

S &F in repair PVC (SWR) pipe110 mm bore Rain water pipe single socketed in any length with rubber ring joints, in Floors.

M&L for Steel windows or ventilators, fixed type, with glazing bars complete as per Drg ref by Engr-in-Charge

S&F Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

Taking up or down steel tubing 15 mm bore or connection, incl cleaning pipe for checking its serviceability for re-fixing or otherwise for removal from site or to store complete all as directed by Engineer incharge.

S&F Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing 20 mm bore or connection, incl cleaning pipe for checking its serviceability for re-fixing or otherwise for removal from site or to store complete all as directed by Engineer incharge.

S&F Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs Bib tap cast long body copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe fixed as in repairs complete all as specified.

S&F in repairs Stop valve, cast copper alloy, screwed down, high pressure, with cutch or butterfly handle, screwed both ends for iron pipes or for union and fixed for 20mm bore as in repair complete all as specified

S&F Stop cock fancy type, brass chromium plated with long shank and cup (concealed type) 15 mm bore fixed in repair complete all as specified

S&F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified

S&Fix in repair Rotational moulded polythene water storage tanks of capacity 1000 lit, hoisted and fixed in position including 20mm bore brass ball valve high pressure with polythene float and fly nut incl 32mm dia wash out with plug complete including dismantling of old water tank of any size or specification complete all as specified and directed.

S&F in repairs450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level 10 ltr capicity Dual Flush Mechanic incl, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified incl taking down any type of flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed by Engr-in-Charge.

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) , complete all as specified and as directed.

S&F Vitreous china wash hand basin off white flat back size 550 x 400mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, cast iron brackets incl CP pillar Taps 15 mm bore and PCC 1:2:4 type B-I using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM 1:3 complete fixed as in repair, all as specified and directed.

S&F Viterous china squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc fixed as in repair complete all as specified and fixed in repairs

S&F Cast iron soil waste and vent pipe of bore 100mm centrifugally cast, ISI marked, in any length with or without ears with and including run lead joints laid in trenches or in floors fixed in repairs complete all as specified and directed.

- ditto- but of bore 75mm

S&F Cast iron soil waste and vent pipe of bore 100mm centrifugally cast, ISI marked, in any length with or without ears with run lead joints fixed to wall fixed in repairs complete all as specified and directed.

S&F in repairs Cast iron floor trap with 75mm dia of out let with stainless steel grating incl jointing to waste pipe in run lead.

S&F Cast iron branch pieces double, (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches, suitable for 100mm bore pipe, as in repairs, jointed in run lead all as specified and directed.

S&F Special type cast iron ‘P’ or ‘S’ trap having 300mm to 450mm long tail suitable for 100mm dia CI pipe incl jointing to waste pipe in run lead fixed as in repair complete all as specified and directed.

CI cowl of 100mm dia.

S&F Cast iron bends (any radius) diminishing pieces or tapers of size of 75mm fitted with oval access door, fixed in repairs complete all as specified and directed.

S&F Cast iron bends (any radius) with ducks foot or heel rest, Tee, CI Cross of size of 100mm fixed in repairs complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.

S&F Factory Made Solid PVC Moulded Door Shutter with particla board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 100mm size PVC butt hinges all as specified.

S&F 25mm size PVC handles all as specified and directed.

S&F 200mm long PVC tower bolt all as specified and directed.

Excavation in trenches soft loose soil not exeding 1.5 m deep and not exeeding 1.5m in depth for foundation etc.

Returning filling in including spreading leveling watering and well ramming in layers not exc. 25 cm soft/looose soil.

Taking down carefully existing points wiring conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring) Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost.

All as per Sl item No 78 above herein before but one 5Amp socket point on independent board complete all as specified and directed.

All as per Sl item No 78 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 78 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm copper conductor (multi-stranded) PVC insulated electric cable 1100 volts (ISI Marked) including 2.5 sqmm PVC insulated and unsheathed FRLSH single core stranded copper as earth continuity conductor complete all as specified and directed.

M&L Modular switch 1 way, 6 Amps, 1 module complete all as specified.

M&L Modular switch 1 way, 16 Amps, 1 module complete all as specified.

M&L Modular socket 3/5 pin 6 Amps, 2 module with shutter complete all as specified.

M&L Modular socket 3 pin 6/16 Amps, combination type with shutter 2 module complete all as specified.

M&L ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed.

Supply & fix in replacement of existing unserviceable batten fitting with LED batten fitting of 20W, 4 feet long of extruded thermoplastic body with PC diffuser, isolated body environmental friendly energy efficient including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface.

All as per item No 87 above but with LED batten fitting of 10W, 2 feet long all as specified and directed.

S & F fan regulator modular type 1 module complete all as directed by the Engineer-in-Charge.

Supply and fix in replacement ceiling mounted slim LED panel white powder coated aluminium square body of 2x2 size of 36/40Watt light fitting incl connecting with 3 core flexible wire 0.5 sqmm copper cable from ceiling light all as directed by the Engineer-in-Charge. Make-Havells, Cat No- LHEBAEP5PV1W036 or equivalent as mentioned hereinafter.

S&F in replacement MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP54 protection complete all as specefied and directed. Note : i) Eye/bottle thimbles shall be used for connection in MCB's in DB's without any extra cost.

S&F in replacement MCB , SPN, 240 Volt ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed.

S&F in replacement MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed.

S & F in replacement energy saving and environmental friendly long life LED Bldg security light 35 Watt made up of pressure die cast alluminium housing with high power LEDs having top opening seperate driver compartment with IP65 protection and impact resistance of IK07, including all connecting acessories including 32 mm bore light grade GI pipe bend to shape including MS clamps of required size for fixing of Light on wall complete all as specified by Eng-in-Charge.

S & F in replacement Decorative globe light made up of high grade unbreakable polycarbonate material with holder suitable for mounting of 14/20 Watt LED bulb including MS pipe of 32/40mm bore of 1 mtr for mounting globe light including making all electrical connection complete all as specified by Eng-in-Charge.

M&L in replacement Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation, retuning filling, Removal of surplus soil, charcoal and common salt mixed refilling of soil etc all included complete all as directed.

M&L exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers, BEE, five star rated including fixing the fan with all connecting accessories and making electric connection from c/rose etc. Old u/s E/Fan to be deposited in MES store. Note:- Fixing of Exhaust Fan on wall with suitable size anchor bolt, making hole in wall for grouting and making good the disturbed surface including plaster work shall be part of job at no extra cost. Note:- Old u/s C/Fan to be deposited in MES store.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size10 sq mm 2 core after taking out old one all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and directed.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm for cable protection all as specified and directed.

M&L in replacement Galvanised steel tubes, light grade for cable protection laid in trench or concelled or fixed in wall all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all connecting accessories such as safety valve, thermostate, NRV, PVC/CP connection pipe of superior quality suitable for hot & Cold water including hanging/fixing the same on wall with suitable size anchor bolt and making good the disturbed surface including plaster work shall be part of job at no extra cost.

S&F stop valve, fancy type chromimum plate angle valve with crunch handle or butterfly handle screwed down high pressure suitable for 15mm bore GI pipewith screwed both ends for GI pipe or for union of 15 mm dia including necessary cutting existing GI water pipe for insertion of stop valve and connected fittings, including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Bib tap brass chromium plated fancy type screwed down suitable for 15mm GI pipe with necessary fittings complete all as specified and directed.

Supply and laying GI tubing 'Medium grade' 15mm bore with all necessary fittings like elbow, reducer, T-joint, nipple and passing through brick, walls, ceilling or lay in floor including tapping from existing lines and necessary cutting, repairing and making good disturbed surface with cement morter 1:3 including white wash/distamper as existing to match existing wall etc. complete all as specified and directed.

M&L for Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote control all as directed by the Engineer-in-Charge. Note:- Old u/s C/Fan to be deposited in MES store.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 2.5 Sqmm multi -strand copper conductor drawing in PVC conduit heavy duty duly fixed with S/S clamp at every 1 mtr intervel with 2.5 Sqmm PVC copper conductor cable as in earth wire system, including taking out old wiring complete all as directed by the Engineer-in-Charge. Note: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

SWAMI ENGINEERS

ANIL KUMAR AND CO

Arneja Builders

AR CONSTRUCTIONS

M/S Mukesh Kumar Gupta

Buttar Construction Co.

DELTA CONSTRUCTION CO