ReConstruction of ICDS Center at Mouza Kumarpur

Page No.- 47, Item No.- 3

Supplying and laying polythine sheet ( 150 gm/sq.m ) over dampproof course or beloe flooring or roof terracing or foundation or foundation trenches.

Page No.- 23, Item No.- 1(a)( rate analysis)

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (a) 1:3:6 proportion.

Page No.- 15, Item No.- 7(a) (rate analysis)

Brick work with 1st class bricks in cement mortar (1:4) (a) Foundation and plinth groung floor

P.W.D, Page No.- 26, Item no.- 10(i)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Page No.-16, Item No.- 16 (rate analysis)

125 mm brick work with 1st classbricks in cement morter ( 1:4) in ground floor.

P.W.D, Page No.- 43, Item no.- 40 (i)(I).

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m. (i)Tor steel JSW/JSPL/SHYAM/SRMB/BMASL/ELETROSTEEL/ SSL

Page No.- 48, Item No.- 6(ii) (rate analysis)

Artificial stone in floor ,dado,staircaseetc with cement morter (1:2:4)with stone chips lsied in panels as directed with topping made with ordinary or white cement (as necessary) and marbel dust in proportion (1:2) in cluding smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/ sq.m all complete including all materials and labour. In ground floor 3 mm thick topping using gray cement (ii)25 mm

Page No.- 189, Item No.-1(i)© (rate analysis)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster inside

Outside

Page No.- 192, Item No.-15 (rate analysis)

Neat cement punning about 1.5 mm thick in wall ,dado, window sills, floors etc .

Page No.- 114, Item No.-01(f)

Wood work in door & window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame. ( b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. In Ground Floor

Page No.- 117, Item No.-01

Panel shutter for door and windows as per design (each panel consisting of single plank with out jionts) including ....... fittings- 35mm thick shutters with 19mm thick panel. ( b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. In Ground Floor

Page No.- 104, Item No.-13

M.S./W.I. ornamental grill of approved design joints contineously welded fitted & fixed with necessary screws & lugs. ( ii ) Weighing above 16 kg/ sqm In Ground Floor

Page No.- 101, Item No.-2A

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works a) Span up to 12 Mtr

Page No.-82, Item no.- 14.

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet

Page No.-82, Item no.- 11(b).

Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design,bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping) (b) 300 mm. wide gutter

Page No.- 200, Item no.- 1(a).

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Page No.- 200, Item no.- 2(A)(b)(ii).

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On steel or other metal surface. Two coats ( with any shade exept white)

Page No.- 200, Item no.- 1(b).

( a )Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality For timber surface

Page No.- 200, Item no.- 2(iv).

Painting with best quality synthetic enamel paint of approved make and brand with two coats super gloss any shade except white. (a ) On timber surface

Page No.- 196, Item no.- 10.

Acrylic Distemper to interior walls or celling... incl cleaning washing smoothening surface (b) 2 coats

Page No.- 196, Item no.- 08.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface…. Complete as per manufacturer's specification and as per direction of EIC. (a) One coat In G.F.

Page No.- 197, Item no.- 17.

Protective and Decorative Arcylic exterior emulsion paint of approved quality, ,,, as per direction of EIC to be applied over acrylic primer as required. (a)Normal acrylic emulsion ( Outside wall )

P.W.D (Roads)Page No.- 270/ Item No. - 8.07

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)

Add GST @ 18% ( Sl. No.- 1 to 23)

Add Labour welfare Cess @1% (Sl.No.-1 To 24)