PROVN OF EXHAUST AND CEILING FANS AT MIL STN DAPPAR

Amount

Material & Labour for Point wiring complete with 1.5 sqmm (nominal area) PVC insulated unsheathed multistranded copper condutor single core cable 1100 volts grade FRLSH ISI marked drawn through and including non metalic PVC conduit, ISI marked of not less than 20 mm dia, medium grade, concealed in wall, roof/ on the surface along the roof as per requiremnt at site etc, with all connected fittings including MODULAR WHITE COVER PLATE WITH FRAME - 1 module/ 2 module/3 module/4 module/6 module/8 module/12 module, etc., MODULAR METAL FLUSH BOX - 1 module/ 2 module/3 module/4 module/6 module/8 module/12 module, etc., and including FRLSH PVC insulated unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings including connected to near by switch board as specified and directed for the following:- Note:- Modular switches, sockets, ceiling rose, regulators, etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall. (a) One light / fan / point controlled by one switch

Supply and Fixing Modular switch 1 way 6 A, 1 module type single pole 240 volts and complete all as specified and directed

Supply and fixing ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed

Material & Labour for making opening in existing wall of stone/ brick massonary by taking out stones/ bricks carefully and plasterring inside in circular shape as required at site to match the frame of exhaust fan including grouting 04 Nos of bolts in existing wall to hold the frame of fan firmly with wall and making good disturbed surfaces of wall to match the existing wall as directed at site

Supply and Fixing pipe galvanized, “Medium grade”, including fittings 40 mm dia for hanging of ceiling fan and making holes in walls for insertion of pipe and making good disturbed surface as per existing finishes all as directed and specified

Supply and Fixing pipe galvanized “Medium grade”, including fittings 25mm dia.all as directed and specified Note for Sr item No 5 & 6 :- Masonary works for fixing of GI Pipe both side of wall and making good disturbed surface as per existing finish is deemed to be included in quoted rate.

Supply and Fixing ceiling fans complete with blades, hanging rods , electronic regulator and accessories , 230V, 1200mm sweep without remote, Min air delivery 210 CFM with service value 6.00 BEE 5 Star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Material & Labour MS work (clamp, Hook , nuts, botls for ceiling fan & exhaust fan) etc welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint for hanging with of Ceiling Fan all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering Metal complete ( Steel Body) with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450mm heavy duty complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering Metal complete ( Steel Body) with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed

bharat contrectors (BID ID -3206210)

power house batteries (BID ID -3212021)

HARISH SALES CORPORATION (BID ID -3204851)