Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹30.1 L
EMD Value
₹30,100
Closing Date
14 Mar 2024, 11:00 amClosed
Block Development officer
Block Development officer Thiruvaiyaru 613204
Package No 23 Construction of Panchayat Office Building at Kandiyur Panchayat Thiruvaiyaru Block under AGAMT II 2024 2025
2024_RDTN_444664_25
RC211/2024/B4
Open Tender
Civil Works
Item Rate
120 days
Block Development officer
AS per tender
8 documents required · 8 mandatory
₹0
₹30,100
Yes
15 Mar 2024
8 Mar 2024
14 Mar 2024
8 Mar 2024
14 Mar 2024
8 Mar 2024
Amount
kandiyur Panchayat .
Construction Panchayat Office Building at Kandiyur Panchayat
Earth work excavation in all class of Soil except hard rock requiring blasting with intial lead and lift etc. Complete for foundation as per SS 20B.
Collection and supply of M.sand and filling in to the basement including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete (Below Basement)
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete (Above Basement)
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete (Above Basement)
Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).
Grade Beam
Column GF
Reinforced cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of work excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clabs in the RCC floor or roof slabs wherever necessary and bearing surface of walls sides and bottom of the slabs beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick and with kraft paper witout claming extra as directed by the departmental officers complete complying with standard specification
Footing.
Grade Beam
Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.
Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing laying and finishing etc., complete for 10 cm
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Providing granolithic flooring with CC 1:2:4 mix 25 mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Paving the Floor with Vitrified tiles in CM 1:3 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution.
Plastering with CM 1:3,10mm thick including cost and conveyance of all materials to site and all labour charges etc.,complete
Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete
White wash two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc complete
Exterior emulsion two coats over priming coat including cost and conveyance of all materilas to site and all labour charges etc complet
Distempering two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete
Supplying and fixing pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Mannually operated) upto 8 sqmm
Fabrication and supply & Delivery of MILD STEEL DOORS/WINDOWS of the following sizes with Single Leaf outer frame made of 35x35x5 mm equal M.S L angle and shutter frame made of 25 x25 x5mm equal M.S. L angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2 Nos. Horizontal and 3 Nos. diagonal using MS flat of size 20x5mm fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of holdfasts made of 35x35x5 mm equal M.S L angle, 1 No. of wind appliance, 2 Nos. of tower bolts,1 No of aldrop,2 Nos of handles, fixing the shutter with 6 Nos. of 6 inch hinges with outer frame of the door including painting the whole unit with one coat of best quality of red oxide primer etc., complete
Fabrication, supply and fixing of Stainless steel 304 grade hand rail in all aspects as directed by the departmental officers
Painting two coats over new iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete
Supplying and fixing in position of Indian water closet 580x440mm of approved quality including cost and conveyance of materials and all labour charges etc., complete
Supplying and fixing in position of Europian water closet of approved quality including cost and conveyance of materials and all labour charges etc., complete
Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary TW clamps, plug, shoes, bend, secrews, nail etc complete
Wiring 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V garde insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point/fan point (for electorinic regulator) (5 points per cil) (SD 18)
Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3pin non interlocking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38)
Supply and run of 2 of 6 Sq.mm (84/0.30) PVC insuitable SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 66)
Supply and run of 2 of 1.5 Sq.mm (22/0.30) PVC insuitable SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class'B') suitable bent at both ends with necessary angle iron upright and end supports for mains (SD 69)
Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for suitable for 11W CFL lamp with CFL (SD 83).
Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electorinc 300W regulator with 300mm down rod on the existing clamp(SD110
Supply and fixing of Single box type 4'40W fluorescent fitting complete wit copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting (SD 88))
Supplying and fxing PVC Storage tank including all charges etc complete
Paver Block
Earth work excavation in all class of Soil except hard rock requiring blasting with intial lead and lift etc. Complete for foundation as per SS 20 B
Sand filling with good river sand including cost , conveyance of all labour charges etc., Complete
C.C.1:4:8 Mix using 40mm HBG metal including cost & conveyance & Labour charges etc, Complete.,.
Supply and erection of steel centering including cost & conveyance & Labour charge etc. complete.
C.C.1:3:6 Mix using 20mm HBG metal including cost & conveyance & Labour charges etc, Complete.,.
Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .
Providing and Laying of Interlocking concrete Block Pavements specification clause 1504 using M30 grade rupper moduled interlocking 60 mm thickness paver block
Provision for Name board charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
DHARMARAJ MATHIYAZHAGAN
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .